Skip to content

L
linux
Commit a89d385d authored by Dan Murphy's avatar Dan Murphy Committed by Pavel Machek
Browse files
Options

dt-bindings: leds: Convert leds-lp55xx to yaml 

Convert the leds-lp55xx.txt to yaml binding.
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarDan Murphy <dmurphy@ti.com>
Signed-off-by: default avatarPavel Machek <pavel@ucw.cz>
parent 55d5d3b4
Hide whitespace changes
Inline Side-by-side
Showing with 220 additions and 228 deletions
Documentation/devicetree/bindings/leds/leds-lp55xx.txt deleted 100644 → 0
View file @ 55d5d3b4
Binding for TI/National Semiconductor LP55xx Led Drivers
Required properties:
- compatible: one of
national,lp5521
national,lp5523
ti,lp55231
ti,lp5562
ti,lp8501
- reg: I2C slave address
- clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
Each child has own specific current settings
- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
- max-cur: Maximun current at each led channel.
Optional properties:
- enable-gpio: GPIO attached to the chip's enable pin
- label: Used for naming LEDs
- pwr-sel: LP8501 specific property. Power selection for output channels.
0: D1~9 are connected to VDD
1: D1~6 with VDD, D7~9 with VOUT
2: D1~6 with VOUT, D7~9 with VDD
3: D1~9 are connected to VOUT
Alternatively, each child can have a specific channel name and trigger:
- chan-name (optional): name of channel
- linux,default-trigger (optional): see
Documentation/devicetree/bindings/leds/common.txt
example 1) LP5521
3 LED channels, external clock used. Channel names are 'lp5521_pri:channel0',
'lp5521_pri:channel1' and 'lp5521_pri:channel2', with a heartbeat trigger
on channel 0.
lp5521@32 {
compatible = "national,lp5521";
reg = <0x32>;
label = "lp5521_pri";
clock-mode = /bits/ 8 <2>;
chan0 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
linux,default-trigger = "heartbeat";
};
chan1 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
chan2 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
};
example 2) LP5523
9 LED channels with specific name. Internal clock used.
The I2C slave address is configurable with ASEL1 and ASEL0 pins.
Available addresses are 32/33/34/35h.
ASEL1 ASEL0 Address
-------------------------
GND GND 32h
GND VEN 33h
VEN GND 34h
VEN VEN 35h
lp5523@32 {
compatible = "national,lp5523";
reg = <0x32>;
clock-mode = /bits/ 8 <1>;
chan0 {
chan-name = "d1";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan1 {
chan-name = "d2";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan2 {
chan-name = "d3";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan3 {
chan-name = "d4";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan4 {
chan-name = "d5";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan5 {
chan-name = "d6";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan6 {
chan-name = "d7";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan7 {
chan-name = "d8";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan8 {
chan-name = "d9";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
};
example 3) LP5562
4 channels are defined.
lp5562@30 {
compatible = "ti,lp5562";
reg = <0x30>;
clock-mode = /bits/8 <2>;
chan0 {
chan-name = "R";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
chan1 {
chan-name = "G";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
chan2 {
chan-name = "B";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
chan3 {
chan-name = "W";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
};
example 4) LP8501
9 channels are defined. The 'pwr-sel' is LP8501 specific property.
Others are same as LP5523.
lp8501@32 {
compatible = "ti,lp8501";
reg = <0x32>;
clock-mode = /bits/ 8 <2>;
pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
chan0 {
chan-name = "d1";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan1 {
chan-name = "d2";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan2 {
chan-name = "d3";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan3 {
chan-name = "d4";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan4 {
chan-name = "d5";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan5 {
chan-name = "d6";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan6 {
chan-name = "d7";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan7 {
chan-name = "d8";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan8 {
chan-name = "d9";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
};
Documentation/devicetree/bindings/leds/leds-lp55xx.yaml 0 → 100644
View file @ a89d385d
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/leds/leds-lp55xx.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI/National Semiconductor LP55xx and LP8501 LED Drivers
maintainers:
- Jacek Anaszewski <jacek.anaszewski@gmail.com>
- Pavel Machek <pavel@ucw.cz>
description: |
Bindings for the TI/National Semiconductor LP55xx and LP8501 multi channel
LED Drivers.
For more product information please see the link below:
https://www.ti.com/lit/gpn/lp5521
https://www.ti.com/lit/gpn/lp5523
https://www.ti.com/lit/gpn/lp55231
https://www.ti.com/lit/gpn/lp5562
https://www.ti.com/lit/gpn/lp8501
properties:
compatible:
enum:
- national,lp5521
- national,lp5523
- ti,lp55231
- ti,lp5562
- ti,lp8501
reg:
maxItems: 1
description: I2C slave address
clock-mode:
$ref: /schemas/types.yaml#definitions/uint8
description: |
Input clock mode
enum:
- 0 # automode
- 1 # internal
- 2 # external
enable-gpio:
maxItems: 1
description: |
GPIO attached to the chip's enable pin
pwr-sel:
$ref: /schemas/types.yaml#definitions/uint8
description: |
LP8501 specific property. Power selection for output channels.
enum:
- 0 # D1~9 are connected to VDD
- 1 # D1~6 with VDD, D7~9 with VOUT
- 2 # D1~6 with VOUT, D7~9 with VDD
- 3 # D1~9 are connected to VOUT
patternProperties:
"(^led@[0-9a-f]$|led)":
type: object
$ref: common.yaml#
properties:
led-cur:
$ref: /schemas/types.yaml#definitions/uint8
description: |
Current setting at each LED channel (mA x10, 0 if LED is not connected)
minimum: 0
maximum: 255
max-cur:
$ref: /schemas/types.yaml#definitions/uint8
description: Maximun current at each LED channel.
reg:
description: |
Output channel for the LED. This is zero based channel identifier and
the data sheet is a one based channel identifier.
reg value to output to LED output number
enum:
- 0 # LED output D1
- 1 # LED output D2
- 2 # LED output D3
- 3 # LED output D4
- 4 # LED output D5
- 5 # LED output D6
- 6 # LED output D7
- 7 # LED output D8
- 8 # LED output D9
chan-name:
$ref: /schemas/types.yaml#definitions/string
description: name of channel
required:
- compatible
- reg
examples:
- |
#include <dt-bindings/leds/common.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
led-controller@32 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,lp8501";
reg = <0x32>;
clock-mode = /bits/ 8 <2>;
pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
led@0 {
reg = <0>;
chan-name = "d1";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
led@1 {
reg = <1>;
chan-name = "d2";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
led@2 {
reg = <2>;
chan-name = "d3";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
led@3 {
reg = <3>;
chan-name = "d4";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
led@4 {
reg = <4>;
chan-name = "d5";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
led@5 {
reg = <5>;
chan-name = "d6";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
led@6 {
reg = <6>;
chan-name = "d7";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
led@7 {
reg = <7>;
chan-name = "d8";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
led@8 {
reg = <8>;
chan-name = "d9";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
};
led-controller@33 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "national,lp5523";
reg = <0x33>;
clock-mode = /bits/ 8 <0>;
multi-led@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
color = <LED_COLOR_ID_MULTI>;
function = LED_FUNCTION_STANDBY;
linux,default-trigger = "heartbeat";
led@0 {
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
reg = <0x0>;
color = <LED_COLOR_ID_GREEN>;
};
led@1 {
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
reg = <0x1>;
color = <LED_COLOR_ID_BLUE>;
};
led@6 {
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
reg = <0x6>;
color = <LED_COLOR_ID_RED>;
};
};
};
};
...
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7