Commit a4f606ea authored by Chun-Yeow Yeoh's avatar Chun-Yeow Yeoh Committed by Johannes Berg

{nl,cfg,mac}80211: fix the coding style related to mesh parameters

fix the coding style related to mesh parameters, especially the indentation,
as pointed out by Johannes Berg.
Signed-off-by: default avatarChun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent 3ddd53f3
......@@ -1443,7 +1443,7 @@ enum ieee80211_tdls_actioncode {
*
* @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method
* @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method
* that will be specified in a vendor specific information element
* that will be specified in a vendor specific information element
*/
enum {
IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1,
......@@ -1455,7 +1455,7 @@ enum {
*
* @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
* @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
* be specified in a vendor specific information element
* be specified in a vendor specific information element
*/
enum {
IEEE80211_PATH_PROTOCOL_HWMP = 1,
......@@ -1467,7 +1467,7 @@ enum {
*
* @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
* @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
* specified in a vendor specific information element
* specified in a vendor specific information element
*/
enum {
IEEE80211_PATH_METRIC_AIRTIME = 1,
......
......@@ -2090,78 +2090,80 @@ enum nl80211_mntr_flags {
* @__NL80211_MESHCONF_INVALID: internal use
*
* @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
* millisecond units, used by the Peer Link Open message
* millisecond units, used by the Peer Link Open message
*
* @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
* millisecond units, used by the peer link management to close a peer link
* millisecond units, used by the peer link management to close a peer link
*
* @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
* millisecond units
* millisecond units
*
* @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
* on this mesh interface
* on this mesh interface
*
* @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
* open retries that can be sent to establish a new peer link instance in a
* mesh
* open retries that can be sent to establish a new peer link instance in a
* mesh
*
* @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
* point.
* point.
*
* @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
* open peer links when we detect compatible mesh peers.
* open peer links when we detect compatible mesh peers.
*
* @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
* containing a PREQ that an MP can send to a particular destination (path
* target)
* containing a PREQ that an MP can send to a particular destination (path
* target)
*
* @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
* (in milliseconds)
* (in milliseconds)
*
* @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
* until giving up on a path discovery (in milliseconds)
* until giving up on a path discovery (in milliseconds)
*
* @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
* points receiving a PREQ shall consider the forwarding information from the
* root to be valid. (TU = time unit)
* points receiving a PREQ shall consider the forwarding information from
* the root to be valid. (TU = time unit)
*
* @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
* TUs) during which an MP can send only one action frame containing a PREQ
* reference element
* TUs) during which an MP can send only one action frame containing a PREQ
* reference element
*
* @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
* that it takes for an HWMP information element to propagate across the mesh
* that it takes for an HWMP information element to propagate across the
* mesh
*
* @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
*
* @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
* source mesh point for path selection elements.
* source mesh point for path selection elements.
*
* @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between
* root announcements are transmitted.
* root announcements are transmitted.
*
* @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
* access to a broader network beyond the MBSS. This is done via Root
* Announcement frames.
* access to a broader network beyond the MBSS. This is done via Root
* Announcement frames.
*
* @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
* TUs) during which a mesh STA can send only one Action frame containing a
* PERR element.
* TUs) during which a mesh STA can send only one Action frame containing a
* PERR element.
*
* @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
* or forwarding entity (default is TRUE - forwarding entity)
* or forwarding entity (default is TRUE - forwarding entity)
*
* @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
* threshold for average signal strength of candidate station to establish
* a peer link.
*
* @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
* threshold for average signal strength of candidate station to establish
* a peer link.
*
* @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
* to synchronize to for 11s default synchronization method (see 11C.12.2.2)
* to synchronize to for 11s default synchronization method
* (see 11C.12.2.2)
*
* @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
*
* @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
*
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
*/
enum nl80211_meshconf_params {
......@@ -2203,34 +2205,36 @@ enum nl80211_meshconf_params {
* @__NL80211_MESH_SETUP_INVALID: Internal use
*
* @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
* vendor specific path selection algorithm or disable it to use the default
* HWMP.
* vendor specific path selection algorithm or disable it to use the
* default HWMP.
*
* @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
* vendor specific path metric or disable it to use the default Airtime
* metric.
* vendor specific path metric or disable it to use the default Airtime
* metric.
*
* @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
* robust security network ie, or a vendor specific information element that
* vendors will use to identify the path selection methods and metrics in use.
* robust security network ie, or a vendor specific information element
* that vendors will use to identify the path selection methods and
* metrics in use.
*
* @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
* daemon will be authenticating mesh candidates.
* daemon will be authenticating mesh candidates.
*
* @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
* daemon will be securing peer link frames. AMPE is a secured version of Mesh
* Peering Management (MPM) and is implemented with the assistance of a
* userspace daemon. When this flag is set, the kernel will send peer
* management frames to a userspace daemon that will implement AMPE
* functionality (security capabilities selection, key confirmation, and key
* management). When the flag is unset (default), the kernel can autonomously
* complete (unsecured) mesh peering without the need of a userspace daemon.
*
* @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
* daemon will be securing peer link frames. AMPE is a secured version of
* Mesh Peering Management (MPM) and is implemented with the assistance of
* a userspace daemon. When this flag is set, the kernel will send peer
* management frames to a userspace daemon that will implement AMPE
* functionality (security capabilities selection, key confirmation, and
* key management). When the flag is unset (default), the kernel can
* autonomously complete (unsecured) mesh peering without the need of a
* userspace daemon.
*
* @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
* vendor specific synchronization method or disable it to use the default
* neighbor offset synchronization
* vendor specific synchronization method or disable it to use the default
* neighbor offset synchronization
*
* @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
*
* @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
*/
......
......@@ -848,21 +848,21 @@ struct mesh_config {
u16 dot11MeshConfirmTimeout;
u16 dot11MeshHoldingTimeout;
u16 dot11MeshMaxPeerLinks;
u8 dot11MeshMaxRetries;
u8 dot11MeshTTL;
u8 element_ttl;
u8 dot11MeshMaxRetries;
u8 dot11MeshTTL;
u8 element_ttl;
bool auto_open_plinks;
u32 dot11MeshNbrOffsetMaxNeighbor;
u8 dot11MeshHWMPmaxPREQretries;
u8 dot11MeshHWMPmaxPREQretries;
u32 path_refresh_time;
u16 min_discovery_timeout;
u32 dot11MeshHWMPactivePathTimeout;
u16 dot11MeshHWMPpreqMinInterval;
u16 dot11MeshHWMPperrMinInterval;
u16 dot11MeshHWMPnetDiameterTraversalTime;
u8 dot11MeshHWMPRootMode;
u8 dot11MeshHWMPRootMode;
u16 dot11MeshHWMPRannInterval;
bool dot11MeshGateAnnouncementProtocol;
bool dot11MeshGateAnnouncementProtocol;
bool dot11MeshForwarding;
s32 rssi_threshold;
u16 ht_opmode;
......
......@@ -1571,10 +1571,9 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy,
conf->dot11MeshGateAnnouncementProtocol =
nconf->dot11MeshGateAnnouncementProtocol;
}
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_RANN_INTERVAL, mask)) {
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_RANN_INTERVAL, mask))
conf->dot11MeshHWMPRannInterval =
nconf->dot11MeshHWMPRannInterval;
}
if (_chg_mesh_attr(NL80211_MESHCONF_FORWARDING, mask))
conf->dot11MeshForwarding = nconf->dot11MeshForwarding;
if (_chg_mesh_attr(NL80211_MESHCONF_RSSI_THRESHOLD, mask)) {
......
......@@ -468,45 +468,45 @@ IEEE80211_IF_FILE(fwded_unicast, u.mesh.mshstats.fwded_unicast, DEC);
IEEE80211_IF_FILE(fwded_frames, u.mesh.mshstats.fwded_frames, DEC);
IEEE80211_IF_FILE(dropped_frames_ttl, u.mesh.mshstats.dropped_frames_ttl, DEC);
IEEE80211_IF_FILE(dropped_frames_congestion,
u.mesh.mshstats.dropped_frames_congestion, DEC);
u.mesh.mshstats.dropped_frames_congestion, DEC);
IEEE80211_IF_FILE(dropped_frames_no_route,
u.mesh.mshstats.dropped_frames_no_route, DEC);
u.mesh.mshstats.dropped_frames_no_route, DEC);
IEEE80211_IF_FILE(estab_plinks, u.mesh.mshstats.estab_plinks, ATOMIC);
/* Mesh parameters */
IEEE80211_IF_FILE(dot11MeshMaxRetries,
u.mesh.mshcfg.dot11MeshMaxRetries, DEC);
u.mesh.mshcfg.dot11MeshMaxRetries, DEC);
IEEE80211_IF_FILE(dot11MeshRetryTimeout,
u.mesh.mshcfg.dot11MeshRetryTimeout, DEC);
u.mesh.mshcfg.dot11MeshRetryTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshConfirmTimeout,
u.mesh.mshcfg.dot11MeshConfirmTimeout, DEC);
u.mesh.mshcfg.dot11MeshConfirmTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshHoldingTimeout,
u.mesh.mshcfg.dot11MeshHoldingTimeout, DEC);
u.mesh.mshcfg.dot11MeshHoldingTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshTTL, u.mesh.mshcfg.dot11MeshTTL, DEC);
IEEE80211_IF_FILE(element_ttl, u.mesh.mshcfg.element_ttl, DEC);
IEEE80211_IF_FILE(auto_open_plinks, u.mesh.mshcfg.auto_open_plinks, DEC);
IEEE80211_IF_FILE(dot11MeshMaxPeerLinks,
u.mesh.mshcfg.dot11MeshMaxPeerLinks, DEC);
u.mesh.mshcfg.dot11MeshMaxPeerLinks, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPactivePathTimeout,
u.mesh.mshcfg.dot11MeshHWMPactivePathTimeout, DEC);
u.mesh.mshcfg.dot11MeshHWMPactivePathTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPpreqMinInterval,
u.mesh.mshcfg.dot11MeshHWMPpreqMinInterval, DEC);
u.mesh.mshcfg.dot11MeshHWMPpreqMinInterval, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPperrMinInterval,
u.mesh.mshcfg.dot11MeshHWMPperrMinInterval, DEC);
u.mesh.mshcfg.dot11MeshHWMPperrMinInterval, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPnetDiameterTraversalTime,
u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime, DEC);
u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPmaxPREQretries,
u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries, DEC);
u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries, DEC);
IEEE80211_IF_FILE(path_refresh_time,
u.mesh.mshcfg.path_refresh_time, DEC);
u.mesh.mshcfg.path_refresh_time, DEC);
IEEE80211_IF_FILE(min_discovery_timeout,
u.mesh.mshcfg.min_discovery_timeout, DEC);
u.mesh.mshcfg.min_discovery_timeout, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPRootMode,
u.mesh.mshcfg.dot11MeshHWMPRootMode, DEC);
u.mesh.mshcfg.dot11MeshHWMPRootMode, DEC);
IEEE80211_IF_FILE(dot11MeshGateAnnouncementProtocol,
u.mesh.mshcfg.dot11MeshGateAnnouncementProtocol, DEC);
u.mesh.mshcfg.dot11MeshGateAnnouncementProtocol, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPRannInterval,
u.mesh.mshcfg.dot11MeshHWMPRannInterval, DEC);
u.mesh.mshcfg.dot11MeshHWMPRannInterval, DEC);
IEEE80211_IF_FILE(dot11MeshForwarding, u.mesh.mshcfg.dot11MeshForwarding, DEC);
IEEE80211_IF_FILE(rssi_threshold, u.mesh.mshcfg.rssi_threshold, DEC);
IEEE80211_IF_FILE(ht_opmode, u.mesh.mshcfg.ht_opmode, DEC);
......
