Bluetooth: hci_ll: add support for setting public address
This adds support for setting the public address on Texas Instruments Bluetooth chips using a vendor-specific command. This has been tested on a CC2560A chip. The TI wiki also indicates that this command should work on TI WL17xx/WL18xx Bluetooth chips. During review, there was some question as to the correctness of the byte swapping since TI's documentation is not clear on this matter. This can be tested with the btmgmt utility from bluez. The adapter must be powered off to change the address. If the baswap() is omitted, address is reversed. In case there is a issue in the future, here is the output of btmon during the command `btmgmt public-addr 00:11:22:33:44:55`: Bluetooth monitor ver 5.43 = Note: Linux version 4.15.0-rc2-08561-gcb132a1-dirty (armv5tejl) 0.707043 = Note: Bluetooth subsystem version 2.22 0.707091 = New Index: 00:17:E7:BD:1C:8E (Primary,UART,hci0) [hci0] 0.707106 @ MGMT Open: btmgmt (privileged) version 1.14 {0x0002} 0.707124 @ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 0.707137 @ MGMT Open: btmon (privileged) version 1.14 {0x0003} 0.707540 @ MGMT Command: Set Public Address (0x0039) plen 6 {0x0002} [hci0] 11.167991 Address: 00:11:22:33:44:55 (CIMSYS Inc) @ MGMT Event: Command Complete (0x0001) plen 7 {0x0002} [hci0] 11.175681 Set Public Address (0x0039) plen 4 Status: Success (0x00) Missing options: 0x00000000 @ MGMT Event: Index Removed (0x0005) plen 0 {0x0003} [hci0] 11.175757 @ MGMT Event: Index Removed (0x0005) plen 0 {0x0002} [hci0] 11.175757 @ MGMT Event: Index Removed (0x0005) plen 0 {0x0001} [hci0] 11.175757 = Open Index: 00:17:E7:BD:1C:8E [hci0] 11.176807 < HCI Command: Vendor (0x3f|0x0006) plen 6 [hci0] 11.176975 00 11 22 33 44 55 .."3DU > HCI Event: Command Complete (0x0e) plen 4 [hci0] 11.188260 Vendor (0x3f|0x0006) ncmd 1 Status: Success (0x00) ... < HCI Command: Read Local Version Info.. (0x04|0x0001) plen 0 [hci0] 11.189859 > HCI Event: Command Complete (0x0e) plen 12 [hci0] 11.190732 Read Local Version Information (0x04|0x0001) ncmd 1 Status: Success (0x00) HCI version: Bluetooth 2.1 (0x04) - Revision 0 (0x0000) LMP version: Bluetooth 2.1 (0x04) - Subversion 6431 (0x191f) Manufacturer: Texas Instruments Inc. (13) < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 [hci0] 11.191027 > HCI Event: Command Complete (0x0e) plen 10 [hci0] 11.192101 Read BD ADDR (0x04|0x0009) ncmd 1 Status: Success (0x00) Address: 00:11:22:33:44:55 (CIMSYS Inc) ... Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Showing
Please register or sign in to comment