Merge tag 'mmc-merge-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.6:

  Core:
   - Rename cd-gpio to slot-gpio and extend it to support more slot GPIO
     functions, such as write-protect.
   - Add a function to get regulators (Vdd and Vccq) for a host.

  Drivers:
   - sdhci-pxav2, sdhci-pxav3: Add device tree support.
   - sdhi: Add device tree support.
   - sh_mmcif: Add support for regulators, device tree, slot-gpio.
   - tmio: Add regulator support, use slot-gpio."

* tag 'mmc-merge-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (62 commits)
  mmc: sdhci-dove: Prepare for common clock framework
  mmc: sdhci-dove: Add SDHCI_QUIRK_NO_HISPD_BIT
  mmc: omap_hsmmc: ensure probe returns error upon resource failure
  mmc: mxs-mmc: Add wp-inverted property
  mmc: esdhc: Fix DMA_MASK to not break mx25 DMA access
  mmc: core: reset signal voltage on power up
  mmc: sd: Fix sd current limit setting
  mmc: omap_hsmmc: add clk_prepare and clk_unprepare
  mmc: sdhci: When a UHS switch fails, cycle power if regulator is used
  mmc: atmel-mci: modify CLKDIV displaying in debugfs
  mmc: atmel-mci: fix incorrect setting of host->data to NULL
  mmc: sdhci: poll for card even when card is logically unremovable
  mmc: sdhci: Introduce new flag SDHCI_USING_RETUNING_TIMER
  mmc: sdio: Change pr_warning to pr_warn_ratelimited
  mmc: core: Simplify and fix for SD switch processing
  mmc: sdhci: restore host settings when card is removed
  mmc: sdhci: fix incorrect command used in tuning
  mmc: sdhci-pci: CaFe has broken card detection
  mmc: sdhci: Report failure reasons for all cases in sdhci_add_host()
  mmc: s3cmci: Convert s3cmci driver to gpiolib API
  ...

Documentation/devicetree/bindings/mmc/fsl-esdhc.txt

@@ -3,21 +3,22 @@
 The Enhanced Secure Digital Host Controller provides an interface
 for MMC, SD, and SDIO types of memory cards.
 
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the sdhci-esdhc driver.
+
 Required properties:
-  - compatible : should be
-    "fsl,<chip>-esdhc", "fsl,esdhc"
-  - reg : should contain eSDHC registers location and length.
-  - interrupts : should contain eSDHC interrupt.
   - interrupt-parent : interrupt source phandle.
   - clock-frequency : specifies eSDHC base clock frequency.
-  - sdhci,wp-inverted : (optional) specifies that eSDHC controller
-    reports inverted write-protect state; New devices should use
-    the generic "wp-inverted" property.
-  - sdhci,1-bit-only : (optional) specifies that a controller can
-    only handle 1-bit data transfers. New devices should use the
-    generic "bus-width = <1>" property.
-  - sdhci,auto-cmd12: (optional) specifies that a controller can
-    only handle auto CMD12.
+
+Optional properties:
+  - sdhci,wp-inverted : specifies that eSDHC controller reports
+    inverted write-protect state; New devices should use the generic
+    "wp-inverted" property.
+  - sdhci,1-bit-only : specifies that a controller can only handle
+    1-bit data transfers. New devices should use the generic
+    "bus-width = <1>" property.
+  - sdhci,auto-cmd12: specifies that a controller can only handle auto
+    CMD12.
 
 Example:
 

Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt

@@ -3,17 +3,15 @@
 The Enhanced Secure Digital Host Controller on Freescale i.MX family
 provides an interface for MMC, SD, and SDIO types of memory cards.
 
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the sdhci-esdhc-imx driver.
+
 Required properties:
 - compatible : Should be "fsl,<chip>-esdhc"
-- reg : Should contain eSDHC registers location and length
-- interrupts : Should contain eSDHC interrupt
 
 Optional properties:
-- non-removable : Indicate the card is wired to host permanently
 - fsl,cd-internal : Indicate to use controller internal card detection
 - fsl,wp-internal : Indicate to use controller internal write protection
-- cd-gpios : Specify GPIOs for card detection
-- wp-gpios : Specify GPIOs for write protection
 
 Examples:
 

Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt

 MMC/SD/SDIO slot directly connected to a SPI bus
 
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the mmc_spi driver.
+
 Required properties:
-- compatible : should be "mmc-spi-slot".
-- reg : should specify SPI address (chip-select number).
 - spi-max-frequency : maximum frequency for this device (Hz).
 - voltage-ranges : two cells are required, first cell specifies minimum
   slot voltage (mV), second cell specifies maximum slot voltage (mV).
@@ -11,8 +12,7 @@ Required properties:
 Optional properties:
 - gpios : may specify GPIOs in this order: Card-Detect GPIO,
   Write-Protect GPIO. Note that this does not follow the
-  binding from mmc.txt, for historic reasons.
-- interrupts : the interrupt of a card detect interrupt.
+  binding from mmc.txt, for historical reasons.
 - interrupt-parent : the phandle for the interrupt controller that
   services interrupts for this device.
 

Documentation/devicetree/bindings/mmc/mmc.txt

@@ -2,13 +2,17 @@ These properties are common to multiple MMC host controllers. Any host
 that requires the respective functionality should implement them using
 these definitions.
 
+Interpreted by the OF core:
+- reg: Registers location and length.
+- interrupts: Interrupts used by the MMC controller.
+
 Required properties:
 - bus-width: Number of data lines, can be <1>, <4>, or <8>
 
 Optional properties:
-- cd-gpios : Specify GPIOs for card detection, see gpio binding
-- wp-gpios : Specify GPIOs for write protection, see gpio binding
-- cd-inverted: when present, polarity on the wp gpio line is inverted
+- cd-gpios: Specify GPIOs for card detection, see gpio binding
+- wp-gpios: Specify GPIOs for write protection, see gpio binding
+- cd-inverted: when present, polarity on the cd gpio line is inverted
 - wp-inverted: when present, polarity on the wp gpio line is inverted
 - non-removable: non-removable slot (like eMMC)
 - max-frequency: maximum operating clock frequency

Documentation/devicetree/bindings/mmc/mmci.txt

 * ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1
 
-The ARM PrimeCell MMCI PL180 and PL181 provides and interface for
+The ARM PrimeCell MMCI PL180 and PL181 provides an interface for
 reading and writing to MultiMedia and SD cards alike.
 
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the mmci driver.
+
 Required properties:
 - compatible             : contains "arm,pl18x", "arm,primecell".
-- reg                    : contains pl18x registers and length.
-- interrupts             : contains the device IRQ(s).
 - arm,primecell-periphid : contains the PrimeCell Peripheral ID.
 
 Optional properties:
-- wp-gpios               : contains any write protect (ro) gpios
-- cd-gpios               : contains any card detection gpios
-- cd-inverted            : indicates whether the cd gpio is inverted
-- max-frequency          : contains the maximum operating frequency
-- bus-width              : number of data lines, can be <1>, <4>, or <8>
 - mmc-cap-mmc-highspeed  : indicates whether MMC is high speed capable
 - mmc-cap-sd-highspeed   : indicates whether SD is high speed capable

Documentation/devicetree/bindings/mmc/mxs-mmc.txt

@@ -3,16 +3,14 @@
 The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
 to support MMC, SD, and SDIO types of memory cards.
 
+This file documents differences between the core properties in mmc.txt
+and the properties used by the mxsmmc driver.
+
 Required properties:
 - compatible: Should be "fsl,<chip>-mmc".  The supported chips include
   imx23 and imx28.
-- reg: Should contain registers location and length
 - interrupts: Should contain ERROR and DMA interrupts
 - fsl,ssp-dma-channel: APBH DMA channel for the SSP
-- bus-width: Number of data lines, can be <1>, <4>, or <8>
-
-Optional properties:
-- wp-gpios: Specify GPIOs for write protection
 
 Examples:
 

Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt

@@ -3,15 +3,13 @@
 This controller on Tegra family SoCs provides an interface for MMC, SD,
 and SDIO types of memory cards.
 
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the sdhci-tegra driver.
+
 Required properties:
 - compatible : Should be "nvidia,<chip>-sdhci"
-- reg : Should contain SD/MMC registers location and length
-- interrupts : Should contain SD/MMC interrupt
-- bus-width : Number of data lines, can be <1>, <4>, or <8>
 
 Optional properties:
-- cd-gpios : Specify GPIOs for card detection
-- wp-gpios : Specify GPIOs for write protection
 - power-gpios : Specify GPIOs for power control
 
 Example:

Documentation/devicetree/bindings/mmc/sdhci-pxa.txt

+* Marvell sdhci-pxa v2/v3 controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
+
+Required properties:
+- compatible: Should be "mrvl,pxav2-mmc" or "mrvl,pxav3-mmc".
+
+Optional properties:
+- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
+
+Example:
+
+sdhci@d4280800 {
+	compatible = "mrvl,pxav3-mmc";
+	reg = <0xd4280800 0x800>;
+	bus-width = <8>;
+	interrupts = <27>;
+	non-removable;
+	mrvl,clk-delay-cycles = <31>;
+};

Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt

@@ -3,21 +3,20 @@
 The Highspeed MMC Host Controller on TI OMAP family
 provides an interface for MMC, SD, and SDIO types of memory cards.
 
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap_hsmmc driver.
+
 Required properties:
 - compatible:
  Should be "ti,omap2-hsmmc", for OMAP2 controllers
  Should be "ti,omap3-hsmmc", for OMAP3 controllers
  Should be "ti,omap4-hsmmc", for OMAP4 controllers
 - ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
-- reg : should contain hsmmc registers location and length
 
 Optional properties:
 ti,dual-volt: boolean, supports dual voltage cards
 <supply-name>-supply: phandle to the regulator device tree node
 "supply-name" examples are "vmmc", "vmmc_aux" etc
-bus-width: Number of data lines, default assumed is 1 if the property is missing.
-cd-gpios: GPIOs for card detection
-wp-gpios: GPIOs for write protection
 ti,non-removable: non-removable slot (like eMMC)
 ti,needs-special-reset: Requires a special softreset sequence
 

drivers/mmc/card/block.c

@@ -850,9 +850,7 @@ static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
 		goto retry;
 	if (!err)
 		mmc_blk_reset_success(md, type);
-	spin_lock_irq(&md->lock);
-	__blk_end_request(req, err, blk_rq_bytes(req));
-	spin_unlock_irq(&md->lock);
+	blk_end_request(req, err, blk_rq_bytes(req));
 
 	return err ? 0 : 1;
 }
@@ -934,9 +932,7 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq,
 	if (!err)
 		mmc_blk_reset_success(md, type);
 out:
-	spin_lock_irq(&md->lock);
-	__blk_end_request(req, err, blk_rq_bytes(req));
-	spin_unlock_irq(&md->lock);
+	blk_end_request(req, err, blk_rq_bytes(req));
 
 	return err ? 0 : 1;
 }
@@ -951,9 +947,7 @@ static int mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req)
 	if (ret)
 		ret = -EIO;
 
-	spin_lock_irq(&md->lock);
-	__blk_end_request_all(req, ret);
-	spin_unlock_irq(&md->lock);
+	blk_end_request_all(req, ret);
 
 	return ret ? 0 : 1;
 }
@@ -1252,14 +1246,10 @@ static int mmc_blk_cmd_err(struct mmc_blk_data *md, struct mmc_card *card,
 
 		blocks = mmc_sd_num_wr_blocks(card);
 		if (blocks != (u32)-1) {
-			spin_lock_irq(&md->lock);
-			ret = __blk_end_request(req, 0, blocks << 9);
-			spin_unlock_irq(&md->lock);
+			ret = blk_end_request(req, 0, blocks << 9);
 		}
 	} else {
-		spin_lock_irq(&md->lock);
-		ret = __blk_end_request(req, 0, brq->data.bytes_xfered);
-		spin_unlock_irq(&md->lock);
+		ret = blk_end_request(req, 0, brq->data.bytes_xfered);
 	}
 	return ret;
 }
@@ -1311,10 +1301,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 			 * A block was successfully transferred.
 			 */
 			mmc_blk_reset_success(md, type);
-			spin_lock_irq(&md->lock);
-			ret = __blk_end_request(req, 0,
+			ret = blk_end_request(req, 0,
 						brq->data.bytes_xfered);
-			spin_unlock_irq(&md->lock);
 			/*
 			 * If the blk_end_request function returns non-zero even
 			 * though all data has been transferred and no errors
@@ -1364,10 +1352,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 			 * time, so we only reach here after trying to
 			 * read a single sector.
 			 */
-			spin_lock_irq(&md->lock);
-			ret = __blk_end_request(req, -EIO,
+			ret = blk_end_request(req, -EIO,
 						brq->data.blksz);
-			spin_unlock_irq(&md->lock);
 			if (!ret)
 				goto start_new_req;
 			break;
@@ -1388,12 +1374,10 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
 	return 1;
 
  cmd_abort:
-	spin_lock_irq(&md->lock);
 	if (mmc_card_removed(card))
 		req->cmd_flags |= REQ_QUIET;
 	while (ret)
-		ret = __blk_end_request(req, -EIO, blk_rq_cur_bytes(req));
-	spin_unlock_irq(&md->lock);
+		ret = blk_end_request(req, -EIO, blk_rq_cur_bytes(req));
 
  start_new_req:
 	if (rqc) {
@@ -1417,9 +1401,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 	ret = mmc_blk_part_switch(card, md);
 	if (ret) {
 		if (req) {
-			spin_lock_irq(&md->lock);
-			__blk_end_request_all(req, -EIO);
-			spin_unlock_irq(&md->lock);
+			blk_end_request_all(req, -EIO);
 		}
 		ret = 0;
 		goto out;

drivers/mmc/core/Makefile

@@ -7,6 +7,6 @@ mmc_core-y			:= core.o bus.o host.o \
 				   mmc.o mmc_ops.o sd.o sd_ops.o \
 				   sdio.o sdio_ops.o sdio_bus.o \
 				   sdio_cis.o sdio_io.o sdio_irq.o \
-				   quirks.o cd-gpio.o
+				   quirks.o slot-gpio.o
 
 mmc_core-$(CONFIG_DEBUG_FS)	+= debugfs.o

drivers/mmc/core/cd-gpio.c

-/*
- * Generic GPIO card-detect helper
- *
- * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/jiffies.h>
-#include <linux/mmc/cd-gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-struct mmc_cd_gpio {
-	unsigned int gpio;
-	char label[0];
-};
-
-static irqreturn_t mmc_cd_gpio_irqt(int irq, void *dev_id)
-{
-	/* Schedule a card detection after a debounce timeout */
-	mmc_detect_change(dev_id, msecs_to_jiffies(100));
-	return IRQ_HANDLED;
-}
-
-int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio)
-{
-	size_t len = strlen(dev_name(host->parent)) + 4;
-	struct mmc_cd_gpio *cd;
-	int irq = gpio_to_irq(gpio);
-	int ret;
-
-	if (irq < 0)
-		return irq;
-
-	cd = kmalloc(sizeof(*cd) + len, GFP_KERNEL);
-	if (!cd)
-		return -ENOMEM;
-
-	snprintf(cd->label, len, "%s cd", dev_name(host->parent));
-
-	ret = gpio_request_one(gpio, GPIOF_DIR_IN, cd->label);
-	if (ret < 0)
-		goto egpioreq;
-
-	ret = request_threaded_irq(irq, NULL, mmc_cd_gpio_irqt,
-				   IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-				   IRQF_ONESHOT, cd->label, host);
-	if (ret < 0)
-		goto eirqreq;
-
-	cd->gpio = gpio;
-	host->hotplug.irq = irq;
-	host->hotplug.handler_priv = cd;
-
-	return 0;
-
-eirqreq:
-	gpio_free(gpio);
-egpioreq:
-	kfree(cd);
-	return ret;
-}
-EXPORT_SYMBOL(mmc_cd_gpio_request);
-
-void mmc_cd_gpio_free(struct mmc_host *host)
-{
-	struct mmc_cd_gpio *cd = host->hotplug.handler_priv;
-
-	if (!cd)
-		return;
-
-	free_irq(host->hotplug.irq, host);
-	gpio_free(cd->gpio);
-	kfree(cd);
-}
-EXPORT_SYMBOL(mmc_cd_gpio_free);

drivers/mmc/core/core.c

@@ -404,6 +404,7 @@ int mmc_interrupt_hpi(struct mmc_card *card)
 {
 	int err;
 	u32 status;
+	unsigned long prg_wait;
 
 	BUG_ON(!card);
 
@@ -419,30 +420,38 @@ int mmc_interrupt_hpi(struct mmc_card *card)
 		goto out;
 	}
 
-	/*
-	 * If the card status is in PRG-state, we can send the HPI command.
-	 */
-	if (R1_CURRENT_STATE(status) == R1_STATE_PRG) {
-		do {
-			/*
-			 * We don't know when the HPI command will finish
-			 * processing, so we need to resend HPI until out
-			 * of prg-state, and keep checking the card status
-			 * with SEND_STATUS.  If a timeout error occurs when
-			 * sending the HPI command, we are already out of
-			 * prg-state.
-			 */
-			err = mmc_send_hpi_cmd(card, &status);
-			if (err)
-				pr_debug("%s: abort HPI (%d error)\n",
-					 mmc_hostname(card->host), err);
+	switch (R1_CURRENT_STATE(status)) {
+	case R1_STATE_IDLE:
+	case R1_STATE_READY:
+	case R1_STATE_STBY:
+		/*
+		 * In idle states, HPI is not needed and the caller
+		 * can issue the next intended command immediately
+		 */
+		goto out;
+	case R1_STATE_PRG:
+		break;
+	default:
+		/* In all other states, it's illegal to issue HPI */
+		pr_debug("%s: HPI cannot be sent. Card state=%d\n",
+			mmc_hostname(card->host), R1_CURRENT_STATE(status));
+		err = -EINVAL;
+		goto out;
+	}
 
-			err = mmc_send_status(card, &status);
-			if (err)
-				break;
-		} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
-	} else
-		pr_debug("%s: Left prg-state\n", mmc_hostname(card->host));
+	err = mmc_send_hpi_cmd(card, &status);
+	if (err)
+		goto out;
+
+	prg_wait = jiffies + msecs_to_jiffies(card->ext_csd.out_of_int_time);
+	do {
+		err = mmc_send_status(card, &status);
+
+		if (!err && R1_CURRENT_STATE(status) == R1_STATE_TRAN)
+			break;
+		if (time_after(jiffies, prg_wait))
+			err = -ETIMEDOUT;
+	} while (!err);
 
 out:
 	mmc_release_host(card->host);
@@ -941,7 +950,7 @@ int mmc_regulator_get_ocrmask(struct regulator *supply)
 
 	return result;
 }
-EXPORT_SYMBOL(mmc_regulator_get_ocrmask);
+EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask);
 
 /**
  * mmc_regulator_set_ocr - set regulator to match host->ios voltage
@@ -1011,7 +1020,30 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
 			"could not set regulator OCR (%d)\n", result);
 	return result;
 }
-EXPORT_SYMBOL(mmc_regulator_set_ocr);
+EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr);
+
+int mmc_regulator_get_supply(struct mmc_host *mmc)
+{
+	struct device *dev = mmc_dev(mmc);
+	struct regulator *supply;
+	int ret;
+
+	supply = devm_regulator_get(dev, "vmmc");
+	mmc->supply.vmmc = supply;
+	mmc->supply.vqmmc = devm_regulator_get(dev, "vqmmc");
+
+	if (IS_ERR(supply))
+		return PTR_ERR(supply);
+
+	ret = mmc_regulator_get_ocrmask(supply);
+	if (ret > 0)
+		mmc->ocr_avail = ret;
+	else
+		dev_warn(mmc_dev(mmc), "Failed getting OCR mask: %d\n", ret);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mmc_regulator_get_supply);
 
 #endif /* CONFIG_REGULATOR */
 
@@ -1180,6 +1212,9 @@ static void mmc_power_up(struct mmc_host *host)
 	host->ios.timing = MMC_TIMING_LEGACY;
 	mmc_set_ios(host);
 
+	/* Set signal voltage to 3.3V */
+	mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false);
+
 	/*
 	 * This delay should be sufficient to allow the power supply
 	 * to reach the minimum voltage.
@@ -1931,9 +1966,6 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
 	 */
 	mmc_hw_reset_for_init(host);
 
-	/* Initialization should be done at 3.3 V I/O voltage. */
-	mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
-
 	/*
 	 * sdio_reset sends CMD52 to reset card.  Since we do not know
 	 * if the card is being re-initialized, just send it.  CMD52
@@ -2075,6 +2107,7 @@ void mmc_rescan(struct work_struct *work)
 void mmc_start_host(struct mmc_host *host)
 {
 	host->f_init = max(freqs[0], host->f_min);
+	host->rescan_disable = 0;
 	mmc_power_up(host);
 	mmc_detect_change(host, 0);
 }
@@ -2088,6 +2121,7 @@ void mmc_stop_host(struct mmc_host *host)
 	spin_unlock_irqrestore(&host->lock, flags);
 #endif
 
+	host->rescan_disable = 1;
 	cancel_delayed_work_sync(&host->detect);
 	mmc_flush_scheduled_work();
 

drivers/mmc/core/host.c

@@ -32,6 +32,7 @@
 static void mmc_host_classdev_release(struct device *dev)
 {
 	struct mmc_host *host = cls_dev_to_mmc_host(dev);
+	mutex_destroy(&host->slot.lock);
 	kfree(host);
 }
 
@@ -312,6 +313,8 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
 	if (!host)
 		return NULL;
 
+	/* scanning will be enabled when we're ready */
+	host->rescan_disable = 1;
 	spin_lock(&mmc_host_lock);
 	err = idr_get_new(&mmc_host_idr, host, &host->index);
 	spin_unlock(&mmc_host_lock);
@@ -327,6 +330,9 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
 
 	mmc_host_clk_init(host);
 
+	mutex_init(&host->slot.lock);
+	host->slot.cd_irq = -EINVAL;
+
 	spin_lock_init(&host->lock);
 	init_waitqueue_head(&host->wq);
 	INIT_DELAYED_WORK(&host->detect, mmc_rescan);

drivers/mmc/core/mmc.c

@@ -818,9 +818,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	if (!mmc_host_is_spi(host))
 		mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN);
 
-	/* Initialization should be done at 3.3 V I/O voltage. */
-	mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
-
 	/*
 	 * Since we're changing the OCR value, we seem to
 	 * need to tell some cards to go back to the idle

drivers/mmc/core/mmc_ops.c

@@ -569,7 +569,6 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
 
 	cmd.opcode = opcode;
 	cmd.arg = card->rca << 16 | 1;
-	cmd.cmd_timeout_ms = card->ext_csd.out_of_int_time;
 
 	err = mmc_wait_for_cmd(card->host, &cmd, 0);
 	if (err) {

drivers/mmc/core/sd.c

@@ -244,7 +244,7 @@ static int mmc_read_ssr(struct mmc_card *card)
 	 * bitfield positions accordingly.
 	 */
 	au = UNSTUFF_BITS(ssr, 428 - 384, 4);
-	if (au > 0 || au <= 9) {
+	if (au > 0 && au <= 9) {
 		card->ssr.au = 1 << (au + 4);
 		es = UNSTUFF_BITS(ssr, 408 - 384, 16);
 		et = UNSTUFF_BITS(ssr, 402 - 384, 6);
@@ -290,8 +290,12 @@ static int mmc_read_switch(struct mmc_card *card)
 		return -ENOMEM;
 	}
 
-	/* Find out the supported Bus Speed Modes. */
-	err = mmc_sd_switch(card, 0, 0, 1, status);
+	/*
+	 * Find out the card's support bits with a mode 0 operation.
+	 * The argument does not matter, as the support bits do not
+	 * change with the arguments.
+	 */
+	err = mmc_sd_switch(card, 0, 0, 0, status);
 	if (err) {
 		/*
 		 * If the host or the card can't do the switch,
@@ -312,46 +316,8 @@ static int mmc_read_switch(struct mmc_card *card)
 
 	if (card->scr.sda_spec3) {
 		card->sw_caps.sd3_bus_mode = status[13];
-
-		/* Find out Driver Strengths supported by the card */
-		err = mmc_sd_switch(card, 0, 2, 1, status);
-		if (err) {
-			/*
-			 * If the host or the card can't do the switch,
-			 * fail more gracefully.
-			 */
-			if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
-				goto out;
-
-			pr_warning("%s: problem reading "
-				"Driver Strength.\n",
-				mmc_hostname(card->host));
-			err = 0;
-
-			goto out;
-		}
-
+		/* Driver Strengths supported by the card */
 		card->sw_caps.sd3_drv_type = status[9];
-
-		/* Find out Current Limits supported by the card */
-		err = mmc_sd_switch(card, 0, 3, 1, status);
-		if (err) {
-			/*
-			 * If the host or the card can't do the switch,
-			 * fail more gracefully.
-			 */
-			if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
-				goto out;
-
-			pr_warning("%s: problem reading "
-				"Current Limit.\n",
-				mmc_hostname(card->host));
-			err = 0;
-
-			goto out;
-		}
-
-		card->sw_caps.sd3_curr_limit = status[7];
 	}
 
 out:
@@ -551,60 +517,80 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
 	return 0;
 }
 
+/* Get host's max current setting at its current voltage */
+static u32 sd_get_host_max_current(struct mmc_host *host)
+{
+	u32 voltage, max_current;
+
+	voltage = 1 << host->ios.vdd;
+	switch (voltage) {
+	case MMC_VDD_165_195:
+		max_current = host->max_current_180;
+		break;
+	case MMC_VDD_29_30:
+	case MMC_VDD_30_31:
+		max_current = host->max_current_300;
+		break;
+	case MMC_VDD_32_33:
+	case MMC_VDD_33_34:
+		max_current = host->max_current_330;
+		break;
+	default:
+		max_current = 0;
+	}
+
+	return max_current;
+}
+
 static int sd_set_current_limit(struct mmc_card *card, u8 *status)
 {
-	int current_limit = 0;
+	int current_limit = SD_SET_CURRENT_NO_CHANGE;
 	int err;
+	u32 max_current;
 
 	/*
 	 * Current limit switch is only defined for SDR50, SDR104, and DDR50
-	 * bus speed modes. For other bus speed modes, we set the default
-	 * current limit of 200mA.
+	 * bus speed modes. For other bus speed modes, we do not change the
+	 * current limit.
 	 */
-	if ((card->sd_bus_speed == UHS_SDR50_BUS_SPEED) ||
-	    (card->sd_bus_speed == UHS_SDR104_BUS_SPEED) ||
-	    (card->sd_bus_speed == UHS_DDR50_BUS_SPEED)) {
-		if (card->host->caps & MMC_CAP_MAX_CURRENT_800) {
-			if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_800)
-				current_limit = SD_SET_CURRENT_LIMIT_800;
-			else if (card->sw_caps.sd3_curr_limit &
-					SD_MAX_CURRENT_600)
-				current_limit = SD_SET_CURRENT_LIMIT_600;
-			else if (card->sw_caps.sd3_curr_limit &
-					SD_MAX_CURRENT_400)
-				current_limit = SD_SET_CURRENT_LIMIT_400;
-			else if (card->sw_caps.sd3_curr_limit &
-					SD_MAX_CURRENT_200)
-				current_limit = SD_SET_CURRENT_LIMIT_200;
-		} else if (card->host->caps & MMC_CAP_MAX_CURRENT_600) {
-			if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_600)
-				current_limit = SD_SET_CURRENT_LIMIT_600;
-			else if (card->sw_caps.sd3_curr_limit &
-					SD_MAX_CURRENT_400)
-				current_limit = SD_SET_CURRENT_LIMIT_400;
-			else if (card->sw_caps.sd3_curr_limit &
-					SD_MAX_CURRENT_200)
-				current_limit = SD_SET_CURRENT_LIMIT_200;
-		} else if (card->host->caps & MMC_CAP_MAX_CURRENT_400) {
-			if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_400)
-				current_limit = SD_SET_CURRENT_LIMIT_400;
-			else if (card->sw_caps.sd3_curr_limit &
-					SD_MAX_CURRENT_200)
-				current_limit = SD_SET_CURRENT_LIMIT_200;
-		} else if (card->host->caps & MMC_CAP_MAX_CURRENT_200) {
-			if (card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_200)
-				current_limit = SD_SET_CURRENT_LIMIT_200;
-		}
-	} else
+	if ((card->sd_bus_speed != UHS_SDR50_BUS_SPEED) &&
+	    (card->sd_bus_speed != UHS_SDR104_BUS_SPEED) &&
+	    (card->sd_bus_speed != UHS_DDR50_BUS_SPEED))
+		return 0;
+
+	/*
+	 * Host has different current capabilities when operating at
+	 * different voltages, so find out its max current first.
+	 */
+	max_current = sd_get_host_max_current(card->host);
+
+	/*
+	 * We only check host's capability here, if we set a limit that is
+	 * higher than the card's maximum current, the card will be using its
+	 * maximum current, e.g. if the card's maximum current is 300ma, and
+	 * when we set current limit to 200ma, the card will draw 200ma, and
+	 * when we set current limit to 400/600/800ma, the card will draw its
+	 * maximum 300ma from the host.
+	 */
+	if (max_current >= 800)
+		current_limit = SD_SET_CURRENT_LIMIT_800;
+	else if (max_current >= 600)
+		current_limit = SD_SET_CURRENT_LIMIT_600;
+	else if (max_current >= 400)
+		current_limit = SD_SET_CURRENT_LIMIT_400;
+	else if (max_current >= 200)
 		current_limit = SD_SET_CURRENT_LIMIT_200;
 
-	err = mmc_sd_switch(card, 1, 3, current_limit, status);
-	if (err)
-		return err;
+	if (current_limit != SD_SET_CURRENT_NO_CHANGE) {
+		err = mmc_sd_switch(card, 1, 3, current_limit, status);
+		if (err)
+			return err;
 
-	if (((status[15] >> 4) & 0x0F) != current_limit)
-		pr_warning("%s: Problem setting current limit!\n",
-			mmc_hostname(card->host));
+		if (((status[15] >> 4) & 0x0F) != current_limit)
+			pr_warning("%s: Problem setting current limit!\n",
+				mmc_hostname(card->host));
+
+	}
 
 	return 0;
 }
@@ -726,6 +712,7 @@ struct device_type sd_type = {
 int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 {
 	int err;
+	u32 max_current;
 
 	/*
 	 * Since we're changing the OCR value, we seem to
@@ -753,9 +740,12 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 	    MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50))
 		ocr |= SD_OCR_S18R;
 
-	/* If the host can supply more than 150mA, XPC should be set to 1. */
-	if (host->caps & (MMC_CAP_SET_XPC_330 | MMC_CAP_SET_XPC_300 |
-	    MMC_CAP_SET_XPC_180))
+	/*
+	 * If the host can supply more than 150mA at current voltage,
+	 * XPC should be set to 1.
+	 */
+	max_current = sd_get_host_max_current(host);
+	if (max_current > 150)
 		ocr |= SD_OCR_XPC;
 
 try_again:
@@ -911,9 +901,6 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
 
-	/* The initialization should be done at 3.3 V I/O voltage. */
-	mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
-
 	err = mmc_sd_get_cid(host, ocr, cid, &rocr);
 	if (err)
 		return err;

drivers/mmc/core/sdio.c

@@ -591,9 +591,6 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	 * Inform the card of the voltage
 	 */
 	if (!powered_resume) {
-		/* The initialization should be done at 3.3 V I/O voltage. */
-		mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
-
 		err = mmc_send_io_op_cond(host, host->ocr, &ocr);
 		if (err)
 			goto err;
@@ -1006,10 +1003,6 @@ static int mmc_sdio_power_restore(struct mmc_host *host)
 	 * restore the correct voltage setting of the card.
 	 */
 
-	/* The initialization should be done at 3.3 V I/O voltage. */
-	if (!mmc_card_keep_power(host))
-		mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
-
 	sdio_reset(host);
 	mmc_go_idle(host);
 	mmc_send_if_cond(host, host->ocr_avail);

drivers/mmc/core/sdio_cis.c

@@ -313,7 +313,7 @@ static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func)
 
 			if (ret == -ENOENT) {
 				/* warn about unknown tuples */
-				pr_warning("%s: queuing unknown"
+				pr_warn_ratelimited("%s: queuing unknown"
 				       " CIS tuple 0x%02x (%u bytes)\n",
 				       mmc_hostname(card->host),
 				       tpl_code, tpl_link);

drivers/mmc/core/slot-gpio.c

+/*
+ * Generic GPIO card-detect helper
+ *
+ * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+struct mmc_gpio {
+	int ro_gpio;
+	int cd_gpio;
+	char *ro_label;
+	char cd_label[0];
+};
+
+static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
+{
+	/* Schedule a card detection after a debounce timeout */
+	mmc_detect_change(dev_id, msecs_to_jiffies(100));
+	return IRQ_HANDLED;
+}
+
+static int mmc_gpio_alloc(struct mmc_host *host)
+{
+	size_t len = strlen(dev_name(host->parent)) + 4;
+	struct mmc_gpio *ctx;
+
+	mutex_lock(&host->slot.lock);
+
+	ctx = host->slot.handler_priv;
+	if (!ctx) {
+		/*
+		 * devm_kzalloc() can be called after device_initialize(), even
+		 * before device_add(), i.e., between mmc_alloc_host() and
+		 * mmc_add_host()
+		 */
+		ctx = devm_kzalloc(&host->class_dev, sizeof(*ctx) + 2 * len,
+				   GFP_KERNEL);
+		if (ctx) {
+			ctx->ro_label = ctx->cd_label + len;
+			snprintf(ctx->cd_label, len, "%s cd", dev_name(host->parent));
+			snprintf(ctx->ro_label, len, "%s ro", dev_name(host->parent));
+			ctx->cd_gpio = -EINVAL;
+			ctx->ro_gpio = -EINVAL;
+			host->slot.handler_priv = ctx;
+		}
+	}
+
+	mutex_unlock(&host->slot.lock);
+
+	return ctx ? 0 : -ENOMEM;
+}
+
+int mmc_gpio_get_ro(struct mmc_host *host)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+
+	if (!ctx || !gpio_is_valid(ctx->ro_gpio))
+		return -ENOSYS;
+
+	return !gpio_get_value_cansleep(ctx->ro_gpio) ^
+		!!(host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH);
+}
+EXPORT_SYMBOL(mmc_gpio_get_ro);
+
+int mmc_gpio_get_cd(struct mmc_host *host)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+
+	if (!ctx || !gpio_is_valid(ctx->cd_gpio))
+		return -ENOSYS;
+
+	return !gpio_get_value_cansleep(ctx->cd_gpio) ^
+		!!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
+}
+EXPORT_SYMBOL(mmc_gpio_get_cd);
+
+int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio)
+{
+	struct mmc_gpio *ctx;
+	int ret;
+
+	if (!gpio_is_valid(gpio))
+		return -EINVAL;
+
+	ret = mmc_gpio_alloc(host);
+	if (ret < 0)
+		return ret;
+
+	ctx = host->slot.handler_priv;
+
+	return gpio_request_one(gpio, GPIOF_DIR_IN, ctx->ro_label);
+}
+EXPORT_SYMBOL(mmc_gpio_request_ro);
+
+int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio)
+{
+	struct mmc_gpio *ctx;
+	int irq = gpio_to_irq(gpio);
+	int ret;
+
+	ret = mmc_gpio_alloc(host);
+	if (ret < 0)
+		return ret;
+
+	ctx = host->slot.handler_priv;
+
+	ret = gpio_request_one(gpio, GPIOF_DIR_IN, ctx->cd_label);
+	if (ret < 0)
+		/*
+		 * don't bother freeing memory. It might still get used by other
+		 * slot functions, in any case it will be freed, when the device
+		 * is destroyed.
+		 */
+		return ret;
+
+	/*
+	 * Even if gpio_to_irq() returns a valid IRQ number, the platform might
+	 * still prefer to poll, e.g., because that IRQ number is already used
+	 * by another unit and cannot be shared.
+	 */
+	if (irq >= 0 && host->caps & MMC_CAP_NEEDS_POLL)
+		irq = -EINVAL;
+
+	if (irq >= 0) {
+		ret = request_threaded_irq(irq, NULL, mmc_gpio_cd_irqt,
+			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			ctx->cd_label, host);
+		if (ret < 0)
+			irq = ret;
+	}
+
+	host->slot.cd_irq = irq;
+
+	if (irq < 0)
+		host->caps |= MMC_CAP_NEEDS_POLL;
+
+	ctx->cd_gpio = gpio;
+
+	return 0;
+}
+EXPORT_SYMBOL(mmc_gpio_request_cd);
+
+void mmc_gpio_free_ro(struct mmc_host *host)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+	int gpio;
+
+	if (!ctx || !gpio_is_valid(ctx->ro_gpio))
+		return;
+
+	gpio = ctx->ro_gpio;
+	ctx->ro_gpio = -EINVAL;
+
+	gpio_free(gpio);
+}
+EXPORT_SYMBOL(mmc_gpio_free_ro);
+
+void mmc_gpio_free_cd(struct mmc_host *host)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+	int gpio;
+
+	if (!ctx || !gpio_is_valid(ctx->cd_gpio))
+		return;
+
+	if (host->slot.cd_irq >= 0) {
+		free_irq(host->slot.cd_irq, host);
+		host->slot.cd_irq = -EINVAL;
+	}
+
+	gpio = ctx->cd_gpio;
+	ctx->cd_gpio = -EINVAL;
+
+	gpio_free(gpio);
+}
+EXPORT_SYMBOL(mmc_gpio_free_cd);

drivers/mmc/host/atmel-mci.c

@@ -391,11 +391,17 @@ static int atmci_regs_show(struct seq_file *s, void *v)
 	clk_disable(host->mck);
 	spin_unlock_bh(&host->lock);
 
-	seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
+	seq_printf(s, "MR:\t0x%08x%s%s ",
 			buf[ATMCI_MR / 4],
 			buf[ATMCI_MR / 4] & ATMCI_MR_RDPROOF ? " RDPROOF" : "",
-			buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : "",
-			buf[ATMCI_MR / 4] & 0xff);
+			buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : "");
+	if (host->caps.has_odd_clk_div)
+		seq_printf(s, "{CLKDIV,CLKODD}=%u\n",
+				((buf[ATMCI_MR / 4] & 0xff) << 1)
+				| ((buf[ATMCI_MR / 4] >> 16) & 1));
+	else
+		seq_printf(s, "CLKDIV=%u\n",
+				(buf[ATMCI_MR / 4] & 0xff));
 	seq_printf(s, "DTOR:\t0x%08x\n", buf[ATMCI_DTOR / 4]);
 	seq_printf(s, "SDCR:\t0x%08x\n", buf[ATMCI_SDCR / 4]);
 	seq_printf(s, "ARGR:\t0x%08x\n", buf[ATMCI_ARGR / 4]);
@@ -1685,7 +1691,6 @@ static void atmci_tasklet_func(unsigned long priv)
 
 			dev_dbg(&host->pdev->dev, "FSM: cmd ready\n");
 			host->cmd = NULL;
-			host->data = NULL;
 			data->bytes_xfered = data->blocks * data->blksz;
 			data->error = 0;
 			atmci_command_complete(host, mrq->stop);
@@ -1699,6 +1704,7 @@ static void atmci_tasklet_func(unsigned long priv)
 				atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
 				state = STATE_WAITING_NOTBUSY;
 			}
+			host->data = NULL;
 			break;
 
 		case STATE_END_REQUEST:

drivers/mmc/host/dw_mmc.c

@@ -405,11 +405,23 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
 static int dw_mci_idmac_init(struct dw_mci *host)
 {
 	struct idmac_desc *p;
-	int i;
+	int i, dma_support;
 
 	/* Number of descriptors in the ring buffer */
 	host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
 
+	/* Check if Hardware Configuration Register has support for DMA */
+	dma_support = (mci_readl(host, HCON) >> 16) & 0x3;
+
+	if (!dma_support || dma_support > 2) {
+		dev_err(&host->dev,
+			"Host Controller does not support IDMA Tx.\n");
+		host->dma_ops = NULL;
+		return -ENODEV;
+	}
+
+	dev_info(&host->dev, "Using internal DMA controller.\n");
+
 	/* Forward link the descriptor list */
 	for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
 		p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1));
@@ -1876,7 +1888,6 @@ static void dw_mci_init_dma(struct dw_mci *host)
 	/* Determine which DMA interface to use */
 #ifdef CONFIG_MMC_DW_IDMAC
 	host->dma_ops = &dw_mci_idmac_ops;
-	dev_info(&host->dev, "Using internal DMA controller.\n");
 #endif
 
 	if (!host->dma_ops)
@@ -2175,7 +2186,7 @@ int dw_mci_resume(struct dw_mci *host)
 		return ret;
 	}
 
-	if (host->dma_ops->init)
+	if (host->use_dma && host->dma_ops->init)
 		host->dma_ops->init(host);
 
 	/* Restore the old value at FIFOTH register */

drivers/mmc/host/mxs-mmc.c

@@ -164,16 +164,23 @@ struct mxs_mmc_host {
 	spinlock_t			lock;
 	int				sdio_irq_en;
 	int				wp_gpio;
+	bool				wp_inverted;
 };
 
 static int mxs_mmc_get_ro(struct mmc_host *mmc)
 {
 	struct mxs_mmc_host *host = mmc_priv(mmc);
+	int ret;
 
 	if (!gpio_is_valid(host->wp_gpio))
 		return -EINVAL;
 
-	return gpio_get_value(host->wp_gpio);
+	ret = gpio_get_value(host->wp_gpio);
+
+	if (host->wp_inverted)
+		ret = !ret;
+
+	return ret;
 }
 
 static int mxs_mmc_get_cd(struct mmc_host *mmc)
@@ -707,6 +714,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 	struct pinctrl *pinctrl;
 	int ret = 0, irq_err, irq_dma;
 	dma_cap_mask_t mask;
+	struct regulator *reg_vmmc;
+	enum of_gpio_flags flags;
 
 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -747,6 +756,16 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 	host->mmc = mmc;
 	host->sdio_irq_en = 0;
 
+	reg_vmmc = devm_regulator_get(&pdev->dev, "vmmc");
+	if (!IS_ERR(reg_vmmc)) {
+		ret = regulator_enable(reg_vmmc);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Failed to enable vmmc regulator: %d\n", ret);
+			goto out_mmc_free;
+		}
+	}
+
 	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	if (IS_ERR(pinctrl)) {
 		ret = PTR_ERR(pinctrl);
@@ -785,7 +804,10 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 			mmc->caps |= MMC_CAP_4_BIT_DATA;
 		else if (bus_width == 8)
 			mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
-		host->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
+		host->wp_gpio = of_get_named_gpio_flags(np, "wp-gpios", 0,
+							&flags);
+		if (flags & OF_GPIO_ACTIVE_LOW)
+			host->wp_inverted = 1;
 	} else {
 		if (pdata->flags & SLOTF_8_BIT_CAPABLE)
 			mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;

drivers/mmc/host/omap_hsmmc.c

@@ -1089,7 +1089,7 @@ static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd)
 	/* Disable the clocks */
 	pm_runtime_put_sync(host->dev);
 	if (host->dbclk)
-		clk_disable(host->dbclk);
+		clk_disable_unprepare(host->dbclk);
 
 	/* Turn the power off */
 	ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
@@ -1100,7 +1100,7 @@ static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd)
 					       vdd);
 	pm_runtime_get_sync(host->dev);
 	if (host->dbclk)
-		clk_enable(host->dbclk);
+		clk_prepare_enable(host->dbclk);
 
 	if (ret != 0)
 		goto err;
@@ -1899,7 +1899,7 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
 	if (IS_ERR(host->dbclk)) {
 		dev_warn(mmc_dev(host->mmc), "Failed to get debounce clk\n");
 		host->dbclk = NULL;
-	} else if (clk_enable(host->dbclk) != 0) {
+	} else if (clk_prepare_enable(host->dbclk) != 0) {
 		dev_warn(mmc_dev(host->mmc), "Failed to enable debounce clk\n");
 		clk_put(host->dbclk);
 		host->dbclk = NULL;
@@ -1931,6 +1931,7 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
 	res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
 	if (!res) {
 		dev_err(mmc_dev(host->mmc), "cannot get DMA TX channel\n");
+		ret = -ENXIO;
 		goto err_irq;
 	}
 	host->dma_line_tx = res->start;
@@ -1938,6 +1939,7 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
 	res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
 	if (!res) {
 		dev_err(mmc_dev(host->mmc), "cannot get DMA RX channel\n");
+		ret = -ENXIO;
 		goto err_irq;
 	}
 	host->dma_line_rx = res->start;
@@ -2023,7 +2025,7 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
 	pm_runtime_disable(host->dev);
 	clk_put(host->fclk);
 	if (host->dbclk) {
-		clk_disable(host->dbclk);
+		clk_disable_unprepare(host->dbclk);
 		clk_put(host->dbclk);
 	}
 err1:
@@ -2058,7 +2060,7 @@ static int __devexit omap_hsmmc_remove(struct platform_device *pdev)
 	pm_runtime_disable(host->dev);
 	clk_put(host->fclk);
 	if (host->dbclk) {
-		clk_disable(host->dbclk);
+		clk_disable_unprepare(host->dbclk);
 		clk_put(host->dbclk);
 	}
 
@@ -2116,7 +2118,7 @@ static int omap_hsmmc_suspend(struct device *dev)
 	}
 
 	if (host->dbclk)
-		clk_disable(host->dbclk);
+		clk_disable_unprepare(host->dbclk);
 err:
 	pm_runtime_put_sync(host->dev);
 	return ret;
@@ -2137,7 +2139,7 @@ static int omap_hsmmc_resume(struct device *dev)
 	pm_runtime_get_sync(host->dev);
 
 	if (host->dbclk)
-		clk_enable(host->dbclk);
+		clk_prepare_enable(host->dbclk);
 
 	if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
 		omap_hsmmc_conf_bus_power(host);

drivers/mmc/host/s3cmci.c

@@ -26,7 +26,6 @@
 #include <mach/dma.h>
 
 #include <mach/regs-sdi.h>
-#include <mach/regs-gpio.h>
 
 #include <plat/mci.h>
 
@@ -1237,12 +1236,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	switch (ios->power_mode) {
 	case MMC_POWER_ON:
 	case MMC_POWER_UP:
-		s3c2410_gpio_cfgpin(S3C2410_GPE(5), S3C2410_GPE5_SDCLK);
-		s3c2410_gpio_cfgpin(S3C2410_GPE(6), S3C2410_GPE6_SDCMD);
-		s3c2410_gpio_cfgpin(S3C2410_GPE(7), S3C2410_GPE7_SDDAT0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
-		s3c2410_gpio_cfgpin(S3C2410_GPE(9), S3C2410_GPE9_SDDAT2);
-		s3c2410_gpio_cfgpin(S3C2410_GPE(10), S3C2410_GPE10_SDDAT3);
+		/* Configure GPE5...GPE10 pins in SD mode */
+		s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
+				      S3C_GPIO_PULL_NONE);
 
 		if (host->pdata->set_power)
 			host->pdata->set_power(ios->power_mode, ios->vdd);

drivers/mmc/host/sdhci-dove.c

@@ -20,11 +20,17 @@
  */
 
 #include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/module.h>
 #include <linux/mmc/host.h>
 
 #include "sdhci-pltfm.h"
 
+struct sdhci_dove_priv {
+	struct clk *clk;
+};
+
 static u16 sdhci_dove_readw(struct sdhci_host *host, int reg)
 {
 	u16 ret;
@@ -66,16 +72,57 @@ static struct sdhci_pltfm_data sdhci_dove_pdata = {
 	.quirks	= SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
 		  SDHCI_QUIRK_NO_BUSY_IRQ |
 		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
-		  SDHCI_QUIRK_FORCE_DMA,
+		  SDHCI_QUIRK_FORCE_DMA |
+		  SDHCI_QUIRK_NO_HISPD_BIT,
 };
 
 static int __devinit sdhci_dove_probe(struct platform_device *pdev)
 {
-	return sdhci_pltfm_register(pdev, &sdhci_dove_pdata);
+	struct sdhci_host *host;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_dove_priv *priv;
+	int ret;
+
+	ret = sdhci_pltfm_register(pdev, &sdhci_dove_pdata);
+	if (ret)
+		goto sdhci_dove_register_fail;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_dove_priv),
+			    GFP_KERNEL);
+	if (!priv) {
+		dev_err(&pdev->dev, "unable to allocate private data");
+		ret = -ENOMEM;
+		goto sdhci_dove_allocate_fail;
+	}
+
+	host = platform_get_drvdata(pdev);
+	pltfm_host = sdhci_priv(host);
+	pltfm_host->priv = priv;
+
+	priv->clk = clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(priv->clk))
+		clk_prepare_enable(priv->clk);
+	return 0;
+
+sdhci_dove_allocate_fail:
+	sdhci_pltfm_unregister(pdev);
+sdhci_dove_register_fail:
+	return ret;
 }
 
 static int __devexit sdhci_dove_remove(struct platform_device *pdev)
 {
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_dove_priv *priv = pltfm_host->priv;
+
+	if (priv->clk) {
+		if (!IS_ERR(priv->clk)) {
+			clk_disable_unprepare(priv->clk);
+			clk_put(priv->clk);
+		}
+		devm_kfree(&pdev->dev, priv->clk);
+	}
 	return sdhci_pltfm_unregister(pdev);
 }
 

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -299,6 +299,8 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 
 static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
 {
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = pltfm_host->priv;
 	u32 new_val;
 
 	switch (reg) {
@@ -315,8 +317,11 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
 				SDHCI_CTRL_D3CD);
 		/* ensure the endianess */
 		new_val |= ESDHC_HOST_CONTROL_LE;
-		/* DMA mode bits are shifted */
-		new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
+		/* bits 8&9 are reserved on mx25 */
+		if (!is_imx25_esdhc(imx_data)) {
+			/* DMA mode bits are shifted */
+			new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
+		}
 
 		esdhc_clrset_le(host, 0xffff, new_val, reg);
 		return;

drivers/mmc/host/sdhci-pci.c

@@ -157,6 +157,7 @@ static const struct sdhci_pci_fixes sdhci_ene_714 = {
 static const struct sdhci_pci_fixes sdhci_cafe = {
 	.quirks		= SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
 			  SDHCI_QUIRK_NO_BUSY_IRQ |
+			  SDHCI_QUIRK_BROKEN_CARD_DETECTION |
 			  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
 };
 

drivers/mmc/host/sdhci-pxav2.c

@@ -28,6 +28,9 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_data/pxa_sdhci.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
 
@@ -121,6 +124,48 @@ static struct sdhci_ops pxav2_sdhci_ops = {
 	.platform_8bit_width = pxav2_mmc_set_width,
 };
 
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_pxav2_of_match[] = {
+	{
+		.compatible = "mrvl,pxav2-mmc",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, sdhci_pxav2_of_match);
+
+static struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev)
+{
+	struct sdhci_pxa_platdata *pdata;
+	struct device_node *np = dev->of_node;
+	u32 bus_width;
+	u32 clk_delay_cycles;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	if (of_find_property(np, "non-removable", NULL))
+		pdata->flags |= PXA_FLAG_CARD_PERMANENT;
+
+	of_property_read_u32(np, "bus-width", &bus_width);
+	if (bus_width == 8)
+		pdata->flags |= PXA_FLAG_SD_8_BIT_CAPABLE_SLOT;
+
+	of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles);
+	if (clk_delay_cycles > 0) {
+		pdata->clk_delay_sel = 1;
+		pdata->clk_delay_cycles = clk_delay_cycles;
+	}
+
+	return pdata;
+}
+#else
+static inline struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
 static int __devinit sdhci_pxav2_probe(struct platform_device *pdev)
 {
 	struct sdhci_pltfm_host *pltfm_host;
@@ -128,6 +173,8 @@ static int __devinit sdhci_pxav2_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct sdhci_host *host = NULL;
 	struct sdhci_pxa *pxa = NULL;
+	const struct of_device_id *match;
+
 	int ret;
 	struct clk *clk;
 
@@ -156,6 +203,10 @@ static int __devinit sdhci_pxav2_probe(struct platform_device *pdev)
 		| SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
 		| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
 
+	match = of_match_device(of_match_ptr(sdhci_pxav2_of_match), &pdev->dev);
+	if (match) {
+		pdata = pxav2_get_mmc_pdata(dev);
+	}
 	if (pdata) {
 		if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
 			/* on-chip device */
@@ -218,6 +269,9 @@ static struct platform_driver sdhci_pxav2_driver = {
 	.driver		= {
 		.name	= "sdhci-pxav2",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_OF
+		.of_match_table = sdhci_pxav2_of_match,
+#endif
 		.pm	= SDHCI_PLTFM_PMOPS,
 	},
 	.probe		= sdhci_pxav2_probe,

drivers/mmc/host/sdhci-pxav3.c

@@ -28,6 +28,9 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
 
@@ -164,6 +167,46 @@ static struct sdhci_ops pxav3_sdhci_ops = {
 	.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
 };
 
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_pxav3_of_match[] = {
+	{
+		.compatible = "mrvl,pxav3-mmc",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match);
+
+static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
+{
+	struct sdhci_pxa_platdata *pdata;
+	struct device_node *np = dev->of_node;
+	u32 bus_width;
+	u32 clk_delay_cycles;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	if (of_find_property(np, "non-removable", NULL))
+		pdata->flags |= PXA_FLAG_CARD_PERMANENT;
+
+	of_property_read_u32(np, "bus-width", &bus_width);
+	if (bus_width == 8)
+		pdata->flags |= PXA_FLAG_SD_8_BIT_CAPABLE_SLOT;
+
+	of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles);
+	if (clk_delay_cycles > 0)
+		pdata->clk_delay_cycles = clk_delay_cycles;
+
+	return pdata;
+}
+#else
+static inline struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
 static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
 {
 	struct sdhci_pltfm_host *pltfm_host;
@@ -171,6 +214,8 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct sdhci_host *host = NULL;
 	struct sdhci_pxa *pxa = NULL;
+	const struct of_device_id *match;
+
 	int ret;
 	struct clk *clk;
 
@@ -202,6 +247,10 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
 	/* enable 1/8V DDR capable */
 	host->mmc->caps |= MMC_CAP_1_8V_DDR;
 
+	match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev);
+	if (match)
+		pdata = pxav3_get_mmc_pdata(dev);
+
 	if (pdata) {
 		if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
 			/* on-chip device */
@@ -263,6 +312,9 @@ static int __devexit sdhci_pxav3_remove(struct platform_device *pdev)
 static struct platform_driver sdhci_pxav3_driver = {
 	.driver		= {
 		.name	= "sdhci-pxav3",
+#ifdef CONFIG_OF
+		.of_match_table = sdhci_pxav3_of_match,
+#endif
 		.owner	= THIS_MODULE,
 		.pm	= SDHCI_PLTFM_PMOPS,
 	},

drivers/mmc/host/sdhci.h

@@ -205,6 +205,7 @@
 #define SDHCI_CAPABILITIES_1	0x44
 
 #define SDHCI_MAX_CURRENT		0x48
+#define  SDHCI_MAX_CURRENT_LIMIT	0xFF
 #define  SDHCI_MAX_CURRENT_330_MASK	0x0000FF
 #define  SDHCI_MAX_CURRENT_330_SHIFT	0
 #define  SDHCI_MAX_CURRENT_300_MASK	0x00FF00

drivers/mmc/host/sh_mobile_sdhi.c

@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mmc/host.h>
@@ -39,22 +40,39 @@ struct sh_mobile_sdhi {
 	struct tmio_mmc_dma dma_priv;
 };
 
+static int sh_mobile_sdhi_clk_enable(struct platform_device *pdev, unsigned int *f)
+{
+	struct mmc_host *mmc = dev_get_drvdata(&pdev->dev);
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	struct sh_mobile_sdhi *priv = container_of(host->pdata, struct sh_mobile_sdhi, mmc_data);
+	int ret = clk_enable(priv->clk);
+	if (ret < 0)
+		return ret;
+
+	*f = clk_get_rate(priv->clk);
+	return 0;
+}
+
+static void sh_mobile_sdhi_clk_disable(struct platform_device *pdev)
+{
+	struct mmc_host *mmc = dev_get_drvdata(&pdev->dev);
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	struct sh_mobile_sdhi *priv = container_of(host->pdata, struct sh_mobile_sdhi, mmc_data);
+	clk_disable(priv->clk);
+}
+
 static void sh_mobile_sdhi_set_pwr(struct platform_device *pdev, int state)
 {
 	struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
 
-	if (p && p->set_pwr)
-		p->set_pwr(pdev, state);
+	p->set_pwr(pdev, state);
 }
 
 static int sh_mobile_sdhi_get_cd(struct platform_device *pdev)
 {
 	struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
 
-	if (p && p->get_cd)
-		return p->get_cd(pdev);
-	else
-		return -ENOSYS;
+	return p->get_cd(pdev);
 }
 
 static int sh_mobile_sdhi_wait_idle(struct tmio_mmc_host *host)
@@ -116,12 +134,14 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
 	}
 
 	mmc_data = &priv->mmc_data;
-	p->pdata = mmc_data;
 
-	if (p->init) {
-		ret = p->init(pdev, &sdhi_ops);
-		if (ret)
-			goto einit;
+	if (p) {
+		p->pdata = mmc_data;
+		if (p->init) {
+			ret = p->init(pdev, &sdhi_ops);
+			if (ret)
+				goto einit;
+		}
 	}
 
 	snprintf(clk_name, sizeof(clk_name), "sdhi%d", pdev->id);
@@ -132,9 +152,8 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
 		goto eclkget;
 	}
 
-	mmc_data->hclk = clk_get_rate(priv->clk);
-	mmc_data->set_pwr = sh_mobile_sdhi_set_pwr;
-	mmc_data->get_cd = sh_mobile_sdhi_get_cd;
+	mmc_data->clk_enable = sh_mobile_sdhi_clk_enable;
+	mmc_data->clk_disable = sh_mobile_sdhi_clk_disable;
 	mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED;
 	if (p) {
 		mmc_data->flags = p->tmio_flags;
@@ -142,7 +161,12 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
 			mmc_data->write16_hook = sh_mobile_sdhi_write16_hook;
 		mmc_data->ocr_mask = p->tmio_ocr_mask;
 		mmc_data->capabilities |= p->tmio_caps;
+		mmc_data->capabilities2 |= p->tmio_caps2;
 		mmc_data->cd_gpio = p->cd_gpio;
+		if (p->set_pwr)
+			mmc_data->set_pwr = sh_mobile_sdhi_set_pwr;
+		if (p->get_cd)
+			mmc_data->get_cd = sh_mobile_sdhi_get_cd;
 
 		if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) {
 			priv->param_tx.slave_id = p->dma_slave_tx;
@@ -248,7 +272,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
 eprobe:
 	clk_put(priv->clk);
 eclkget:
-	if (p->cleanup)
+	if (p && p->cleanup)
 		p->cleanup(pdev);
 einit:
 	kfree(priv);
@@ -263,7 +287,8 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
 	struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
 	int i = 0, irq;
 
-	p->pdata = NULL;
+	if (p)
+		p->pdata = NULL;
 
 	tmio_mmc_host_remove(host);
 
@@ -276,7 +301,7 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
 
 	clk_put(priv->clk);
 
-	if (p->cleanup)
+	if (p && p->cleanup)
 		p->cleanup(pdev);
 
 	kfree(priv);
@@ -291,11 +316,18 @@ static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
 	.runtime_resume = tmio_mmc_host_runtime_resume,
 };
 
+static const struct of_device_id sh_mobile_sdhi_of_match[] = {
+	{ .compatible = "renesas,shmobile-sdhi" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
+
 static struct platform_driver sh_mobile_sdhi_driver = {
 	.driver		= {
 		.name	= "sh_mobile_sdhi",
 		.owner	= THIS_MODULE,
 		.pm	= &tmio_mmc_dev_pm_ops,
+		.of_match_table = sh_mobile_sdhi_of_match,
 	},
 	.probe		= sh_mobile_sdhi_probe,
 	.remove		= __devexit_p(sh_mobile_sdhi_remove),

drivers/mmc/host/tmio_mmc_pio.c

@@ -34,8 +34,9 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/mfd/tmio.h>
-#include <linux/mmc/cd-gpio.h>
 #include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/mmc/tmio.h>
 #include <linux/module.h>
 #include <linux/pagemap.h>
@@ -305,8 +306,8 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command
 	int c = cmd->opcode;
 	u32 irq_mask = TMIO_MASK_CMD;
 
-	/* Command 12 is handled by hardware */
-	if (cmd->opcode == 12 && !cmd->arg) {
+	/* CMD12 is handled by hardware */
+	if (cmd->opcode == MMC_STOP_TRANSMISSION && !cmd->arg) {
 		sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001);
 		return 0;
 	}
@@ -449,7 +450,7 @@ void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
 	}
 
 	if (stop) {
-		if (stop->opcode == 12 && !stop->arg)
+		if (stop->opcode == MMC_STOP_TRANSMISSION && !stop->arg)
 			sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000);
 		else
 			BUG();
@@ -751,6 +752,34 @@ static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	mmc_request_done(mmc, mrq);
 }
 
+static int tmio_mmc_clk_update(struct mmc_host *mmc)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	struct tmio_mmc_data *pdata = host->pdata;
+	int ret;
+
+	if (!pdata->clk_enable)
+		return -ENOTSUPP;
+
+	ret = pdata->clk_enable(host->pdev, &mmc->f_max);
+	if (!ret)
+		mmc->f_min = mmc->f_max / 512;
+
+	return ret;
+}
+
+static void tmio_mmc_set_power(struct tmio_mmc_host *host, struct mmc_ios *ios)
+{
+	struct mmc_host *mmc = host->mmc;
+
+	if (host->set_pwr)
+		host->set_pwr(host->pdev, ios->power_mode != MMC_POWER_OFF);
+	if (!IS_ERR(mmc->supply.vmmc))
+		/* Errors ignored... */
+		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
+				      ios->power_mode ? ios->vdd : 0);
+}
+
 /* Set MMC clock / power.
  * Note: This controller uses a simple divider scheme therefore it cannot
  * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
@@ -797,32 +826,37 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	 */
 	if (ios->power_mode == MMC_POWER_ON && ios->clock) {
 		if (!host->power) {
+			tmio_mmc_clk_update(mmc);
 			pm_runtime_get_sync(dev);
 			host->power = true;
 		}
 		tmio_mmc_set_clock(host, ios->clock);
 		/* power up SD bus */
-		if (host->set_pwr)
-			host->set_pwr(host->pdev, 1);
+		tmio_mmc_set_power(host, ios);
 		/* start bus clock */
 		tmio_mmc_clk_start(host);
 	} else if (ios->power_mode != MMC_POWER_UP) {
-		if (host->set_pwr && ios->power_mode == MMC_POWER_OFF)
-			host->set_pwr(host->pdev, 0);
+		if (ios->power_mode == MMC_POWER_OFF)
+			tmio_mmc_set_power(host, ios);
 		if (host->power) {
+			struct tmio_mmc_data *pdata = host->pdata;
+			tmio_mmc_clk_stop(host);
 			host->power = false;
 			pm_runtime_put(dev);
+			if (pdata->clk_disable)
+				pdata->clk_disable(host->pdev);
 		}
-		tmio_mmc_clk_stop(host);
 	}
 
-	switch (ios->bus_width) {
-	case MMC_BUS_WIDTH_1:
-		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
-	break;
-	case MMC_BUS_WIDTH_4:
-		sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
-	break;
+	if (host->power) {
+		switch (ios->bus_width) {
+		case MMC_BUS_WIDTH_1:
+			sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
+		break;
+		case MMC_BUS_WIDTH_4:
+			sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
+		break;
+		}
 	}
 
 	/* Let things settle. delay taken from winCE driver */
@@ -841,6 +875,9 @@ static int tmio_mmc_get_ro(struct mmc_host *mmc)
 {
 	struct tmio_mmc_host *host = mmc_priv(mmc);
 	struct tmio_mmc_data *pdata = host->pdata;
+	int ret = mmc_gpio_get_ro(mmc);
+	if (ret >= 0)
+		return ret;
 
 	return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
 		 (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
@@ -850,6 +887,9 @@ static int tmio_mmc_get_cd(struct mmc_host *mmc)
 {
 	struct tmio_mmc_host *host = mmc_priv(mmc);
 	struct tmio_mmc_data *pdata = host->pdata;
+	int ret = mmc_gpio_get_cd(mmc);
+	if (ret >= 0)
+		return ret;
 
 	if (!pdata->get_cd)
 		return -ENOSYS;
@@ -865,6 +905,19 @@ static const struct mmc_host_ops tmio_mmc_ops = {
 	.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
 };
 
+static void tmio_mmc_init_ocr(struct tmio_mmc_host *host)
+{
+	struct tmio_mmc_data *pdata = host->pdata;
+	struct mmc_host *mmc = host->mmc;
+
+	mmc_regulator_get_supply(mmc);
+
+	if (!mmc->ocr_avail)
+		mmc->ocr_avail = pdata->ocr_mask ? : MMC_VDD_32_33 | MMC_VDD_33_34;
+	else if (pdata->ocr_mask)
+		dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
+}
+
 int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
 				  struct platform_device *pdev,
 				  struct tmio_mmc_data *pdata)
@@ -904,18 +957,14 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
 
 	mmc->ops = &tmio_mmc_ops;
 	mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities;
-	mmc->f_max = pdata->hclk;
-	mmc->f_min = mmc->f_max / 512;
+	mmc->caps2 = pdata->capabilities2;
 	mmc->max_segs = 32;
 	mmc->max_blk_size = 512;
 	mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) *
 		mmc->max_segs;
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
 	mmc->max_seg_size = mmc->max_req_size;
-	if (pdata->ocr_mask)
-		mmc->ocr_avail = pdata->ocr_mask;
-	else
-		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	tmio_mmc_init_ocr(_host);
 
 	_host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD ||
 				  mmc->caps & MMC_CAP_NEEDS_POLL ||
@@ -927,6 +976,11 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
 	if (ret < 0)
 		goto pm_disable;
 
+	if (tmio_mmc_clk_update(mmc) < 0) {
+		mmc->f_max = pdata->hclk;
+		mmc->f_min = mmc->f_max / 512;
+	}
+
 	/*
 	 * There are 4 different scenarios for the card detection:
 	 *  1) an external gpio irq handles the cd (best for power savings)
@@ -937,7 +991,6 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
 	 *  While we increment the runtime PM counter for all scenarios when
 	 *  the mmc core activates us by calling an appropriate set_ios(), we
 	 *  must additionally ensure that in case 2) the tmio mmc hardware stays
-	 *  additionally ensure that in case 2) the tmio mmc hardware stays
 	 *  powered on during runtime for the card detection to work.
 	 */
 	if (_host->native_hotplug)
@@ -948,6 +1001,17 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
 
 	_host->sdcard_irq_mask = sd_ctrl_read32(_host, CTL_IRQ_MASK);
 	tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
+
+	/* Unmask the IRQs we want to know about */
+	if (!_host->chan_rx)
+		irq_mask |= TMIO_MASK_READOP;
+	if (!_host->chan_tx)
+		irq_mask |= TMIO_MASK_WRITEOP;
+	if (!_host->native_hotplug)
+		irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
+
+	_host->sdcard_irq_mask &= ~irq_mask;
+
 	if (pdata->flags & TMIO_MMC_SDIO_IRQ)
 		tmio_mmc_enable_sdio_irq(mmc, 0);
 
@@ -961,22 +1025,18 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host,
 	/* See if we also get DMA */
 	tmio_mmc_request_dma(_host, pdata);
 
-	mmc_add_host(mmc);
+	ret = mmc_add_host(mmc);
+	if (pdata->clk_disable)
+		pdata->clk_disable(pdev);
+	if (ret < 0) {
+		tmio_mmc_host_remove(_host);
+		return ret;
+	}
 
 	dev_pm_qos_expose_latency_limit(&pdev->dev, 100);
 
-	/* Unmask the IRQs we want to know about */
-	if (!_host->chan_rx)
-		irq_mask |= TMIO_MASK_READOP;
-	if (!_host->chan_tx)
-		irq_mask |= TMIO_MASK_WRITEOP;
-	if (!_host->native_hotplug)
-		irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
-
-	tmio_mmc_enable_mmc_irqs(_host, irq_mask);
-
 	if (pdata->flags & TMIO_MMC_USE_GPIO_CD) {
-		ret = mmc_cd_gpio_request(mmc, pdata->cd_gpio);
+		ret = mmc_gpio_request_cd(mmc, pdata->cd_gpio);
 		if (ret < 0) {
 			tmio_mmc_host_remove(_host);
 			return ret;
@@ -1008,7 +1068,7 @@ void tmio_mmc_host_remove(struct tmio_mmc_host *host)
 		 * This means we can miss a card-eject, but this is anyway
 		 * possible, because of delayed processing of hotplug events.
 		 */
-		mmc_cd_gpio_free(mmc);
+		mmc_gpio_free_cd(mmc);
 
 	if (!host->native_hotplug)
 		pm_runtime_get_sync(&pdev->dev);

include/linux/mfd/tmio.h

@@ -101,6 +101,7 @@ struct tmio_mmc_host;
 struct tmio_mmc_data {
 	unsigned int			hclk;
 	unsigned long			capabilities;
+	unsigned long			capabilities2;
 	unsigned long			flags;
 	u32				ocr_mask;	/* available voltages */
 	struct tmio_mmc_dma		*dma;
@@ -110,6 +111,9 @@ struct tmio_mmc_data {
 	void (*set_clk_div)(struct platform_device *host, int state);
 	int (*get_cd)(struct platform_device *host);
 	int (*write16_hook)(struct tmio_mmc_host *host, int addr);
+	/* clock management callbacks */
+	int (*clk_enable)(struct platform_device *pdev, unsigned int *f);
+	void (*clk_disable)(struct platform_device *pdev);
 };
 
 /*

include/linux/mmc/card.h

@@ -149,6 +149,7 @@ struct sd_switch_caps {
 #define SD_SET_CURRENT_LIMIT_400	1
 #define SD_SET_CURRENT_LIMIT_600	2
 #define SD_SET_CURRENT_LIMIT_800	3
+#define SD_SET_CURRENT_NO_CHANGE	(-1)
 
 #define SD_MAX_CURRENT_200	(1 << SD_SET_CURRENT_LIMIT_200)
 #define SD_MAX_CURRENT_400	(1 << SD_SET_CURRENT_LIMIT_400)

include/linux/mmc/host.h

@@ -11,6 +11,7 @@
 #define LINUX_MMC_HOST_H
 
 #include <linux/leds.h>
+#include <linux/mutex.h>
 #include <linux/sched.h>
 #include <linux/device.h>
 #include <linux/fault-inject.h>
@@ -150,11 +151,31 @@ struct mmc_async_req {
 	int (*err_check) (struct mmc_card *, struct mmc_async_req *);
 };
 
-struct mmc_hotplug {
-	unsigned int irq;
+/**
+ * struct mmc_slot - MMC slot functions
+ *
+ * @cd_irq:		MMC/SD-card slot hotplug detection IRQ or -EINVAL
+ * @lock:		protect the @handler_priv pointer
+ * @handler_priv:	MMC/SD-card slot context
+ *
+ * Some MMC/SD host controllers implement slot-functions like card and
+ * write-protect detection natively. However, a large number of controllers
+ * leave these functions to the CPU. This struct provides a hook to attach
+ * such slot-function drivers.
+ */
+struct mmc_slot {
+	int cd_irq;
+	struct mutex lock;
 	void *handler_priv;
 };
 
+struct regulator;
+
+struct mmc_supply {
+	struct regulator *vmmc;		/* Card power supply */
+	struct regulator *vqmmc;	/* Optional Vccq supply */
+};
+
 struct mmc_host {
 	struct device		*parent;
 	struct device		class_dev;
@@ -168,6 +189,9 @@ struct mmc_host {
 	u32			ocr_avail_sd;	/* SD-specific OCR */
 	u32			ocr_avail_mmc;	/* MMC-specific OCR */
 	struct notifier_block	pm_notify;
+	u32			max_current_330;
+	u32			max_current_300;
+	u32			max_current_180;
 
 #define MMC_VDD_165_195		0x00000080	/* VDD voltage 1.65 - 1.95 */
 #define MMC_VDD_20_21		0x00000100	/* VDD voltage 2.0 ~ 2.1 */
@@ -211,16 +235,9 @@ struct mmc_host {
 #define MMC_CAP_UHS_SDR50	(1 << 17)	/* Host supports UHS SDR50 mode */
 #define MMC_CAP_UHS_SDR104	(1 << 18)	/* Host supports UHS SDR104 mode */
 #define MMC_CAP_UHS_DDR50	(1 << 19)	/* Host supports UHS DDR50 mode */
-#define MMC_CAP_SET_XPC_330	(1 << 20)	/* Host supports >150mA current at 3.3V */
-#define MMC_CAP_SET_XPC_300	(1 << 21)	/* Host supports >150mA current at 3.0V */
-#define MMC_CAP_SET_XPC_180	(1 << 22)	/* Host supports >150mA current at 1.8V */
 #define MMC_CAP_DRIVER_TYPE_A	(1 << 23)	/* Host supports Driver Type A */
 #define MMC_CAP_DRIVER_TYPE_C	(1 << 24)	/* Host supports Driver Type C */
 #define MMC_CAP_DRIVER_TYPE_D	(1 << 25)	/* Host supports Driver Type D */
-#define MMC_CAP_MAX_CURRENT_200	(1 << 26)	/* Host max current limit is 200mA */
-#define MMC_CAP_MAX_CURRENT_400	(1 << 27)	/* Host max current limit is 400mA */
-#define MMC_CAP_MAX_CURRENT_600	(1 << 28)	/* Host max current limit is 600mA */
-#define MMC_CAP_MAX_CURRENT_800	(1 << 29)	/* Host max current limit is 800mA */
 #define MMC_CAP_CMD23		(1 << 30)	/* CMD23 supported. */
 #define MMC_CAP_HW_RESET	(1 << 31)	/* Hardware reset */
 
@@ -238,6 +255,8 @@ struct mmc_host {
 #define MMC_CAP2_BROKEN_VOLTAGE	(1 << 7)	/* Use the broken voltage */
 #define MMC_CAP2_DETECT_ON_ERR	(1 << 8)	/* On I/O err check card removal */
 #define MMC_CAP2_HC_ERASE_SZ	(1 << 9)	/* High-capacity erase size */
+#define MMC_CAP2_CD_ACTIVE_HIGH	(1 << 10)	/* Card-detect signal active high */
+#define MMC_CAP2_RO_ACTIVE_HIGH	(1 << 11)	/* Write-protect signal active high */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 	unsigned int        power_notify_type;
@@ -290,7 +309,7 @@ struct mmc_host {
 
 	struct delayed_work	detect;
 	int			detect_change;	/* card detect flag */
-	struct mmc_hotplug	hotplug;
+	struct mmc_slot		slot;
 
 	const struct mmc_bus_ops *bus_ops;	/* current bus driver */
 	unsigned int		bus_refs;	/* reference counter */
@@ -309,6 +328,7 @@ struct mmc_host {
 #ifdef CONFIG_REGULATOR
 	bool			regulator_enabled; /* regulator state */
 #endif
+	struct mmc_supply	supply;
 
 	struct dentry		*debugfs_root;
 
@@ -357,13 +377,12 @@ static inline void mmc_signal_sdio_irq(struct mmc_host *host)
 	wake_up_process(host->sdio_irq_thread);
 }
 
-struct regulator;
-
 #ifdef CONFIG_REGULATOR
 int mmc_regulator_get_ocrmask(struct regulator *supply);
 int mmc_regulator_set_ocr(struct mmc_host *mmc,
 			struct regulator *supply,
 			unsigned short vdd_bit);
+int mmc_regulator_get_supply(struct mmc_host *mmc);
 #else
 static inline int mmc_regulator_get_ocrmask(struct regulator *supply)
 {
@@ -376,6 +395,11 @@ static inline int mmc_regulator_set_ocr(struct mmc_host *mmc,
 {
 	return 0;
 }
+
+static inline int mmc_regulator_get_supply(struct mmc_host *mmc)
+{
+	return 0;
+}
 #endif
 
 int mmc_card_awake(struct mmc_host *host);

include/linux/mmc/sdhci.h

@@ -122,6 +122,7 @@ struct sdhci_host {
 #define SDHCI_PV_ENABLED	(1<<8)	/* Preset value enabled */
 #define SDHCI_SDIO_IRQ_ENABLED	(1<<9)	/* SDIO irq enabled */
 #define SDHCI_HS200_NEEDS_TUNING (1<<10)	/* HS200 needs tuning */
+#define SDHCI_USING_RETUNING_TIMER (1<<11)	/* Host is using a retuning timer for the card */
 
 	unsigned int version;	/* SDHCI spec. version */
 
@@ -155,7 +156,8 @@ struct sdhci_host {
 
 	struct timer_list timer;	/* Timer for timeouts */
 
-	unsigned int caps;	/* Alternative capabilities */
+	unsigned int caps;	/* Alternative CAPABILITY_0 */
+	unsigned int caps1;	/* Alternative CAPABILITY_1 */
 
 	unsigned int            ocr_avail_sdio;	/* OCR bit masks */
 	unsigned int            ocr_avail_sd;

include/linux/mmc/sh_mmcif.h

@@ -44,6 +44,8 @@ struct sh_mmcif_plat_data {
 	struct sh_mmcif_dma	*dma;		/* Deprecated. Instead */
 	unsigned int		slave_id_tx;	/* use embedded slave_id_[tr]x */
 	unsigned int		slave_id_rx;
+	bool			use_cd_gpio : 1;
+	unsigned int		cd_gpio;
 	u8			sup_pclk;	/* 1 :SH7757, 0: SH7724/SH7372 */
 	unsigned long		caps;
 	u32			ocr;

include/linux/mmc/sh_mobile_sdhi.h

@@ -23,6 +23,7 @@ struct sh_mobile_sdhi_info {
 	int dma_slave_rx;
 	unsigned long tmio_flags;
 	unsigned long tmio_caps;
+	unsigned long tmio_caps2;
 	u32 tmio_ocr_mask;	/* available MMC voltages */
 	unsigned int cd_gpio;
 	struct tmio_mmc_data *pdata;

include/linux/mmc/cd-gpio.h → include/linux/mmc/slot-gpio.h

@@ -8,11 +8,17 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef MMC_CD_GPIO_H
-#define MMC_CD_GPIO_H
+#ifndef MMC_SLOT_GPIO_H
+#define MMC_SLOT_GPIO_H
 
 struct mmc_host;
-int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio);
-void mmc_cd_gpio_free(struct mmc_host *host);
+
+int mmc_gpio_get_ro(struct mmc_host *host);
+int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio);
+void mmc_gpio_free_ro(struct mmc_host *host);
+
+int mmc_gpio_get_cd(struct mmc_host *host);
+int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio);
+void mmc_gpio_free_cd(struct mmc_host *host);
 
 #endif