Commit a93f3e9f authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'x86-geode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

* 'x86-geode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: geode: New PCEngines Alix system driver
parents 107095a9 d4f3e350
......@@ -2066,6 +2066,20 @@ config OLPC_XO15_SCI
- AC adapter status updates
- Battery status updates
config ALIX
bool "PCEngines ALIX System Support (LED setup)"
select GPIOLIB
---help---
This option enables system support for the PCEngines ALIX.
At present this just sets up LEDs for GPIO control on
ALIX2/3/6 boards. However, other system specific setup should
get added here.
Note: You must still enable the drivers for GPIO and LED support
(GPIO_CS5535 & LEDS_GPIO) to actually use the LEDs
Note: You have to set alix.force=1 for boards with Award BIOS.
endif # X86_32
config AMD_NB
......
# Platform specific code goes here
obj-y += ce4100/
obj-y += efi/
obj-y += geode/
obj-y += iris/
obj-y += mrst/
obj-y += olpc/
......
obj-$(CONFIG_ALIX) += alix.o
/*
* LEDs driver for PCEngines ALIX.2 and ALIX.3
* System Specific setup for PCEngines ALIX.
* At the moment this means setup of GPIO control of LEDs
* on Alix.2/3/6 boards.
*
*
* Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
* Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com>
*
* TODO: There are large similarities with leds-net5501.c
* by Alessandro Zummo <a.zummo@towertech.it>
* In the future leds-net5501.c should be migrated over to platform
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/string.h>
#include <linux/module.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/gpio.h>
#include <asm/geode.h>
static int force = 0;
module_param(force, bool, 0444);
MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs");
#define MSR_LBAR_GPIO 0x5140000C
#define CS5535_GPIO_SIZE 256
static u32 gpio_base;
static struct pci_device_id divil_pci[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
{ } /* NULL entry */
};
MODULE_DEVICE_TABLE(pci, divil_pci);
/* FIXME: Award bios is not automatically detected as Alix platform */
MODULE_PARM_DESC(force, "Force detection as ALIX.2/ALIX.3 platform");
struct alix_led {
struct led_classdev cdev;
unsigned short port;
unsigned int on_value;
unsigned int off_value;
};
static void alix_led_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
struct alix_led *led_dev =
container_of(led_cdev, struct alix_led, cdev);
if (brightness)
outl(led_dev->on_value, gpio_base + led_dev->port);
else
outl(led_dev->off_value, gpio_base + led_dev->port);
}
static struct alix_led alix_leds[] = {
static struct gpio_led alix_leds[] = {
{
.cdev = {
.name = "alix:1",
.brightness_set = alix_led_set,
},
.port = 0x00,
.on_value = 1 << 22,
.off_value = 1 << 6,
.name = "alix:1",
.gpio = 6,
.default_trigger = "default-on",
.active_low = 1,
},
{
.cdev = {
.name = "alix:2",
.brightness_set = alix_led_set,
},
.port = 0x80,
.on_value = 1 << 25,
.off_value = 1 << 9,
.name = "alix:2",
.gpio = 25,
.default_trigger = "default-off",
.active_low = 1,
},
{
.cdev = {
.name = "alix:3",
.brightness_set = alix_led_set,
},
.port = 0x80,
.on_value = 1 << 27,
.off_value = 1 << 11,
.name = "alix:3",
.gpio = 27,
.default_trigger = "default-off",
.active_low = 1,
},
};
static int __init alix_led_probe(struct platform_device *pdev)
{
int i;
int ret;
for (i = 0; i < ARRAY_SIZE(alix_leds); i++) {
alix_leds[i].cdev.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&pdev->dev, &alix_leds[i].cdev);
if (ret < 0)
goto fail;
}
return 0;
static struct gpio_led_platform_data alix_leds_data = {
.num_leds = ARRAY_SIZE(alix_leds),
.leds = alix_leds,
};
fail:
while (--i >= 0)
led_classdev_unregister(&alix_leds[i].cdev);
return ret;
}
static struct platform_device alix_leds_dev = {
.name = "leds-gpio",
.id = -1,
.dev.platform_data = &alix_leds_data,
};
static int alix_led_remove(struct platform_device *pdev)
static void __init register_alix(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(alix_leds); i++)
led_classdev_unregister(&alix_leds[i].cdev);
return 0;
/* Setup LED control through leds-gpio driver */
platform_device_register(&alix_leds_dev);
}
static struct platform_driver alix_led_driver = {
.remove = alix_led_remove,
.driver = {
.name = KBUILD_MODNAME,
.owner = THIS_MODULE,
},
};
static int __init alix_present(unsigned long bios_phys,
const char *alix_sig,
size_t alix_sig_len)
......@@ -126,7 +82,7 @@ static int __init alix_present(unsigned long bios_phys,
if (force) {
printk(KERN_NOTICE "%s: forced to skip BIOS test, "
"assume system has ALIX.2 style LEDs\n",
"assume system is ALIX.2/ALIX.3\n",
KBUILD_MODNAME);
return 1;
}
......@@ -164,76 +120,23 @@ static int __init alix_present(unsigned long bios_phys,
return 0;
}
static struct platform_device *pdev;
static int __init alix_pci_led_init(void)
{
u32 low, hi;
if (pci_dev_present(divil_pci) == 0) {
printk(KERN_WARNING KBUILD_MODNAME": DIVIL not found\n");
return -ENODEV;
}
/* Grab the GPIO I/O range */
rdmsr(MSR_LBAR_GPIO, low, hi);
/* Check the mask and whether GPIO is enabled (sanity check) */
if (hi != 0x0000f001) {
printk(KERN_WARNING KBUILD_MODNAME": GPIO not enabled\n");
return -ENODEV;
}
/* Mask off the IO base address */
gpio_base = low & 0x0000ff00;
if (!request_region(gpio_base, CS5535_GPIO_SIZE, KBUILD_MODNAME)) {
printk(KERN_ERR KBUILD_MODNAME": can't allocate I/O for GPIO\n");
return -ENODEV;
}
/* Set GPIO function to output */
outl(1 << 6, gpio_base + 0x04);
outl(1 << 9, gpio_base + 0x84);
outl(1 << 11, gpio_base + 0x84);
return 0;
}
static int __init alix_led_init(void)
static int __init alix_init(void)
{
int ret = -ENODEV;
const char tinybios_sig[] = "PC Engines ALIX.";
const char coreboot_sig[] = "PC Engines\0ALIX.";
if (!is_geode())
return 0;
if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) ||
alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1))
ret = alix_pci_led_init();
register_alix();
if (ret < 0)
return ret;
pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
if (!IS_ERR(pdev)) {
ret = platform_driver_probe(&alix_led_driver, alix_led_probe);
if (ret)
platform_device_unregister(pdev);
} else
ret = PTR_ERR(pdev);
return ret;
}
static void __exit alix_led_exit(void)
{
platform_device_unregister(pdev);
platform_driver_unregister(&alix_led_driver);
release_region(gpio_base, CS5535_GPIO_SIZE);
return 0;
}
module_init(alix_led_init);
module_exit(alix_led_exit);
module_init(alix_init);
MODULE_AUTHOR("Constantin Baranov <const@mimas.ru>");
MODULE_DESCRIPTION("PCEngines ALIX.2 and ALIX.3 LED driver");
MODULE_AUTHOR("Ed Wildgoose <kernel@wildgooses.com>");
MODULE_DESCRIPTION("PCEngines ALIX System Setup");
MODULE_LICENSE("GPL");
......@@ -113,14 +113,6 @@ config LEDS_WRAP
help
This option enables support for the PCEngines WRAP programmable LEDs.
config LEDS_ALIX2
tristate "LED Support for ALIX.2 and ALIX.3 series"
depends on LEDS_CLASS
depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
help
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
You have to set leds-alix2.force=1 for boards with Award BIOS.
config LEDS_COBALT_QUBE
tristate "LED Support for the Cobalt Qube series front LED"
depends on LEDS_CLASS
......
......@@ -16,7 +16,6 @@ obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
obj-$(CONFIG_LEDS_NET5501) += leds-net5501.o
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
obj-$(CONFIG_LEDS_ALIX2) += leds-alix2.o
obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment