bpf, x64: implement retpoline for tail call

Implement a retpoline [0] for the BPF tail call JIT'ing that converts
the indirect jump via jmp %rax that is used to make the long jump into
another JITed BPF image. Since this is subject to speculative execution,
we need to control the transient instruction sequence here as well
when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop.
The latter aligns also with what gcc / clang emits (e.g. [1]).

JIT dump after patch:

  # bpftool p d x i 1
   0: (18) r2 = map[id:1]
   2: (b7) r3 = 0
   3: (85) call bpf_tail_call#12
   4: (b7) r0 = 2
   5: (95) exit

With CONFIG_RETPOLINE:

  # bpftool p d j i 1
  [...]
  33:	cmp    %edx,0x24(%rsi)
  36:	jbe    0x0000000000000072  |*
  38:	mov    0x24(%rbp),%eax
  3e:	cmp    $0x20,%eax
  41:	ja     0x0000000000000072  |
  43:	add    $0x1,%eax
  46:	mov    %eax,0x24(%rbp)
  4c:	mov    0x90(%rsi,%rdx,8),%rax
  54:	test   %rax,%rax
  57:	je     0x0000000000000072  |
  59:	mov    0x28(%rax),%rax
  5d:	add    $0x25,%rax
  61:	callq  0x000000000000006d  |+
  66:	pause                      |
  68:	lfence                     |
  6b:	jmp    0x0000000000000066  |
  6d:	mov    %rax,(%rsp)         |
  71:	retq                       |
  72:	mov    $0x2,%eax
  [...]

  * relative fall-through jumps in error case
  + retpoline for indirect jump

Without CONFIG_RETPOLINE:

  # bpftool p d j i 1
  [...]
  33:	cmp    %edx,0x24(%rsi)
  36:	jbe    0x0000000000000063  |*
  38:	mov    0x24(%rbp),%eax
  3e:	cmp    $0x20,%eax
  41:	ja     0x0000000000000063  |
  43:	add    $0x1,%eax
  46:	mov    %eax,0x24(%rbp)
  4c:	mov    0x90(%rsi,%rdx,8),%rax
  54:	test   %rax,%rax
  57:	je     0x0000000000000063  |
  59:	mov    0x28(%rax),%rax
  5d:	add    $0x25,%rax
  61:	jmpq   *%rax               |-
  63:	mov    $0x2,%eax
  [...]

  * relative fall-through jumps in error case
  - plain indirect jump as before

  [0] https://support.google.com/faqs/answer/7625886
  [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2bSigned-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

arch/x86/include/asm/nospec-branch.h

@@ -177,4 +177,41 @@ static inline void indirect_branch_prediction_barrier(void)
 }
 
 #endif /* __ASSEMBLY__ */
+
+/*
+ * Below is used in the eBPF JIT compiler and emits the byte sequence
+ * for the following assembly:
+ *
+ * With retpolines configured:
+ *
+ *    callq do_rop
+ *  spec_trap:
+ *    pause
+ *    lfence
+ *    jmp spec_trap
+ *  do_rop:
+ *    mov %rax,(%rsp)
+ *    retq
+ *
+ * Without retpolines configured:
+ *
+ *    jmp *%rax
+ */
+#ifdef CONFIG_RETPOLINE
+# define RETPOLINE_RAX_BPF_JIT_SIZE	17
+# define RETPOLINE_RAX_BPF_JIT()				\
+	EMIT1_off32(0xE8, 7);	 /* callq do_rop */		\
+	/* spec_trap: */					\
+	EMIT2(0xF3, 0x90);       /* pause */			\
+	EMIT3(0x0F, 0xAE, 0xE8); /* lfence */			\
+	EMIT2(0xEB, 0xF9);       /* jmp spec_trap */		\
+	/* do_rop: */						\
+	EMIT4(0x48, 0x89, 0x04, 0x24); /* mov %rax,(%rsp) */	\
+	EMIT1(0xC3);             /* retq */
+#else
+# define RETPOLINE_RAX_BPF_JIT_SIZE	2
+# define RETPOLINE_RAX_BPF_JIT()				\
+	EMIT2(0xFF, 0xE0);	 /* jmp *%rax */
+#endif
+
 #endif /* _ASM_X86_NOSPEC_BRANCH_H_ */

arch/x86/net/bpf_jit_comp.c

@@ -13,6 +13,7 @@
 #include <linux/if_vlan.h>
 #include <asm/cacheflush.h>
 #include <asm/set_memory.h>
+#include <asm/nospec-branch.h>
 #include <linux/bpf.h>
 
 /*
@@ -290,7 +291,7 @@ static void emit_bpf_tail_call(u8 **pprog)
 	EMIT2(0x89, 0xD2);                        /* mov edx, edx */
 	EMIT3(0x39, 0x56,                         /* cmp dword ptr [rsi + 16], edx */
 	      offsetof(struct bpf_array, map.max_entries));
-#define OFFSET1 43 /* number of bytes to jump */
+#define OFFSET1 (41 + RETPOLINE_RAX_BPF_JIT_SIZE) /* number of bytes to jump */
 	EMIT2(X86_JBE, OFFSET1);                  /* jbe out */
 	label1 = cnt;
 
@@ -299,7 +300,7 @@ static void emit_bpf_tail_call(u8 **pprog)
 	 */
 	EMIT2_off32(0x8B, 0x85, 36);              /* mov eax, dword ptr [rbp + 36] */
 	EMIT3(0x83, 0xF8, MAX_TAIL_CALL_CNT);     /* cmp eax, MAX_TAIL_CALL_CNT */
-#define OFFSET2 32
+#define OFFSET2 (30 + RETPOLINE_RAX_BPF_JIT_SIZE)
 	EMIT2(X86_JA, OFFSET2);                   /* ja out */
 	label2 = cnt;
 	EMIT3(0x83, 0xC0, 0x01);                  /* add eax, 1 */
@@ -313,7 +314,7 @@ static void emit_bpf_tail_call(u8 **pprog)
 	 *   goto out;
 	 */
 	EMIT3(0x48, 0x85, 0xC0);		  /* test rax,rax */
-#define OFFSET3 10
+#define OFFSET3 (8 + RETPOLINE_RAX_BPF_JIT_SIZE)
 	EMIT2(X86_JE, OFFSET3);                   /* je out */
 	label3 = cnt;
 
@@ -326,7 +327,7 @@ static void emit_bpf_tail_call(u8 **pprog)
 	 * rdi == ctx (1st arg)
 	 * rax == prog->bpf_func + prologue_size
 	 */
-	EMIT2(0xFF, 0xE0);                        /* jmp rax */
+	RETPOLINE_RAX_BPF_JIT();
 
 	/* out: */
 	BUILD_BUG_ON(cnt - label1 != OFFSET1);