Commit a196e96b authored by Edwin Peer's avatar Edwin Peer Committed by David S. Miller

bnxt_en: clean up VLAN feature bit handling

The hardware VLAN offload feature on our NIC does not have separate
knobs for handling customer and service tags on RX. Either offloading
of both must be enabled or both must be disabled. Introduce definitions
for the combined feature set in order to clean up the code and make
this constraint more clear. Technically these features can be separately
enabled on TX, however, since the default is to turn both on, the
combined TX feature set is also introduced for code consistency.
Signed-off-by: default avatarEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent bd3191b5
......@@ -1614,7 +1614,7 @@ static inline struct sk_buff *bnxt_tpa_end(struct bnxt *bp,
skb_set_hash(skb, tpa_info->rss_hash, tpa_info->hash_type);
if ((tpa_info->flags2 & RX_CMP_FLAGS2_META_FORMAT_VLAN) &&
(skb->dev->features & NETIF_F_HW_VLAN_CTAG_RX)) {
(skb->dev->features & BNXT_HW_FEATURE_VLAN_ALL_RX)) {
u16 vlan_proto = tpa_info->metadata >>
RX_CMP_FLAGS2_METADATA_TPID_SFT;
u16 vtag = tpa_info->metadata & RX_CMP_FLAGS2_METADATA_TCI_MASK;
......@@ -1832,7 +1832,7 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
if ((rxcmp1->rx_cmp_flags2 &
cpu_to_le32(RX_CMP_FLAGS2_META_FORMAT_VLAN)) &&
(skb->dev->features & NETIF_F_HW_VLAN_CTAG_RX)) {
(skb->dev->features & BNXT_HW_FEATURE_VLAN_ALL_RX)) {
u32 meta_data = le32_to_cpu(rxcmp1->rx_cmp_meta_data);
u16 vtag = meta_data & RX_CMP_FLAGS2_METADATA_TCI_MASK;
u16 vlan_proto = meta_data >> RX_CMP_FLAGS2_METADATA_TPID_SFT;
......@@ -9932,24 +9932,16 @@ static netdev_features_t bnxt_fix_features(struct net_device *dev,
/* Both CTAG and STAG VLAN accelaration on the RX side have to be
* turned on or off together.
*/
vlan_features = features & (NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_STAG_RX);
if (vlan_features != (NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_STAG_RX)) {
if (dev->features & NETIF_F_HW_VLAN_CTAG_RX)
features &= ~(NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_STAG_RX);
vlan_features = features & BNXT_HW_FEATURE_VLAN_ALL_RX;
if (vlan_features != BNXT_HW_FEATURE_VLAN_ALL_RX) {
if (dev->features & BNXT_HW_FEATURE_VLAN_ALL_RX)
features &= ~BNXT_HW_FEATURE_VLAN_ALL_RX;
else if (vlan_features)
features |= NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_STAG_RX;
features |= BNXT_HW_FEATURE_VLAN_ALL_RX;
}
#ifdef CONFIG_BNXT_SRIOV
if (BNXT_VF(bp)) {
if (bp->vf.vlan) {
features &= ~(NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_STAG_RX);
}
}
if (BNXT_VF(bp) && bp->vf.vlan)
features &= ~BNXT_HW_FEATURE_VLAN_ALL_RX;
#endif
return features;
}
......@@ -9972,7 +9964,7 @@ static int bnxt_set_features(struct net_device *dev, netdev_features_t features)
if (bp->flags & BNXT_FLAG_NO_AGG_RINGS)
flags &= ~BNXT_FLAG_TPA;
if (features & NETIF_F_HW_VLAN_CTAG_RX)
if (features & BNXT_HW_FEATURE_VLAN_ALL_RX)
flags |= BNXT_FLAG_STRIP_VLAN;
if (features & NETIF_F_NTUPLE)
......@@ -12060,8 +12052,8 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
dev->gso_partial_features = NETIF_F_GSO_UDP_TUNNEL_CSUM |
NETIF_F_GSO_GRE_CSUM;
dev->vlan_features = dev->hw_features | NETIF_F_HIGHDMA;
dev->hw_features |= NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_HW_VLAN_STAG_RX | NETIF_F_HW_VLAN_STAG_TX;
dev->hw_features |= BNXT_HW_FEATURE_VLAN_ALL_RX |
BNXT_HW_FEATURE_VLAN_ALL_TX;
if (BNXT_SUPPORTS_TPA(bp))
dev->hw_features |= NETIF_F_GRO_HW;
dev->features |= dev->hw_features | NETIF_F_HIGHDMA;
......@@ -12117,7 +12109,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
bnxt_fw_init_one_p3(bp);
if (dev->hw_features & NETIF_F_HW_VLAN_CTAG_RX)
if (dev->hw_features & BNXT_HW_FEATURE_VLAN_ALL_RX)
bp->flags |= BNXT_FLAG_STRIP_VLAN;
rc = bnxt_init_int_mode(bp);
......
......@@ -1906,6 +1906,11 @@ struct bnxt {
#define BNXT_PCIE_STATS_OFFSET(counter) \
(offsetof(struct pcie_ctx_hw_stats, counter) / 8)
#define BNXT_HW_FEATURE_VLAN_ALL_RX \
(NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX)
#define BNXT_HW_FEATURE_VLAN_ALL_TX \
(NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX)
#define I2C_DEV_ADDR_A0 0xa0
#define I2C_DEV_ADDR_A2 0xa2
#define SFF_DIAG_SUPPORT_OFFSET 0x5c
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment