Commit abd7d097 authored by oscardagrach's avatar oscardagrach Committed by Wei Xu

arm64: dts: hikey: Enable HS200 mode on eMMC

According to the hi6220 datasheet, the MMC controller is JEDEC eMMC 4.5
compliant, in addition to supporting a clock of up to 150MHz. The Hikey
schematic also indicates the device utilizes 1.8v signaling. Define these
parameters in the device tree to enable HS200 mode.
Signed-off-by: default avatarRyan Grachek <ryan@edited.us>
Signed-off-by: default avatarWei Xu <xuwei5@hisilicon.com>
parent 17f21343
...@@ -299,7 +299,9 @@ gpio15: gpio@f702b000 { ...@@ -299,7 +299,9 @@ gpio15: gpio@f702b000 {
/* GPIO blocks 16 thru 19 do not appear to be routed to pins */ /* GPIO blocks 16 thru 19 do not appear to be routed to pins */
dwmmc_0: dwmmc0@f723d000 { dwmmc_0: dwmmc0@f723d000 {
max-frequency = <150000000>;
cap-mmc-highspeed; cap-mmc-highspeed;
mmc-hs200-1_8v;
non-removable; non-removable;
bus-width = <0x8>; bus-width = <0x8>;
vmmc-supply = <&ldo19>; vmmc-supply = <&ldo19>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment