Skip to content

L
linux
Commit a9762b70 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

usb: musb: remove blackfin port 

The blackfin architecture is getting removed, so we can clean up
all the special cases in the musb driver.
Acked-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: default avatarAaron Wu <aaron.wu@analog.com>
Acked-by: default avatarBin Liu <b-liu@ti.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
[arnd: adding in fixups from Aaron and Stephen]
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 03f4c9ab
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 13 additions and 1096 deletions
Documentation/driver-api/usb/writing_musb_glue_layer.rst
View file @ a9762b70
......@@ -718,6 +718,3 @@ http://www.maximintegrated.com/app-notes/index.mvp/id/1822
Texas Instruments USB Configuration Wiki Page:
http://processors.wiki.ti.com/index.php/Usbgeneralpage
Analog Devices Blackfin MUSB Configuration:
http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:musb
drivers/usb/musb/Kconfig
View file @ a9762b70
......@@ -5,7 +5,7 @@
# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
config USB_MUSB_HDRC
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, AW, ...)'
tristate 'Inventra Highspeed Dual Role Controller'
depends on (USB || USB_GADGET)
depends on HAS_IOMEM
help
......@@ -18,9 +18,6 @@ config USB_MUSB_HDRC
Texas Instruments families using this IP include DaVinci
(35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
Analog Devices parts using this IP include Blackfin BF54x,
BF525 and BF527.
Allwinner SoCs using this IP include A10, A13, A20, ...
If you do not know what this is, please say N.
......@@ -107,11 +104,6 @@ config USB_MUSB_DSPS
depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on OF_IRQ
config USB_MUSB_BLACKFIN
tristate "Blackfin"
depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
depends on NOP_USB_XCEIV
config USB_MUSB_UX500
tristate "Ux500 platforms"
depends on ARCH_U8500 || COMPILE_TEST
......@@ -149,7 +141,7 @@ config USB_UX500_DMA
config USB_INVENTRA_DMA
bool 'Inventra'
depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
depends on USB_MUSB_OMAP2PLUS
help
Enable DMA transfers using Mentor's engine.
......
drivers/usb/musb/Makefile
View file @ a9762b70
......@@ -21,7 +21,6 @@ obj-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o
obj-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o
obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o
obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o
obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o
obj-$(CONFIG_USB_MUSB_UX500) += ux500.o
obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o
obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o
......
drivers/usb/musb/blackfin.c deleted 100644 → 0
View file @ 03f4c9ab
This diff is collapsed.
drivers/usb/musb/blackfin.h deleted 100644 → 0
View file @ 03f4c9ab
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2007 by Analog Devices, Inc.
*/
#ifndef __MUSB_BLACKFIN_H__
#define __MUSB_BLACKFIN_H__
/*
* Blackfin specific definitions
*/
/* Anomalies notes:
*
* 05000450 - USB DMA Mode 1 Short Packet Data Corruption:
* MUSB driver is designed to transfer buffer of N * maxpacket size
* in DMA mode 1 and leave the rest of the data to the next
* transfer in DMA mode 0, so we never transmit a short packet in
* DMA mode 1.
*
* 05000463 - This anomaly doesn't affect this driver since it
* never uses L1 or L2 memory as data destination.
*
* 05000464 - This anomaly doesn't affect this driver since it
* never uses L1 or L2 memory as data source.
*
* 05000465 - The anomaly can be seen when SCLK is over 100 MHz, and there is
* no way to workaround for bulk endpoints. Since the wMaxPackSize
* of bulk is less than or equal to 512, while the fifo size of
* endpoint 5, 6, 7 is 1024, the double buffer mode is enabled
* automatically when these endpoints are used for bulk OUT.
*
* 05000466 - This anomaly doesn't affect this driver since it never mixes
* concurrent DMA and core accesses to the TX endpoint FIFOs.
*
* 05000467 - The workaround for this anomaly will introduce another
* anomaly - 05000465.
*/
/* The Mentor USB DMA engine on BF52x (silicon v0.0 and v0.1) seems to be
* unstable in host mode. This may be caused by Anomaly 05000380. After
* digging out the root cause, we will change this number accordingly.
* So, need to either use silicon v0.2+ or disable DMA mode in MUSB.
*/
#if ANOMALY_05000380 && defined(CONFIG_BF52x) && \
!defined(CONFIG_MUSB_PIO_ONLY)
# error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1"
#endif
#undef DUMP_FIFO_DATA
#ifdef DUMP_FIFO_DATA
static void dump_fifo_data(u8 *buf, u16 len)
{
u8 *tmp = buf;
int i;
for (i = 0; i < len; i++) {
if (!(i % 16) && i)
pr_debug("\n");
pr_debug("%02x ", *tmp++);
}
pr_debug("\n");
}
#else
#define dump_fifo_data(buf, len) do {} while (0)
#endif
#define USB_DMA_BASE USB_DMA_INTERRUPT
#define USB_DMAx_CTRL 0x04
#define USB_DMAx_ADDR_LOW 0x08
#define USB_DMAx_ADDR_HIGH 0x0C
#define USB_DMAx_COUNT_LOW 0x10
#define USB_DMAx_COUNT_HIGH 0x14
#define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg)
/* Almost 1 second */
#define TIMER_DELAY (1 * HZ)
#endif /* __MUSB_BLACKFIN_H__ */
drivers/usb/musb/musb_core.c
View file @ a9762b70
......@@ -126,7 +126,6 @@ EXPORT_SYMBOL_GPL(musb_get_mode);
/*-------------------------------------------------------------------------*/
#ifndef CONFIG_BLACKFIN
static int musb_ulpi_read(struct usb_phy *phy, u32 reg)
{
void __iomem *addr = phy->io_priv;
......@@ -208,10 +207,6 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
return ret;
}
#else
#define musb_ulpi_read NULL
#define musb_ulpi_write NULL
#endif
static struct usb_phy_io_ops musb_ulpi_access = {
.read = musb_ulpi_read,
......@@ -2171,7 +2166,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
* - initializes musb->xceiv, usually by otg_get_phy()
* - stops powering VBUS
*
* There are various transceiver configurations. Blackfin,
* There are various transceiver configurations.
* DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
* external/discrete ones in various flavors (twl4030 family,
* isp1504, non-OTG, etc) mostly hooking up through ULPI.
......
drivers/usb/musb/musb_core.h
View file @ a9762b70
......@@ -414,19 +414,6 @@ struct musb {
struct usb_gadget_driver *gadget_driver; /* its driver */
struct usb_hcd *hcd; /* the usb hcd */
/*
* FIXME: Remove this flag.
*
* This is only added to allow Blackfin to work
* with current driver. For some unknown reason
* Blackfin doesn't work with double buffering
* and that's enabled by default.
*
* We added this flag to forcefully disable double
* buffering until we get it working.
*/
unsigned double_buffer_not_ok:1;
const struct musb_hdrc_config *config;
int xceiv_old_state;
......@@ -467,34 +454,6 @@ static inline char *musb_ep_xfertype_string(u8 type)
return s;
}
#ifdef CONFIG_BLACKFIN
static inline int musb_read_fifosize(struct musb *musb,
struct musb_hw_ep *hw_ep, u8 epnum)
{
musb->nr_endpoints++;
musb->epmask |= (1 << epnum);
if (epnum < 5) {
hw_ep->max_packet_sz_tx = 128;
hw_ep->max_packet_sz_rx = 128;
} else {
hw_ep->max_packet_sz_tx = 1024;
hw_ep->max_packet_sz_rx = 1024;
}
hw_ep->is_shared_fifo = false;
return 0;
}
static inline void musb_configure_ep0(struct musb *musb)
{
musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
musb->endpoints[0].is_shared_fifo = true;
}
#else
static inline int musb_read_fifosize(struct musb *musb,
struct musb_hw_ep *hw_ep, u8 epnum)
{
......@@ -531,8 +490,6 @@ static inline void musb_configure_ep0(struct musb *musb)
musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
musb->endpoints[0].is_shared_fifo = true;
}
#endif /* CONFIG_BLACKFIN */
/***************************** Glue it together *****************************/
......
drivers/usb/musb/musb_debugfs.c
View file @ a9762b70
......@@ -70,7 +70,6 @@ static const struct musb_register_map musb_regmap[] = {
{ "DMA_CNTLch7", 0x274, 16 },
{ "DMA_ADDRch7", 0x278, 32 },
{ "DMA_COUNTch7", 0x27C, 32 },
#ifndef CONFIG_BLACKFIN
{ "ConfigData", MUSB_CONFIGDATA,8 },
{ "BabbleCtl", MUSB_BABBLE_CTL,8 },
{ "TxFIFOsz", MUSB_TXFIFOSZ, 8 },
......@@ -79,7 +78,6 @@ static const struct musb_register_map musb_regmap[] = {
{ "RxFIFOadd", MUSB_RXFIFOADD, 16 },
{ "EPInfo", MUSB_EPINFO, 8 },
{ "RAMInfo", MUSB_RAMINFO, 8 },
#endif
{ } /* Terminating Entry */
};
......
drivers/usb/musb/musb_dma.h
View file @ a9762b70
......@@ -80,17 +80,6 @@ struct musb_hw_ep;
#define is_cppi_enabled(musb) 0
#endif
/* Anomaly 05000456 - USB Receive Interrupt Is Not Generated in DMA Mode 1
* Only allow DMA mode 1 to be used when the USB will actually generate the
* interrupts we expect.
*/
#ifdef CONFIG_BLACKFIN
# undef USE_MODE1
# if !ANOMALY_05000456
# define USE_MODE1
# endif
#endif
/*
* DMA channel status ... updated by the dma controller driver whenever that
* status changes, and protected by the overall controller spinlock.
......
drivers/usb/musb/musb_gadget.c
View file @ a9762b70
......@@ -995,15 +995,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
/* Set TXMAXP with the FIFO size of the endpoint
* to disable double buffering mode.
*/
if (musb->double_buffer_not_ok) {
musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
} else {
if (can_bulk_split(musb, musb_ep->type))
musb_ep->hb_mult = (hw_ep->max_packet_sz_tx /
musb_ep->packet_sz) - 1;
musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
| (musb_ep->hb_mult << 11));
}
if (can_bulk_split(musb, musb_ep->type))
musb_ep->hb_mult = (hw_ep->max_packet_sz_tx /
musb_ep->packet_sz) - 1;
musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
| (musb_ep->hb_mult << 11));
csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
if (musb_readw(regs, MUSB_TXCSR)
......@@ -1038,11 +1034,8 @@ static int musb_gadget_enable(struct usb_ep *ep,
/* Set RXMAXP with the FIFO size of the endpoint
* to disable double buffering mode.
*/
if (musb->double_buffer_not_ok)
musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx);
else
musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
| (musb_ep->hb_mult << 11));
musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
| (musb_ep->hb_mult << 11));
/* force shared fifo to OUT-only mode */
if (hw_ep->is_shared_fifo) {
......@@ -1680,40 +1673,6 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
return 0;
}
#ifdef CONFIG_BLACKFIN
static struct usb_ep *musb_match_ep(struct usb_gadget *g,
struct usb_endpoint_descriptor *desc,
struct usb_ss_ep_comp_descriptor *ep_comp)
{
struct usb_ep *ep = NULL;
switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_ISOC:
case USB_ENDPOINT_XFER_BULK:
if (usb_endpoint_dir_in(desc))
ep = gadget_find_ep_by_name(g, "ep5in");
else
ep = gadget_find_ep_by_name(g, "ep6out");
break;
case USB_ENDPOINT_XFER_INT:
if (usb_endpoint_dir_in(desc))
ep = gadget_find_ep_by_name(g, "ep1in");
else
ep = gadget_find_ep_by_name(g, "ep2out");
break;
default:
break;
}
if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
return ep;
return NULL;
}
#else
#define musb_match_ep NULL
#endif
static int musb_gadget_start(struct usb_gadget *g,
struct usb_gadget_driver *driver);
static int musb_gadget_stop(struct usb_gadget *g);
......@@ -1727,7 +1686,6 @@ static const struct usb_gadget_ops musb_gadget_operations = {
.pullup = musb_gadget_pullup,
.udc_start = musb_gadget_start,
.udc_stop = musb_gadget_stop,
.match_ep = musb_match_ep,
};
/* ----------------------------------------------------------------------- */
......
drivers/usb/musb/musb_host.c
View file @ a9762b70
......@@ -574,11 +574,8 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum)
/* Set RXMAXP with the FIFO size of the endpoint
* to disable double buffer mode.
*/
if (musb->double_buffer_not_ok)
musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
else
musb_writew(ep->regs, MUSB_RXMAXP,
qh->maxpacket | ((qh->hb_mult - 1) << 11));
musb_writew(ep->regs, MUSB_RXMAXP,
qh->maxpacket | ((qh->hb_mult - 1) << 11));
ep->rx_reinit = 0;
}
......@@ -804,10 +801,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
/* protocol/endpoint/interval/NAKlimit */
if (epnum) {
musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
if (musb->double_buffer_not_ok) {
musb_writew(epio, MUSB_TXMAXP,
hw_ep->max_packet_sz_tx);
} else if (can_bulk_split(musb, qh->type)) {
if (can_bulk_split(musb, qh->type)) {
qh->hb_mult = hw_ep->max_packet_sz_tx
/ packet_sz;
musb_writew(epio, MUSB_TXMAXP, packet_sz
......
drivers/usb/musb/musb_regs.h
View file @ a9762b70
......@@ -195,8 +195,6 @@
#define MUSB_HUBADDR_MULTI_TT 0x80
#ifndef CONFIG_BLACKFIN
/*
* Common USB registers
*/
......@@ -416,184 +414,4 @@ static inline u8 musb_read_txhubport(struct musb *musb, u8 epnum)
musb->io.busctl_offset(epnum, MUSB_TXHUBPORT));
}
#else /* CONFIG_BLACKFIN */
#define USB_BASE USB_FADDR
#define USB_OFFSET(reg) (reg - USB_BASE)
/*
* Common USB registers
*/
#define MUSB_FADDR USB_OFFSET(USB_FADDR) /* 8-bit */
#define MUSB_POWER USB_OFFSET(USB_POWER) /* 8-bit */
#define MUSB_INTRTX USB_OFFSET(USB_INTRTX) /* 16-bit */
#define MUSB_INTRRX USB_OFFSET(USB_INTRRX)
#define MUSB_INTRTXE USB_OFFSET(USB_INTRTXE)
#define MUSB_INTRRXE USB_OFFSET(USB_INTRRXE)
#define MUSB_INTRUSB USB_OFFSET(USB_INTRUSB) /* 8 bit */
#define MUSB_INTRUSBE USB_OFFSET(USB_INTRUSBE)/* 8 bit */
#define MUSB_FRAME USB_OFFSET(USB_FRAME)
#define MUSB_INDEX USB_OFFSET(USB_INDEX) /* 8 bit */
#define MUSB_TESTMODE USB_OFFSET(USB_TESTMODE)/* 8 bit */
/*
* Additional Control Registers
*/
#define MUSB_DEVCTL USB_OFFSET(USB_OTG_DEV_CTL) /* 8 bit */
#define MUSB_LINKINFO USB_OFFSET(USB_LINKINFO)/* 8 bit */
#define MUSB_VPLEN USB_OFFSET(USB_VPLEN) /* 8 bit */
#define MUSB_HS_EOF1 USB_OFFSET(USB_HS_EOF1) /* 8 bit */
#define MUSB_FS_EOF1 USB_OFFSET(USB_FS_EOF1) /* 8 bit */
#define MUSB_LS_EOF1 USB_OFFSET(USB_LS_EOF1) /* 8 bit */
/* Offsets to endpoint registers */
#define MUSB_TXMAXP 0x00
#define MUSB_TXCSR 0x04
#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
#define MUSB_RXMAXP 0x08
#define MUSB_RXCSR 0x0C
#define MUSB_RXCOUNT 0x10
#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
#define MUSB_TXTYPE 0x14
#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
#define MUSB_TXINTERVAL 0x18
#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
#define MUSB_RXTYPE 0x1C
#define MUSB_RXINTERVAL 0x20
#define MUSB_TXCOUNT 0x28
/* Offsets to endpoint registers in indexed model (using INDEX register) */
#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
(0x40 + (_offset))
/* Offsets to endpoint registers in flat models */
#define MUSB_FLAT_OFFSET(_epnum, _offset) \
(USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
/* Not implemented - HW has separate Tx/Rx FIFO */
#define MUSB_TXCSR_MODE 0x0000
static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
{
}
static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
{
}
static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
{
}
static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
{
}
static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
{
}
static inline u8 musb_read_txfifosz(void __iomem *mbase)
{
return 0;
}
static inline u16 musb_read_txfifoadd(void __iomem *mbase)
{
return 0;
}
static inline u8 musb_read_rxfifosz(void __iomem *mbase)
{
return 0;
}
static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
{
return 0;
}
static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
{
return 0;
}
static inline u8 musb_read_configdata(void __iomem *mbase)
{
return 0;
}
static inline u16 musb_read_hwvers(void __iomem *mbase)
{
/*
* This register is invisible on Blackfin, actually the MUSB
* RTL version of Blackfin is 1.9, so just hardcode its value.
*/
return MUSB_HWVERS_1900;
}
static inline void musb_write_rxfunaddr(void __iomem *mbase, u8 epnum,
u8 qh_addr_req)
{
}
static inline void musb_write_rxhubaddr(void __iomem *mbase, u8 epnum,
u8 qh_h_addr_reg)
{
}
static inline void musb_write_rxhubport(void __iomem *mbase, u8 epnum,
u8 qh_h_port_reg)
{
}
static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
u8 qh_addr_reg)
{
}
static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
u8 qh_addr_reg)
{
}
static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
u8 qh_h_port_reg)
{
}
static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
{
return 0;
}
static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
{
return 0;
}
static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
{
return 0;
}
static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
{
return 0;
}
static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
{
return 0;
}
static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
{
return 0;
}
#endif /* CONFIG_BLACKFIN */
#endif /* __MUSB_REGS_H__ */
drivers/usb/musb/musbhsdma.c
View file @ a9762b70
......@@ -235,11 +235,6 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
#ifdef CONFIG_BLACKFIN
/* Clear DMA interrupt flags */
musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma);
#endif
if (!int_hsdma) {
musb_dbg(musb, "spurious DMA irq");
......
drivers/usb/musb/musbhsdma.h
View file @ a9762b70
......@@ -6,8 +6,6 @@
* Copyright (C) 2005-2007 by Texas Instruments
*/
#ifndef CONFIG_BLACKFIN
#define MUSB_HSDMA_BASE 0x200
#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
#define MUSB_HSDMA_CONTROL 0x4
......@@ -34,68 +32,6 @@
musb_writel(mbase, \
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \
len)
#else
#define MUSB_HSDMA_BASE 0x400
#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
#define MUSB_HSDMA_CONTROL 0x04
#define MUSB_HSDMA_ADDR_LOW 0x08
#define MUSB_HSDMA_ADDR_HIGH 0x0C
#define MUSB_HSDMA_COUNT_LOW 0x10
#define MUSB_HSDMA_COUNT_HIGH 0x14
#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
(MUSB_HSDMA_BASE + (_bchannel * 0x20) + _offset)
static inline u32 musb_read_hsdma_addr(void __iomem *mbase, u8 bchannel)
{
u32 addr = musb_readw(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH));
addr = addr << 16;
addr |= musb_readw(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW));
return addr;
}
static inline void musb_write_hsdma_addr(void __iomem *mbase,
u8 bchannel, dma_addr_t dma_addr)
{
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
dma_addr);
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
(dma_addr >> 16));
}
static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
{
u32 count = musb_readw(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
count = count << 16;
count |= musb_readw(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
return count;
}
static inline void musb_write_hsdma_count(void __iomem *mbase,
u8 bchannel, u32 len)
{
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len);
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
(len >> 16));
}
#endif /* CONFIG_BLACKFIN */
/* control register (16-bit): */
#define MUSB_HSDMA_ENABLE_SHIFT 0
#define MUSB_HSDMA_TRANSMIT_SHIFT 1
......
include/linux/usb/musb.h
View file @ a9762b70
......@@ -89,13 +89,6 @@ struct musb_hdrc_config {
u8 ram_bits; /* ram address size */
struct musb_hdrc_eps_bits *eps_bits __deprecated;
#ifdef CONFIG_BLACKFIN
/* A GPIO controlling VRSEL in Blackfin */
unsigned int gpio_vrsel;
unsigned int gpio_vrsel_active;
/* musb CLKIN in Blackfin in MHZ */
unsigned char clkin;
#endif
u32 maximum_speed;
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7