......@@ -115,7 +115,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
[NL80211_ATTR_STA_VLAN] = { .type = NLA_U32 },
[NL80211_ATTR_MNTR_FLAGS] = { /* NLA_NESTED can't be empty */ },
[NL80211_ATTR_MESH_ID] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_MESH_ID_LEN },
.len = IEEE80211_MAX_MESH_ID_LEN },
[NL80211_ATTR_MPATH_NEXT_HOP] = { .type = NLA_U32 },
[NL80211_ATTR_REG_ALPHA2] = { .type = NLA_STRING, .len = 2 },
......@@ -3492,7 +3492,6 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
[NL80211_MESHCONF_ELEMENT_TTL] = { .type = NLA_U8 },
[NL80211_MESHCONF_AUTO_OPEN_PLINKS] = { .type = NLA_U8 },
[NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR] = { .type = NLA_U32 },
[NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES] = { .type = NLA_U8 },
[NL80211_MESHCONF_PATH_REFRESH_TIME] = { .type = NLA_U32 },
[NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT] = { .type = NLA_U16 },
......@@ -3504,8 +3503,8 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
[NL80211_MESHCONF_HWMP_RANN_INTERVAL] = { .type = NLA_U16 },
[NL80211_MESHCONF_GATE_ANNOUNCEMENTS] = { .type = NLA_U8 },
[NL80211_MESHCONF_FORWARDING] = { .type = NLA_U8 },
[NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32},
[NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16},
[NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32 },
[NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16 },
};
static const struct nla_policy
......@@ -3515,7 +3514,7 @@ static const struct nla_policy
[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC] = { .type = NLA_U8 },
[NL80211_MESH_SETUP_USERSPACE_AUTH] = { .type = NLA_FLAG },
[NL80211_MESH_SETUP_IE] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_MESH_SETUP_USERSPACE_AMPE] = { .type = NLA_FLAG },
};
......@@ -3548,63 +3547,71 @@ do {\
/* Fill in the params struct */
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshRetryTimeout,
mask, NL80211_MESHCONF_RETRY_TIMEOUT, nla_get_u16);
mask, NL80211_MESHCONF_RETRY_TIMEOUT,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConfirmTimeout,
mask, NL80211_MESHCONF_CONFIRM_TIMEOUT, nla_get_u16);
mask, NL80211_MESHCONF_CONFIRM_TIMEOUT,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHoldingTimeout,
mask, NL80211_MESHCONF_HOLDING_TIMEOUT, nla_get_u16);
mask, NL80211_MESHCONF_HOLDING_TIMEOUT,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxPeerLinks,
mask, NL80211_MESHCONF_MAX_PEER_LINKS, nla_get_u16);
mask, NL80211_MESHCONF_MAX_PEER_LINKS,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxRetries,
mask, NL80211_MESHCONF_MAX_RETRIES, nla_get_u8);
mask, NL80211_MESHCONF_MAX_RETRIES,
nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshTTL,
mask, NL80211_MESHCONF_TTL, nla_get_u8);
mask, NL80211_MESHCONF_TTL, nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, element_ttl,
mask, NL80211_MESHCONF_ELEMENT_TTL, nla_get_u8);
mask, NL80211_MESHCONF_ELEMENT_TTL,
nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, auto_open_plinks,
mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS, nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshNbrOffsetMaxNeighbor,
mask, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
nla_get_u32);
mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshNbrOffsetMaxNeighbor, mask,
NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
nla_get_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPmaxPREQretries,
mask, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
nla_get_u8);
mask, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, path_refresh_time,
mask, NL80211_MESHCONF_PATH_REFRESH_TIME, nla_get_u32);
mask, NL80211_MESHCONF_PATH_REFRESH_TIME,
nla_get_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, min_discovery_timeout,
mask, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout,
mask, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
nla_get_u32);
mask, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout, mask,
NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
nla_get_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPpreqMinInterval,
mask, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
nla_get_u16);
mask, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPperrMinInterval,
mask, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
dot11MeshHWMPnetDiameterTraversalTime,
mask, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
dot11MeshHWMPRootMode, mask,
NL80211_MESHCONF_HWMP_ROOTMODE,
nla_get_u8);
mask, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
dot11MeshHWMPRannInterval, mask,
NL80211_MESHCONF_HWMP_RANN_INTERVAL,
nla_get_u16);
dot11MeshHWMPnetDiameterTraversalTime, mask,
NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRootMode, mask,
NL80211_MESHCONF_HWMP_ROOTMODE, nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRannInterval, mask,
NL80211_MESHCONF_HWMP_RANN_INTERVAL,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
dot11MeshGateAnnouncementProtocol, mask,
NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
nla_get_u8);
dot11MeshGateAnnouncementProtocol, mask,
NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshForwarding,
mask, NL80211_MESHCONF_FORWARDING, nla_get_u8);
mask, NL80211_MESHCONF_FORWARDING,
nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold,
mask, NL80211_MESHCONF_RSSI_THRESHOLD, nla_get_u32);
mask, NL80211_MESHCONF_RSSI_THRESHOLD,
nla_get_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode,
mask, NL80211_MESHCONF_HT_OPMODE, nla_get_u16);
mask, NL80211_MESHCONF_HT_OPMODE,
nla_get_u16);
if (mask_out)
*mask_out = mask;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment