Commit a32e0c77 authored by Axel Lin's avatar Axel Lin Committed by Mark Brown

regulator: core: Add set/get_current_limit helpers for regmap users

By setting curr_table, n_current_limits, csel_reg and csel_mask, the
regmap users can use regulator_set_current_limit_regmap and
regulator_get_current_limit_regmap for set/get_current_limit callbacks.
Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 35d838ff
......@@ -780,3 +780,89 @@ int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
rdev->desc->active_discharge_mask, val);
}
EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap);
/**
* regulator_set_current_limit_regmap - set_current_limit for regmap users
*
* @rdev: regulator to operate on
* @min_uA: Lower bound for current limit
* @max_uA: Upper bound for current limit
*
* Regulators that use regmap for their register I/O can set curr_table,
* csel_reg and csel_mask fields in their descriptor and then use this
* as their set_current_limit operation, saving some code.
*/
int regulator_set_current_limit_regmap(struct regulator_dev *rdev,
int min_uA, int max_uA)
{
unsigned int n_currents = rdev->desc->n_current_limits;
int i, sel = -1;
if (n_currents == 0)
return -EINVAL;
if (rdev->desc->curr_table) {
const unsigned int *curr_table = rdev->desc->curr_table;
bool ascend = curr_table[n_currents - 1] > curr_table[0];
/* search for closest to maximum */
if (ascend) {
for (i = n_currents - 1; i >= 0; i--) {
if (min_uA <= curr_table[i] &&
curr_table[i] <= max_uA) {
sel = i;
break;
}
}
} else {
for (i = 0; i < n_currents; i++) {
if (min_uA <= curr_table[i] &&
curr_table[i] <= max_uA) {
sel = i;
break;
}
}
}
}
if (sel < 0)
return -EINVAL;
sel <<= ffs(rdev->desc->csel_mask) - 1;
return regmap_update_bits(rdev->regmap, rdev->desc->csel_reg,
rdev->desc->csel_mask, sel);
}
EXPORT_SYMBOL_GPL(regulator_set_current_limit_regmap);
/**
* regulator_get_current_limit_regmap - get_current_limit for regmap users
*
* @rdev: regulator to operate on
*
* Regulators that use regmap for their register I/O can set the
* csel_reg and csel_mask fields in their descriptor and then use this
* as their get_current_limit operation, saving some code.
*/
int regulator_get_current_limit_regmap(struct regulator_dev *rdev)
{
unsigned int val;
int ret;
ret = regmap_read(rdev->regmap, rdev->desc->csel_reg, &val);
if (ret != 0)
return ret;
val &= rdev->desc->csel_mask;
val >>= ffs(rdev->desc->csel_mask) - 1;
if (rdev->desc->curr_table) {
if (val >= rdev->desc->n_current_limits)
return -EINVAL;
return rdev->desc->curr_table[val];
}
return -EINVAL;
}
EXPORT_SYMBOL_GPL(regulator_get_current_limit_regmap);
......@@ -264,6 +264,7 @@ enum regulator_type {
* @continuous_voltage_range: Indicates if the regulator can set any
* voltage within constrains range.
* @n_voltages: Number of selectors available for ops.list_voltage().
* @n_current_limits: Number of selectors available for current limits
*
* @min_uV: Voltage given by the lowest selector (if linear mapping)
* @uV_step: Voltage increase with each selector (if linear mapping)
......@@ -278,6 +279,7 @@ enum regulator_type {
* @n_linear_ranges: Number of entries in the @linear_ranges (and in
* linear_range_selectors if used) table(s).
* @volt_table: Voltage mapping table (if table based mapping)
* @curr_table: Current limit mapping table (if table based mapping)
*
* @vsel_range_reg: Register for range selector when using pickable ranges
* and regulator_regmap_X_voltage_X_pickable functions.
......@@ -333,6 +335,7 @@ struct regulator_desc {
int id;
unsigned int continuous_voltage_range:1;
unsigned n_voltages;
unsigned int n_current_limits;
const struct regulator_ops *ops;
int irq;
enum regulator_type type;
......@@ -351,6 +354,7 @@ struct regulator_desc {
int n_linear_ranges;
const unsigned int *volt_table;
const unsigned int *curr_table;
unsigned int vsel_range_reg;
unsigned int vsel_range_mask;
......@@ -534,6 +538,9 @@ int regulator_set_pull_down_regmap(struct regulator_dev *rdev);
int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
bool enable);
int regulator_set_current_limit_regmap(struct regulator_dev *rdev,
int min_uA, int max_uA);
int regulator_get_current_limit_regmap(struct regulator_dev *rdev);
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
void regulator_lock(struct regulator_dev *rdev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment