Commit a2c614a7 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'tegra-for-4.15-arm64-dt' of...

Merge tag 'tegra-for-4.15-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

Pull "arm64: tegra: Device tree changes for v4.15-rc1" from Thierry Reding:

Enables host1x, VIC, PCIe and the BPMP thermal sensor on Tegra186.

* tag 'tegra-for-4.15-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Add BPMP thermal sensor to Tegra186
  arm64: tegra: Enable PCIe on Jetson TX2
  arm64: tegra: Add PCIe node for Tegra186
  arm64: tegra: Add VIC on Tegra186
  arm64: tegra: Add host1x on Tegra186
  arm64: tegra: Add #power-domain-cells for BPMP
parents 918c8223 15274c23
...@@ -49,6 +49,30 @@ sdhci@3400000 { ...@@ -49,6 +49,30 @@ sdhci@3400000 {
vmmc-supply = <&vdd_sd>; vmmc-supply = <&vdd_sd>;
}; };
pcie@10003000 {
status = "okay";
dvdd-pex-supply = <&vdd_pex>;
hvdd-pex-pll-supply = <&vdd_1v8>;
hvdd-pex-supply = <&vdd_1v8>;
vddio-pexctl-aud-supply = <&vdd_1v8>;
pci@1,0 {
nvidia,num-lanes = <4>;
status = "okay";
};
pci@2,0 {
nvidia,num-lanes = <0>;
status = "disabled";
};
pci@3,0 {
nvidia,num-lanes = <1>;
status = "disabled";
};
};
gpio-keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
......
...@@ -4,6 +4,7 @@ ...@@ -4,6 +4,7 @@
#include <dt-bindings/mailbox/tegra186-hsp.h> #include <dt-bindings/mailbox/tegra186-hsp.h>
#include <dt-bindings/power/tegra186-powergate.h> #include <dt-bindings/power/tegra186-powergate.h>
#include <dt-bindings/reset/tegra186-reset.h> #include <dt-bindings/reset/tegra186-reset.h>
#include <dt-bindings/thermal/tegra186-bpmp-thermal.h>
/ { / {
compatible = "nvidia,tegra186"; compatible = "nvidia,tegra186";
...@@ -355,6 +356,116 @@ ccplex@e000000 { ...@@ -355,6 +356,116 @@ ccplex@e000000 {
nvidia,bpmp = <&bpmp>; nvidia,bpmp = <&bpmp>;
}; };
pcie@10003000 {
compatible = "nvidia,tegra186-pcie";
power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
device_type = "pci";
reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */
0x0 0x10003800 0x0 0x00000800 /* AFI registers */
0x0 0x40000000 0x0 0x10000000>; /* configuration space */
reg-names = "pads", "afi", "cs";
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
interrupt-names = "intr", "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */
0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */
0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */
0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */
0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */
0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
clocks = <&bpmp TEGRA186_CLK_AFI>,
<&bpmp TEGRA186_CLK_PCIE>,
<&bpmp TEGRA186_CLK_PLLE>;
clock-names = "afi", "pex", "pll_e";
resets = <&bpmp TEGRA186_RESET_AFI>,
<&bpmp TEGRA186_RESET_PCIE>,
<&bpmp TEGRA186_RESET_PCIEXCLK>;
reset-names = "afi", "pex", "pcie_x";
status = "disabled";
pci@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>;
reg = <0x000800 0 0 0 0>;
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
ranges;
nvidia,num-lanes = <2>;
};
pci@2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>;
reg = <0x001000 0 0 0 0>;
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
ranges;
nvidia,num-lanes = <1>;
};
pci@3,0 {
device_type = "pci";
assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>;
reg = <0x001800 0 0 0 0>;
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
ranges;
nvidia,num-lanes = <1>;
};
};
host1x@13e00000 {
compatible = "nvidia,tegra186-host1x", "simple-bus";
reg = <0x0 0x13e00000 0x0 0x10000>,
<0x0 0x13e10000 0x0 0x10000>;
reg-names = "hypervisor", "vm";
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_HOST1X>;
clock-names = "host1x";
resets = <&bpmp TEGRA186_RESET_HOST1X>;
reset-names = "host1x";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x15000000 0x0 0x15000000 0x01000000>;
vic@15340000 {
compatible = "nvidia,tegra186-vic";
reg = <0x15340000 0x40000>;
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_VIC>;
clock-names = "vic";
resets = <&bpmp TEGRA186_RESET_VIC>;
reset-names = "vic";
power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>;
};
};
gpu@17000000 { gpu@17000000 {
compatible = "nvidia,gp10b"; compatible = "nvidia,gp10b";
reg = <0x0 0x17000000 0x0 0x1000000>, reg = <0x0 0x17000000 0x0 0x1000000>,
...@@ -443,6 +554,7 @@ bpmp: bpmp { ...@@ -443,6 +554,7 @@ bpmp: bpmp {
shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
#clock-cells = <1>; #clock-cells = <1>;
#reset-cells = <1>; #reset-cells = <1>;
#power-domain-cells = <1>;
bpmp_i2c: i2c { bpmp_i2c: i2c {
compatible = "nvidia,tegra186-bpmp-i2c"; compatible = "nvidia,tegra186-bpmp-i2c";
...@@ -451,6 +563,108 @@ bpmp_i2c: i2c { ...@@ -451,6 +563,108 @@ bpmp_i2c: i2c {
#size-cells = <0>; #size-cells = <0>;
status = "disabled"; status = "disabled";
}; };
bpmp_thermal: thermal {
compatible = "nvidia,tegra186-bpmp-thermal";
#thermal-sensor-cells = <1>;
};
};
thermal-zones {
a57 {
polling-delay = <0>;
polling-delay-passive = <1000>;
thermal-sensors =
<&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_CPU>;
trips {
critical {
temperature = <101000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
};
};
denver {
polling-delay = <0>;
polling-delay-passive = <1000>;
thermal-sensors =
<&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AUX>;
trips {
critical {
temperature = <101000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
};
};
gpu {
polling-delay = <0>;
polling-delay-passive = <1000>;
thermal-sensors =
<&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_GPU>;
trips {
critical {
temperature = <101000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
};
};
pll {
polling-delay = <0>;
polling-delay-passive = <1000>;
thermal-sensors =
<&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_PLLX>;
trips {
critical {
temperature = <101000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
};
};
always_on {
polling-delay = <0>;
polling-delay-passive = <1000>;
thermal-sensors =
<&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AO>;
trips {
critical {
temperature = <101000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
};
};
}; };
timer { timer {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment