V4L/DVB (12102): em28xx: add Remote control support for EVGA inDtube

Add an IR profile for the EVGA inDtube remote control (which is an NEC type
remote)
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/common/ir-keymaps.c

@@ -2750,3 +2750,26 @@ IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE] = {
 	[0x1b] = KEY_B,		/*recall*/
 };
 EXPORT_SYMBOL_GPL(ir_codes_dm1105_nec);
+
+/* EVGA inDtube
+   Devin Heitmueller <devin.heitmueller@gmail.com>
+ */
+IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE] = {
+	[0x12] = KEY_POWER,
+	[0x02] = KEY_MODE,	/* TV */
+	[0x14] = KEY_MUTE,
+	[0x1a] = KEY_CHANNELUP,
+	[0x16] = KEY_TV2,	/* PIP */
+	[0x1d] = KEY_VOLUMEUP,
+	[0x05] = KEY_CHANNELDOWN,
+	[0x0f] = KEY_PLAYPAUSE,
+	[0x19] = KEY_VOLUMEDOWN,
+	[0x1c] = KEY_REWIND,
+	[0x0d] = KEY_RECORD,
+	[0x18] = KEY_FORWARD,
+	[0x1e] = KEY_PREVIOUS,
+	[0x1b] = KEY_STOP,
+	[0x1f] = KEY_NEXT,
+	[0x13] = KEY_CAMERA,
+};
+EXPORT_SYMBOL_GPL(ir_codes_evga_indtube);

drivers/media/video/em28xx/em28xx-cards.c

@@ -1472,9 +1472,11 @@ struct em28xx_board em28xx_boards[] = {
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
+		.xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
 		.mts_firmware = 1,
 		.has_dvb      = 1,
 		.dvb_gpio     = evga_indtube_digital,
+		.ir_codes     = ir_codes_evga_indtube,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,

include/media/ir-common.h

@@ -162,6 +162,8 @@ extern IR_KEYTAB_TYPE ir_codes_ati_tv_wonder_hd_600[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_kworld_plus_tv_analog[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_kaiomy[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE];
+
 #endif
 
 /*