Commit a1870b9c authored by David S. Miller's avatar David S. Miller
parents 6cc90a5a 1fa6f4af
...@@ -3,9 +3,8 @@ rfkill - RF kill switch support ...@@ -3,9 +3,8 @@ rfkill - RF kill switch support
1. Introduction 1. Introduction
2. Implementation details 2. Implementation details
3. Kernel driver guidelines 3. Kernel API
4. Kernel API 4. Userspace support
5. Userspace support
1. Introduction 1. Introduction
...@@ -19,82 +18,62 @@ disable all transmitters of a certain type (or all). This is intended for ...@@ -19,82 +18,62 @@ disable all transmitters of a certain type (or all). This is intended for
situations where transmitters need to be turned off, for example on situations where transmitters need to be turned off, for example on
aircraft. aircraft.
The rfkill subsystem has a concept of "hard" and "soft" block, which
differ little in their meaning (block == transmitters off) but rather in
whether they can be changed or not:
- hard block: read-only radio block that cannot be overriden by software
- soft block: writable radio block (need not be readable) that is set by
the system software.
2. Implementation details 2. Implementation details
The rfkill subsystem is composed of various components: the rfkill class, the The rfkill subsystem is composed of three main components:
rfkill-input module (an input layer handler), and some specific input layer * the rfkill core,
events. * the deprecated rfkill-input module (an input layer handler, being
replaced by userspace policy code) and
The rfkill class is provided for kernel drivers to register their radio * the rfkill drivers.
transmitter with the kernel, provide methods for turning it on and off and,
optionally, letting the system know about hardware-disabled states that may
be implemented on the device. This code is enabled with the CONFIG_RFKILL
Kconfig option, which drivers can "select".
The rfkill class code also notifies userspace of state changes, this is
achieved via uevents. It also provides some sysfs files for userspace to
check the status of radio transmitters. See the "Userspace support" section
below.
The rfkill core provides API for kernel drivers to register their radio
transmitter with the kernel, methods for turning it on and off and, letting
the system know about hardware-disabled states that may be implemented on
the device.
The rfkill-input code implements a basic response to rfkill buttons -- it The rfkill core code also notifies userspace of state changes, and provides
implements turning on/off all devices of a certain class (or all). ways for userspace to query the current states. See the "Userspace support"
section below.
When the device is hard-blocked (either by a call to rfkill_set_hw_state() When the device is hard-blocked (either by a call to rfkill_set_hw_state()
or from query_hw_block) set_block() will be invoked but drivers can well or from query_hw_block) set_block() will be invoked for additional software
ignore the method call since they can use the return value of the function block, but drivers can ignore the method call since they can use the return
rfkill_set_hw_state() to sync the software state instead of keeping track value of the function rfkill_set_hw_state() to sync the software state
of calls to set_block(). instead of keeping track of calls to set_block(). In fact, drivers should
use the return value of rfkill_set_hw_state() unless the hardware actually
keeps track of soft and hard block separately.
The entire functionality is spread over more than one subsystem:
* The kernel input layer generates KEY_WWAN, KEY_WLAN etc. and
SW_RFKILL_ALL -- when the user presses a button. Drivers for radio
transmitters generally do not register to the input layer, unless the
device really provides an input device (i.e. a button that has no
effect other than generating a button press event)
* The rfkill-input code hooks up to these events and switches the soft-block
of the various radio transmitters, depending on the button type.
* The rfkill drivers turn off/on their transmitters as requested.
* The rfkill class will generate userspace notifications (uevents) to tell
userspace what the current state is.
3. Kernel API
3. Kernel driver guidelines
Drivers for radio transmitters normally implement an rfkill driver.
Drivers for radio transmitters normally implement only the rfkill class.
These drivers may not unblock the transmitter based on own decisions, they
should act on information provided by the rfkill class only.
Platform drivers might implement input devices if the rfkill button is just Platform drivers might implement input devices if the rfkill button is just
that, a button. If that button influences the hardware then you need to that, a button. If that button influences the hardware then you need to
implement an rfkill class instead. This also applies if the platform provides implement an rfkill driver instead. This also applies if the platform provides
a way to turn on/off the transmitter(s). a way to turn on/off the transmitter(s).
During suspend/hibernation, transmitters should only be left enabled when For some platforms, it is possible that the hardware state changes during
wake-on wlan or similar functionality requires it and the device wasn't suspend/hibernation, in which case it will be necessary to update the rfkill
blocked before suspend/hibernate. Note that it may be necessary to update core with the current state is at resume time.
the rfkill subsystem's idea of what the current state is at resume time if
the state may have changed over suspend.
To create an rfkill driver, driver's Kconfig needs to have
4. Kernel API depends on RFKILL || !RFKILL
To build a driver with rfkill subsystem support, the driver should depend on to ensure the driver cannot be built-in when rfkill is modular. The !RFKILL
(or select) the Kconfig symbol RFKILL. case allows the driver to be built when rfkill is not configured, which which
case all rfkill API can still be used but will be provided by static inlines
The hardware the driver talks to may be write-only (where the current state which compile to almost nothing.
of the hardware is unknown), or read-write (where the hardware can be queried
about its current state).
Calling rfkill_set_hw_state() when a state change happens is required from Calling rfkill_set_hw_state() when a state change happens is required from
rfkill drivers that control devices that can be hard-blocked unless they also rfkill drivers that control devices that can be hard-blocked unless they also
...@@ -105,10 +84,33 @@ device). Don't do this unless you cannot get the event in any other way. ...@@ -105,10 +84,33 @@ device). Don't do this unless you cannot get the event in any other way.
5. Userspace support 5. Userspace support
The following sysfs entries exist for every rfkill device: The recommended userspace interface to use is /dev/rfkill, which is a misc
character device that allows userspace to obtain and set the state of rfkill
devices and sets of devices. It also notifies userspace about device addition
and removal. The API is a simple read/write API that is defined in
linux/rfkill.h, with one ioctl that allows turning off the deprecated input
handler in the kernel for the transition period.
Except for the one ioctl, communication with the kernel is done via read()
and write() of instances of 'struct rfkill_event'. In this structure, the
soft and hard block are properly separated (unlike sysfs, see below) and
userspace is able to get a consistent snapshot of all rfkill devices in the
system. Also, it is possible to switch all rfkill drivers (or all drivers of
a specified type) into a state which also updates the default state for
hotplugged devices.
After an application opens /dev/rfkill, it can read the current state of
all devices, and afterwards can poll the descriptor for hotplug or state
change events.
Applications must ignore operations (the "op" field) they do not handle,
this allows the API to be extended in the future.
Additionally, each rfkill device is registered in sysfs and there has the
following attributes:
name: Name assigned by driver to this key (interface or driver name). name: Name assigned by driver to this key (interface or driver name).
type: Name of the key type ("wlan", "bluetooth", etc). type: Driver type string ("wlan", "bluetooth", etc).
state: Current state of the transmitter state: Current state of the transmitter
0: RFKILL_STATE_SOFT_BLOCKED 0: RFKILL_STATE_SOFT_BLOCKED
transmitter is turned off by software transmitter is turned off by software
...@@ -117,7 +119,12 @@ The following sysfs entries exist for every rfkill device: ...@@ -117,7 +119,12 @@ The following sysfs entries exist for every rfkill device:
2: RFKILL_STATE_HARD_BLOCKED 2: RFKILL_STATE_HARD_BLOCKED
transmitter is forced off by something outside of transmitter is forced off by something outside of
the driver's control. the driver's control.
claim: 0: Kernel handles events (currently always reads that value) This file is deprecated because it can only properly show
three of the four possible states, soft-and-hard-blocked is
missing.
claim: 0: Kernel handles events
This file is deprecated because there no longer is a way to
claim just control over a single rfkill instance.
rfkill devices also issue uevents (with an action of "change"), with the rfkill devices also issue uevents (with an action of "change"), with the
following environment variables set: following environment variables set:
...@@ -128,9 +135,3 @@ RFKILL_TYPE ...@@ -128,9 +135,3 @@ RFKILL_TYPE
The contents of these variables corresponds to the "name", "state" and The contents of these variables corresponds to the "name", "state" and
"type" sysfs files explained above. "type" sysfs files explained above.
An alternative userspace interface exists as a misc device /dev/rfkill,
which allows userspace to obtain and set the state of rfkill devices and
sets of devices. It also notifies userspace about device addition and
removal. The API is a simple read/write API that is defined in
linux/rfkill.h.
...@@ -733,8 +733,9 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) ...@@ -733,8 +733,9 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
/* /*
* Set the beacon register and enable all timers. * Set the beacon register and enable all timers.
*/ */
/* When in AP mode zero timer0 to start TSF */ /* When in AP or Mesh Point mode zero timer0 to start TSF */
if (ah->ah_op_mode == NL80211_IFTYPE_AP) if (ah->ah_op_mode == NL80211_IFTYPE_AP ||
ah->ah_op_mode == NL80211_IFTYPE_MESH_POINT)
ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
......
config ATH9K config ATH9K
tristate "Atheros 802.11n wireless cards support" tristate "Atheros 802.11n wireless cards support"
depends on PCI && MAC80211 && WLAN_80211 depends on PCI && MAC80211 && WLAN_80211
depends on RFKILL || RFKILL=n
select ATH_COMMON select ATH_COMMON
select MAC80211_LEDS select MAC80211_LEDS
select LEDS_CLASS select LEDS_CLASS
......
...@@ -21,7 +21,6 @@ ...@@ -21,7 +21,6 @@
#include <linux/device.h> #include <linux/device.h>
#include <net/mac80211.h> #include <net/mac80211.h>
#include <linux/leds.h> #include <linux/leds.h>
#include <linux/rfkill.h>
#include "hw.h" #include "hw.h"
#include "rc.h" #include "rc.h"
...@@ -460,12 +459,6 @@ struct ath_led { ...@@ -460,12 +459,6 @@ struct ath_led {
bool registered; bool registered;
}; };
struct ath_rfkill {
struct rfkill *rfkill;
struct rfkill_ops ops;
char rfkill_name[32];
};
/********************/ /********************/
/* Main driver core */ /* Main driver core */
/********************/ /********************/
...@@ -505,7 +498,6 @@ struct ath_rfkill { ...@@ -505,7 +498,6 @@ struct ath_rfkill {
#define SC_OP_PROTECT_ENABLE BIT(6) #define SC_OP_PROTECT_ENABLE BIT(6)
#define SC_OP_RXFLUSH BIT(7) #define SC_OP_RXFLUSH BIT(7)
#define SC_OP_LED_ASSOCIATED BIT(8) #define SC_OP_LED_ASSOCIATED BIT(8)
#define SC_OP_RFKILL_REGISTERED BIT(9)
#define SC_OP_WAIT_FOR_BEACON BIT(12) #define SC_OP_WAIT_FOR_BEACON BIT(12)
#define SC_OP_LED_ON BIT(13) #define SC_OP_LED_ON BIT(13)
#define SC_OP_SCANNING BIT(14) #define SC_OP_SCANNING BIT(14)
...@@ -591,7 +583,6 @@ struct ath_softc { ...@@ -591,7 +583,6 @@ struct ath_softc {
int beacon_interval; int beacon_interval;
struct ath_rfkill rf_kill;
struct ath_ani ani; struct ath_ani ani;
struct ath9k_node_stats nodestats; struct ath9k_node_stats nodestats;
#ifdef CONFIG_ATH9K_DEBUG #ifdef CONFIG_ATH9K_DEBUG
...@@ -677,6 +668,7 @@ static inline void ath9k_ps_restore(struct ath_softc *sc) ...@@ -677,6 +668,7 @@ static inline void ath9k_ps_restore(struct ath_softc *sc)
if (atomic_dec_and_test(&sc->ps_usecount)) if (atomic_dec_and_test(&sc->ps_usecount))
if ((sc->hw->conf.flags & IEEE80211_CONF_PS) && if ((sc->hw->conf.flags & IEEE80211_CONF_PS) &&
!(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON | !(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
SC_OP_WAIT_FOR_CAB |
SC_OP_WAIT_FOR_PSPOLL_DATA | SC_OP_WAIT_FOR_PSPOLL_DATA |
SC_OP_WAIT_FOR_TX_ACK))) SC_OP_WAIT_FOR_TX_ACK)))
ath9k_hw_setpower(sc->sc_ah, ath9k_hw_setpower(sc->sc_ah,
......
...@@ -2186,6 +2186,18 @@ static void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan ...@@ -2186,6 +2186,18 @@ static void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan
REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
} }
static void ath9k_enable_rfkill(struct ath_hw *ah)
{
REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
AR_GPIO_INPUT_MUX2_RFSILENT);
ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
}
int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
bool bChannelChange) bool bChannelChange)
{ {
...@@ -2313,10 +2325,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, ...@@ -2313,10 +2325,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
ath9k_hw_init_interrupt_masks(ah, ah->opmode); ath9k_hw_init_interrupt_masks(ah, ah->opmode);
ath9k_hw_init_qos(ah); ath9k_hw_init_qos(ah);
#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT) if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
ath9k_enable_rfkill(ah); ath9k_enable_rfkill(ah);
#endif
ath9k_hw_init_user_settings(ah); ath9k_hw_init_user_settings(ah);
REG_WRITE(ah, AR_STA_ID1, REG_WRITE(ah, AR_STA_ID1,
...@@ -3613,20 +3624,6 @@ void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val) ...@@ -3613,20 +3624,6 @@ void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val)
AR_GPIO_BIT(gpio)); AR_GPIO_BIT(gpio));
} }
#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
void ath9k_enable_rfkill(struct ath_hw *ah)
{
REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
AR_GPIO_INPUT_MUX2_RFSILENT);
ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
}
#endif
u32 ath9k_hw_getdefantenna(struct ath_hw *ah) u32 ath9k_hw_getdefantenna(struct ath_hw *ah)
{ {
return REG_READ(ah, AR_DEF_ANTENNA) & 0x7; return REG_READ(ah, AR_DEF_ANTENNA) & 0x7;
......
...@@ -565,9 +565,6 @@ u32 ath9k_hw_gpio_get(struct ath_hw *ah, u32 gpio); ...@@ -565,9 +565,6 @@ u32 ath9k_hw_gpio_get(struct ath_hw *ah, u32 gpio);
void ath9k_hw_cfg_output(struct ath_hw *ah, u32 gpio, void ath9k_hw_cfg_output(struct ath_hw *ah, u32 gpio,
u32 ah_signal_type); u32 ah_signal_type);
void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val); void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val);
#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
void ath9k_enable_rfkill(struct ath_hw *ah);
#endif
u32 ath9k_hw_getdefantenna(struct ath_hw *ah); u32 ath9k_hw_getdefantenna(struct ath_hw *ah);
void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna); void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna);
bool ath9k_hw_setantennaswitch(struct ath_hw *ah, bool ath9k_hw_setantennaswitch(struct ath_hw *ah,
......
...@@ -231,6 +231,19 @@ static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band) ...@@ -231,6 +231,19 @@ static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
} }
} }
static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc,
struct ieee80211_hw *hw)
{
struct ieee80211_channel *curchan = hw->conf.channel;
struct ath9k_channel *channel;
u8 chan_idx;
chan_idx = curchan->hw_value;
channel = &sc->sc_ah->channels[chan_idx];
ath9k_update_ichannel(sc, hw, channel);
return channel;
}
/* /*
* Set/change channels. If the channel is really being changed, it's done * Set/change channels. If the channel is really being changed, it's done
* by reseting the chip. To accomplish this we must first cleanup any pending * by reseting the chip. To accomplish this we must first cleanup any pending
...@@ -283,7 +296,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, ...@@ -283,7 +296,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
"reset status %d\n", "reset status %d\n",
channel->center_freq, r); channel->center_freq, r);
spin_unlock_bh(&sc->sc_resetlock); spin_unlock_bh(&sc->sc_resetlock);
return r; goto ps_restore;
} }
spin_unlock_bh(&sc->sc_resetlock); spin_unlock_bh(&sc->sc_resetlock);
...@@ -292,14 +305,17 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, ...@@ -292,14 +305,17 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
if (ath_startrecv(sc) != 0) { if (ath_startrecv(sc) != 0) {
DPRINTF(sc, ATH_DBG_FATAL, DPRINTF(sc, ATH_DBG_FATAL,
"Unable to restart recv logic\n"); "Unable to restart recv logic\n");
return -EIO; r = -EIO;
goto ps_restore;
} }
ath_cache_conf_rate(sc, &hw->conf); ath_cache_conf_rate(sc, &hw->conf);
ath_update_txpow(sc); ath_update_txpow(sc);
ath9k_hw_set_interrupts(ah, sc->imask); ath9k_hw_set_interrupts(ah, sc->imask);
ps_restore:
ath9k_ps_restore(sc); ath9k_ps_restore(sc);
return 0; return r;
} }
/* /*
...@@ -1110,6 +1126,9 @@ void ath_radio_enable(struct ath_softc *sc) ...@@ -1110,6 +1126,9 @@ void ath_radio_enable(struct ath_softc *sc)
ath9k_ps_wakeup(sc); ath9k_ps_wakeup(sc);
ath9k_hw_configpcipowersave(ah, 0); ath9k_hw_configpcipowersave(ah, 0);
if (!ah->curchan)
ah->curchan = ath_get_curchannel(sc, sc->hw);
spin_lock_bh(&sc->sc_resetlock); spin_lock_bh(&sc->sc_resetlock);
r = ath9k_hw_reset(ah, ah->curchan, false); r = ath9k_hw_reset(ah, ah->curchan, false);
if (r) { if (r) {
...@@ -1162,6 +1181,9 @@ void ath_radio_disable(struct ath_softc *sc) ...@@ -1162,6 +1181,9 @@ void ath_radio_disable(struct ath_softc *sc)
ath_stoprecv(sc); /* turn off frame recv */ ath_stoprecv(sc); /* turn off frame recv */
ath_flushrecv(sc); /* flush recv queue */ ath_flushrecv(sc); /* flush recv queue */
if (!ah->curchan)
ah->curchan = ath_get_curchannel(sc, sc->hw);
spin_lock_bh(&sc->sc_resetlock); spin_lock_bh(&sc->sc_resetlock);
r = ath9k_hw_reset(ah, ah->curchan, false); r = ath9k_hw_reset(ah, ah->curchan, false);
if (r) { if (r) {
...@@ -1178,8 +1200,6 @@ void ath_radio_disable(struct ath_softc *sc) ...@@ -1178,8 +1200,6 @@ void ath_radio_disable(struct ath_softc *sc)
ath9k_ps_restore(sc); ath9k_ps_restore(sc);
} }
#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
/*******************/ /*******************/
/* Rfkill */ /* Rfkill */
/*******************/ /*******************/
...@@ -1192,81 +1212,27 @@ static bool ath_is_rfkill_set(struct ath_softc *sc) ...@@ -1192,81 +1212,27 @@ static bool ath_is_rfkill_set(struct ath_softc *sc)
ah->rfkill_polarity; ah->rfkill_polarity;
} }
/* s/w rfkill handlers */ static void ath9k_rfkill_poll_state(struct ieee80211_hw *hw)
static int ath_rfkill_set_block(void *data, bool blocked)
{ {
struct ath_softc *sc = data; struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
if (blocked)
ath_radio_disable(sc);
else
ath_radio_enable(sc);
return 0;
}
static void ath_rfkill_poll_state(struct rfkill *rfkill, void *data)
{
struct ath_softc *sc = data;
bool blocked = !!ath_is_rfkill_set(sc); bool blocked = !!ath_is_rfkill_set(sc);
if (rfkill_set_hw_state(rfkill, blocked)) wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
if (blocked)
ath_radio_disable(sc); ath_radio_disable(sc);
else else
ath_radio_enable(sc); ath_radio_enable(sc);
} }
/* Init s/w rfkill */ static void ath_start_rfkill_poll(struct ath_softc *sc)
static int ath_init_sw_rfkill(struct ath_softc *sc)
{
sc->rf_kill.ops.set_block = ath_rfkill_set_block;
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
sc->rf_kill.ops.poll = ath_rfkill_poll_state;
snprintf(sc->rf_kill.rfkill_name, sizeof(sc->rf_kill.rfkill_name),
"ath9k-%s::rfkill", wiphy_name(sc->hw->wiphy));
sc->rf_kill.rfkill = rfkill_alloc(sc->rf_kill.rfkill_name,
wiphy_dev(sc->hw->wiphy),
RFKILL_TYPE_WLAN,
&sc->rf_kill.ops, sc);
if (!sc->rf_kill.rfkill) {
DPRINTF(sc, ATH_DBG_FATAL, "Failed to allocate rfkill\n");
return -ENOMEM;
}
return 0;
}
/* Deinitialize rfkill */
static void ath_deinit_rfkill(struct ath_softc *sc)
{
if (sc->sc_flags & SC_OP_RFKILL_REGISTERED) {
rfkill_unregister(sc->rf_kill.rfkill);
rfkill_destroy(sc->rf_kill.rfkill);
sc->sc_flags &= ~SC_OP_RFKILL_REGISTERED;
}
}
static int ath_start_rfkill_poll(struct ath_softc *sc)
{ {
if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) { struct ath_hw *ah = sc->sc_ah;
if (rfkill_register(sc->rf_kill.rfkill)) {
DPRINTF(sc, ATH_DBG_FATAL,
"Unable to register rfkill\n");
rfkill_destroy(sc->rf_kill.rfkill);
/* Deinitialize the device */
ath_cleanup(sc);
return -EIO;
} else {
sc->sc_flags |= SC_OP_RFKILL_REGISTERED;
}
}
return 0; if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
wiphy_rfkill_start_polling(sc->hw->wiphy);
} }
#endif /* CONFIG_RFKILL */
void ath_cleanup(struct ath_softc *sc) void ath_cleanup(struct ath_softc *sc)
{ {
...@@ -1286,9 +1252,6 @@ void ath_detach(struct ath_softc *sc) ...@@ -1286,9 +1252,6 @@ void ath_detach(struct ath_softc *sc)
DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n"); DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n");
#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
ath_deinit_rfkill(sc);
#endif
ath_deinit_leds(sc); ath_deinit_leds(sc);
cancel_work_sync(&sc->chan_work); cancel_work_sync(&sc->chan_work);
cancel_delayed_work_sync(&sc->wiphy_work); cancel_delayed_work_sync(&sc->wiphy_work);
...@@ -1626,13 +1589,6 @@ int ath_attach(u16 devid, struct ath_softc *sc) ...@@ -1626,13 +1589,6 @@ int ath_attach(u16 devid, struct ath_softc *sc)
if (error != 0) if (error != 0)
goto error_attach; goto error_attach;
#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
/* Initialize s/w rfkill */
error = ath_init_sw_rfkill(sc);
if (error)
goto error_attach;
#endif
INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work); INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work); INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
sc->wiphy_scheduler_int = msecs_to_jiffies(500); sc->wiphy_scheduler_int = msecs_to_jiffies(500);
...@@ -1648,6 +1604,7 @@ int ath_attach(u16 devid, struct ath_softc *sc) ...@@ -1648,6 +1604,7 @@ int ath_attach(u16 devid, struct ath_softc *sc)
/* Initialize LED control */ /* Initialize LED control */
ath_init_leds(sc); ath_init_leds(sc);
ath_start_rfkill_poll(sc);
return 0; return 0;
...@@ -1920,7 +1877,7 @@ static int ath9k_start(struct ieee80211_hw *hw) ...@@ -1920,7 +1877,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
struct ath_softc *sc = aphy->sc; struct ath_softc *sc = aphy->sc;
struct ieee80211_channel *curchan = hw->conf.channel; struct ieee80211_channel *curchan = hw->conf.channel;
struct ath9k_channel *init_channel; struct ath9k_channel *init_channel;
int r, pos; int r;
DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with " DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with "
"initial channel: %d MHz\n", curchan->center_freq); "initial channel: %d MHz\n", curchan->center_freq);
...@@ -1950,11 +1907,9 @@ static int ath9k_start(struct ieee80211_hw *hw) ...@@ -1950,11 +1907,9 @@ static int ath9k_start(struct ieee80211_hw *hw)
/* setup initial channel */ /* setup initial channel */
pos = curchan->hw_value; sc->chan_idx = curchan->hw_value;
sc->chan_idx = pos; init_channel = ath_get_curchannel(sc, hw);
init_channel = &sc->sc_ah->channels[pos];
ath9k_update_ichannel(sc, hw, init_channel);
/* Reset SERDES registers */ /* Reset SERDES registers */
ath9k_hw_configpcipowersave(sc->sc_ah, 0); ath9k_hw_configpcipowersave(sc->sc_ah, 0);
...@@ -2018,10 +1973,6 @@ static int ath9k_start(struct ieee80211_hw *hw) ...@@ -2018,10 +1973,6 @@ static int ath9k_start(struct ieee80211_hw *hw)
ieee80211_wake_queues(hw); ieee80211_wake_queues(hw);
#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
r = ath_start_rfkill_poll(sc);
#endif
mutex_unlock: mutex_unlock:
mutex_unlock(&sc->mutex); mutex_unlock(&sc->mutex);
...@@ -2159,7 +2110,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) ...@@ -2159,7 +2110,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
} else } else
sc->rx.rxlink = NULL; sc->rx.rxlink = NULL;
rfkill_pause_polling(sc->rf_kill.rfkill); wiphy_rfkill_stop_polling(sc->hw->wiphy);
/* disable HAL and put h/w to sleep */ /* disable HAL and put h/w to sleep */
ath9k_hw_disable(sc->sc_ah); ath9k_hw_disable(sc->sc_ah);
...@@ -2765,6 +2716,7 @@ struct ieee80211_ops ath9k_ops = { ...@@ -2765,6 +2716,7 @@ struct ieee80211_ops ath9k_ops = {
.ampdu_action = ath9k_ampdu_action, .ampdu_action = ath9k_ampdu_action,
.sw_scan_start = ath9k_sw_scan_start, .sw_scan_start = ath9k_sw_scan_start,
.sw_scan_complete = ath9k_sw_scan_complete, .sw_scan_complete = ath9k_sw_scan_complete,
.rfkill_poll = ath9k_rfkill_poll_state,
}; };
static struct { static struct {
......
...@@ -817,6 +817,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) ...@@ -817,6 +817,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
} }
if (unlikely(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON | if (unlikely(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
SC_OP_WAIT_FOR_CAB |
SC_OP_WAIT_FOR_PSPOLL_DATA))) SC_OP_WAIT_FOR_PSPOLL_DATA)))
ath_rx_ps(sc, skb); ath_rx_ps(sc, skb);
......
...@@ -2152,7 +2152,6 @@ static int iwl_mac_start(struct ieee80211_hw *hw) ...@@ -2152,7 +2152,6 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
/* we should be verifying the device is ready to be opened */ /* we should be verifying the device is ready to be opened */
mutex_lock(&priv->mutex); mutex_lock(&priv->mutex);
memset(&priv->staging_rxon, 0, sizeof(struct iwl_rxon_cmd));
/* fetch ucode file from disk, alloc and copy to bus-master buffers ... /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
* ucode filename and max sizes are card-specific. */ * ucode filename and max sizes are card-specific. */
......
...@@ -629,13 +629,9 @@ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv, ...@@ -629,13 +629,9 @@ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
if (!sta_ht_inf->ht_supported) if (!sta_ht_inf->ht_supported)
return 0; return 0;
} }
return iwl_is_channel_extension(priv, priv->band,
if (iwl_ht_conf->ht_protection & IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) le16_to_cpu(priv->staging_rxon.channel),
return 1; iwl_ht_conf->extension_chan_offset);
else
return iwl_is_channel_extension(priv, priv->band,
le16_to_cpu(priv->staging_rxon.channel),
iwl_ht_conf->extension_chan_offset);
} }
EXPORT_SYMBOL(iwl_is_fat_tx_allowed); EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
...@@ -826,9 +822,18 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info) ...@@ -826,9 +822,18 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
if (iwl_is_fat_tx_allowed(priv, NULL)) { if (iwl_is_fat_tx_allowed(priv, NULL)) {
/* pure 40 fat */ /* pure 40 fat */
if (rxon->flags & RXON_FLG_FAT_PROT_MSK) if (ht_info->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) {
rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40; rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40;
else { /* Note: control channel is opposite of extension channel */
switch (ht_info->extension_chan_offset) {
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
rxon->flags &= ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
break;
case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
break;
}
} else {
/* Note: control channel is opposite of extension channel */ /* Note: control channel is opposite of extension channel */
switch (ht_info->extension_chan_offset) { switch (ht_info->extension_chan_offset) {
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
...@@ -2390,39 +2395,46 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, ...@@ -2390,39 +2395,46 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
priv->ibss_beacon = ieee80211_beacon_get(hw, vif); priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
} }
if ((changes & BSS_CHANGED_BSSID) && !iwl_is_rfkill(priv)) { if (changes & BSS_CHANGED_BEACON_INT) {
/* If there is currently a HW scan going on in the background priv->beacon_int = bss_conf->beacon_int;
* then we need to cancel it else the RXON below will fail. */ /* TODO: in AP mode, do something to make this take effect */
}
if (changes & BSS_CHANGED_BSSID) {
IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid);
/*
* If there is currently a HW scan going on in the
* background then we need to cancel it else the RXON
* below/in post_associate will fail.
*/
if (iwl_scan_cancel_timeout(priv, 100)) { if (iwl_scan_cancel_timeout(priv, 100)) {
IWL_WARN(priv, "Aborted scan still in progress " IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
"after 100ms\n");
IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
mutex_unlock(&priv->mutex); mutex_unlock(&priv->mutex);
return; return;
} }
memcpy(priv->staging_rxon.bssid_addr,
bss_conf->bssid, ETH_ALEN); /* mac80211 only sets assoc when in STATION mode */
if (priv->iw_mode == NL80211_IFTYPE_ADHOC ||
/* TODO: Audit driver for usage of these members and see bss_conf->assoc) {
* if mac80211 deprecates them (priv->bssid looks like it memcpy(priv->staging_rxon.bssid_addr,
* shouldn't be there, but I haven't scanned the IBSS code bss_conf->bssid, ETH_ALEN);
* to verify) - jpk */
memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); /* currently needed in a few places */
memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
if (priv->iw_mode == NL80211_IFTYPE_AP) } else {
iwlcore_config_ap(priv); priv->staging_rxon.filter_flags &=
else { ~RXON_FILTER_ASSOC_MSK;
int rc = iwlcore_commit_rxon(priv);
if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc)
iwl_rxon_add_station(
priv, priv->active_rxon.bssid_addr, 1);
} }
} else if (!iwl_is_rfkill(priv)) {
iwl_scan_cancel_timeout(priv, 100);
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
iwlcore_commit_rxon(priv);
} }
/*
* This needs to be after setting the BSSID in case
* mac80211 decides to do both changes at once because
* it will invoke post_associate.
*/
if (priv->iw_mode == NL80211_IFTYPE_ADHOC && if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
changes & BSS_CHANGED_BEACON) { changes & BSS_CHANGED_BEACON) {
struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
...@@ -2431,8 +2443,6 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, ...@@ -2431,8 +2443,6 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
iwl_mac_beacon_update(hw, beacon); iwl_mac_beacon_update(hw, beacon);
} }
mutex_unlock(&priv->mutex);
if (changes & BSS_CHANGED_ERP_PREAMBLE) { if (changes & BSS_CHANGED_ERP_PREAMBLE) {
IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n", IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
bss_conf->use_short_preamble); bss_conf->use_short_preamble);
...@@ -2450,6 +2460,23 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, ...@@ -2450,6 +2460,23 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK; priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
} }
if (changes & BSS_CHANGED_BASIC_RATES) {
/* XXX use this information
*
* To do that, remove code from iwl_set_rate() and put something
* like this here:
*
if (A-band)
priv->staging_rxon.ofdm_basic_rates =
bss_conf->basic_rates;
else
priv->staging_rxon.ofdm_basic_rates =
bss_conf->basic_rates >> 4;
priv->staging_rxon.cck_basic_rates =
bss_conf->basic_rates & 0xF;
*/
}
if (changes & BSS_CHANGED_HT) { if (changes & BSS_CHANGED_HT) {
iwl_ht_conf(priv, bss_conf); iwl_ht_conf(priv, bss_conf);
...@@ -2459,10 +2486,6 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, ...@@ -2459,10 +2486,6 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
if (changes & BSS_CHANGED_ASSOC) { if (changes & BSS_CHANGED_ASSOC) {
IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc); IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
/* This should never happen as this function should
* never be called from interrupt context. */
if (WARN_ON_ONCE(in_interrupt()))
return;
if (bss_conf->assoc) { if (bss_conf->assoc) {
priv->assoc_id = bss_conf->aid; priv->assoc_id = bss_conf->aid;
priv->beacon_int = bss_conf->beacon_int; priv->beacon_int = bss_conf->beacon_int;
...@@ -2470,27 +2493,35 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, ...@@ -2470,27 +2493,35 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
priv->timestamp = bss_conf->timestamp; priv->timestamp = bss_conf->timestamp;
priv->assoc_capability = bss_conf->assoc_capability; priv->assoc_capability = bss_conf->assoc_capability;
/* we have just associated, don't start scan too early /*
* leave time for EAPOL exchange to complete * We have just associated, don't start scan too early
* leave time for EAPOL exchange to complete.
*
* XXX: do this in mac80211
*/ */
priv->next_scan_jiffies = jiffies + priv->next_scan_jiffies = jiffies +
IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
mutex_lock(&priv->mutex); if (!iwl_is_rfkill(priv))
priv->cfg->ops->lib->post_associate(priv); priv->cfg->ops->lib->post_associate(priv);
mutex_unlock(&priv->mutex); } else
} else {
priv->assoc_id = 0; priv->assoc_id = 0;
IWL_DEBUG_MAC80211(priv, "DISASSOC %d\n", bss_conf->assoc);
}
if (changes && iwl_is_associated(priv) && priv->assoc_id) {
IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n",
changes);
ret = iwl_send_rxon_assoc(priv);
if (!ret) {
/* Sync active_rxon with latest change. */
memcpy((void *)&priv->active_rxon,
&priv->staging_rxon,
sizeof(struct iwl_rxon_cmd));
} }
} else if (changes && iwl_is_associated(priv) && priv->assoc_id) {
IWL_DEBUG_MAC80211(priv, "Associated Changes %d\n", changes);
ret = iwl_send_rxon_assoc(priv);
if (!ret)
/* Sync active_rxon with latest change. */
memcpy((void *)&priv->active_rxon,
&priv->staging_rxon,
sizeof(struct iwl_rxon_cmd));
} }
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n"); IWL_DEBUG_MAC80211(priv, "leave\n");
} }
EXPORT_SYMBOL(iwl_bss_info_changed); EXPORT_SYMBOL(iwl_bss_info_changed);
......
...@@ -2498,8 +2498,7 @@ static void iwl3945_alive_start(struct iwl_priv *priv) ...@@ -2498,8 +2498,7 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
struct iwl3945_rxon_cmd *active_rxon = struct iwl3945_rxon_cmd *active_rxon =
(struct iwl3945_rxon_cmd *)(&priv->active_rxon); (struct iwl3945_rxon_cmd *)(&priv->active_rxon);
memcpy(&priv->staging_rxon, &priv->active_rxon, priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
sizeof(priv->staging_rxon));
active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
} else { } else {
/* Initialize our rx_config data */ /* Initialize our rx_config data */
...@@ -3147,7 +3146,6 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw) ...@@ -3147,7 +3146,6 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw)
/* we should be verifying the device is ready to be opened */ /* we should be verifying the device is ready to be opened */
mutex_lock(&priv->mutex); mutex_lock(&priv->mutex);
memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon));
/* fetch ucode file from disk, alloc and copy to bus-master buffers ... /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
* ucode filename and max sizes are card-specific. */ * ucode filename and max sizes are card-specific. */
......
...@@ -812,7 +812,6 @@ static void if_spi_h2c(struct if_spi_card *card, ...@@ -812,7 +812,6 @@ static void if_spi_h2c(struct if_spi_card *card,
static void if_spi_e2h(struct if_spi_card *card) static void if_spi_e2h(struct if_spi_card *card)
{ {
int err = 0; int err = 0;
unsigned long flags;
u32 cause; u32 cause;
struct lbs_private *priv = card->priv; struct lbs_private *priv = card->priv;
...@@ -827,10 +826,7 @@ static void if_spi_e2h(struct if_spi_card *card) ...@@ -827,10 +826,7 @@ static void if_spi_e2h(struct if_spi_card *card)
/* generate a card interrupt */ /* generate a card interrupt */
spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG, IF_SPI_CIC_HOST_EVENT); spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG, IF_SPI_CIC_HOST_EVENT);
spin_lock_irqsave(&priv->driver_lock, flags);
lbs_queue_event(priv, cause & 0xff); lbs_queue_event(priv, cause & 0xff);
spin_unlock_irqrestore(&priv->driver_lock, flags);
out: out:
if (err) if (err)
lbs_pr_err("%s: error %d\n", __func__, err); lbs_pr_err("%s: error %d\n", __func__, err);
...@@ -875,7 +871,12 @@ static int lbs_spi_thread(void *data) ...@@ -875,7 +871,12 @@ static int lbs_spi_thread(void *data)
err = if_spi_c2h_data(card); err = if_spi_c2h_data(card);
if (err) if (err)
goto err; goto err;
if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY) {
/* workaround: in PS mode, the card does not set the Command
* Download Ready bit, but it sets TX Download Ready. */
if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY ||
(card->priv->psstate != PS_STATE_FULL_POWER &&
(hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) {
/* This means two things. First of all, /* This means two things. First of all,
* if there was a previous command sent, the card has * if there was a previous command sent, the card has
* successfully received it. * successfully received it.
......
...@@ -177,7 +177,7 @@ dell_send_request(struct calling_interface_buffer *buffer, int class, ...@@ -177,7 +177,7 @@ dell_send_request(struct calling_interface_buffer *buffer, int class,
static int dell_rfkill_set(void *data, bool blocked) static int dell_rfkill_set(void *data, bool blocked)
{ {
struct calling_interface_buffer buffer; struct calling_interface_buffer buffer;
int disable = blocked ? 0 : 1; int disable = blocked ? 1 : 0;
unsigned long radio = (unsigned long)data; unsigned long radio = (unsigned long)data;
memset(&buffer, 0, sizeof(struct calling_interface_buffer)); memset(&buffer, 0, sizeof(struct calling_interface_buffer));
......
...@@ -1133,8 +1133,9 @@ static void sony_nc_rfkill_update() ...@@ -1133,8 +1133,9 @@ static void sony_nc_rfkill_update()
continue; continue;
if (hwblock) { if (hwblock) {
if (rfkill_set_hw_state(sony_rfkill_devices[i], true)) if (rfkill_set_hw_state(sony_rfkill_devices[i], true)) {
sony_nc_rfkill_set((void *)i, true); /* we already know we're blocked */
}
continue; continue;
} }
......
...@@ -163,6 +163,29 @@ static const struct file_operations noack_ops = { ...@@ -163,6 +163,29 @@ static const struct file_operations noack_ops = {
.open = mac80211_open_file_generic .open = mac80211_open_file_generic
}; };
static ssize_t queues_read(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
unsigned long flags;
char buf[IEEE80211_MAX_QUEUES * 20];
int q, res = 0;
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
for (q = 0; q < local->hw.queues; q++)
res += sprintf(buf + res, "%02d: %#.8lx/%d\n", q,
local->queue_stop_reasons[q],
__netif_subqueue_stopped(local->mdev, q));
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
return simple_read_from_buffer(user_buf, count, ppos, buf, res);
}
static const struct file_operations queues_ops = {
.read = queues_read,
.open = mac80211_open_file_generic
};
/* statistics stuff */ /* statistics stuff */
#define DEBUGFS_STATS_FILE(name, buflen, fmt, value...) \ #define DEBUGFS_STATS_FILE(name, buflen, fmt, value...) \
...@@ -298,6 +321,7 @@ void debugfs_hw_add(struct ieee80211_local *local) ...@@ -298,6 +321,7 @@ void debugfs_hw_add(struct ieee80211_local *local)
DEBUGFS_ADD(total_ps_buffered); DEBUGFS_ADD(total_ps_buffered);
DEBUGFS_ADD(wep_iv); DEBUGFS_ADD(wep_iv);
DEBUGFS_ADD(tsf); DEBUGFS_ADD(tsf);
DEBUGFS_ADD(queues);
DEBUGFS_ADD_MODE(reset, 0200); DEBUGFS_ADD_MODE(reset, 0200);
DEBUGFS_ADD(noack); DEBUGFS_ADD(noack);
...@@ -350,6 +374,7 @@ void debugfs_hw_del(struct ieee80211_local *local) ...@@ -350,6 +374,7 @@ void debugfs_hw_del(struct ieee80211_local *local)
DEBUGFS_DEL(total_ps_buffered); DEBUGFS_DEL(total_ps_buffered);
DEBUGFS_DEL(wep_iv); DEBUGFS_DEL(wep_iv);
DEBUGFS_DEL(tsf); DEBUGFS_DEL(tsf);
DEBUGFS_DEL(queues);
DEBUGFS_DEL(reset); DEBUGFS_DEL(reset);
DEBUGFS_DEL(noack); DEBUGFS_DEL(noack);
......
...@@ -783,6 +783,7 @@ struct ieee80211_local { ...@@ -783,6 +783,7 @@ struct ieee80211_local {
struct dentry *total_ps_buffered; struct dentry *total_ps_buffered;
struct dentry *wep_iv; struct dentry *wep_iv;
struct dentry *tsf; struct dentry *tsf;
struct dentry *queues;
struct dentry *reset; struct dentry *reset;
struct dentry *noack; struct dentry *noack;
struct dentry *statistics; struct dentry *statistics;
...@@ -1100,7 +1101,6 @@ void ieee802_11_parse_elems(u8 *start, size_t len, ...@@ -1100,7 +1101,6 @@ void ieee802_11_parse_elems(u8 *start, size_t len,
u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
struct ieee802_11_elems *elems, struct ieee802_11_elems *elems,
u64 filter, u32 crc); u64 filter, u32 crc);
int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freq);
u32 ieee80211_mandatory_rates(struct ieee80211_local *local, u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
enum ieee80211_band band); enum ieee80211_band band);
......
...@@ -1102,14 +1102,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, ...@@ -1102,14 +1102,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta; struct sta_info *sta;
u32 changed = 0, config_changed = 0; u32 changed = 0, config_changed = 0;
rcu_read_lock();
sta = sta_info_get(local, ifmgd->bssid);
if (!sta) {
rcu_read_unlock();
return;
}
if (deauth) { if (deauth) {
ifmgd->direct_probe_tries = 0; ifmgd->direct_probe_tries = 0;
ifmgd->auth_tries = 0; ifmgd->auth_tries = 0;
...@@ -1120,7 +1112,11 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, ...@@ -1120,7 +1112,11 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
netif_tx_stop_all_queues(sdata->dev); netif_tx_stop_all_queues(sdata->dev);
netif_carrier_off(sdata->dev); netif_carrier_off(sdata->dev);
ieee80211_sta_tear_down_BA_sessions(sta); rcu_read_lock();
sta = sta_info_get(local, ifmgd->bssid);
if (sta)
ieee80211_sta_tear_down_BA_sessions(sta);
rcu_read_unlock();
bss = ieee80211_rx_bss_get(local, ifmgd->bssid, bss = ieee80211_rx_bss_get(local, ifmgd->bssid,
conf->channel->center_freq, conf->channel->center_freq,
...@@ -1156,8 +1152,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, ...@@ -1156,8 +1152,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
ifmgd->ssid, ifmgd->ssid_len); ifmgd->ssid, ifmgd->ssid_len);
} }
rcu_read_unlock();
ieee80211_set_wmm_default(sdata); ieee80211_set_wmm_default(sdata);
ieee80211_recalc_idle(local); ieee80211_recalc_idle(local);
...@@ -2223,7 +2217,10 @@ static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata) ...@@ -2223,7 +2217,10 @@ static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata)
capa_mask, capa_val); capa_mask, capa_val);
if (bss) { if (bss) {
ieee80211_set_freq(sdata, bss->cbss.channel->center_freq); local->oper_channel = bss->cbss.channel;
local->oper_channel_type = NL80211_CHAN_NO_HT;
ieee80211_hw_config(local, 0);
if (!(ifmgd->flags & IEEE80211_STA_SSID_SET)) if (!(ifmgd->flags & IEEE80211_STA_SSID_SET))
ieee80211_sta_set_ssid(sdata, bss->ssid, ieee80211_sta_set_ssid(sdata, bss->ssid,
bss->ssid_len); bss->ssid_len);
...@@ -2445,6 +2442,14 @@ void ieee80211_sta_req_auth(struct ieee80211_sub_if_data *sdata) ...@@ -2445,6 +2442,14 @@ void ieee80211_sta_req_auth(struct ieee80211_sub_if_data *sdata)
ieee80211_set_disassoc(sdata, true, true, ieee80211_set_disassoc(sdata, true, true,
WLAN_REASON_DEAUTH_LEAVING); WLAN_REASON_DEAUTH_LEAVING);
if (ifmgd->ssid_len == 0) {
/*
* Only allow association to be started if a valid SSID
* is configured.
*/
return;
}
if (!(ifmgd->flags & IEEE80211_STA_EXT_SME) || if (!(ifmgd->flags & IEEE80211_STA_EXT_SME) ||
ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE) ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE)
set_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request); set_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request);
...@@ -2476,6 +2481,10 @@ int ieee80211_sta_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size ...@@ -2476,6 +2481,10 @@ int ieee80211_sta_set_ssid(struct ieee80211_sub_if_data *sdata, char *ssid, size
ifmgd = &sdata->u.mgd; ifmgd = &sdata->u.mgd;
if (ifmgd->ssid_len != len || memcmp(ifmgd->ssid, ssid, len) != 0) { if (ifmgd->ssid_len != len || memcmp(ifmgd->ssid, ssid, len) != 0) {
if (ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED)
ieee80211_set_disassoc(sdata, true, true,
WLAN_REASON_DEAUTH_LEAVING);
/* /*
* Do not use reassociation if SSID is changed (different ESS). * Do not use reassociation if SSID is changed (different ESS).
*/ */
...@@ -2500,6 +2509,11 @@ int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid) ...@@ -2500,6 +2509,11 @@ int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid)
{ {
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
if (compare_ether_addr(bssid, ifmgd->bssid) != 0 &&
ifmgd->state == IEEE80211_STA_MLME_ASSOCIATED)
ieee80211_set_disassoc(sdata, true, true,
WLAN_REASON_DEAUTH_LEAVING);
if (is_valid_ether_addr(bssid)) { if (is_valid_ether_addr(bssid)) {
memcpy(ifmgd->bssid, bssid, ETH_ALEN); memcpy(ifmgd->bssid, bssid, ETH_ALEN);
ifmgd->flags |= IEEE80211_STA_BSSID_SET; ifmgd->flags |= IEEE80211_STA_BSSID_SET;
......
...@@ -774,31 +774,6 @@ void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, ...@@ -774,31 +774,6 @@ void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
dev_queue_xmit(skb); dev_queue_xmit(skb);
} }
int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz)
{
int ret = -EINVAL;
struct ieee80211_channel *chan;
struct ieee80211_local *local = sdata->local;
chan = ieee80211_get_channel(local->hw.wiphy, freqMHz);
if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
chan->flags & IEEE80211_CHAN_NO_IBSS)
return ret;
local->oper_channel = chan;
local->oper_channel_type = NL80211_CHAN_NO_HT;
if (local->sw_scanning || local->hw_scanning)
ret = 0;
else
ret = ieee80211_hw_config(
local, IEEE80211_CONF_CHANGE_CHANNEL);
}
return ret;
}
u32 ieee80211_mandatory_rates(struct ieee80211_local *local, u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
enum ieee80211_band band) enum ieee80211_band band)
{ {
......
...@@ -55,6 +55,8 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev, ...@@ -55,6 +55,8 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev,
struct iw_freq *freq, char *extra) struct iw_freq *freq, char *extra)
{ {
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct ieee80211_channel *chan;
if (sdata->vif.type == NL80211_IFTYPE_ADHOC) if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
return cfg80211_ibss_wext_siwfreq(dev, info, freq, extra); return cfg80211_ibss_wext_siwfreq(dev, info, freq, extra);
...@@ -69,17 +71,38 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev, ...@@ -69,17 +71,38 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev,
IEEE80211_STA_AUTO_CHANNEL_SEL; IEEE80211_STA_AUTO_CHANNEL_SEL;
return 0; return 0;
} else } else
return ieee80211_set_freq(sdata, chan = ieee80211_get_channel(local->hw.wiphy,
ieee80211_channel_to_frequency(freq->m)); ieee80211_channel_to_frequency(freq->m));
} else { } else {
int i, div = 1000000; int i, div = 1000000;
for (i = 0; i < freq->e; i++) for (i = 0; i < freq->e; i++)
div /= 10; div /= 10;
if (div > 0) if (div <= 0)
return ieee80211_set_freq(sdata, freq->m / div);
else
return -EINVAL; return -EINVAL;
chan = ieee80211_get_channel(local->hw.wiphy, freq->m / div);
} }
if (!chan)
return -EINVAL;
if (chan->flags & IEEE80211_CHAN_DISABLED)
return -EINVAL;
/*
* no change except maybe auto -> fixed, ignore the HT
* setting so you can fix a channel you're on already
*/
if (local->oper_channel == chan)
return 0;
if (sdata->vif.type == NL80211_IFTYPE_STATION)
ieee80211_sta_req_auth(sdata);
local->oper_channel = chan;
local->oper_channel_type = NL80211_CHAN_NO_HT;
ieee80211_hw_config(local, 0);
return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment