Commit a6558c2d authored by Simon Horman's avatar Simon Horman Committed by Paul Mundt

mmc, ARM: Rename SuperH Mobile ARM zboot helpers

These headers and helpers will also be used for SDHI boot
so the mmcif name will start to make a lot less sense.
Signed-off-by: default avatarSimon Horman <horms@verge.net.au>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent 05a5f01c
......@@ -10,7 +10,7 @@
*/
#include <linux/mmc/sh_mmcif.h>
#include <mach/mmcif.h>
#include <mach/mmc.h>
#define MMCIF_BASE (void __iomem *)0xe6bd0000
......@@ -41,8 +41,8 @@
*/
asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
{
mmcif_init_progress();
mmcif_update_progress(MMCIF_PROGRESS_ENTER);
mmc_init_progress();
mmc_update_progress(MMCIF_PROGRESS_ENTER);
/* Initialise MMC
* registers: PORT84CR-PORT92CR
......@@ -68,12 +68,12 @@ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
/* Enable clock to MMC hardware block */
__raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
mmcif_update_progress(MMCIF_PROGRESS_INIT);
mmc_update_progress(MMCIF_PROGRESS_INIT);
/* setup MMCIF hardware */
sh_mmcif_boot_init(MMCIF_BASE);
mmcif_update_progress(MMCIF_PROGRESS_LOAD);
mmc_update_progress(MMCIF_PROGRESS_LOAD);
/* load kernel via MMCIF interface */
sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
......@@ -83,5 +83,5 @@ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
/* Disable clock to MMC hardware block */
__raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3);
mmcif_update_progress(MMCIF_PROGRESS_DONE);
mmc_update_progress(MMCIF_PROGRESS_DONE);
}
#ifndef MMCIF_AP4EB_H
#define MMCIF_AP4EB_H
#ifndef MMC_AP4EB_H
#define MMC_AP4EB_H
#define PORT185CR (void __iomem *)0xe60520b9
#define PORT186CR (void __iomem *)0xe60520ba
......@@ -8,7 +8,7 @@
#define PORTR191_160DR (void __iomem *)0xe6056014
static inline void mmcif_init_progress(void)
static inline void mmc_init_progress(void)
{
/* Initialise LEDS1-4
* registers: PORT185CR-PORT188CR (LED1-LED4 Control)
......@@ -20,10 +20,10 @@ static inline void mmcif_init_progress(void)
__raw_writeb(0x10, PORT188CR);
}
static inline void mmcif_update_progress(int n)
static inline void mmc_update_progress(int n)
{
__raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) |
(1 << (25 + n)), PORTR191_160DR);
}
#endif /* MMCIF_AP4EB_H */
#endif /* MMC_AP4EB_H */
#ifndef MMCIF_MACKEREL_H
#define MMCIF_MACKEREL_H
#ifndef MMC_MACKEREL_H
#define MMC_MACKEREL_H
#define PORT0CR (void __iomem *)0xe6051000
#define PORT1CR (void __iomem *)0xe6051001
......@@ -9,7 +9,7 @@
#define PORTR031_000DR (void __iomem *)0xe6055000
#define PORTL159_128DR (void __iomem *)0xe6054010
static inline void mmcif_init_progress(void)
static inline void mmc_init_progress(void)
{
/* Initialise LEDS0-3
* registers: PORT0CR-PORT2CR,PORT159CR (LED0-LED3 Control)
......@@ -21,7 +21,7 @@ static inline void mmcif_init_progress(void)
__raw_writeb(0x10, PORT159CR);
}
static inline void mmcif_update_progress(int n)
static inline void mmc_update_progress(int n)
{
unsigned a = 0, b = 0;
......@@ -35,5 +35,4 @@ static inline void mmcif_update_progress(int n)
__raw_writel((__raw_readl(PORTL159_128DR) & ~(1 << 31)) | b,
PORTL159_128DR);
}
#endif /* MMCIF_MACKEREL_H */
#endif /* MMC_MACKEREL_H */
#ifndef MMCIF_H
#define MMCIF_H
#ifndef MMC_H
#define MMC_H
/**************************************************
*
......@@ -8,11 +8,11 @@
**************************************************/
#ifdef CONFIG_MACH_AP4EVB
#include "mach/mmcif-ap4eb.h"
#include "mach/mmc-ap4eb.h"
#elif CONFIG_MACH_MACKEREL
#include "mach/mmcif-mackerel.h"
#include "mach/mmc-mackerel.h"
#else
#error "unsupported board."
#endif
#endif /* MMCIF_H */
#endif /* MMC_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment