docs: EDID/HOWTO.txt: convert it and rename to howto.rst

Sphinx need to know when a paragraph ends. So, do some adjustments
at the file for it to be properly parsed.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

that's said, I believe that this file should be moved to the
GPU/DRM documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Documentation/EDID/HOWTO.txt → Documentation/EDID/howto.rst

+:orphan:
+
+====
+EDID
+====
+
 In the good old days when graphics parameters were configured explicitly
 in a file called xorg.conf, even broken hardware could be managed.
 
@@ -34,16 +40,19 @@ Makefile. Please note that the EDID data structure expects the timing
 values in a different way as compared to the standard X11 format.
 
 X11:
-HTimings:  hdisp hsyncstart hsyncend htotal
-VTimings:  vdisp vsyncstart vsyncend vtotal
-
-EDID:
-#define XPIX hdisp
-#define XBLANK htotal-hdisp
-#define XOFFSET hsyncstart-hdisp
-#define XPULSE hsyncend-hsyncstart
-
-#define YPIX vdisp
-#define YBLANK vtotal-vdisp
-#define YOFFSET vsyncstart-vdisp
-#define YPULSE vsyncend-vsyncstart
+  HTimings:
+    hdisp hsyncstart hsyncend htotal
+  VTimings:
+    vdisp vsyncstart vsyncend vtotal
+
+EDID::
+
+  #define XPIX hdisp
+  #define XBLANK htotal-hdisp
+  #define XOFFSET hsyncstart-hdisp
+  #define XPULSE hsyncend-hsyncstart
+
+  #define YPIX vdisp
+  #define YBLANK vtotal-vdisp
+  #define YOFFSET vsyncstart-vdisp
+  #define YPULSE vsyncend-vsyncstart

Documentation/admin-guide/kernel-parameters.txt

@@ -932,7 +932,7 @@
 			edid/1680x1050.bin, or edid/1920x1080.bin is given
 			and no file with the same name exists. Details and
 			instructions how to build your own EDID data are
-			available in Documentation/EDID/HOWTO.txt. An EDID
+			available in Documentation/EDID/howto.rst. An EDID
 			data set will only be used for a particular connector,
 			if its name and a colon are prepended to the EDID
 			name. Each connector may use a unique EDID data

drivers/gpu/drm/Kconfig

@@ -141,7 +141,7 @@ config DRM_LOAD_EDID_FIRMWARE
 	  monitor are unable to provide appropriate EDID data. Since this
 	  feature is provided as a workaround for broken hardware, the
 	  default case is N. Details and instructions how to build your own
-	  EDID data are given in Documentation/EDID/HOWTO.txt.
+	  EDID data are given in Documentation/EDID/howto.rst.
 
 config DRM_DP_CEC
 	bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"