[ARM] pxa/aspenite: add support for debug ethernet

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

arch/arm/mach-mmp/aspenite.c

@@ -11,26 +11,89 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/addr-map.h>
 #include <mach/mfp-pxa168.h>
 #include <mach/pxa168.h>
+#include <mach/gpio.h>
 
 #include "common.h"
 
 static unsigned long common_pin_config[] __initdata = {
+	/* Data Flash Interface */
+	GPIO0_DFI_D15,
+	GPIO1_DFI_D14,
+	GPIO2_DFI_D13,
+	GPIO3_DFI_D12,
+	GPIO4_DFI_D11,
+	GPIO5_DFI_D10,
+	GPIO6_DFI_D9,
+	GPIO7_DFI_D8,
+	GPIO8_DFI_D7,
+	GPIO9_DFI_D6,
+	GPIO10_DFI_D5,
+	GPIO11_DFI_D4,
+	GPIO12_DFI_D3,
+	GPIO13_DFI_D2,
+	GPIO14_DFI_D1,
+	GPIO15_DFI_D0,
+
+	/* Static Memory Controller */
+	GPIO18_SMC_nCS0,
+	GPIO34_SMC_nCS1,
+	GPIO23_SMC_nLUA,
+	GPIO25_SMC_nLLA,
+	GPIO28_SMC_RDY,
+	GPIO29_SMC_SCLK,
+	GPIO35_SMC_BE1,
+	GPIO36_SMC_BE2,
+	GPIO27_GPIO,	/* Ethernet IRQ */
+
 	/* UART1 */
 	GPIO107_UART1_RXD,
 	GPIO108_UART1_TXD,
 };
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= SMC_CS1_PHYS_BASE + 0x300,
+		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(27),
+		.end	= gpio_to_irq(27),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
+	/* on-chip devices */
 	pxa168_add_uart(1);
+
+	/* off-chip devices */
+	platform_device_register(&smc91x_device);
 }
 
 MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")

drivers/net/smc91x.h

@@ -44,6 +44,7 @@
     defined(CONFIG_MACH_MAINSTONE) ||\
     defined(CONFIG_MACH_ZYLONITE) ||\
     defined(CONFIG_MACH_LITTLETON) ||\
+    defined(CONFIG_MACH_ZYLONITE2) ||\
     defined(CONFIG_ARCH_VIPER)
 
 #include <asm/mach-types.h>