[PATCH] libata: ata_scsi_slave_config cleanup

Encapsulate some of ata_scsi_slave_config so that parts
can be reused in future SAS patches.
Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/scsi/libata-scsi.c

@@ -662,6 +662,41 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
 	}
 }
 
+static void ata_scsi_sdev_config(struct scsi_device *sdev)
+{
+	sdev->use_10_for_rw = 1;
+	sdev->use_10_for_ms = 1;
+}
+
+static void ata_scsi_dev_config(struct scsi_device *sdev,
+				struct ata_device *dev)
+{
+	unsigned int max_sectors;
+
+	/* TODO: 2048 is an arbitrary number, not the
+	 * hardware maximum.  This should be increased to
+	 * 65534 when Jens Axboe's patch for dynamically
+	 * determining max_sectors is merged.
+	 */
+	max_sectors = ATA_MAX_SECTORS;
+	if (dev->flags & ATA_DFLAG_LBA48)
+		max_sectors = 2048;
+	if (dev->max_sectors)
+		max_sectors = dev->max_sectors;
+
+	blk_queue_max_sectors(sdev->request_queue, max_sectors);
+
+	/*
+	 * SATA DMA transfers must be multiples of 4 byte, so
+	 * we need to pad ATAPI transfers using an extra sg.
+	 * Decrement max hw segments accordingly.
+	 */
+	if (dev->class == ATA_DEV_ATAPI) {
+		request_queue_t *q = sdev->request_queue;
+		blk_queue_max_hw_segments(q, q->max_hw_segments - 1);
+	}
+}
+
 /**
  *	ata_scsi_slave_config - Set SCSI device attributes
  *	@sdev: SCSI device to examine
@@ -676,41 +711,18 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
 
 int ata_scsi_slave_config(struct scsi_device *sdev)
 {
-	sdev->use_10_for_rw = 1;
-	sdev->use_10_for_ms = 1;
+	ata_scsi_sdev_config(sdev);
 
 	blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD);
 
 	if (sdev->id < ATA_MAX_DEVICES) {
 		struct ata_port *ap;
 		struct ata_device *dev;
-		unsigned int max_sectors;
 
 		ap = (struct ata_port *) &sdev->host->hostdata[0];
 		dev = &ap->device[sdev->id];
 
-		/* TODO: 2048 is an arbitrary number, not the
-		 * hardware maximum.  This should be increased to
-		 * 65534 when Jens Axboe's patch for dynamically
-		 * determining max_sectors is merged.
-		 */
-		max_sectors = ATA_MAX_SECTORS;
-		if (dev->flags & ATA_DFLAG_LBA48)
-			max_sectors = 2048;
-		if (dev->max_sectors)
-			max_sectors = dev->max_sectors;
-
-		blk_queue_max_sectors(sdev->request_queue, max_sectors);
-
-		/*
-		 * SATA DMA transfers must be multiples of 4 byte, so
-		 * we need to pad ATAPI transfers using an extra sg.
-		 * Decrement max hw segments accordingly.
-		 */
-		if (dev->class == ATA_DEV_ATAPI) {
-			request_queue_t *q = sdev->request_queue;
-			blk_queue_max_hw_segments(q, q->max_hw_segments - 1);
-		}
+		ata_scsi_dev_config(sdev, dev);
 	}
 
 	return 0;	/* scsi layer doesn't check return value, sigh */