Commit ac919986 authored by Magnus Damm's avatar Magnus Damm Committed by Paul Mundt

sh: intc - avoid SH7710 specific vector on SH7712

This patch makes sure that the sh7710 specific ipsec vector is missing
if building for a sh7712. All according to the datasheet.
Signed-off-by: default avatarMagnus Damm <damm@igel.co.jp>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent 1301e715
/*
* SH7710 Setup
* SH3 Setup code for SH7710, SH7712
*
* Copyright (C) 2006 Paul Mundt
* Copyright (C) 2007 Nobuhiro Iwamatsu
......@@ -45,7 +45,9 @@ static struct intc_vect vectors[] = {
INTC_VECT(SCIF1_ERI, 0x900), INTC_VECT(SCIF1_RXI, 0x920),
INTC_VECT(SCIF1_BRI, 0x940), INTC_VECT(SCIF1_TXI, 0x960),
INTC_VECT(DMAC_DEI4, 0xb80), INTC_VECT(DMAC_DEI5, 0xba0),
#ifdef CONFIG_CPU_SUBTYPE_SH7710
INTC_VECT(IPSEC, 0xbe0),
#endif
INTC_VECT(EDMAC0, 0xc00), INTC_VECT(EDMAC1, 0xc20),
INTC_VECT(EDMAC2, 0xc40),
INTC_VECT(SIOF0_ERI, 0xe00), INTC_VECT(SIOF0_TXI, 0xe20),
......@@ -88,7 +90,10 @@ static struct intc_prio_reg prio_registers[] = {
{ 0xa4000016, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
{ 0xa4000018, 16, 4, /* IPRD */ { 0, 0, IRQ4, IRQ5 } },
{ 0xa400001a, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } },
{ 0xa4080000, 16, 4, /* IPRF */ { IPSEC, DMAC2 } },
{ 0xa4080000, 16, 4, /* IPRF */ { 0, DMAC2 } },
#ifdef CONFIG_CPU_SUBTYPE_SH7710
{ 0xa4080000, 16, 4, /* IPRF */ { IPSEC } },
#endif
{ 0xa4080002, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } },
{ 0xa4080004, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } },
{ 0xa4080006, 16, 4, /* IPRI */ { 0, 0, SIOF1 } },
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment