Commit a562a8ac authored by Johan Jonker's avatar Johan Jonker Committed by Heiko Stuebner

ARM: dts: rockchip: remove some tabs and spaces from dtsi files

Cleanup the Rockchip dtsi files a little bit
by removing some tabs and spaces.
Signed-off-by: default avatarJohan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20191014210619.12778-1-jbx6244@gmail.comSigned-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 463c5ac0
......@@ -696,8 +696,8 @@ i2s_bus: i2s-bus {
hdmi {
hdmi_ctl: hdmi-ctl {
rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>,
<1 RK_PB1 1 &pcfg_pull_none>,
rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>,
<1 RK_PB1 1 &pcfg_pull_none>,
<1 RK_PB2 1 &pcfg_pull_none>,
<1 RK_PB3 1 &pcfg_pull_none>;
};
......
......@@ -230,14 +230,14 @@ pcfg_output_high: pcfg-output-high {
};
emmc {
emmc_reset: emmc-reset {
rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
emmc_reset: emmc-reset {
rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
gmac {
phy_rst: phy-rst {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
};
};
};
......
......@@ -382,18 +382,15 @@ eth_phy_pwr: eth-phy-pwr {
pmic {
pmic_int: pmic-int {
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO \
&pcfg_pull_up>;
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
dvs_1: dvs-1 {
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO \
&pcfg_pull_down>;
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
};
dvs_2: dvs-2 {
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO \
&pcfg_pull_down>;
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
......@@ -406,8 +403,7 @@ sdmmc_bus4: sdmmc-bus4 {
};
sdmmc_clk: sdmmc-clk {
rockchip,pins = <6 RK_PC4 1 \
&pcfg_pull_none_drv_8ma>;
rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
};
sdmmc_cmd: sdmmc-cmd {
......@@ -432,7 +428,7 @@ pwr_3g: pwr-3g {
sdio {
wifi_enable: wifi-enable {
rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment