Merge tag 'samsung-dt-2' of...

Merge tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "Samsung 2nd DT updates for v3.20" from Kukjin Kim:

- for all of Samsung SoCs
  : use generic power domain bindings
  : add 'dr_mode' property for hsotg/dwc2 devices

- exynos3250-rinato and exynos3250-monk
  : add regulator-haptic

- exynos5422-odroidxu3
  : reduce total RAM by 22 MiB because last 22 MiB
    for secure monitor cannot be accessed by kernel
  : add on-board INA231 sensors and LDO26 of PMIC
    for the sensors

* tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: reduce total RAM by 22 MiB for exynos5422-odroidxu3
  ARM: dts: add on-board INA231 sensors for exynos5422-odroidxu3
  ARM: dts: Add regulator-haptic node for exynos3250-monk
  ARM: dts: Add regulator-haptic node for exynos3250-rinato
  ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards
  ARM: dts: convert to generic power domain bindings for exynos DT
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/exynos/power_domain.txt

@@ -23,7 +23,7 @@ Optional Properties:
 		devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
 		are supported currently.
 
-Node of a device using power domains must have a samsung,power-domain property
+Node of a device using power domains must have a power-domains property
 defined with a phandle to respective power domain.
 
 Example:

Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt

@@ -45,7 +45,7 @@ Required properties:
 	       Exynos4 SoCs, there needs no "master" clock.
 	       Exynos5 SoCs, some System MMUs must have "master" clocks.
 - clocks: Required if the System MMU is needed to gate its clock.
-- samsung,power-domain: Required if the System MMU is needed to gate its power.
+- power-domains: Required if the System MMU is needed to gate its power.
 	  Please refer to the following document:
 	  Documentation/devicetree/bindings/arm/exynos/power_domain.txt
 
@@ -54,7 +54,7 @@ Examples:
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
 	};
@@ -66,5 +66,5 @@ Examples:
 		interrupts = <2 0>;
 		clock-names = "sysmmu", "master";
 		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 	};

Documentation/devicetree/bindings/media/s5p-mfc.txt

@@ -28,7 +28,7 @@ Required properties:
 		    for DMA contiguous memory allocation and its size.
 
 Optional properties:
-  - samsung,power-domain : power-domain property defined with a phandle
+  - power-domains : power-domain property defined with a phandle
 			   to respective power domain.
 
 Example:
@@ -38,7 +38,7 @@ mfc: codec@13400000 {
 	compatible = "samsung,mfc-v5";
 	reg = <0x13400000 0x10000>;
 	interrupts = <0 94 0>;
-	samsung,power-domain = <&pd_mfc>;
+	power-domains = <&pd_mfc>;
 	clocks = <&clock 273>;
 	clock-names = "mfc";
 };

Documentation/devicetree/bindings/video/exynos_dsim.txt

@@ -21,7 +21,7 @@ Required properties:
     according to DSI host bindings (see MIPI DSI bindings [1])
 
 Optional properties:
-  - samsung,power-domain: a phandle to DSIM power domain node
+  - power-domains: a phandle to DSIM power domain node
 
 Child nodes:
   Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
@@ -53,7 +53,7 @@ Example:
 		phy-names = "dsim";
 		vddcore-supply = <&vusb_reg>;
 		vddio-supply = <&vmipi_reg>;
-		samsung,power-domain = <&pd_lcd0>;
+		power-domains = <&pd_lcd0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		samsung,pll-clock-frequency = <24000000>;

Documentation/devicetree/bindings/video/samsung-fimd.txt

@@ -38,7 +38,7 @@ Required properties:
                property. Must contain "sclk_fimd" and "fimd".
 
 Optional Properties:
-- samsung,power-domain: a phandle to FIMD power domain node.
+- power-domains: a phandle to FIMD power domain node.
 - samsung,invert-vden: video enable signal is inverted
 - samsung,invert-vclk: video clock signal is inverted
 - display-timings: timing settings for FIMD, as described in document [1].
@@ -97,7 +97,7 @@ SoC specific DT entry:
 		interrupts = <11 0>, <11 1>, <11 2>;
 		clocks = <&clock 140>, <&clock 283>;
 		clock-names = "sclk_fimd", "fimd";
-		samsung,power-domain = <&pd_lcd0>;
+		power-domains = <&pd_lcd0>;
 		status = "disabled";
 	};
 

arch/arm/boot/dts/exynos3250-monk.dts

@@ -108,6 +108,13 @@ charger {
 			};
 		};
 	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&motor_reg>;
+		min-microvolt = <1100000>;
+		max-microvolt = <2700000>;
+	};
 };
 
 &adc {
@@ -140,6 +147,7 @@ &exynos_usbphy {
 &hsotg {
 	vusb_d-supply = <&ldo15_reg>;
 	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
 	status = "okay";
 };
 

arch/arm/boot/dts/exynos3250-rinato.dts

@@ -99,6 +99,13 @@ charger {
 			};
 		};
 	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&motor_reg>;
+		min-microvolt = <1100000>;
+		max-microvolt = <2700000>;
+	};
 };
 
 &adc {
@@ -131,6 +138,7 @@ &exynos_usbphy {
 &hsotg {
 	vusb_d-supply = <&ldo15_reg>;
 	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
 	status = "okay";
 };
 

arch/arm/boot/dts/exynos3250.dtsi

@@ -141,26 +141,31 @@ mipi_phy: video-phy@10020710 {
 		pd_cam: cam-power-domain@10023C00 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10023C00 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_mfc: mfc-power-domain@10023C40 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10023C40 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_g3d: g3d-power-domain@10023C60 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10023C60 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_lcd0: lcd0-power-domain@10023C80 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10023C80 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_isp: isp-power-domain@10023CA0 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10023CA0 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		cmu: clock-controller@10030000 {
@@ -235,7 +240,7 @@ fimd: fimd@11c00000 {
 			interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
 			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
 			clock-names = "sclk_fimd", "fimd";
-			samsung,power-domain = <&pd_lcd0>;
+			power-domains = <&pd_lcd0>;
 			samsung,sysreg = <&sys_reg>;
 			status = "disabled";
 		};
@@ -245,7 +250,7 @@ dsi_0: dsi@11C80000 {
 			reg = <0x11C80000 0x10000>;
 			interrupts = <0 83 0>;
 			samsung,phy-type = <0>;
-			samsung,power-domain = <&pd_lcd0>;
+			power-domains = <&pd_lcd0>;
 			phys = <&mipi_phy 1>;
 			phy-names = "dsim";
 			clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>;
@@ -348,7 +353,7 @@ mfc: codec@13400000 {
 			interrupts = <0 102 0>;
 			clock-names = "mfc", "sclk_mfc";
 			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
-			samsung,power-domain = <&pd_mfc>;
+			power-domains = <&pd_mfc>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/exynos4.dtsi

@@ -81,36 +81,43 @@ mipi_phy: video-phy@10020710 {
 	pd_mfc: mfc-power-domain@10023C40 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C40 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_g3d: g3d-power-domain@10023C60 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C60 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_lcd0: lcd0-power-domain@10023C80 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C80 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_tv: tv-power-domain@10023C20 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C20 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_cam: cam-power-domain@10023C00 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C00 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_gps: gps-power-domain@10023CE0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CE0 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_gps_alive: gps-alive-power-domain@10023D00 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023D00 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	gic: interrupt-controller@10490000 {
@@ -147,7 +154,7 @@ dsi_0: dsi@11C80000 {
 		compatible = "samsung,exynos4210-mipi-dsi";
 		reg = <0x11C80000 0x10000>;
 		interrupts = <0 79 0>;
-		samsung,power-domain = <&pd_lcd0>;
+		power-domains = <&pd_lcd0>;
 		phys = <&mipi_phy 1>;
 		phy-names = "dsim";
 		clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
@@ -172,7 +179,7 @@ fimc_0: fimc@11800000 {
 			interrupts = <0 84 0>;
 			clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
 			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
+			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
 			status = "disabled";
 		};
@@ -183,7 +190,7 @@ fimc_1: fimc@11810000 {
 			interrupts = <0 85 0>;
 			clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
 			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
+			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
 			status = "disabled";
 		};
@@ -194,7 +201,7 @@ fimc_2: fimc@11820000 {
 			interrupts = <0 86 0>;
 			clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
 			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
+			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
 			status = "disabled";
 		};
@@ -205,7 +212,7 @@ fimc_3: fimc@11830000 {
 			interrupts = <0 87 0>;
 			clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
 			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
+			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
 			status = "disabled";
 		};
@@ -217,7 +224,7 @@ csis_0: csis@11880000 {
 			clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <4>;
-			samsung,power-domain = <&pd_cam>;
+			power-domains = <&pd_cam>;
 			phys = <&mipi_phy 0>;
 			phy-names = "csis";
 			status = "disabled";
@@ -232,7 +239,7 @@ csis_1: csis@11890000 {
 			clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <2>;
-			samsung,power-domain = <&pd_cam>;
+			power-domains = <&pd_cam>;
 			phys = <&mipi_phy 2>;
 			phy-names = "csis";
 			status = "disabled";
@@ -391,7 +398,7 @@ mfc: codec@13400000 {
 		compatible = "samsung,mfc-v5";
 		reg = <0x13400000 0x10000>;
 		interrupts = <0 94 0>;
-		samsung,power-domain = <&pd_mfc>;
+		power-domains = <&pd_mfc>;
 		clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
 		clock-names = "mfc", "sclk_mfc";
 		status = "disabled";
@@ -641,7 +648,7 @@ fimd: fimd@11c00000 {
 		interrupts = <11 0>, <11 1>, <11 2>;
 		clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
 		clock-names = "sclk_fimd", "fimd";
-		samsung,power-domain = <&pd_lcd0>;
+		power-domains = <&pd_lcd0>;
 		samsung,sysreg = <&sys_reg>;
 		status = "disabled";
 	};

