Commit a9fce7c9 authored by Bill Pemberton's avatar Bill Pemberton Committed by Greg Kroah-Hartman

Staging: comedi: Remove USHORT and *PUSHORT typedefs in addi-data

Signed-off-by: default avatarBill Pemberton <wfp5p@virginia.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 66673a7c
......@@ -37,7 +37,6 @@
#define SUCCESS 1
/* variable type definition */
typedef unsigned short USHORT, *PUSHORT;
typedef unsigned short WORD, *PWORD;
typedef int INT, *PINT;;
typedef unsigned int UINT, *PUINT;
......@@ -50,9 +49,9 @@ typedef const struct comedi_lrange *PCRANGE;
#define LOBYTE(W) (unsigned char)((W) & 0xFF)
#define HIBYTE(W) (unsigned char)(((W) >> 8) & 0xFF)
#define MAKEWORD(H, L) (USHORT)((L) | ((H) << 8))
#define LOWORD(W) (USHORT)((W) & 0xFFFF)
#define HIWORD(W) (USHORT)(((W) >> 16) & 0xFFFF)
#define MAKEWORD(H, L) (unsigned short)((L) | ((H) << 8))
#define LOWORD(W) (unsigned short)((W) & 0xFFFF)
#define HIWORD(W) (unsigned short)(((W) >> 16) & 0xFFFF)
#define MAKEDWORD(H, L) (UINT)((L) | ((H) << 16))
#define ADDI_ENABLE 1
......@@ -385,7 +384,7 @@ typedef struct {
UINT ui_AiDataLength;
short *AiData; // Pointer to sample data
UINT ui_AiNbrofScans; // number of scans to do
USHORT us_UseDma; // To use Dma or not
unsigned short us_UseDma; // To use Dma or not
unsigned char b_DmaDoubleBuffer; // we can use double buffering
UINT ui_DmaActualBuffer; // which buffer is used now
//*UPDATE-0.7.57->0.7.68
......@@ -402,7 +401,7 @@ typedef struct {
unsigned char b_AnalogOutputChannelNbr; // Analog input Output Nbr
unsigned char b_TimerSelectMode; // Contain data written at iobase + 0C
unsigned char b_ModeSelectRegister; // Contain data written at iobase + 0E
USHORT us_OutputRegister; // Contain data written at iobase + 0
unsigned short us_OutputRegister; // Contain data written at iobase + 0
unsigned char b_InterruptState;
unsigned char b_TimerInit; // Specify if InitTimerWatchdog was load
unsigned char b_TimerStarted; // Specify if timer 2 is running or not
......
......@@ -148,7 +148,7 @@ int i_APCI3120_InsnConfigAnalogInput(struct comedi_device * dev, struct comedi_s
int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
USHORT us_ConvertTiming, us_TmpValue, i;
unsigned short us_ConvertTiming, us_TmpValue, i;
unsigned char b_Tmp;
// fix convertion time to 10 us
......@@ -156,7 +156,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
printk("No timer0 Value using 10 us\n");
us_ConvertTiming = 10;
} else
us_ConvertTiming = (USHORT) (devpriv->ui_EocEosConversionTime / 1000); // nano to useconds
us_ConvertTiming = (unsigned short) (devpriv->ui_EocEosConversionTime / 1000); // nano to useconds
// this_board->i_hwdrv_InsnReadAnalogInput(dev,us_ConvertTiming,insn->n,&insn->chanspec,data,insn->unused[0]);
......@@ -179,7 +179,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
//to set in the timer
us_TmpValue =
(USHORT) inw(devpriv->iobase + APCI3120_RD_STATUS);
(unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS);
//EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001
if ((us_TmpValue & 0x00B0) == 0x00B0
......@@ -190,7 +190,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
((us_ConvertTiming * 12926) / 10000) - 1;
}
us_TmpValue = (USHORT) devpriv->b_InterruptMode;
us_TmpValue = (unsigned short) devpriv->b_InterruptMode;
switch (us_TmpValue) {
......@@ -260,7 +260,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
devpriv->iobase + APCI3120_TIMER_VALUE);
us_TmpValue =
(USHORT) inw(dev->iobase + APCI3120_RD_STATUS);
(unsigned short) inw(dev->iobase + APCI3120_RD_STATUS);
if (devpriv->b_EocEosInterrupt == APCI3120_DISABLE) {
......@@ -714,7 +714,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
UINT ui_Tmp, ui_DelayTiming = 0, ui_TimerValue1 = 0, dmalen0 =
0, dmalen1 = 0, ui_TimerValue2 =
0, ui_TimerValue0, ui_ConvertTiming;
USHORT us_TmpValue;
unsigned short us_TmpValue;
//BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver
//devpriv->b_AiCyclicAcquisition=APCI3120_ENABLE;
......@@ -795,7 +795,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
devpriv->pui_AiChannelList, 0))
return -EINVAL;
us_TmpValue = (USHORT) inw(dev->iobase + APCI3120_RD_STATUS);
us_TmpValue = (unsigned short) inw(dev->iobase + APCI3120_RD_STATUS);
/*** EL241003 : add this section in comment because floats must not be used
if((us_TmpValue & 0x00B0)==0x00B0)
{
......@@ -861,7 +861,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
APCI3120_SELECT_TIMER_0_WORD;
outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0);
//Set the convertion time
outw(((USHORT) ui_TimerValue0),
outw(((unsigned short) ui_TimerValue0),
dev->iobase + APCI3120_TIMER_VALUE);
break;
......@@ -879,7 +879,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
APCI3120_SELECT_TIMER_1_WORD;
outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0);
//Set the convertion time
outw(((USHORT) ui_TimerValue1),
outw(((unsigned short) ui_TimerValue1),
dev->iobase + APCI3120_TIMER_VALUE);
// init timer0 in mode 2
......@@ -896,7 +896,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0);
//Set the convertion time
outw(((USHORT) ui_TimerValue0),
outw(((unsigned short) ui_TimerValue0),
dev->iobase + APCI3120_TIMER_VALUE);
break;
......@@ -1422,10 +1422,10 @@ int i_APCI3120_ExttrigDisable(struct comedi_device * dev)
void v_APCI3120_Interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
USHORT int_daq;
unsigned short int_daq;
unsigned int int_amcc, ui_Check, i;
USHORT us_TmpValue;
unsigned short us_TmpValue;
unsigned char b_DummyRead;
struct comedi_subdevice *s = dev->subdevices + 0;
......@@ -1973,7 +1973,7 @@ int i_APCI3120_InsnConfigTimer(struct comedi_device * dev, struct comedi_subdevi
{
UINT ui_Timervalue2;
USHORT us_TmpValue;
unsigned short us_TmpValue;
unsigned char b_Tmp;
if (!data[1])
......@@ -1984,7 +1984,7 @@ int i_APCI3120_InsnConfigTimer(struct comedi_device * dev, struct comedi_subdevi
ui_Timervalue2 = data[1] / 1000; // convert nano seconds to u seconds
//this_board->i_hwdrv_InsnConfigTimer(dev, ui_Timervalue2,(unsigned char)data[0]);
us_TmpValue = (USHORT) inw(devpriv->iobase + APCI3120_RD_STATUS);
us_TmpValue = (unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS);
//EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001
// and calculate the time value to set in the timer
......@@ -2124,7 +2124,7 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device * dev, struct comedi_subdevic
{
UINT ui_Timervalue2 = 0;
USHORT us_TmpValue;
unsigned short us_TmpValue;
unsigned char b_Tmp;
if ((devpriv->b_Timer2Mode != APCI3120_WATCHDOG)
......@@ -2244,7 +2244,7 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device * dev, struct comedi_subdevic
}
// ui_Timervalue2=data[1]; // passed as argument
us_TmpValue =
(USHORT) inw(devpriv->iobase + APCI3120_RD_STATUS);
(unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS);
//EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001
// and calculate the time value to set in the timer
......@@ -2309,7 +2309,7 @@ int i_APCI3120_InsnReadTimer(struct comedi_device * dev, struct comedi_subdevice
struct comedi_insn * insn, unsigned int * data)
{
unsigned char b_Tmp;
USHORT us_TmpValue, us_TmpValue_2, us_StatusValue;
unsigned short us_TmpValue, us_TmpValue_2, us_StatusValue;
if ((devpriv->b_Timer2Mode != APCI3120_WATCHDOG)
&& (devpriv->b_Timer2Mode != APCI3120_TIMER)) {
......@@ -2647,7 +2647,7 @@ int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,
unsigned int *data)
{
UINT ui_Range, ui_Channel;
USHORT us_TmpValue;
unsigned short us_TmpValue;
ui_Range = CR_RANGE(insn->chanspec);
ui_Channel = CR_CHAN(insn->chanspec);
......@@ -2678,19 +2678,19 @@ int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,
do //Waiting of DA_READY BIT
{
us_TmpValue =
((USHORT) inw(devpriv->iobase +
((unsigned short) inw(devpriv->iobase +
APCI3120_RD_STATUS)) & 0x0001;
} while (us_TmpValue != 0x0001);
if (ui_Channel <= 3)
// for channel 0-3 out at the register 1 (wrDac1-8)
// data[i] typecasted to ushort since word write is to be done
outw((USHORT) data[0],
outw((unsigned short) data[0],
devpriv->iobase + APCI3120_ANALOG_OUTPUT_1);
else
// for channel 4-7 out at the register 2 (wrDac5-8)
//data[i] typecasted to ushort since word write is to be done
outw((USHORT) data[0],
outw((unsigned short) data[0],
devpriv->iobase + APCI3120_ANALOG_OUTPUT_2);
return insn->n;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment