bnxt_en: Update firmware interface spec to 1.8.0.

VF representors and PTP are added features in the new firmware spec.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnxt/bnxt.c

@@ -5646,7 +5646,7 @@ static int bnxt_hwrm_phy_qcaps(struct bnxt *bp)
 	if (rc)
 		goto hwrm_phy_qcaps_exit;
 
-	if (resp->eee_supported & PORT_PHY_QCAPS_RESP_EEE_SUPPORTED) {
+	if (resp->flags & PORT_PHY_QCAPS_RESP_FLAGS_EEE_SUPPORTED) {
 		struct ethtool_eee *eee = &bp->eee;
 		u16 fw_speeds = le16_to_cpu(resp->supported_speeds_eee_mode);
 
@@ -5686,13 +5686,15 @@ static int bnxt_update_link(struct bnxt *bp, bool chng_link_state)
 
 	memcpy(&link_info->phy_qcfg_resp, resp, sizeof(*resp));
 	link_info->phy_link_status = resp->link;
-	link_info->duplex =  resp->duplex;
+	link_info->duplex = resp->duplex_cfg;
+	if (bp->hwrm_spec_code >= 0x10800)
+		link_info->duplex = resp->duplex_state;
 	link_info->pause = resp->pause;
 	link_info->auto_mode = resp->auto_mode;
 	link_info->auto_pause_setting = resp->auto_pause;
 	link_info->lp_pause = resp->link_partner_adv_pause;
 	link_info->force_pause_setting = resp->force_pause;
-	link_info->duplex_setting = resp->duplex;
+	link_info->duplex_setting = resp->duplex_cfg;
 	if (link_info->phy_link_status == BNXT_LINK_LINK)
 		link_info->link_speed = le16_to_cpu(resp->link_speed);
 	else

drivers/net/ethernet/broadcom/bnxt/bnxt.h

@@ -12,10 +12,10 @@
 #define BNXT_H
 
 #define DRV_MODULE_NAME		"bnxt_en"
-#define DRV_MODULE_VERSION	"1.7.0"
+#define DRV_MODULE_VERSION	"1.8.0"
 
 #define DRV_VER_MAJ	1
-#define DRV_VER_MIN	7
+#define DRV_VER_MIN	8
 #define DRV_VER_UPD	0
 
 #include <linux/interrupt.h>
@@ -825,8 +825,8 @@ struct bnxt_link_info {
 	u8			loop_back;
 	u8			link_up;
 	u8			duplex;
-#define BNXT_LINK_DUPLEX_HALF	PORT_PHY_QCFG_RESP_DUPLEX_HALF
-#define BNXT_LINK_DUPLEX_FULL	PORT_PHY_QCFG_RESP_DUPLEX_FULL
+#define BNXT_LINK_DUPLEX_HALF	PORT_PHY_QCFG_RESP_DUPLEX_STATE_HALF
+#define BNXT_LINK_DUPLEX_FULL	PORT_PHY_QCFG_RESP_DUPLEX_STATE_FULL
 	u8			pause;
 #define BNXT_LINK_PAUSE_TX	PORT_PHY_QCFG_RESP_PAUSE_TX
 #define BNXT_LINK_PAUSE_RX	PORT_PHY_QCFG_RESP_PAUSE_RX

drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c

@@ -794,8 +794,10 @@ static int bnxt_vf_set_link(struct bnxt *bp, struct bnxt_vf_info *vf)
 					PORT_PHY_QCFG_RESP_LINK_LINK;
 				phy_qcfg_resp.link_speed = cpu_to_le16(
 					PORT_PHY_QCFG_RESP_LINK_SPEED_10GB);
-				phy_qcfg_resp.duplex =
-					PORT_PHY_QCFG_RESP_DUPLEX_FULL;
+				phy_qcfg_resp.duplex_cfg =
+					PORT_PHY_QCFG_RESP_DUPLEX_CFG_FULL;
+				phy_qcfg_resp.duplex_state =
+					PORT_PHY_QCFG_RESP_DUPLEX_STATE_FULL;
 				phy_qcfg_resp.pause =
 					(PORT_PHY_QCFG_RESP_PAUSE_TX |
 					 PORT_PHY_QCFG_RESP_PAUSE_RX);
@@ -804,7 +806,8 @@ static int bnxt_vf_set_link(struct bnxt *bp, struct bnxt_vf_info *vf)
 			/* force link down */
 			phy_qcfg_resp.link = PORT_PHY_QCFG_RESP_LINK_NO_LINK;
 			phy_qcfg_resp.link_speed = 0;
-			phy_qcfg_resp.duplex = PORT_PHY_QCFG_RESP_DUPLEX_HALF;
+			phy_qcfg_resp.duplex_state =
+				PORT_PHY_QCFG_RESP_DUPLEX_STATE_HALF;
 			phy_qcfg_resp.pause = 0;
 		}
 		rc = bnxt_hwrm_fwd_resp(bp, vf, &phy_qcfg_resp,