Commit a1c0ed24 authored by Tristram Ha's avatar Tristram Ha Committed by David S. Miller

dt-bindings: net: dsa: document additional Microchip KSZ9477 family switches

Document additional Microchip KSZ9477 family switches.

Show how KSZ8565 switch should be configured as the host port is port 7
instead of port 5.
Signed-off-by: default avatarTristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d5fa9c55
...@@ -7,6 +7,11 @@ Required properties: ...@@ -7,6 +7,11 @@ Required properties:
of the following: of the following:
- "microchip,ksz9477" - "microchip,ksz9477"
- "microchip,ksz9897" - "microchip,ksz9897"
- "microchip,ksz9896"
- "microchip,ksz9567"
- "microchip,ksz8565"
- "microchip,ksz9893"
- "microchip,ksz9563"
Optional properties: Optional properties:
...@@ -73,4 +78,42 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0: ...@@ -73,4 +78,42 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0:
}; };
}; };
}; };
ksz8565: ksz8565@0 {
compatible = "microchip,ksz8565";
reg = <0>;
spi-max-frequency = <44000000>;
spi-cpha;
spi-cpol;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&eth0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment