Commit a5d204bf authored by Jesper Nilsson's avatar Jesper Nilsson

CRIS v32: Update boot/compressed/misc.c

- Shorten include paths to machine specific headers.
- Remove fill_inbuf, not defined here.
- Return __dest as value from memcpy.
- Enable serial port hardware transmitter and receiver in serial_setup.
- Correct baudrate divisor calculation, changed from 4800 to 115200.
- Add support for Artpec-3 specific serial port setup.
- Initialize pinmux for the correct serial port.
parent 247c3c95
/*
* misc.c
*
* $Id: misc.c,v 1.8 2005/04/24 18:34:29 starvik Exp $
*
* This is a collection of several routines from gzip-1.0.3
* adapted for Linux.
*
......@@ -22,9 +20,13 @@
#include <linux/types.h>
#include <asm/arch/hwregs/reg_rdwr.h>
#include <asm/arch/hwregs/reg_map.h>
#include <asm/arch/hwregs/ser_defs.h>
#include <hwregs/reg_rdwr.h>
#include <hwregs/reg_map.h>
#include <hwregs/ser_defs.h>
#include <hwregs/pinmux_defs.h>
#ifdef CONFIG_CRIS_MACH_ARTPEC3
#include <hwregs/clkgen_defs.h>
#endif
/*
* gzip declarations
......@@ -85,7 +87,6 @@ static unsigned outcnt = 0; /* bytes in output buffer */
# define Tracecv(c,x)
#endif
static int fill_inbuf(void);
static void flush_window(void);
static void error(char *m);
static void gzip_mark(void **);
......@@ -186,6 +187,8 @@ memset(void* s, int c, size_t n)
char *ss = (char*)s;
for (i=0;i<n;i++) ss[i] = c;
return s;
}
void*
......@@ -196,6 +199,8 @@ memcpy(void* __dest, __const void* __src,
char *d = (char *)__dest, *s = (char *)__src;
for (i=0;i<__n;i++) d[i] = s[i];
return __dest;
}
/* ===========================================================================
......@@ -225,15 +230,15 @@ flush_window()
static void
error(char *x)
{
puts("\n\n");
puts("\r\n\n");
puts(x);
puts("\n\n -- System halted\n");
puts("\r\n\n -- System halted\n");
while(1); /* Halt */
}
void
setup_normal_output_buffer()
setup_normal_output_buffer(void)
{
output_data = (char *)KERNEL_LOAD_ADR;
}
......@@ -262,15 +267,17 @@ serial_setup(reg_scope_instances regi_ser)
rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div);
tr_ctrl.stop_bits = 1; /* 2 stop bits. */
tr_ctrl.en = 1; /* enable transmitter */
rec_ctrl.en = 1; /* enabler receiver */
/*
* The baudrate setup is a bit fishy, but in the end the transceiver is
* set to 4800 and the receiver to 115200. The magic value is
* 29.493 MHz.
* The baudrate setup used to be a bit fishy, but now transmitter and
* receiver are both set to the intended baud rate, 115200.
* The magic value is 29.493 MHz.
*/
tr_ctrl.base_freq = regk_ser_f29_493;
rec_ctrl.base_freq = regk_ser_f29_493;
tr_baud.div = (29493000 / 8) / 4800;
tr_baud.div = (29493000 / 8) / 115200;
rec_baud.div = (29493000 / 8) / 115200;
REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
......@@ -280,25 +287,52 @@ serial_setup(reg_scope_instances regi_ser)
}
void
decompress_kernel()
decompress_kernel(void)
{
char revision;
/* input_data is set in head.S */
inbuf = input_data;
#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
defined(CONFIG_ETRAX_DEBUG_PORT2) || \
defined(CONFIG_ETRAX_DEBUG_PORT3)
reg_pinmux_rw_hwprot hwprot;
#ifdef CONFIG_CRIS_MACH_ARTPEC3
reg_clkgen_rw_clk_ctrl clk_ctrl;
/* Enable corresponding clock region when serial 1..3 selected */
clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes;
REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl);
#endif
/* pinmux setup for ports 1..3 */
hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT0
serial_setup(regi_ser0);
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
hwprot.ser1 = regk_pinmux_yes;
serial_setup(regi_ser1);
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
hwprot.ser2 = regk_pinmux_yes;
serial_setup(regi_ser2);
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
hwprot.ser3 = regk_pinmux_yes;
serial_setup(regi_ser3);
#endif
#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
defined(CONFIG_ETRAX_DEBUG_PORT2) || \
defined(CONFIG_ETRAX_DEBUG_PORT3)
REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
#endif
/* input_data is set in head.S */
inbuf = input_data;
setup_normal_output_buffer();
......@@ -307,11 +341,11 @@ decompress_kernel()
__asm__ volatile ("move $vr,%0" : "=rm" (revision));
if (revision < 32)
{
puts("You need an ETRAX FS to run Linux 2.6/crisv32.\n");
puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
while(1);
}
puts("Uncompressing Linux...\n");
puts("Uncompressing Linux...\r\n");
gunzip();
puts("Done. Now booting the kernel.\n");
puts("Done. Now booting the kernel.\r\n");
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment