Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next

Freescale updates from Scott:

"Highlights include 8xx optimizations, some more work on datapath device
tree content, e300 machine check support, t1040 corenet error reporting,
and various cleanups and fixes."

Documentation/devicetree/bindings/powerpc/fsl/fman.txt

@@ -7,6 +7,7 @@ CONTENTS
   - FMan MURAM Node
   - FMan dTSEC/XGEC/mEMAC Node
   - FMan IEEE 1588 Node
+  - FMan MDIO Node
   - Example
 
 =============================================================================
@@ -356,6 +357,69 @@ ptp-timer@fe000 {
 	reg = <0xfe000 0x1000>;
 };
 
+=============================================================================
+FMan MDIO Node
+
+DESCRIPTION
+
+The MDIO is a bus to which the PHY devices are connected.
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: A standard property.
+		Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
+		Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
+		Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
+		FMan v3.
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+
+- bus-frequency
+		Usage: optional
+		Value type: <u32>
+		Definition: Specifies the external MDIO bus clock speed to
+		be used, if different from the standard 2.5 MHz.
+		This may be due to the standard speed being unsupported (e.g.
+		due to a hardware problem), or to advertise that all relevant
+		components in the system support a faster speed.
+
+- interrupts
+		Usage: required for external MDIO
+		Value type: <prop-encoded-array>
+		Definition: Event interrupt of external MDIO controller.
+
+- fsl,fman-internal-mdio
+		Usage: required for internal MDIO
+		Value type: boolean
+		Definition: Fman has internal MDIO for internal PCS(Physical
+		Coding Sublayer) PHYs and external MDIO for external PHYs.
+		The settings and programming routines for internal/external
+		MDIO are different. Must be included for internal MDIO.
+
+EXAMPLE
+
+Example for FMan v2 external MDIO:
+
+mdio@f1000 {
+	compatible = "fsl,fman-xmdio";
+	reg = <0xf1000 0x1000>;
+	interrupts = <101 2 0 0>;
+};
+
+Example for FMan v3 internal MDIO:
+
+mdio@f1000 {
+	compatible = "fsl,fman-memac-mdio";
+	reg = <0xf1000 0x1000>;
+	fsl,fman-internal-mdio;
+};
+
 =============================================================================
 Example
 
@@ -531,4 +595,10 @@ fman@400000 {
 		compatible = "fsl,fman-ptp-timer";
 		reg = <0xfe000 0x1000>;
 	};
+
+	mdio@f1000 {
+		compatible = "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+		interrupts = <101 2 0 0>;
+	};
 };

Documentation/devicetree/bindings/soc/fsl/bman.txt

@@ -36,6 +36,11 @@ are located at offsets 0xbf8 and 0xbfc
 	Value type:	<prop-encoded-array>
 	Definition:	Standard property. The error interrupt
 
+- fsl,bman-portals
+	Usage:		Required
+	Value type:	<phandle>
+	Definition:	Phandle to this BMan instance's portals
+
 - fsl,liodn
 	Usage:		See pamu.txt
 	Value type:	<prop-encoded-array>
@@ -96,7 +101,7 @@ The example below shows a BMan FBPR dynamic allocation memory node
 
 		bman_fbpr: bman-fbpr {
 			compatible = "fsl,bman-fbpr";
-			alloc-ranges = <0 0 0xf 0xffffffff>;
+			alloc-ranges = <0 0 0x10 0>;
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};
@@ -104,6 +109,10 @@ The example below shows a BMan FBPR dynamic allocation memory node
 
 The example below shows a (P4080) BMan CCSR-space node
 
+	bportals: bman-portals@ff4000000 {
+		...
+	};
+
 	crypto@300000 {
 		...
 		fsl,bman = <&bman, 2>;
@@ -115,6 +124,7 @@ The example below shows a (P4080) BMan CCSR-space node
 		reg = <0x31a000 0x1000>;
 		interrupts = <16 2 1 2>;
 		fsl,liodn = <0x17>;
+		fsl,bman-portals = <&bportals>;
 		memory-region = <&bman_fbpr>;
 	};
 

Documentation/devicetree/bindings/soc/fsl/qman.txt

@@ -38,6 +38,11 @@ are located at offsets 0xbf8 and 0xbfc
 	Value type:	<prop-encoded-array>
 	Definition:	Standard property. The error interrupt
 
+- fsl,qman-portals
+	Usage:		Required
+	Value type:	<phandle>
+	Definition:	Phandle to this QMan instance's portals
+
 - fsl,liodn
 	Usage:		See pamu.txt
 	Value type:	<prop-encoded-array>
@@ -113,13 +118,13 @@ The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
 
 		qman_fqd: qman-fqd {
 			compatible = "fsl,qman-fqd";
-			alloc-ranges = <0 0 0xf 0xffffffff>;
+			alloc-ranges = <0 0 0x10 0>;
 			size = <0 0x400000>;
 			alignment = <0 0x400000>;
 		};
 		qman_pfdr: qman-pfdr {
 			compatible = "fsl,qman-pfdr";
-			alloc-ranges = <0 0 0xf 0xffffffff>;
+			alloc-ranges = <0 0 0x10 0>;
 			size = <0 0x2000000>;
 			alignment = <0 0x2000000>;
 		};
@@ -127,6 +132,10 @@ The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
 
 The example below shows a (P4080) QMan CCSR-space node
 
+	qportals: qman-portals@ff4200000 {
+		...
+	};
+
 	clockgen: global-utilities@e1000 {
 		...
 		sysclk: sysclk {
@@ -154,6 +163,7 @@ The example below shows a (P4080) QMan CCSR-space node
 		reg = <0x318000 0x1000>;
 		interrupts = <16 2 1 3>
 		fsl,liodn = <0x16>;
+		fsl,qman-portals = <&qportals>;
 		memory-region = <&qman_fqd &qman_pfdr>;
 		clocks = <&platform_pll 1>;
 	};

arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi

@@ -50,6 +50,7 @@ ethernet@b0000 {
 	fsl,num_tx_queues = <0x8>;
 	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
 
 	queue-group@b0000 {
 		#address-cells = <1>;

arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi

@@ -50,6 +50,7 @@ ethernet@b1000 {
 	fsl,num_tx_queues = <0x8>;
 	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
 
 	queue-group@b1000 {
 		#address-cells = <1>;

arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi

@@ -49,6 +49,7 @@ ethernet@b2000 {
 	fsl,num_tx_queues = <0x8>;
 	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
 
 	queue-group@b2000 {
 		#address-cells = <1>;

arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi

 /*
- * PQ3 GPIO device tree stub [ controller @ offset 0xf000 ]
+ * PQ3 GPIO device tree stub [ controller @ offset 0xfc00 ]
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -32,10 +32,10 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-gpio-controller@f000 {
+gpio-controller@fc00 {
 	#gpio-cells = <2>;
 	compatible = "fsl,pq3-gpio";
-	reg = <0xf000 0x100>;
+	reg = <0xfc00 0x100>;
 	interrupts = <47 0x2 0 0>;
 	gpio-controller;
 };

arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi

+/*
+ * QorIQ BMan Portal device tree stub for 10 portals
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x100000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x101000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x102000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x103000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x104000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x105000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+	bman-portal@18000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x18000 0x4000>, <0x106000 0x1000>;
+		interrupts = <117 2 0 0>;
+	};
+	bman-portal@1c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x1c000 0x4000>, <0x107000 0x1000>;
+		interrupts = <119 2 0 0>;
+	};
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x108000 0x1000>;
+		interrupts = <121 2 0 0>;
+	};
+	bman-portal@24000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x24000 0x4000>, <0x109000 0x1000>;
+		interrupts = <123 2 0 0>;
+	};
+};

arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi

+/*
+ * QorIQ BMan device tree stub [ controller @ offset 0x31a000 ]
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+bman: bman@31a000 {
+	compatible = "fsl,bman";
+	reg = <0x31a000 0x1000>;
+	interrupts = <16 2 1 2>;
+	fsl,bman-portals = <&bportals>;
+	memory-region = <&bman_fbpr>;
+};

arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi

+/*
+ * QorIQ QMan Portal device tree stub for 10 portals & 15 pool channels
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&qportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x100000 0x1000>;
+		interrupts = <104 2 0 0>;
+		fsl,qman-channel-id = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x101000 0x1000>;
+		interrupts = <106 2 0 0>;
+		fsl,qman-channel-id = <1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x102000 0x1000>;
+		interrupts = <108 2 0 0>;
+		fsl,qman-channel-id = <2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x103000 0x1000>;
+		interrupts = <110 2 0 0>;
+		fsl,qman-channel-id = <3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x104000 0x1000>;
+		interrupts = <112 2 0 0>;
+		fsl,qman-channel-id = <4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x105000 0x1000>;
+		interrupts = <114 2 0 0>;
+		fsl,qman-channel-id = <5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x106000 0x1000>;
+		interrupts = <116 2 0 0>;
+		fsl,qman-channel-id = <6>;
+	};
+
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x107000 0x1000>;
+		interrupts = <118 2 0 0>;
+		fsl,qman-channel-id = <7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x108000 0x1000>;
+		interrupts = <120 2 0 0>;
+		fsl,qman-channel-id = <8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x109000 0x1000>;
+		interrupts = <122 2 0 0>;
+		fsl,qman-channel-id = <9>;
+	};
+};

arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi

+/*
+ * QorIQ QMan device tree stub [ controller @ offset 0x318000 ]
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+qman: qman@318000 {
+	compatible = "fsl,qman";
+	reg = <0x318000 0x1000>;
+	interrupts = <16 2 1 3>;
+	fsl,qman-portals = <&qportals>;
+	memory-region = <&qman_fqd &qman_pfdr>;
+};

arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi

+/*
+ * QorIQ QMan rev3 device tree stub [ controller @ offset 0x318000 ]
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+qman: qman@318000 {
+	compatible = "fsl,qman";
+	reg = <0x318000 0x2000>;
+	interrupts = <16 2 1 3>;
+	fsl,qman-portals = <&qportals>;
+	memory-region = <&qman_fqd &qman_pfdr>;
+};

arch/powerpc/boot/dts/mvme2500.dts

+/*
+ * Device tree source for the Emerson/Artesyn MVME2500
+ *
+ * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: P2020 DS Device Tree Source
+ * Copyright 2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+	model = "MVME2500";
+	compatible = "artesyn,MVME2500";
+
+	aliases {
+		serial2 = &serial2;
+		serial3 = &serial3;
+		serial4 = &serial4;
+		serial5 = &serial5;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0 0xffe00000 0x100000>;
+
+		i2c@3000 {
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+				interrupts = <8 1 0 0>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c512";
+				reg = <0x52>;
+			};
+
+			eeprom@53 {
+				compatible = "atmel,24c512";
+				reg = <0x53>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+
+		};
+
+		spi0: spi@7000 {
+			fsl,espi-num-chipselects = <2>;
+
+			flash@0 {
+				compatible = "atmel,at25df641";
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+			};
+			flash@1 {
+				compatible = "atmel,at25df641";
+				reg = <1>;
+				spi-max-frequency = <10000000>;
+			};
+		};
+
+		usb@22000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@24520 {
+			phy1: ethernet-phy@1 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <6 1 0 0>;
+				reg = <0x1>;
+			};
+
+			phy2: ethernet-phy@2 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <6 1 0 0>;
+				reg = <0x2>;
+			};
+
+			phy3: ethernet-phy@3 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <5 1 0 0>;
+				reg = <0x3>;
+			};
+
+			phy7: ethernet-phy@7 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <7 1 0 0>;
+				reg = <0x7>;
+			};
+
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy7>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xfff00000 0x00080000
+			  0x1 0x0 0x0 0xffc40000 0x00010000
+			  0x2 0x0 0x0 0xffc50000 0x00010000
+			  0x3 0x0 0x0 0xffc60000 0x00010000
+			  0x4 0x0 0x0 0xffc70000 0x00010000
+			  0x6 0x0 0x0 0xffc80000 0x00010000
+			  0x5 0x0 0x0 0xffdf0000 0x00008000>;
+
+		serial2: serial@1,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x1 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 2 0 0>;
+		};
+
+		serial3: serial@2,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x2 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <1 2 0 0>;
+		};
+
+		serial4: serial@3,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x3 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <2 2 0 0>;
+		};
+
+		serial5: serial@4,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <3 2 0 0>;
+		};
+
+		mram@0,0 {
+			compatible = "everspin,mram", "mtd-ram";
+			reg = <0x0 0x0 0x80000>;
+			bank-width = <2>;
+		};
+
+		board-control@5,0 {
+			compatible = "artesyn,mvme2500-fpga";
+			reg = <0x5 0x0 0x01000>;
+		};
+
+		cpld@6,0 {
+			compatible = "artesyn,mvme2500-cpld";
+			reg = <0x6 0x0 0x10000>;
+			interrupts = <9 1 0 0>;
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+
+	};
+
+	pci2: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/include/ "fsl/p2020si-post.dtsi"
+
+/ {
+	soc@ffe00000 {
+		serial@4600 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		sdhc@2e000 {
+			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+			non-removable;
+		};
+
+	};
+
+};

arch/powerpc/boot/dts/t4240emu.dts

-/*
- * T4240 emulator Device Tree Source
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "fsl/e6500_power_isa.dtsi"
-/ {
-	compatible = "fsl,T4240";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		dma0 = &dma0;
-		dma1 = &dma1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e6500@0 {
-			device_type = "cpu";
-			reg = <0 1>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu1: PowerPC,e6500@2 {
-			device_type = "cpu";
-			reg = <2 3>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu2: PowerPC,e6500@4 {
-			device_type = "cpu";
-			reg = <4 5>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu3: PowerPC,e6500@6 {
-			device_type = "cpu";
-			reg = <6 7>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-
-		cpu4: PowerPC,e6500@8 {
-			device_type = "cpu";
-			reg = <8 9>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu5: PowerPC,e6500@10 {
-			device_type = "cpu";
-			reg = <10 11>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu6: PowerPC,e6500@12 {
-			device_type = "cpu";
-			reg = <12 13>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu7: PowerPC,e6500@14 {
-			device_type = "cpu";
-			reg = <14 15>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-
-		cpu8: PowerPC,e6500@16 {
-			device_type = "cpu";
-			reg = <16 17>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-		cpu9: PowerPC,e6500@18 {
-			device_type = "cpu";
-			reg = <18 19>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-		cpu10: PowerPC,e6500@20 {
-			device_type = "cpu";
-			reg = <20 21>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-		cpu11: PowerPC,e6500@22 {
-			device_type = "cpu";
-			reg = <22 23>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-	};
-};
-
-/ {
-	model = "fsl,T4240QDS";
-	compatible = "fsl,T4240EMU", "fsl,T4240QDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	ifc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x2000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xff800000 0x00010000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-
-	};
-};
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
-	interrupts = <25 2 0 0>;
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 29>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <32>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
-
-	ddr2: memory-controller@9000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0x9000 0x1000>;
-		interrupts = <16 2 1 22>;
-	};
-
-	ddr3: memory-controller@a000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0xa000 0x1000>;
-		interrupts = <16 2 1 21>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,t4240-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000
-		       0x11000 0x1000
-		       0x12000 0x1000>;
-		interrupts = <16 2 1 27
-			      16 2 1 26
-			      16 2 1 25>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 31>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible = "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x6000>;
-		fsl,portid-mapping = <0x8000>;
-		interrupts = <
-			24 2 0 0
-			16 2 1 30>;
-	};
-
-/include/ "fsl/qoriq-mpic.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		fsl,liodn-bits = <12>;
-	};
-
-/include/ "fsl/qoriq-clockgen2.dtsi"
-	global-utilities@e1000 {
-		compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
-	};
-
-/include/ "fsl/qoriq-dma-0.dtsi"
-/include/ "fsl/qoriq-dma-1.dtsi"
-
-/include/ "fsl/qoriq-i2c-0.dtsi"
-/include/ "fsl/qoriq-i2c-1.dtsi"
-/include/ "fsl/qoriq-duart-0.dtsi"
-/include/ "fsl/qoriq-duart-1.dtsi"
-
-	L2_1: l2-cache-controller@c20000 {
-		compatible = "fsl,t4240-l2-cache-controller";
-		reg = <0xc20000 0x40000>;
-		next-level-cache = <&cpc>;
-	};
-	L2_2: l2-cache-controller@c60000 {
-		compatible = "fsl,t4240-l2-cache-controller";
-		reg = <0xc60000 0x40000>;
-		next-level-cache = <&cpc>;
-	};
-	L2_3: l2-cache-controller@ca0000 {
-		compatible = "fsl,t4240-l2-cache-controller";
-		reg = <0xca0000 0x40000>;
-		next-level-cache = <&cpc>;
-	};
-};

arch/powerpc/configs/corenet32_smp_defconfig

@@ -75,6 +75,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
@@ -92,6 +93,7 @@ CONFIG_SATA_SIL=y
 CONFIG_PATA_SIL680=y
 CONFIG_NETDEVICES=y
 CONFIG_FSL_PQ_MDIO=y
+CONFIG_FSL_XGMAC_MDIO=y
 CONFIG_E1000=y
 CONFIG_E1000E=y
 CONFIG_AT803X_PHY=y

arch/powerpc/configs/corenet64_smp_defconfig

@@ -69,6 +69,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -79,7 +80,11 @@ CONFIG_SATA_FSL=y
 CONFIG_SATA_SIL24=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_FSL_XGMAC_MDIO=y
 CONFIG_E1000E=y
+CONFIG_VITESSE_PHY=y
+CONFIG_FIXED_PHY=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set

arch/powerpc/configs/mpc85xx_defconfig

@@ -42,6 +42,7 @@ CONFIG_TQM8548=y
 CONFIG_TQM8555=y
 CONFIG_TQM8560=y
 CONFIG_SBC8548=y
+CONFIG_MVME2500=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_HIGHMEM=y
@@ -49,6 +50,8 @@ CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIEASPM is not set
 CONFIG_PCI_MSI=y
 CONFIG_RAPIDIO=y
 CONFIG_NET=y
@@ -85,10 +88,14 @@ CONFIG_FTL=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
@@ -120,6 +127,7 @@ CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
+CONFIG_BROADCOM_PHY=y
 CONFIG_FIXED_PHY=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -128,8 +136,8 @@ CONFIG_INPUT_FF_MEMLESS=m
 CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
@@ -142,7 +150,8 @@ CONFIG_SPI=y
 CONFIG_SPI_FSL_SPI=y
 CONFIG_SPI_FSL_ESPI=y
 CONFIG_GPIO_MPC8XXX=y
-# CONFIG_HWMON is not set
+CONFIG_HWMON=m
+CONFIG_SENSORS_LM90=m
 CONFIG_FB=y
 CONFIG_FB_FSL_DIU=y
 # CONFIG_VGA_CONSOLE is not set
@@ -185,6 +194,7 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_DS1374=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -91,6 +91,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y

arch/powerpc/include/asm/pci-bridge.h

@@ -119,6 +119,10 @@ extern void setup_indirect_pci(struct pci_controller* hose,
 extern int indirect_read_config(struct pci_bus *bus, unsigned int devfn,
 				int offset, int len, u32 *val);
 
+extern int __indirect_read_config(struct pci_controller *hose,
+				  unsigned char bus_number, unsigned int devfn,
+				  int offset, int len, u32 *val);
+
 extern int indirect_write_config(struct pci_bus *bus, unsigned int devfn,
 				 int offset, int len, u32 val);
 

arch/powerpc/include/asm/pgtable-ppc32.h

@@ -178,12 +178,11 @@ static inline unsigned long pte_update(pte_t *p,
 	andc	%1,%0,%5\n\
 	or	%1,%1,%6\n\
 	/* 0x200 == Extended encoding, bit 22 */ \
-	/* Bit 22 has to be 1 if neither _PAGE_USER nor _PAGE_RW are set */ \
-	rlwimi	%1,%1,32-2,0x200\n /* get _PAGE_USER */ \
-	rlwinm	%3,%1,32-1,0x200\n /* get _PAGE_RW */ \
-	or	%1,%3,%1\n\
-	xori	%1,%1,0x200\n"
-"	stwcx.	%1,0,%4\n\
+	/* Bit 22 has to be 1 when _PAGE_USER is unset and _PAGE_RO is set */ \
+	rlwimi	%1,%1,32-1,0x200\n /* get _PAGE_RO */ \
+	rlwinm	%3,%1,32-2,0x200\n /* get _PAGE_USER */ \
+	andc	%1,%1,%3\n\
+	stwcx.	%1,0,%4\n\
 	bne-	1b"
 	: "=&r" (old), "=&r" (tmp), "=m" (*p), "=&r" (tmp2)
 	: "r" (p), "r" (clr), "r" (set), "m" (*p)
@@ -275,7 +274,7 @@ static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 				      pte_t *ptep)
 {
-	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), _PAGE_RO);
 }
 static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
 					   unsigned long addr, pte_t *ptep)
@@ -286,9 +285,11 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
 
 static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
 {
-	unsigned long bits = pte_val(entry) &
+	unsigned long set = pte_val(entry) &
 		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
-	pte_update(ptep, 0, bits);
+	unsigned long clr = ~pte_val(entry) & _PAGE_RO;
+
+	pte_update(ptep, clr, set);
 }
 
 #define __HAVE_ARCH_PTE_SAME
@@ -346,10 +347,14 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
 #define pte_to_pgoff(pte)	(pte_val(pte) >> 3)
 #define pgoff_to_pte(off)	((pte_t) { ((off) << 3) | _PAGE_FILE })
 
+#ifndef CONFIG_PPC_4K_PAGES
+void pgtable_cache_init(void);
+#else
 /*
  * No page table caches to initialise
  */
 #define pgtable_cache_init()	do { } while (0)
+#endif
 
 extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
 		      pmd_t **pmdp);

arch/powerpc/include/asm/pgtable.h

@@ -30,7 +30,8 @@ struct mm_struct;
 #include <asm/tlbflush.h>
 
 /* Generic accessors to PTE bits */
-static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_RW; }
+static inline int pte_write(pte_t pte)
+{	return (pte_val(pte) & (_PAGE_RW | _PAGE_RO)) != _PAGE_RO; }
 static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
 static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
@@ -115,12 +116,14 @@ static inline unsigned long pte_pfn(pte_t pte)	{
 
 /* Generic modifiers for PTE bits */
 static inline pte_t pte_wrprotect(pte_t pte) {
-	pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+	pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE);
+	pte_val(pte) |= _PAGE_RO; return pte; }
 static inline pte_t pte_mkclean(pte_t pte) {
 	pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
 static inline pte_t pte_mkold(pte_t pte) {
 	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
 static inline pte_t pte_mkwrite(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_RO;
 	pte_val(pte) |= _PAGE_RW; return pte; }
 static inline pte_t pte_mkdirty(pte_t pte) {
 	pte_val(pte) |= _PAGE_DIRTY; return pte; }

arch/powerpc/include/asm/pte-8xx.h

@@ -46,9 +46,9 @@
  * require a TLB exception handler change.  It is assumed unused bits
  * are always zero.
  */
-#define _PAGE_RW	0x0400	/* lsb PP bits, inverted in HW */
+#define _PAGE_RO	0x0400	/* lsb PP bits */
 #define _PAGE_USER	0x0800	/* msb PP bits */
-/* set when neither _PAGE_USER nor _PAGE_RW are set */
+/* set when _PAGE_USER is unset and _PAGE_RO is set */
 #define _PAGE_KNLRO	0x0200
 
 #define _PMD_PRESENT	0x0001
@@ -62,9 +62,8 @@
 #define PTE_ATOMIC_UPDATES	1
 
 /* We need to add _PAGE_SHARED to kernel pages */
-#define _PAGE_KERNEL_RO	(_PAGE_SHARED | _PAGE_KNLRO)
-#define _PAGE_KERNEL_ROX	(_PAGE_EXEC | _PAGE_KNLRO)
-#define _PAGE_KERNEL_RW	(_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE)
+#define _PAGE_KERNEL_RO	(_PAGE_SHARED | _PAGE_RO | _PAGE_KNLRO)
+#define _PAGE_KERNEL_ROX	(_PAGE_EXEC | _PAGE_RO | _PAGE_KNLRO)
 
 #endif /* __KERNEL__ */
 #endif /*  _ASM_POWERPC_PTE_8xx_H */

arch/powerpc/include/asm/pte-common.h

@@ -34,6 +34,12 @@
 #ifndef _PAGE_PSIZE
 #define _PAGE_PSIZE		0
 #endif
+/* _PAGE_RO and _PAGE_RW shall not be defined at the same time */
+#ifndef _PAGE_RO
+#define _PAGE_RO 0
+#else
+#define _PAGE_RW 0
+#endif
 #ifndef _PMD_PRESENT_MASK
 #define _PMD_PRESENT_MASK	_PMD_PRESENT
 #endif
@@ -42,10 +48,10 @@
 #define PMD_PAGE_SIZE(pmd)	bad_call_to_PMD_PAGE_SIZE()
 #endif
 #ifndef _PAGE_KERNEL_RO
-#define _PAGE_KERNEL_RO		0
+#define _PAGE_KERNEL_RO		(_PAGE_RO)
 #endif
 #ifndef _PAGE_KERNEL_ROX
-#define _PAGE_KERNEL_ROX	(_PAGE_EXEC)
+#define _PAGE_KERNEL_ROX	(_PAGE_EXEC | _PAGE_RO)
 #endif
 #ifndef _PAGE_KERNEL_RW
 #define _PAGE_KERNEL_RW		(_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE)
@@ -95,7 +101,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 /* Mask of bits returned by pte_pgprot() */
 #define PAGE_PROT_BITS	(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
 			 _PAGE_WRITETHRU | _PAGE_ENDIAN | _PAGE_4K_PFN | \
-			 _PAGE_USER | _PAGE_ACCESSED | \
+			 _PAGE_USER | _PAGE_ACCESSED | _PAGE_RO | \
 			 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | _PAGE_EXEC)
 
 #ifdef CONFIG_NUMA_BALANCING
@@ -128,11 +134,14 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
  */
 #define PAGE_NONE	__pgprot(_PAGE_BASE)
 #define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
-#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
-#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | \
+				 _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RO)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RO | \
+				 _PAGE_EXEC)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RO)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RO | \
+				 _PAGE_EXEC)
 
 #define __P000	PAGE_NONE
 #define __P001	PAGE_READONLY

arch/powerpc/kernel/cputable.c

@@ -1133,6 +1133,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_603,
+		.machine_check		= machine_check_generic,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e300",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,

arch/powerpc/kernel/head_8xx.S

@@ -319,36 +319,29 @@ InstructionTLBMiss:
 	 * pin the first 8MB of kernel memory */
 	andis.	r11, r10, 0x8000	/* Address >= 0x80000000 */
 #endif
-	mfspr	r11, SPRN_M_TW	/* Get level 1 table base address */
+	mfspr	r11, SPRN_M_TW	/* Get level 1 table */
 #ifdef CONFIG_MODULES
 	beq	3f
-	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@h
-	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
+	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 3:
 #endif
-	/* Extract level 1 index */
-	rlwinm	r10, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
-	lwzx	r11, r10, r11	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, don't try to find a pte */
-
-	/* We have a pte table, so load the MI_TWC with the attributes
-	 * for this "segment."
-	 */
+	/* Insert level 1 index */
+	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
+	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
+
+	/* Load the MI_TWC with the attributes for this "segment." */
 	MTSPR_CPU6(SPRN_MI_TWC, r11, r3)	/* Set segment attributes */
-	mfspr	r11, SPRN_SRR0	/* Get effective address of fault */
+	rlwinm	r11, r11,0,0,19	/* Extract page descriptor page address */
 	/* Extract level 2 index */
-	rlwinm	r11, r11, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
+	rlwinm	r10, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
 	lwzx	r10, r10, r11	/* Get the pte */
 
 #ifdef CONFIG_SWAP
-	andi.	r11, r10, _PAGE_ACCESSED | _PAGE_PRESENT
-	cmpwi	cr0, r11, _PAGE_ACCESSED | _PAGE_PRESENT
-	li	r11, RPN_PATTERN
-	bne-	cr0, 2f
-#else
-	li	r11, RPN_PATTERN
+	rlwinm	r11, r10, 32-5, _PAGE_PRESENT
+	and	r11, r11, r10
+	rlwimi	r10, r11, 0, _PAGE_PRESENT
 #endif
+	li	r11, RPN_PATTERN
 	/* The Linux PTE won't go exactly into the MMU TLB.
 	 * Software indicator bits 21 and 28 must be clear.
 	 * Software indicator bits 24, 25, 26, and 27 must be
@@ -366,21 +359,6 @@ InstructionTLBMiss:
 	mfspr	r10, SPRN_SPRG_SCRATCH2
 	EXCEPTION_EPILOG_0
 	rfi
-2:
-	mfspr	r10, SPRN_SRR1
-	/* clear all error bits as TLB Miss
-	 * sets a few unconditionally
-	*/
-	rlwinm	r10, r10, 0, 0xffff
-	mtspr	SPRN_SRR1, r10
-
-	/* Restore registers */
-#ifdef CONFIG_8xx_CPU6
-	mfspr	r3, SPRN_DAR
-	mtspr	SPRN_DAR, r11	/* Tag DAR */
-#endif
-	mfspr	r10, SPRN_SPRG_SCRATCH2
-	b	InstructionTLBError1
 
 	. = 0x1200
 DataStoreTLBMiss:
@@ -395,20 +373,16 @@ DataStoreTLBMiss:
 	 * kernel page tables.
 	 */
 	andis.	r11, r10, 0x8000
-	mfspr	r11, SPRN_M_TW	/* Get level 1 table base address */
+	mfspr	r11, SPRN_M_TW	/* Get level 1 table */
 	beq	3f
-	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@h
-	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
+	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 3:
-	/* Extract level 1 index */
-	rlwinm	r10, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
-	lwzx	r11, r10, r11	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, don't try to find a pte */
+	/* Insert level 1 index */
+	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
+	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
 
 	/* We have a pte table, so load fetch the pte from the table.
 	 */
-	mfspr	r10, SPRN_MD_EPN	/* Get address of fault */
 	/* Extract level 2 index */
 	rlwinm	r10, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
 	rlwimi	r10, r11, 0, 0, 32 - PAGE_SHIFT - 1	/* Add level 2 base */
@@ -441,16 +415,13 @@ DataStoreTLBMiss:
 	and	r11, r11, r10
 	rlwimi	r10, r11, 0, _PAGE_PRESENT
 #endif
-	/* invert RW */
-	xori	r10, r10, _PAGE_RW
-
 	/* The Linux PTE won't go exactly into the MMU TLB.
 	 * Software indicator bits 22 and 28 must be clear.
 	 * Software indicator bits 24, 25, 26, and 27 must be
 	 * set.  All other Linux PTE bits control the behavior
 	 * of the MMU.
 	 */
-2:	li	r11, RPN_PATTERN
+	li	r11, RPN_PATTERN
 	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
 	MTSPR_CPU6(SPRN_MD_RPN, r10, r3)	/* Update TLB entry */
 
@@ -469,10 +440,7 @@ DataStoreTLBMiss:
  */
 	. = 0x1300
 InstructionTLBError:
-	EXCEPTION_PROLOG_0
-InstructionTLBError1:
-	EXCEPTION_PROLOG_1
-	EXCEPTION_PROLOG_2
+	EXCEPTION_PROLOG
 	mr	r4,r12
 	mr	r5,r9
 	andis.	r10,r5,0x4000
@@ -532,30 +500,21 @@ DARFixed:/* Return from dcbx instruction bug workaround */
  /* define if you don't want to use self modifying code */
 #define NO_SELF_MODIFYING_CODE
 FixupDAR:/* Entry point for dcbx workaround. */
-#ifdef CONFIG_8xx_CPU6
-	mtspr	SPRN_DAR, r3
-#endif
 	mtspr	SPRN_SPRG_SCRATCH2, r10
 	/* fetch instruction from memory. */
 	mfspr	r10, SPRN_SRR0
 	andis.	r11, r10, 0x8000	/* Address >= 0x80000000 */
-	mfspr	r11, SPRN_M_TW	/* Get level 1 table base address */
-	beq-	3f		/* Branch if user space */
-	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@h
-	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
-	/* Extract level 1 index */
-3:	rlwinm	r10, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
-	lwzx	r11, r10, r11	/* Get the level 1 entry */
-	rlwinm	r10, r11,0,0,19	/* Extract page descriptor page address */
-	mfspr	r11, SPRN_SRR0	/* Get effective address of fault */
-	/* Extract level 2 index */
-	rlwinm	r11, r11, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
-	lwzx	r11, r10, r11	/* Get the pte */
-#ifdef CONFIG_8xx_CPU6
-	mfspr	r3, SPRN_DAR
-#endif
+	mfspr	r11, SPRN_M_TW	/* Get level 1 table */
+	beq	3f
+	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
+	/* Insert level 1 index */
+3:	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
+	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
+	rlwinm	r11, r11,0,0,19	/* Extract page descriptor page address */
+	/* Insert level 2 index */
+	rlwimi	r11, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
+	lwz	r11, 0(r11)	/* Get the pte */
 	/* concat physical page address(r11) and page offset(r10) */
-	mfspr	r10, SPRN_SRR0
 	rlwimi	r11, r10, 0, 32 - PAGE_SHIFT, 31
 	lwz	r11,0(r11)
 /* Check if it really is a dcbx instruction. */
@@ -705,8 +664,7 @@ start_here:
 	 * init's THREAD like the context switch code does, but this is
 	 * easier......until someone changes init's static structures.
 	 */
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
+	lis	r6, swapper_pg_dir@ha
 	tophys(r6,r6)
 #ifdef CONFIG_8xx_CPU6
 	lis	r4, cpu6_errata_word@h
@@ -885,23 +843,28 @@ _GLOBAL(set_context)
 	stw	r4, 0x4(r5)
 #endif
 
+	/* Register M_TW will contain base address of level 1 table minus the
+	 * lower part of the kernel PGDIR base address, so that all accesses to
+	 * level 1 table are done relative to lower part of kernel PGDIR base
+	 * address.
+	 */
+	li	r5, (swapper_pg_dir-PAGE_OFFSET)@l
+	sub	r4, r4, r5
+	tophys	(r4, r4)
 #ifdef CONFIG_8xx_CPU6
 	lis	r6, cpu6_errata_word@h
 	ori	r6, r6, cpu6_errata_word@l
-	tophys	(r4, r4)
 	li	r7, 0x3f80
 	stw	r7, 12(r6)
 	lwz	r7, 12(r6)
-        mtspr   SPRN_M_TW, r4               /* Update MMU base address */
+#endif
+	mtspr	SPRN_M_TW, r4		/* Update pointeur to level 1 table */
+#ifdef CONFIG_8xx_CPU6
 	li	r7, 0x3380
 	stw	r7, 12(r6)
 	lwz	r7, 12(r6)
-        mtspr   SPRN_M_CASID, r3             /* Update context */
-#else
-        mtspr   SPRN_M_CASID,r3		/* Update context */
-	tophys	(r4, r4)
-	mtspr	SPRN_M_TW, r4		/* and pgd */
 #endif
+	mtspr	SPRN_M_CASID, r3	/* Update context */
 	SYNC
 	blr
 

arch/powerpc/mm/fsl_booke_mmu.c

@@ -67,8 +67,6 @@ struct tlbcamrange {
 	phys_addr_t phys;
 } tlbcam_addrs[NUM_TLBCAMS];
 
-extern unsigned int tlbcam_index;
-
 unsigned long tlbcam_sz(int idx)
 {
 	return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1;

arch/powerpc/mm/mmu_context_nohash.c

@@ -52,12 +52,15 @@
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
 
+#include "mmu_decl.h"
+
 static unsigned int first_context, last_context;
 static unsigned int next_context, nr_free_contexts;
 static unsigned long *context_map;
 static unsigned long *stale_map[NR_CPUS];
 static struct mm_struct **context_mm;
 static DEFINE_RAW_SPINLOCK(context_lock);
+static bool no_selective_tlbil;
 
 #define CTX_MAP_SIZE	\
 	(sizeof(unsigned long) * (last_context / BITS_PER_LONG + 1))
@@ -133,6 +136,38 @@ static unsigned int steal_context_smp(unsigned int id)
 }
 #endif  /* CONFIG_SMP */
 
+static unsigned int steal_all_contexts(void)
+{
+	struct mm_struct *mm;
+	int cpu = smp_processor_id();
+	unsigned int id;
+
+	for (id = first_context; id <= last_context; id++) {
+		/* Pick up the victim mm */
+		mm = context_mm[id];
+
+		pr_hardcont(" | steal %d from 0x%p", id, mm);
+
+		/* Mark this mm as having no context anymore */
+		mm->context.id = MMU_NO_CONTEXT;
+		if (id != first_context) {
+			context_mm[id] = NULL;
+			__clear_bit(id, context_map);
+#ifdef DEBUG_MAP_CONSISTENCY
+			mm->context.active = 0;
+#endif
+		}
+		__clear_bit(id, stale_map[cpu]);
+	}
+
+	/* Flush the TLB for all contexts (not to be used on SMP) */
+	_tlbil_all();
+
+	nr_free_contexts = last_context - first_context;
+
+	return first_context;
+}
+
 /* Note that this will also be called on SMP if all other CPUs are
  * offlined, which means that it may be called for cpu != 0. For
  * this to work, we somewhat assume that CPUs that are onlined
@@ -241,7 +276,10 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 			goto stolen;
 		}
 #endif /* CONFIG_SMP */
-		id = steal_context_up(id);
+		if (no_selective_tlbil)
+			id = steal_all_contexts();
+		else
+			id = steal_context_up(id);
 		goto stolen;
 	}
 	nr_free_contexts--;
@@ -407,12 +445,15 @@ void __init mmu_context_init(void)
 	if (mmu_has_feature(MMU_FTR_TYPE_8xx)) {
 		first_context = 0;
 		last_context = 15;
+		no_selective_tlbil = true;
 	} else if (mmu_has_feature(MMU_FTR_TYPE_47x)) {
 		first_context = 1;
 		last_context = 65535;
+		no_selective_tlbil = false;
 	} else {
 		first_context = 1;
 		last_context = 255;
+		no_selective_tlbil = false;
 	}
 
 #ifdef DEBUG_CLAMP_LAST_CONTEXT

arch/powerpc/mm/pgtable_32.c

@@ -63,7 +63,6 @@ void setbat(int index, unsigned long virt, phys_addr_t phys,
 #endif /* HAVE_BATS */
 
 #ifdef HAVE_TLBCAM
-extern unsigned int tlbcam_index;
 extern phys_addr_t v_mapped_by_tlbcam(unsigned long va);
 extern unsigned long p_mapped_by_tlbcam(phys_addr_t pa);
 #else /* !HAVE_TLBCAM */
@@ -73,13 +72,25 @@ extern unsigned long p_mapped_by_tlbcam(phys_addr_t pa);
 
 #define PGDIR_ORDER	(32 + PGD_T_LOG2 - PGDIR_SHIFT)
 
+#ifndef CONFIG_PPC_4K_PAGES
+static struct kmem_cache *pgtable_cache;
+
+void pgtable_cache_init(void)
+{
+	pgtable_cache = kmem_cache_create("PGDIR cache", 1 << PGDIR_ORDER,
+					  1 << PGDIR_ORDER, 0, NULL);
+	if (pgtable_cache == NULL)
+		panic("Couldn't allocate pgtable caches");
+}
+#endif
+
 pgd_t *pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *ret;
 
 	/* pgdir take page or two with 4K pages and a page fraction otherwise */
 #ifndef CONFIG_PPC_4K_PAGES
-	ret = kzalloc(1 << PGDIR_ORDER, GFP_KERNEL);
+	ret = kmem_cache_alloc(pgtable_cache, GFP_KERNEL | __GFP_ZERO);
 #else
 	ret = (pgd_t *)__get_free_pages(GFP_KERNEL|__GFP_ZERO,
 			PGDIR_ORDER - PAGE_SHIFT);
@@ -90,7 +101,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
 #ifndef CONFIG_PPC_4K_PAGES
-	kfree((void *)pgd);
+	kmem_cache_free(pgtable_cache, (void *)pgd);
 #else
 	free_pages((unsigned long)pgd, PGDIR_ORDER - PAGE_SHIFT);
 #endif
@@ -147,7 +158,7 @@ void __iomem *
 ioremap_prot(phys_addr_t addr, unsigned long size, unsigned long flags)
 {
 	/* writeable implies dirty for kernel addresses */
-	if (flags & _PAGE_RW)
+	if ((flags & (_PAGE_RW | _PAGE_RO)) != _PAGE_RO)
 		flags |= _PAGE_DIRTY | _PAGE_HWWRITE;
 
 	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */

arch/powerpc/mm/tlb_nohash.c

@@ -284,8 +284,11 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
 	struct cpumask *cpu_mask;
 	unsigned int pid;
 
+	if (unlikely(!mm))
+		return;
+
 	preempt_disable();
-	pid = mm ? mm->context.id : 0;
+	pid = mm->context.id;
 	if (unlikely(pid == MMU_NO_CONTEXT))
 		goto bail;
 	cpu_mask = mm_cpumask(mm);

arch/powerpc/perf/core-fsl-emb.c

@@ -330,9 +330,11 @@ static int fsl_emb_pmu_add(struct perf_event *event, int flags)
 	}
 	local64_set(&event->hw.prev_count, val);
 
-	if (!(flags & PERF_EF_START)) {
+	if (unlikely(!(flags & PERF_EF_START))) {
 		event->hw.state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
 		val = 0;
+	} else {
+		event->hw.state &= ~(PERF_HES_STOPPED | PERF_HES_UPTODATE);
 	}
 
 	write_pmc(i, val);
@@ -389,6 +391,7 @@ static void fsl_emb_pmu_del(struct perf_event *event, int flags)
 static void fsl_emb_pmu_start(struct perf_event *event, int ef_flags)
 {
 	unsigned long flags;
+	unsigned long val;
 	s64 left;
 
 	if (event->hw.idx < 0 || !event->hw.sample_period)
@@ -405,7 +408,10 @@ static void fsl_emb_pmu_start(struct perf_event *event, int ef_flags)
 
 	event->hw.state = 0;
 	left = local64_read(&event->hw.period_left);
-	write_pmc(event->hw.idx, left);
+	val = 0;
+	if (left < 0x80000000L)
+		val = 0x80000000L - left;
+	write_pmc(event->hw.idx, val);
 
 	perf_event_update_userpage(event);
 	perf_pmu_enable(event->pmu);

arch/powerpc/platforms/83xx/usb.c

@@ -162,8 +162,7 @@ int mpc831x_usb_cfg(void)
 
 	iounmap(immap);
 
-	if (immr_node)
-		of_node_put(immr_node);
+	of_node_put(immr_node);
 
 	/* Map USB SOC space */
 	ret = of_address_to_resource(np, 0, &res);

arch/powerpc/platforms/85xx/Kconfig

@@ -241,6 +241,12 @@ config SGY_CTS1000
 	help
 	  Enable this to support functionality in Servergy's CTS-1000 systems.
 
+config MVME2500
+	bool "Artesyn MVME2500"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the Emerson/Artesyn MVME2500 board.
+
 endif # PPC32
 
 config PPC_QEMU_E500

arch/powerpc/platforms/85xx/Makefile

@@ -31,3 +31,4 @@ obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
 obj-$(CONFIG_GE_IMP3A)	  += ge_imp3a.o
 obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o
 obj-$(CONFIG_SGY_CTS1000) += sgy_cts1000.o
+obj-$(CONFIG_MVME2500)	  += mvme2500.o

arch/powerpc/platforms/85xx/mvme2500.c

+/*
+ * Board setup routines for the Emerson/Artesyn MVME2500
+ *
+ * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * Based on earlier code by:
+ *
+ *	Xianghua Xiao (x.xiao@freescale.com)
+ *	Tom Armistead (tom.armistead@emerson.com)
+ *	Copyright 2012 Emerson
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Author Alessio Igor Bogani <alessio.bogani@elettra.eu>
+ *
+ */
+
+#include <linux/pci.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc85xx.h"
+
+void __init mvme2500_pic_init(void)
+{
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+		  MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU,
+		0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init mvme2500_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("mvme2500_setup_arch()", 0);
+	fsl_pci_assign_primary();
+	pr_info("MVME2500 board from Artesyn\n");
+}
+
+machine_arch_initcall(mvme2500, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mvme2500_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "artesyn,MVME2500");
+}
+
+define_machine(mvme2500) {
+	.name			= "MVME2500",
+	.probe			= mvme2500_probe,
+	.setup_arch		= mvme2500_setup_arch,
+	.init_IRQ		= mvme2500_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};

arch/powerpc/sysdev/fsl_pci.c

@@ -68,13 +68,10 @@ static int fsl_pcie_check_link(struct pci_controller *hose)
 	u32 val = 0;
 
 	if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) {
-		if (hose->ops->read == fsl_indirect_read_config) {
-			struct pci_bus bus;
-			bus.number = hose->first_busno;
-			bus.sysdata = hose;
-			bus.ops = hose->ops;
-			indirect_read_config(&bus, 0, PCIE_LTSSM, 4, &val);
-		} else
+		if (hose->ops->read == fsl_indirect_read_config)
+			__indirect_read_config(hose, hose->first_busno, 0,
+					       PCIE_LTSSM, 4, &val);
+		else
 			early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
 		if (val < PCIE_LTSSM_L0)
 			return 1;

arch/powerpc/sysdev/indirect_pci.c

@@ -20,31 +20,31 @@
 #include <asm/pci-bridge.h>
 #include <asm/machdep.h>
 
-int indirect_read_config(struct pci_bus *bus, unsigned int devfn,
-			 int offset, int len, u32 *val)
+int __indirect_read_config(struct pci_controller *hose,
+			   unsigned char bus_number, unsigned int devfn,
+			   int offset, int len, u32 *val)
 {
-	struct pci_controller *hose = pci_bus_to_host(bus);
 	volatile void __iomem *cfg_data;
 	u8 cfg_type = 0;
 	u32 bus_no, reg;
 
 	if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) {
-		if (bus->number != hose->first_busno)
+		if (bus_number != hose->first_busno)
 			return PCIBIOS_DEVICE_NOT_FOUND;
 		if (devfn != 0)
 			return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 
 	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
+		if (ppc_md.pci_exclude_device(hose, bus_number, devfn))
 			return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (hose->indirect_type & PPC_INDIRECT_TYPE_SET_CFG_TYPE)
-		if (bus->number != hose->first_busno)
+		if (bus_number != hose->first_busno)
 			cfg_type = 1;
 
-	bus_no = (bus->number == hose->first_busno) ?
-			hose->self_busno : bus->number;
+	bus_no = (bus_number == hose->first_busno) ?
+			hose->self_busno : bus_number;
 
 	if (hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG)
 		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
@@ -77,6 +77,15 @@ int indirect_read_config(struct pci_bus *bus, unsigned int devfn,
 	return PCIBIOS_SUCCESSFUL;
 }
 
+int indirect_read_config(struct pci_bus *bus, unsigned int devfn,
+			 int offset, int len, u32 *val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+
+	return __indirect_read_config(hose, bus->number, devfn, offset, len,
+				      val);
+}
+
 int indirect_write_config(struct pci_bus *bus, unsigned int devfn,
 			  int offset, int len, u32 val)
 {

arch/powerpc/sysdev/qe_lib/qe.c

@@ -497,7 +497,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
 	 * saved microcode information and put in the new.
 	 */
 	memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
-	strcpy(qe_firmware_info.id, firmware->id);
+	strlcpy(qe_firmware_info.id, firmware->id, sizeof(qe_firmware_info.id));
 	qe_firmware_info.extended_modes = firmware->extended_modes;
 	memcpy(qe_firmware_info.vtraps, firmware->vtraps,
 		sizeof(firmware->vtraps));
@@ -583,8 +583,8 @@ struct qe_firmware_info *qe_get_firmware_info(void)
 	/* Copy the data into qe_firmware_info*/
 	sprop = of_get_property(fw, "id", NULL);
 	if (sprop)
-		strncpy(qe_firmware_info.id, sprop,
-			sizeof(qe_firmware_info.id) - 1);
+		strlcpy(qe_firmware_info.id, sprop,
+			sizeof(qe_firmware_info.id));
 
 	prop = of_find_property(fw, "extended-modes", NULL);
 	if (prop && (prop->length == sizeof(u64))) {

drivers/memory/fsl-corenet-cf.c

@@ -27,18 +27,29 @@ enum ccf_version {
 struct ccf_info {
 	enum ccf_version version;
 	int err_reg_offs;
+	bool has_brr;
 };
 
 static const struct ccf_info ccf1_info = {
 	.version = CCF1,
 	.err_reg_offs = 0xa00,
+	.has_brr = false,
 };
 
 static const struct ccf_info ccf2_info = {
 	.version = CCF2,
 	.err_reg_offs = 0xe40,
+	.has_brr = true,
 };
 
+/*
+ * This register is present but not documented, with different values for
+ * IP_ID, on other chips with fsl,corenet2-cf such as t4240 and b4860.
+ */
+#define CCF_BRR			0xbf8
+#define CCF_BRR_IPID		0xffff0000
+#define CCF_BRR_IPID_T1040	0x09310000
+
 static const struct of_device_id ccf_matches[] = {
 	{
 		.compatible = "fsl,corenet1-cf",
@@ -66,6 +77,8 @@ struct ccf_err_regs {
 /* LAE/CV also valid for errdis and errinten */
 #define ERRDET_LAE		(1 << 0)  /* Local Access Error */
 #define ERRDET_CV		(1 << 1)  /* Coherency Violation */
+#define ERRDET_UTID		(1 << 2)  /* Unavailable Target ID (t1040) */
+#define ERRDET_MCST		(1 << 3)  /* Multicast Stash (t1040) */
 #define ERRDET_CTYPE_SHIFT	26	  /* Capture Type (ccf2 only) */
 #define ERRDET_CTYPE_MASK	(0x1f << ERRDET_CTYPE_SHIFT)
 #define ERRDET_CAP		(1 << 31) /* Capture Valid (ccf2 only) */
@@ -84,6 +97,7 @@ struct ccf_private {
 	struct device *dev;
 	void __iomem *regs;
 	struct ccf_err_regs __iomem *err_regs;
+	bool t1040;
 };
 
 static irqreturn_t ccf_irq(int irq, void *dev_id)
@@ -142,6 +156,12 @@ static irqreturn_t ccf_irq(int irq, void *dev_id)
 	if (errdet & ERRDET_CV)
 		dev_crit(ccf->dev, "Coherency Violation\n");
 
+	if (errdet & ERRDET_UTID)
+		dev_crit(ccf->dev, "Unavailable Target ID\n");
+
+	if (errdet & ERRDET_MCST)
+		dev_crit(ccf->dev, "Multicast Stash\n");
+
 	if (cap_valid) {
 		dev_crit(ccf->dev, "address 0x%09llx, src id 0x%x\n",
 			 addr, src_id);
@@ -157,6 +177,7 @@ static int ccf_probe(struct platform_device *pdev)
 	struct ccf_private *ccf;
 	struct resource *r;
 	const struct of_device_id *match;
+	u32 errinten;
 	int ret, irq;
 
 	match = of_match_device(ccf_matches, &pdev->dev);
@@ -183,6 +204,13 @@ static int ccf_probe(struct platform_device *pdev)
 	ccf->info = match->data;
 	ccf->err_regs = ccf->regs + ccf->info->err_reg_offs;
 
+	if (ccf->info->has_brr) {
+		u32 brr = ioread32be(ccf->regs + CCF_BRR);
+
+		if ((brr & CCF_BRR_IPID) == CCF_BRR_IPID_T1040)
+			ccf->t1040 = true;
+	}
+
 	dev_set_drvdata(&pdev->dev, ccf);
 
 	irq = platform_get_irq(pdev, 0);
@@ -197,15 +225,19 @@ static int ccf_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	errinten = ERRDET_LAE | ERRDET_CV;
+	if (ccf->t1040)
+		errinten |= ERRDET_UTID | ERRDET_MCST;
+
 	switch (ccf->info->version) {
 	case CCF1:
 		/* On CCF1 this register enables rather than disables. */
-		iowrite32be(ERRDET_LAE | ERRDET_CV, &ccf->err_regs->errdis);
+		iowrite32be(errinten, &ccf->err_regs->errdis);
 		break;
 
 	case CCF2:
 		iowrite32be(0, &ccf->err_regs->errdis);
-		iowrite32be(ERRDET_LAE | ERRDET_CV, &ccf->err_regs->errinten);
+		iowrite32be(errinten, &ccf->err_regs->errinten);
 		break;
 	}