Commit a41332dd authored by Olof Johansson's avatar Olof Johansson

Merge tag 'socfpga_dts_updates_for_v5.2' of...

Merge tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.2
- Add base support for Agilex platform
- Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform
- Increase Stratix10 QSPI support to 100 MHz

* tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA
  arm64: dts: stratix10: increase QSPI max frequency to 100MHz
  arm64: dts: stratix10: enable MMC highspeed support
  ARM: dts: socfpga: enable MMC highspeed support
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents d7f76ac4 4b36daf9
......@@ -9,6 +9,7 @@
&mmc {
status = "okay";
cap-sd-highspeed;
cap-mmc-highspeed;
broken-cd;
bus-width = <4>;
};
......
......@@ -7,6 +7,11 @@ config ARCH_ACTIONS
help
This enables support for the Actions Semiconductor S900 SoC family.
config ARCH_AGILEX
bool "Intel's Agilex SoCFPGA Family"
help
This enables support for Intel's Agilex SoCFPGA Family.
config ARCH_SUNXI
bool "Allwinner sunxi 64-bit SoC Family"
select ARCH_HAS_RESET_CONTROLLER
......
......@@ -13,6 +13,7 @@ subdir-y += cavium
subdir-y += exynos
subdir-y += freescale
subdir-y += hisilicon
subdir-y += intel
subdir-y += lg
subdir-y += marvell
subdir-y += mediatek
......
......@@ -107,6 +107,7 @@ phy0: ethernet-phy@0 {
&mmc {
status = "okay";
cap-sd-highspeed;
cap-mmc-highspeed;
broken-cd;
bus-width = <4>;
};
......@@ -159,7 +160,7 @@ flash@0 {
#size-cells = <1>;
compatible = "n25q00a";
reg = <0>;
spi-max-frequency = <50000000>;
spi-max-frequency = <100000000>;
m25p,fast-read;
cdns,page-size = <256>;
......
dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb
This diff is collapsed.
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2019, Intel Corporation
*/
#include "socfpga_agilex.dtsi"
/ {
model = "SoCFPGA Agilex SoCDK";
aliases {
serial0 = &uart0;
ethernet0 = &gmac0;
ethernet1 = &gmac1;
ethernet2 = &gmac2;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
reg = <0 0 0 0>;
};
};
&gpio1 {
status = "okay";
};
&gmac0 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&phy0>;
max-frame-size = <9000>;
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0: ethernet-phy@0 {
reg = <4>;
txd0-skew-ps = <0>; /* -420ps */
txd1-skew-ps = <0>; /* -420ps */
txd2-skew-ps = <0>; /* -420ps */
txd3-skew-ps = <0>; /* -420ps */
rxd0-skew-ps = <420>; /* 0ps */
rxd1-skew-ps = <420>; /* 0ps */
rxd2-skew-ps = <420>; /* 0ps */
rxd3-skew-ps = <420>; /* 0ps */
txen-skew-ps = <0>; /* -420ps */
txc-skew-ps = <900>; /* 0ps */
rxdv-skew-ps = <420>; /* 0ps */
rxc-skew-ps = <1680>; /* 780ps */
};
};
};
&mmc {
status = "okay";
cap-sd-highspeed;
broken-cd;
bus-width = <4>;
};
&uart0 {
status = "okay";
};
&watchdog0 {
status = "okay";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment