Commit a1d79aaa authored by Michael Buesch's avatar Michael Buesch Committed by Jeff Garzik

[PATCH] bcm43xx: workaround init_board vs. IRQ race

Place the Init-vs-IRQ workaround before any card register
access, because we might not have the wireless core mapped
at all times in init. So this will result in a Machine Check
caused by a bus error.
Signed-off-by: default avatarMichael Buesch <mb@bu3sch.de>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent e8d59697
......@@ -1885,6 +1885,15 @@ static irqreturn_t bcm43xx_interrupt_handler(int irq, void *dev_id, struct pt_re
spin_lock(&bcm->irq_lock);
/* Only accept IRQs, if we are initialized properly.
* This avoids an RX race while initializing.
* We should probably not enable IRQs before we are initialized
* completely, but some careful work is needed to fix this. I think it
* is best to stay with this cheap workaround for now... .
*/
if (unlikely(bcm43xx_status(bcm) != BCM43xx_STAT_INITIALIZED))
goto out;
reason = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON);
if (reason == 0xffffffff) {
/* irq not for us (shared irq) */
......@@ -1906,19 +1915,11 @@ static irqreturn_t bcm43xx_interrupt_handler(int irq, void *dev_id, struct pt_re
bcm43xx_interrupt_ack(bcm, reason);
/* Only accept IRQs, if we are initialized properly.
* This avoids an RX race while initializing.
* We should probably not enable IRQs before we are initialized
* completely, but some careful work is needed to fix this. I think it
* is best to stay with this cheap workaround for now... .
*/
if (likely(bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED)) {
/* disable all IRQs. They are enabled again in the bottom half. */
bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
/* save the reason code and call our bottom half. */
bcm->irq_reason = reason;
tasklet_schedule(&bcm->isr_tasklet);
}
/* disable all IRQs. They are enabled again in the bottom half. */
bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL);
/* save the reason code and call our bottom half. */
bcm->irq_reason = reason;
tasklet_schedule(&bcm->isr_tasklet);
out:
mmiowb();
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment