rtlwifi: rtl8723ae: Remove all instances of DBG_EMERG

This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c

@@ -99,8 +99,7 @@ static void _rtl8723e_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
 	while (!bwrite_sucess) {
 		wait_writeh2c_limmit--;
 		if (wait_writeh2c_limmit == 0) {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Write H2C fail because no trigger for FW INT!\n");
+			pr_err("Write H2C fail because no trigger for FW INT!\n");
 			break;
 		}
 
@@ -123,8 +122,8 @@ static void _rtl8723e_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
 			box_extreg = REG_HMEBOX_EXT_3;
 			break;
 		default:
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "switch case %#x not processed\n", boxnum);
+			pr_err("switch case %#x not processed\n",
+			       boxnum);
 			break;
 		}
 
@@ -229,8 +228,8 @@ static void _rtl8723e_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
 			}
 			break;
 		default:
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "switch case %#x not processed\n", cmd_len);
+			pr_err("switch case %#x not processed\n",
+			       cmd_len);
 			break;
 		}
 

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c

@@ -570,9 +570,8 @@ static bool _rtl8723e_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
 			break;
 
 		if (count > POLLING_LLT_THRESHOLD) {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Failed to polling write LLT done at address %d!\n",
-				 address);
+			pr_err("Failed to polling write LLT done at address %d!\n",
+			       address);
 			status = false;
 			break;
 		}
@@ -961,7 +960,7 @@ int rtl8723e_hw_init(struct ieee80211_hw *hw)
 	rtlpriv->intf_ops->disable_aspm(hw);
 	rtstatus = _rtl8712e_init_mac(hw);
 	if (rtstatus != true) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+		pr_err("Init MAC failed\n");
 		err = 1;
 		goto exit;
 	}
@@ -1107,8 +1106,7 @@ static enum version_8723e _rtl8723e_read_chip_version(struct ieee80211_hw *hw)
 			 "Chip Version ID: VERSION_NORMAL_UMC_CHIP_8723_1T1R_B_CUT.\n");
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Chip Version ID: Unknown. Bug?\n");
+		pr_err("Chip Version ID: Unknown. Bug?\n");
 		break;
 	}
 
@@ -1157,8 +1155,7 @@ static int _rtl8723e_set_media_status(struct ieee80211_hw *hw,
 			"Set Network type to AP!\n");
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			"Network type %d not support!\n", type);
+		pr_err("Network type %d not support!\n", type);
 		return 1;
 		break;
 	}
@@ -1852,7 +1849,7 @@ void rtl8723e_read_eeprom_info(struct ieee80211_hw *hw)
 	} else {
 		rtlefuse->autoload_failflag = true;
 		_rtl8723e_read_adapter_info(hw, false);
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+		pr_err("Autoload ERR!!\n");
 	}
 	_rtl8723e_hal_customized_behavior(hw);
 }
@@ -2245,9 +2242,7 @@ void rtl8723e_set_key(struct ieee80211_hw *hw, u32 key_index,
 					entry_id =
 					  rtl_cam_get_free_entry(hw, p_macaddr);
 					if (entry_id >=  TOTAL_CAM_ENTRY) {
-						RT_TRACE(rtlpriv, COMP_SEC,
-							 DBG_EMERG,
-							 "Can not find free hw security cam entry\n");
+						pr_err("Can not find free hw security cam entry\n");
 						return;
 					}
 				} else {

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c

@@ -58,8 +58,8 @@ void rtl8723e_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
 		rtl_write_byte(rtlpriv, REG_LEDCFG1, ledcfg & 0x10);
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case %#x not processed\n", pled->ledpin);
+		pr_err("switch case %#x not processed\n",
+		       pled->ledpin);
 		break;
 	}
 	pled->ledon = true;
@@ -100,8 +100,8 @@ void rtl8723e_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
 
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case %#x not processed\n", pled->ledpin);
+		pr_err("switch case %#x not processed\n",
+		       pled->ledpin);
 		break;
 	}
 	pled->ledon = false;

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c

@@ -213,7 +213,7 @@ static bool _rtl8723e_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
 	rtstatus = _rtl8723e_phy_config_bb_with_headerfile(hw,
 						BASEBAND_CONFIG_PHY_REG);
 	if (rtstatus != true) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+		pr_err("Write BB Reg Fail!!\n");
 		return false;
 	}
 
@@ -227,13 +227,13 @@ static bool _rtl8723e_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
 					BASEBAND_CONFIG_PHY_REG);
 	}
 	if (rtstatus != true) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+		pr_err("BB_PG Reg Fail!!\n");
 		return false;
 	}
 	rtstatus =
 	  _rtl8723e_phy_config_bb_with_headerfile(hw, BASEBAND_CONFIG_AGC_TAB);
 	if (rtstatus != true) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+		pr_err("AGC Table Fail\n");
 		return false;
 	}
 	rtlphy->cck_high_power = (bool) (rtl_get_bbreg(hw,
@@ -749,8 +749,7 @@ void rtl8723e_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
 						      (u8 *)&iotype);
 			break;
 		default:
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Unknown Scan Backup operation.\n");
+			pr_err("Unknown Scan Backup operation.\n");
 			break;
 		}
 	}
@@ -791,8 +790,8 @@ void rtl8723e_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
 		rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+		pr_err("unknown bandwidth: %#X\n",
+		       rtlphy->current_chan_bw);
 		break;
 	}
 
@@ -816,8 +815,8 @@ void rtl8723e_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
 			       HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+		pr_err("unknown bandwidth: %#X\n",
+		       rtlphy->current_chan_bw);
 		break;
 	}
 	rtl8723e_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -977,8 +976,8 @@ static bool _rtl8723e_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
 			currentcmd = &postcommoncmd[*step];
 			break;
 		default:
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Invalid 'stage' = %d, Check it!\n", *stage);
+			pr_err("Invalid 'stage' = %d, Check it!\n",
+			       *stage);
 			return true;
 		}
 

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c

@@ -51,8 +51,7 @@ void rtl8723e_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
 			      rtlphy->rfreg_chnlval[0]);
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "unknown bandwidth: %#X\n", bandwidth);
+		pr_err("unknown bandwidth: %#X\n", bandwidth);
 		break;
 	}
 }

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c

@@ -172,8 +172,7 @@ int rtl8723e_init_sw_vars(struct ieee80211_hw *hw)
 	/* for firmware buf */
 	rtlpriv->rtlhal.pfirmware = vzalloc(0x6000);
 	if (!rtlpriv->rtlhal.pfirmware) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Can't alloc buffer for fw.\n");
+		pr_err("Can't alloc buffer for fw.\n");
 		return 1;
 	}
 
@@ -186,8 +185,7 @@ int rtl8723e_init_sw_vars(struct ieee80211_hw *hw)
 				      rtlpriv->io.dev, GFP_KERNEL, hw,
 				      rtl_fw_cb);
 	if (err) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Failed to request firmware!\n");
+		pr_err("Failed to request firmware!\n");
 		return 1;
 	}
 	return 0;
@@ -270,7 +268,7 @@ static struct rtl_mod_params rtl8723e_mod_params = {
 	.inactiveps = true,
 	.swctrl_lps = false,
 	.fwctrl_lps = true,
-	.debug = DBG_EMERG,
+	.debug = 0,
 	.msi_support = false,
 	.disable_watchdog = false,
 };