arch/arm/boot/dts/exynos4210-trats.dts

@@ -91,6 +91,7 @@ vt_core_15v_reg: regulator-5 {
 	hsotg@12480000 {
 		vusb_d-supply = <&vusb_reg>;
 		vusb_a-supply = <&vusbdac_reg>;
+		dr_mode = "peripheral";
 		status = "okay";
 	};
 

arch/arm/boot/dts/exynos4210-universal_c210.dts

@@ -71,6 +71,7 @@ vemmc_reg: voltage-regulator {
 	hsotg@12480000 {
 		vusb_d-supply = <&ldo3_reg>;
 		vusb_a-supply = <&ldo8_reg>;
+		dr_mode = "peripheral";
 		status = "okay";
 	};
 

arch/arm/boot/dts/exynos4210.dtsi

@@ -79,6 +79,7 @@ smp-sysram@1f000 {
 	pd_lcd1: lcd1-power-domain@10023CA0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CA0 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	gic: interrupt-controller@10490000 {

arch/arm/boot/dts/exynos4412-odroid-common.dtsi

@@ -381,6 +381,7 @@ exynos-usbphy@125B0000 {
 	};
 
 	hsotg@12480000 {
+		dr_mode = "peripheral";
 		status = "okay";
 		vusb_d-supply = <&ldo15_reg>;
 		vusb_a-supply = <&ldo12_reg>;

arch/arm/boot/dts/exynos4412-trats2.dts

@@ -845,6 +845,7 @@ exynos-usbphy@125B0000 {
 	hsotg@12480000 {
 		vusb_d-supply = <&ldo15_reg>;
 		vusb_a-supply = <&ldo12_reg>;
+		dr_mode = "peripheral";
 		status = "okay";
 	};
 

arch/arm/boot/dts/exynos4415.dtsi

@@ -131,36 +131,43 @@ mipi_phy: video-phy@10020710 {
 		pd_cam: cam-power-domain@10024000 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10024000 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_tv: tv-power-domain@10024020 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10024020 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_mfc: mfc-power-domain@10024040 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10024040 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_g3d: g3d-power-domain@10024060 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10024060 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_lcd0: lcd0-power-domain@10024080 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10024080 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_isp0: isp0-power-domain@100240A0 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x100240A0 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		pd_isp1: isp1-power-domain@100240E0 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x100240E0 0x20>;
+			#power-domain-cells = <0>;
 		};
 
 		cmu: clock-controller@10030000 {

arch/arm/boot/dts/exynos4x12.dtsi

@@ -52,6 +52,7 @@ smp-sysram@2f000 {
 	pd_isp: isp-power-domain@10023CA0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023CA0 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	clock: clock-controller@10030000 {
@@ -195,7 +196,7 @@ fimc_lite_0: fimc-lite@12390000 {
 			compatible = "samsung,exynos4212-fimc-lite";
 			reg = <0x12390000 0x1000>;
 			interrupts = <0 105 0>;
-			samsung,power-domain = <&pd_isp>;
+			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE0>;
 			clock-names = "flite";
 			status = "disabled";
@@ -205,7 +206,7 @@ fimc_lite_1: fimc-lite@123A0000 {
 			compatible = "samsung,exynos4212-fimc-lite";
 			reg = <0x123A0000 0x1000>;
 			interrupts = <0 106 0>;
-			samsung,power-domain = <&pd_isp>;
+			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE1>;
 			clock-names = "flite";
 			status = "disabled";
@@ -215,7 +216,7 @@ fimc_is: fimc-is@12000000 {
 			compatible = "samsung,exynos4212-fimc-is", "simple-bus";
 			reg = <0x12000000 0x260000>;
 			interrupts = <0 90 0>, <0 95 0>;
-			samsung,power-domain = <&pd_isp>;
+			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE0>,
 				 <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
 				 <&clock CLK_PPMUISPMX>,

arch/arm/boot/dts/exynos5250.dtsi

@@ -93,11 +93,13 @@ smp-sysram@2f000 {
 	pd_gsc: gsc-power-domain@10044000 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044000 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pd_mfc: mfc-power-domain@10044040 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044040 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	clock: clock-controller@10010000 {
@@ -222,7 +224,7 @@ mfc: codec@11000000 {
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
-		samsung,power-domain = <&pd_mfc>;
+		power-domains = <&pd_mfc>;
 		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
 	};
@@ -682,7 +684,7 @@ gsc_0:  gsc@13e00000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
 	};
@@ -691,7 +693,7 @@ gsc_1:  gsc@13e10000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL1>;
 		clock-names = "gscl";
 	};
@@ -700,7 +702,7 @@ gsc_2:  gsc@13e20000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL2>;
 		clock-names = "gscl";
 	};
@@ -709,7 +711,7 @@ gsc_3:  gsc@13e30000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL3>;
 		clock-names = "gscl";
 	};

arch/arm/boot/dts/exynos5420.dtsi

@@ -178,7 +178,7 @@ mfc: codec@11000000 {
 		interrupts = <0 96 0>;
 		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
-		samsung,power-domain = <&mfc_pd>;
+		power-domains = <&mfc_pd>;
 	};
 
 	mmc_0: mmc@12200000 {
@@ -250,11 +250,13 @@ mct_map: mct-map {
 	gsc_pd: power-domain@10044000 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044000 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	isp_pd: power-domain@10044020 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044020 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	mfc_pd: power-domain@10044060 {
@@ -263,11 +265,13 @@ mfc_pd: power-domain@10044060 {
 		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
 			<&clock CLK_MOUT_USER_ACLK333>;
 		clock-names = "oscclk", "pclk0", "clk0";
+		#power-domain-cells = <0>;
 	};
 
 	msc_pd: power-domain@10044120 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044120 0x20>;
+		#power-domain-cells = <0>;
 	};
 
 	pinctrl_0: pinctrl@13400000 {
@@ -730,7 +734,7 @@ gsc_0: video-scaler@13e00000 {
 		interrupts = <0 85 0>;
 		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
-		samsung,power-domain = <&gsc_pd>;
+		power-domains = <&gsc_pd>;
 	};
 
 	gsc_1: video-scaler@13e10000 {
@@ -739,7 +743,7 @@ gsc_1: video-scaler@13e10000 {
 		interrupts = <0 86 0>;
 		clocks = <&clock CLK_GSCL1>;
 		clock-names = "gscl";
-		samsung,power-domain = <&gsc_pd>;
+		power-domains = <&gsc_pd>;
 	};
 
 	pmu_system_controller: system-controller@10040000 {

arch/arm/boot/dts/exynos5422-odroidxu3.dts

@@ -18,7 +18,7 @@ / {
 	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
 
 	memory {
-		reg = <0x40000000 0x80000000>;
+		reg = <0x40000000 0x7EA00000>;
 	};
 
 	chosen {
@@ -174,6 +174,13 @@ ldo24_reg: LDO24 {
 					regulator-always-on;
 				};
 
+				ldo26_reg: LDO26 {
+					regulator-name = "vdd_ldo26";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
 				buck1_reg: BUCK1 {
 					regulator-name = "vdd_mif";
 					regulator-min-microvolt = <800000>;
@@ -330,3 +337,35 @@ &usbdrd_dwc3_0 {
 &usbdrd_dwc3_1 {
 	dr_mode = "otg";
 };
+
+&i2c_0 {
+	status = "okay";
+
+	/* A15 cluster: VDD_ARM */
+	ina231@40 {
+		compatible = "ti,ina231";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+	};
+
+	/* memory: VDD_MEM */
+	ina231@41 {
+		compatible = "ti,ina231";
+		reg = <0x41>;
+		shunt-resistor = <10000>;
+	};
+
+	/* GPU: VDD_G3D */
+	ina231@44 {
+		compatible = "ti,ina231";
+		reg = <0x44>;
+		shunt-resistor = <10000>;
+	};
+
+	/* A7 cluster: VDD_KFC */
+	ina231@45 {
+		compatible = "ti,ina231";
+		reg = <0x45>;
+		shunt-resistor = <10000>;
+	};
+};

arch/arm/boot/dts/s5pv210-aquila.dts

@@ -355,6 +355,7 @@ &onenand {
 &hsotg {
 	vusb_a-supply = <&ldo3_reg>;
 	vusb_d-supply = <&ldo8_reg>;
+	dr_mode = "peripheral";
 	status = "okay";
 };
 

arch/arm/boot/dts/s5pv210-goni.dts

@@ -333,6 +333,7 @@ &sdhci2 {
 &hsotg {
 	vusb_a-supply = <&ldo3_reg>;
 	vusb_d-supply = <&ldo8_reg>;
+	dr_mode = "peripheral";
 	status = "okay";
 };
 

arch/arm/boot/dts/s5pv210-smdkv210.dts

@@ -181,6 +181,7 @@ &sdhci3 {
 };
 
 &hsotg {
+	dr_mode = "peripheral";
 	status = "okay";
 };