Merge branch 'macb-next'

Merge branch 'macb-next'

Boris Brezillon says:

====================
net/macb: merge at91_ether driver into macb driver

The rm9200 boards use the dedicated at91_ether driver instead of the
regular macb driver.

Both the macb and at91_ether drivers can be compiled as separated
modules.
Since the at91_ether driver uses code from the macb driver, at91_ether.ko
depends on macb.ko.

However the macb.ko module always fails to load on rm9200 boards: the
macb_probe() function expects a hclk clock which doesn't exist on rm9200.
Then the at91_ether.ko can't be loaded in turn due to unresolved
dependencies.

This series of patches fix this issue by merging at91_ether into macb.

Patch 1 is fixing a problem that might happen when enabling ARM
multi-platform suppot.

Changes since v3:
- move "net: macb: remove #if defined(CONFIG_ARCH_AT91) sections" patch
  into this series to avoid dependency on other patch series.

Changes since v2:
- rebase after changed brought by commit "net: macb: remove #if
  defined(CONFIG_ARCH_AT91) sections"

Changes since v1:
- rework probe functions to share common probing logic
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/arm/boot/dts/at91sam9260.dtsi

@@ -842,7 +842,7 @@ uart1: serial@fffd8000 {
 			};
 
 			macb0: ethernet@fffc4000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xfffc4000 0x100>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9263.dtsi

@@ -845,7 +845,7 @@ ac97: sound@fffa0000 {
 			};
 
 			macb0: ethernet@fffbc000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -956,7 +956,7 @@ usart3: serial@fff98000 {
 			};
 
 			macb0: ethernet@fffbc000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9x5_macb0.dtsi

@@ -53,7 +53,7 @@ macb0_clk: macb0_clk {
 			};
 
 			macb0: ethernet@f802c000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9x5_macb1.dtsi

@@ -41,7 +41,7 @@ macb1_clk: macb1_clk {
 			};
 
 			macb1: ethernet@f8030000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xf8030000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";

arch/arm/boot/dts/sama5d3_emac.dtsi

@@ -41,7 +41,7 @@ macb1_clk: macb1_clk {
 			};
 
 			macb1: ethernet@f802c000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
 				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";

drivers/net/ethernet/cadence/Kconfig

@@ -20,14 +20,6 @@ config NET_CADENCE
 
 if NET_CADENCE
 
-config ARM_AT91_ETHER
-	tristate "AT91RM9200 Ethernet support"
-	depends on HAS_DMA && (ARCH_AT91 || COMPILE_TEST)
-	select MACB
-	---help---
-	  If you wish to compile a kernel for the AT91RM9200 and enable
-	  ethernet support, then you should always answer Y to this.
-
 config MACB
 	tristate "Cadence MACB/GEM support"
 	depends on HAS_DMA

drivers/net/ethernet/cadence/Makefile

@@ -2,5 +2,4 @@
 # Makefile for the Atmel network device drivers.
 #
 
-obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
 obj-$(CONFIG_MACB) += macb.o

drivers/net/ethernet/cadence/macb.h

@@ -391,6 +391,8 @@
 
 /* Capability mask bits */
 #define MACB_CAPS_ISR_CLEAR_ON_WRITE		0x00000001
+#define MACB_CAPS_USRIO_HAS_CLKEN		0x00000002
+#define MACB_CAPS_USRIO_DEFAULT_IS_MII		0x00000004
 #define MACB_CAPS_FIFO_MODE			0x10000000
 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE	0x20000000
 #define MACB_CAPS_SG_DISABLED			0x40000000
@@ -752,6 +754,7 @@ struct macb_or_gem_ops {
 struct macb_config {
 	u32			caps;
 	unsigned int		dma_burst_length;
+	int	(*init)(struct platform_device *pdev);
 };
 
 struct macb_queue {
@@ -822,15 +825,6 @@ struct macb {
 	u64			ethtool_stats[GEM_STATS_LEN];
 };
 
-extern const struct ethtool_ops macb_ethtool_ops;
-
-int macb_mii_init(struct macb *bp);
-int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-struct net_device_stats *macb_get_stats(struct net_device *dev);
-void macb_set_rx_mode(struct net_device *dev);
-void macb_set_hwaddr(struct macb *bp);
-void macb_get_hwaddr(struct macb *bp);
-
 static inline bool macb_is_gem(struct macb *bp)
 {
 	return !!(bp->caps & MACB_CAPS_MACB_IS_GEM);