Commit a708fb7b authored by Erez Alfasi's avatar Erez Alfasi Committed by Saeed Mahameed

net/mlx5e: ethtool, Add support for EEPROM high pages query

Add the support to read additional EEPROM information from high pages.
Information for modules such as SFF-8436 and SFF-8636:
 1) Application select table
 2) User writable EEPROM
 3) Thresholds and alarms
Signed-off-by: default avatarErez Alfasi <ereza@mellanox.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
parent 0e1a2a3e
......@@ -1561,7 +1561,7 @@ static int mlx5e_get_module_info(struct net_device *netdev,
struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5_core_dev *dev = priv->mdev;
int size_read = 0;
u8 data[4];
u8 data[4] = {0};
size_read = mlx5_query_module_eeprom(dev, 0, 2, data);
if (size_read < 2)
......@@ -1571,17 +1571,17 @@ static int mlx5e_get_module_info(struct net_device *netdev,
switch (data[0]) {
case MLX5_MODULE_ID_QSFP:
modinfo->type = ETH_MODULE_SFF_8436;
modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
break;
case MLX5_MODULE_ID_QSFP_PLUS:
case MLX5_MODULE_ID_QSFP28:
/* data[1] = revision id */
if (data[0] == MLX5_MODULE_ID_QSFP28 || data[1] >= 0x3) {
modinfo->type = ETH_MODULE_SFF_8636;
modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
modinfo->eeprom_len = ETH_MODULE_SFF_8636_MAX_LEN;
} else {
modinfo->type = ETH_MODULE_SFF_8436;
modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
}
break;
case MLX5_MODULE_ID_SFP:
......
......@@ -293,15 +293,36 @@ static int mlx5_query_module_num(struct mlx5_core_dev *dev, int *module_num)
return 0;
}
static int mlx5_eeprom_page(int offset)
{
if (offset < MLX5_EEPROM_PAGE_LENGTH)
/* Addresses between 0-255 - page 00 */
return 0;
/* Addresses between 256 - 639 belongs to pages 01, 02 and 03
* For example, offset = 400 belongs to page 02:
* 1 + ((400 - 256)/128) = 2
*/
return 1 + ((offset - MLX5_EEPROM_PAGE_LENGTH) /
MLX5_EEPROM_HIGH_PAGE_LENGTH);
}
static int mlx5_eeprom_high_page_offset(int page_num)
{
if (!page_num) /* Page 0 always start from low page */
return 0;
/* High page */
return page_num * MLX5_EEPROM_HIGH_PAGE_LENGTH;
}
int mlx5_query_module_eeprom(struct mlx5_core_dev *dev,
u16 offset, u16 size, u8 *data)
{
int module_num, page_num, status, err;
u32 out[MLX5_ST_SZ_DW(mcia_reg)];
u32 in[MLX5_ST_SZ_DW(mcia_reg)];
int module_num;
u16 i2c_addr;
int status;
int err;
void *ptr = MLX5_ADDR_OF(mcia_reg, out, dword_0);
err = mlx5_query_module_num(dev, &module_num);
......@@ -311,8 +332,15 @@ int mlx5_query_module_eeprom(struct mlx5_core_dev *dev,
memset(in, 0, sizeof(in));
size = min_t(int, size, MLX5_EEPROM_MAX_BYTES);
if (offset < MLX5_EEPROM_PAGE_LENGTH &&
offset + size > MLX5_EEPROM_PAGE_LENGTH)
/* Get the page number related to the given offset */
page_num = mlx5_eeprom_page(offset);
/* Set the right offset according to the page number,
* For page_num > 0, relative offset is always >= 128 (high page).
*/
offset -= mlx5_eeprom_high_page_offset(page_num);
if (offset + size > MLX5_EEPROM_PAGE_LENGTH)
/* Cross pages read, read until offset 256 in low page */
size -= offset + size - MLX5_EEPROM_PAGE_LENGTH;
......@@ -321,7 +349,7 @@ int mlx5_query_module_eeprom(struct mlx5_core_dev *dev,
MLX5_SET(mcia_reg, in, l, 0);
MLX5_SET(mcia_reg, in, module, module_num);
MLX5_SET(mcia_reg, in, i2c_device_address, i2c_addr);
MLX5_SET(mcia_reg, in, page_number, 0);
MLX5_SET(mcia_reg, in, page_number, page_num);
MLX5_SET(mcia_reg, in, device_address, offset);
MLX5_SET(mcia_reg, in, size, size);
......
......@@ -60,6 +60,7 @@ enum mlx5_an_status {
#define MLX5_I2C_ADDR_LOW 0x50
#define MLX5_I2C_ADDR_HIGH 0x51
#define MLX5_EEPROM_PAGE_LENGTH 256
#define MLX5_EEPROM_HIGH_PAGE_LENGTH 128
enum mlx5e_link_mode {
MLX5E_1000BASE_CX_SGMII = 0,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment