Commit a3e92e7b authored by Tony Lindgren's avatar Tony Lindgren

bus: ti-sysc: Allocate mdata as needed and do platform data based init later

The platform data based init functions typically reset the interconnect
target module configure the registers. As we may need the interconnect
target module specific quirks configured based on the revision register,
we want to move the platform data based init to happen later.

Let's allocate mdata as needed so it's available for sysc_legacy_init()
that we call with module clocks enabled from sysc_init_module().
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 1a5cd7c2
...@@ -75,6 +75,7 @@ struct sysc { ...@@ -75,6 +75,7 @@ struct sysc {
u32 module_size; u32 module_size;
void __iomem *module_va; void __iomem *module_va;
int offsets[SYSC_MAX_REGS]; int offsets[SYSC_MAX_REGS];
struct ti_sysc_module_data *mdata;
struct clk **clocks; struct clk **clocks;
const char **clock_roles; const char **clock_roles;
int nr_clocks; int nr_clocks;
...@@ -1012,6 +1013,26 @@ static void sysc_init_revision_quirks(struct sysc *ddata) ...@@ -1012,6 +1013,26 @@ static void sysc_init_revision_quirks(struct sysc *ddata)
} }
} }
/*
* Note that pdata->init_module() typically does a reset first. After
* pdata->init_module() is done, PM runtime can be used for the interconnect
* target module.
*/
static int sysc_legacy_init(struct sysc *ddata)
{
struct ti_sysc_platform_data *pdata = dev_get_platdata(ddata->dev);
int error;
if (!ddata->legacy_mode || !pdata || !pdata->init_module)
return 0;
error = pdata->init_module(ddata->dev, ddata->mdata, &ddata->cookie);
if (error == -EEXIST)
error = 0;
return error;
}
static int sysc_reset(struct sysc *ddata) static int sysc_reset(struct sysc *ddata)
{ {
int offset = ddata->offsets[SYSC_SYSCONFIG]; int offset = ddata->offsets[SYSC_SYSCONFIG];
...@@ -1070,10 +1091,15 @@ static int sysc_init_module(struct sysc *ddata) ...@@ -1070,10 +1091,15 @@ static int sysc_init_module(struct sysc *ddata)
ddata->revision = sysc_read_revision(ddata); ddata->revision = sysc_read_revision(ddata);
sysc_init_revision_quirks(ddata); sysc_init_revision_quirks(ddata);
error = sysc_legacy_init(ddata);
if (error)
goto err_main_clocks;
error = sysc_reset(ddata); error = sysc_reset(ddata);
if (error) if (error)
dev_err(ddata->dev, "Reset failed with %d\n", error); dev_err(ddata->dev, "Reset failed with %d\n", error);
err_main_clocks:
if (manage_clocks) if (manage_clocks)
sysc_disable_main_clocks(ddata); sysc_disable_main_clocks(ddata);
err_opt_clocks: err_opt_clocks:
...@@ -1715,28 +1741,26 @@ static const struct sysc_capabilities sysc_dra7_mcan = { ...@@ -1715,28 +1741,26 @@ static const struct sysc_capabilities sysc_dra7_mcan = {
static int sysc_init_pdata(struct sysc *ddata) static int sysc_init_pdata(struct sysc *ddata)
{ {
struct ti_sysc_platform_data *pdata = dev_get_platdata(ddata->dev); struct ti_sysc_platform_data *pdata = dev_get_platdata(ddata->dev);
struct ti_sysc_module_data mdata; struct ti_sysc_module_data *mdata;
int error = 0;
if (!pdata || !ddata->legacy_mode) if (!pdata || !ddata->legacy_mode)
return 0; return 0;
mdata.name = ddata->legacy_mode; mdata = devm_kzalloc(ddata->dev, sizeof(*mdata), GFP_KERNEL);
mdata.module_pa = ddata->module_pa; if (!mdata)
mdata.module_size = ddata->module_size; return -ENOMEM;
mdata.offsets = ddata->offsets;
mdata.nr_offsets = SYSC_MAX_REGS;
mdata.cap = ddata->cap;
mdata.cfg = &ddata->cfg;
if (!pdata->init_module) mdata->name = ddata->legacy_mode;
return -ENODEV; mdata->module_pa = ddata->module_pa;
mdata->module_size = ddata->module_size;
mdata->offsets = ddata->offsets;
mdata->nr_offsets = SYSC_MAX_REGS;
mdata->cap = ddata->cap;
mdata->cfg = &ddata->cfg;
error = pdata->init_module(ddata->dev, &mdata, &ddata->cookie); ddata->mdata = mdata;
if (error == -EEXIST)
error = 0;
return error; return 0;
} }
static int sysc_init_match(struct sysc *ddata) static int sysc_init_match(struct sysc *ddata)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment