Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: fix lh7a40x build
  ARM: fix sa1100 build
  ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug
  ARM: VFP: fix vfp thread init bug and document vfp notifier entry conditions
  ARM: pxa: fix now incorrect reference of skt->irq by using skt->socket.pci_irq
  [ARM] pxa/zeus: default configuration for Arcom Zeus SBC.
  [ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus
  [ARM] pxa/zeus: basic support for Arcom Zeus SBC
  [ARM] pxa/em-x270: fix usb hub power up/reset sequence
  PCMCIA: fix pxa2xx_lubbock modular build error
  ARM: RealView: Fix typo in the RealView/PBX Kconfig entry
  ARM: Do not allow the probing of the local timer
  ARM: Add an earlyprintk debug console

arch/arm/Kconfig

@@ -603,6 +603,7 @@ config ARCH_SA1100
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
+	select CPU_FREQ
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -1359,13 +1360,9 @@ source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_SA1100
 	bool
-	depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
-	default y
 
 config CPU_FREQ_SA1110
 	bool
-	depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3)
-	default y
 
 config CPU_FREQ_INTEGRATOR
 	tristate "CPUfreq driver for ARM Integrator CPUs"

arch/arm/Kconfig.debug

@@ -71,6 +71,14 @@ config DEBUG_LL
 	  in the kernel.  This is helpful if you are debugging code that
 	  executes before the console is initialized.
 
+config EARLY_PRINTK
+	bool "Early printk"
+	depends on DEBUG_LL
+	help
+	  Say Y here if you want to have an early console using the
+	  kernel low-level debugging functions. Add earlyprintk to your
+	  kernel parameters to enable this console.
+
 config DEBUG_ICEDCC
 	bool "Kernel low-level debugging via EmbeddedICE DCC channel"
 	depends on DEBUG_LL

arch/arm/kernel/Makefile

@@ -54,5 +54,6 @@ endif
 
 head-y			:= head$(MMUEXT).o
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 extra-y := $(head-y) init_task.o vmlinux.lds

arch/arm/kernel/early_printk.c

+/*
+ *  linux/arch/arm/kernel/early_printk.c
+ *
+ *  Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/init.h>
+
+extern void printch(int);
+
+static void early_write(const char *s, unsigned n)
+{
+	while (n-- > 0) {
+		if (*s == '\n')
+			printch('\r');
+		printch(*s);
+		s++;
+	}
+}
+
+static void early_console_write(struct console *con, const char *s, unsigned n)
+{
+	early_write(s, n);
+}
+
+static struct console early_console = {
+	.name =		"earlycon",
+	.write =	early_console_write,
+	.flags =	CON_PRINTBUFFER | CON_BOOT,
+	.index =	-1,
+};
+
+asmlinkage void early_printk(const char *fmt, ...)
+{
+	char buf[512];
+	int n;
+	va_list ap;
+
+	va_start(ap, fmt);
+	n = vscnprintf(buf, sizeof(buf), fmt, ap);
+	early_write(buf, n);
+	va_end(ap);
+}
+
+static int __init setup_early_printk(char *buf)
+{
+	register_console(&early_console);
+	return 0;
+}
+
+early_param("earlyprintk", setup_early_printk);

arch/arm/kernel/smp_twd.c

@@ -160,6 +160,7 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 
 	/* Make sure our local interrupt controller has this enabled */
 	local_irq_save(flags);
+	irq_to_desc(clk->irq)->status |= IRQ_NOPROBE;
 	get_irq_chip(clk->irq)->unmask(clk->irq);
 	local_irq_restore(flags);
 

arch/arm/mach-clps711x/include/mach/memory.h

@@ -30,6 +30,8 @@
 
 #define __virt_to_bus(x)	((x) - PAGE_OFFSET)
 #define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+#define __pfn_to_bus(x)		(__pfn_to_phys(x) - PHYS_OFFSET)
+#define __bus_to_pfn(x)		__phys_to_pfn((x) + PHYS_OFFSET)
 
 #endif
 

arch/arm/mach-footbridge/common.c

@@ -201,6 +201,11 @@ void __init footbridge_map_io(void)
 
 #ifdef CONFIG_FOOTBRIDGE_ADDIN
 
+static inline unsigned long fb_bus_sdram_offset(void)
+{
+	return *CSR_PCISDRAMBASE & 0xfffffff0;
+}
+
 /*
  * These two functions convert virtual addresses to PCI addresses and PCI
  * addresses to virtual addresses.  Note that it is only legal to use these
@@ -210,14 +215,13 @@ unsigned long __virt_to_bus(unsigned long res)
 {
 	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
 
-	return (res - PAGE_OFFSET) + (*CSR_PCISDRAMBASE & 0xfffffff0);
+	return res + (fb_bus_sdram_offset() - PAGE_OFFSET);
 }
 EXPORT_SYMBOL(__virt_to_bus);
 
 unsigned long __bus_to_virt(unsigned long res)
 {
-	res -= (*CSR_PCISDRAMBASE & 0xfffffff0);
-	res += PAGE_OFFSET;
+	res = res - (fb_bus_sdram_offset() - PAGE_OFFSET);
 
 	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
 
@@ -225,4 +229,16 @@ unsigned long __bus_to_virt(unsigned long res)
 }
 EXPORT_SYMBOL(__bus_to_virt);
 
+unsigned long __pfn_to_bus(unsigned long pfn)
+{
+	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET));
+}
+EXPORT_SYMBOL(__pfn_to_bus);
+
+unsigned long __bus_to_pfn(unsigned long bus)
+{
+	return __phys_to_pfn(bus - (fb_bus_sdram_offset() - PHYS_OFFSET));
+}
+EXPORT_SYMBOL(__bus_to_pfn);
+
 #endif

arch/arm/mach-footbridge/include/mach/memory.h

@@ -29,6 +29,8 @@
 #ifndef __ASSEMBLY__
 extern unsigned long __virt_to_bus(unsigned long);
 extern unsigned long __bus_to_virt(unsigned long);
+extern unsigned long __pfn_to_bus(unsigned long);
+extern unsigned long __bus_to_pfn(unsigned long);
 #endif
 #define __virt_to_bus	__virt_to_bus
 #define __bus_to_virt	__bus_to_virt
@@ -36,14 +38,15 @@ extern unsigned long __bus_to_virt(unsigned long);
 #elif defined(CONFIG_FOOTBRIDGE_HOST)
 
 /*
- * The footbridge is programmed to expose the system RAM at the corresponding
- * address.  So, if PAGE_OFFSET is 0xc0000000, RAM appears at 0xe0000000.
- * If 0x80000000, then its exposed at 0xa0000000 on the bus. etc.
- * The only requirement is that the RAM isn't placed at bus address 0 which
+ * The footbridge is programmed to expose the system RAM at 0xe0000000.
+ * The requirement is that the RAM isn't placed at bus address 0, which
  * would clash with VGA cards.
  */
-#define __virt_to_bus(x)	((x) - 0xe0000000)
-#define __bus_to_virt(x)	((x) + 0xe0000000)
+#define BUS_OFFSET		0xe0000000
+#define __virt_to_bus(x)	((x) + (BUS_OFFSET - PAGE_OFFSET))
+#define __bus_to_virt(x)	((x) - (BUS_OFFSET - PAGE_OFFSET))
+#define __pfn_to_bus(x)		(__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
+#define __bus_to_pfn(x)		__phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
 
 #else
 

arch/arm/mach-integrator/include/mach/memory.h

@@ -28,6 +28,7 @@
 #define BUS_OFFSET	UL(0x80000000)
 #define __virt_to_bus(x)	((x) - PAGE_OFFSET + BUS_OFFSET)
 #define __bus_to_virt(x)	((x) - BUS_OFFSET + PAGE_OFFSET)
-#define __pfn_to_bus(x)		(((x) << PAGE_SHIFT) + BUS_OFFSET)
+#define __pfn_to_bus(x)		(__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
+#define __bus_to_pfn(x)		__phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
 
 #endif

arch/arm/mach-ixp2000/include/mach/memory.h

@@ -17,11 +17,15 @@
 
 #include <mach/ixp2000-regs.h>
 
-#define __virt_to_bus(v) \
-	(((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
+#define IXP2000_PCI_SDRAM_OFFSET	(*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)
 
-#define __bus_to_virt(b) \
-	__phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
+#define __phys_to_bus(x)	((x) + (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+#define __bus_to_phys(x)	((x) - (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+
+#define __virt_to_bus(v)	__phys_to_bus(__virt_to_phys(v))
+#define __bus_to_virt(b)	__phys_to_virt(__bus_to_phys(b))
+#define __pfn_to_bus(p)		__phys_to_bus(__pfn_to_phys(p))
+#define __bus_to_pfn(b)		__phys_to_pfn(__bus_to_phys(b))
 
 #endif
 

arch/arm/mach-ixp23xx/include/mach/memory.h

@@ -19,16 +19,15 @@
  */
 #define PHYS_OFFSET		(0x00000000)
 
-#define __virt_to_bus(v)						\
-	({ unsigned int ret;						\
-	ret = ((__virt_to_phys(v) - 0x00000000) +			\
-	 (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); 	\
-	ret; })
-
-#define __bus_to_virt(b)						\
-	({ unsigned int data;						\
-	data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR);		\
-	 __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
+#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0))
+
+#define __phys_to_bus(x)	((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+#define __bus_to_phys(x)	((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+
+#define __virt_to_bus(v)	__phys_to_bus(__virt_to_phys(v))
+#define __bus_to_virt(b)	__phys_to_virt(__bus_to_phys(b))
+#define __pfn_to_bus(p)		__phys_to_bus(__pfn_to_phys(p))
+#define __bus_to_pfn(b)		__phys_to_pfn(__bus_to_phys(b))
 
 #define arch_is_coherent()	1
 

arch/arm/mach-lh7a40x/clocks.c

@@ -7,8 +7,6 @@
  *  version 2 as published by the Free Software Foundation.
  *
  */
-
-#include <linux/cpufreq.h>
 #include <mach/hardware.h>
 #include <mach/clocks.h>
 #include <linux/err.h>
@@ -31,12 +29,6 @@ struct clk {
 #define HCLKDIV(c)	(((c) >>  0) & 0x02)
 #define PCLKDIV(c)	(((c) >> 16) & 0x03)
 
-unsigned int cpufreq_get (unsigned int cpu) /* in kHz */
-{
-	return fclkfreq_get ()/1000;
-}
-EXPORT_SYMBOL(cpufreq_get);
-
 unsigned int fclkfreq_get (void)
 {
 	unsigned int clkset = CSC_CLKSET;

arch/arm/mach-pxa/Kconfig

@@ -63,6 +63,15 @@ config ARCH_VIPER
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 	select PXA_HAVE_ISA_IRQS
+	select ARCOM_PCMCIA
+
+config MACH_ARCOM_ZEUS
+	bool "Arcom/Eurotech ZEUS SBC"
+	select PXA27x
+	select ISA
+	select PXA_HAVE_BOARD_IRQS
+	select PXA_HAVE_ISA_IRQS
+	select ARCOM_PCMCIA
 
 config MACH_BALLOON3
 	bool "Balloon 3 board"
@@ -179,6 +188,11 @@ config MACH_TRIZEPS_ANY
 
 endchoice
 
+config ARCOM_PCMCIA
+	bool
+	help
+	  Generic option for Arcom Viper/Zeus PCMCIA
+
 config TRIZEPS_PCMCIA
 	bool
 	help

arch/arm/mach-pxa/Makefile

@@ -38,6 +38,7 @@ obj-$(CONFIG_MACH_SAAR)		+= saar.o
 # 3rd Party Dev Platforms
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_ARCH_VIPER)	+= viper.o
+obj-$(CONFIG_MACH_ARCOM_ZEUS)	+= zeus.o
 obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
 obj-$(CONFIG_MACH_CSB726)	+= csb726.o
 obj-$(CONFIG_CSB726_CSB701)	+= csb701.o

arch/arm/mach-pxa/em-x270.c

@@ -497,16 +497,15 @@ static int em_x270_usb_hub_init(void)
 		goto err_free_vbus_gpio;
 
 	/* USB Hub power-on and reset */
-	gpio_direction_output(usb_hub_reset, 0);
+	gpio_direction_output(usb_hub_reset, 1);
+	gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
 	regulator_enable(em_x270_usb_ldo);
-	gpio_set_value(usb_hub_reset, 1);
 	gpio_set_value(usb_hub_reset, 0);
+	gpio_set_value(usb_hub_reset, 1);
 	regulator_disable(em_x270_usb_ldo);
 	regulator_enable(em_x270_usb_ldo);
-	gpio_set_value(usb_hub_reset, 1);
-
-	/* enable VBUS */
-	gpio_direction_output(GPIO9_USB_VBUS_EN, 1);
+	gpio_set_value(usb_hub_reset, 0);
+	gpio_set_value(GPIO9_USB_VBUS_EN, 1);
 
 	return 0;
 

arch/arm/mach-pxa/include/mach/arcom-pcmcia.h

+#ifndef __ARCOM_PCMCIA_H
+#define __ARCOM_PCMCIA_H
+
+struct arcom_pcmcia_pdata {
+	int	cd_gpio;
+	int	rdy_gpio;
+	int	pwr_gpio;
+	void	(*reset)(int state);
+};
+
+#endif

arch/arm/mach-pxa/include/mach/viper.h

@@ -85,8 +85,6 @@
 /* Interrupt and Configuration Register (VIPER_ICR) */
 /* This is a write only register. Only CF_RST is used under Linux */
 
-extern void viper_cf_rst(int state);
-
 #define VIPER_ICR_RETRIG	(1 << 0)
 #define VIPER_ICR_AUTO_CLR	(1 << 1)
 #define VIPER_ICR_R_DIS		(1 << 2)

arch/arm/mach-pxa/include/mach/zeus.h

+/*
+ *  arch/arm/mach-pxa/include/mach/zeus.h
+ *
+ *  Author:	David Vrabel
+ *  Created:	Sept 28, 2005
+ *  Copyright:	Arcom Control Systems Ltd.
+ *
+ *  Maintained by: Marc Zyngier <maz@misterjones.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _MACH_ZEUS_H
+#define _MACH_ZEUS_H
+
+/* Physical addresses */
+#define ZEUS_FLASH_PHYS		PXA_CS0_PHYS
+#define ZEUS_ETH0_PHYS		PXA_CS1_PHYS
+#define ZEUS_ETH1_PHYS		PXA_CS2_PHYS
+#define ZEUS_CPLD_PHYS		(PXA_CS4_PHYS+0x2000000)
+#define ZEUS_SRAM_PHYS		PXA_CS5_PHYS
+#define ZEUS_PC104IO_PHYS	(0x30000000)
+
+#define ZEUS_CPLD_VERSION_PHYS	(ZEUS_CPLD_PHYS + 0x00000000)
+#define ZEUS_CPLD_ISA_IRQ_PHYS	(ZEUS_CPLD_PHYS + 0x00800000)
+#define ZEUS_CPLD_CONTROL_PHYS	(ZEUS_CPLD_PHYS + 0x01000000)
+#define ZEUS_CPLD_EXTWDOG_PHYS	(ZEUS_CPLD_PHYS + 0x01800000)
+
+/* GPIOs */
+#define ZEUS_AC97_GPIO		0
+#define ZEUS_WAKEUP_GPIO	1
+#define ZEUS_UARTA_GPIO		9
+#define ZEUS_UARTB_GPIO		10
+#define ZEUS_UARTC_GPIO		12
+#define ZEUS_UARTD_GPIO		11
+#define ZEUS_ETH0_GPIO		14
+#define ZEUS_ISA_GPIO		17
+#define ZEUS_BKLEN_GPIO		19
+#define ZEUS_USB2_PWREN_GPIO	22
+#define ZEUS_PTT_GPIO		27
+#define ZEUS_CF_CD_GPIO         35
+#define ZEUS_MMC_WP_GPIO        52
+#define ZEUS_MMC_CD_GPIO        53
+#define ZEUS_EXTGPIO_GPIO	91
+#define ZEUS_CF_PWEN_GPIO       97
+#define ZEUS_CF_RDY_GPIO        99
+#define ZEUS_LCD_EN_GPIO	101
+#define ZEUS_ETH1_GPIO		113
+#define ZEUS_CAN_GPIO		116
+
+#define ZEUS_EXT0_GPIO_BASE	128
+#define ZEUS_EXT1_GPIO_BASE	160
+#define ZEUS_USER_GPIO_BASE	192
+
+#define ZEUS_EXT0_GPIO(x)	(ZEUS_EXT0_GPIO_BASE + (x))
+#define ZEUS_EXT1_GPIO(x)	(ZEUS_EXT1_GPIO_BASE + (x))
+#define ZEUS_USER_GPIO(x)	(ZEUS_USER_GPIO_BASE + (x))
+
+/*
+ * CPLD registers:
+ * Only 4 registers, but spreaded over a 32MB address space.
+ * Be gentle, and remap that over 32kB...
+ */
+
+#define ZEUS_CPLD		(0xf0000000)
+#define ZEUS_CPLD_VERSION	(ZEUS_CPLD + 0x0000)
+#define ZEUS_CPLD_ISA_IRQ	(ZEUS_CPLD + 0x1000)
+#define ZEUS_CPLD_CONTROL	(ZEUS_CPLD + 0x2000)
+#define ZEUS_CPLD_EXTWDOG	(ZEUS_CPLD + 0x3000)
+
+/* CPLD register bits */
+#define ZEUS_CPLD_CONTROL_CF_RST        0x01
+
+#define ZEUS_PC104IO		(0xf1000000)
+
+#define ZEUS_SRAM_SIZE		(256 * 1024)
+
+#endif
+
+

arch/arm/mach-pxa/viper.c

@@ -47,6 +47,7 @@
 #include <mach/pxafb.h>
 #include <plat/i2c.h>
 #include <mach/regs-uart.h>
+#include <mach/arcom-pcmcia.h>
 #include <mach/viper.h>
 
 #include <asm/setup.h>
@@ -76,14 +77,28 @@ static void viper_icr_clear_bit(unsigned int bit)
 }
 
 /* This function is used from the pcmcia module to reset the CF */
-void viper_cf_rst(int state)
+static void viper_cf_reset(int state)
 {
 	if (state)
 		viper_icr_set_bit(VIPER_ICR_CF_RST);
 	else
 		viper_icr_clear_bit(VIPER_ICR_CF_RST);
 }
-EXPORT_SYMBOL(viper_cf_rst);
+
+static struct arcom_pcmcia_pdata viper_pcmcia_info = {
+	.cd_gpio	= VIPER_CF_CD_GPIO,
+	.rdy_gpio	= VIPER_CF_RDY_GPIO,
+	.pwr_gpio	= VIPER_CF_POWER_GPIO,
+	.reset		= viper_cf_reset,
+};
+
+static struct platform_device viper_pcmcia_device = {
+	.name		= "viper-pcmcia",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &viper_pcmcia_info,
+	},
+};
 
 /*
  * The CPLD version register was not present on VIPER boards prior to
@@ -685,6 +700,7 @@ static struct platform_device *viper_devs[] __initdata = {
 	&viper_mtd_devices[0],
 	&viper_mtd_devices[1],
 	&viper_backlight_device,
+	&viper_pcmcia_device,
 };
 
 static mfp_cfg_t viper_pin_config[] __initdata = {

arch/arm/mach-realview/Kconfig

@@ -70,7 +70,7 @@ config MACH_REALVIEW_PBX
 	bool "Support RealView/PBX platform"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
-	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET
+	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
 	help
 	  Include support for the ARM(R) RealView PBX platform.

arch/arm/mach-s3c24a0/include/mach/memory.h

@@ -15,5 +15,7 @@
 
 #define __virt_to_bus(x) __virt_to_phys(x)
 #define __bus_to_virt(x) __phys_to_virt(x)
+#define __pfn_to_bus(x) __pfn_to_phys(x)
+#define __bus_to_pfn(x)	__phys_to_pfn(x)
 
 #endif

arch/arm/mach-sa1100/Kconfig

@@ -4,6 +4,7 @@ menu "SA11x0 Implementations"
 
 config SA1100_ASSABET
 	bool "Assabet"
+	select CPU_FREQ_SA1110
 	help
 	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
 	  Microprocessor Development Board (also known as the Assabet).
@@ -19,6 +20,7 @@ config ASSABET_NEPONSET
 
 config SA1100_CERF
 	bool "CerfBoard"
+	select CPU_FREQ_SA1110
 	help
 	  The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
 	  More information is available at:
@@ -45,6 +47,7 @@ endchoice
 
 config SA1100_COLLIE
 	bool "Sharp Zaurus SL5500"
+	# FIXME: select CPU_FREQ_SA11x0
 	select SHARP_LOCOMO
 	select SHARP_SCOOP
 	select SHARP_PARAM
@@ -54,6 +57,7 @@ config SA1100_COLLIE
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
 	select HTC_EGPIO
+	select CPU_FREQ_SA1100
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3100 handheld computer.  Information about this machine and the
@@ -64,6 +68,7 @@ config SA1100_H3100
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
 	select HTC_EGPIO
+	select CPU_FREQ_SA1100
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3600 handheld computer.  Information about this machine and the
@@ -74,6 +79,7 @@ config SA1100_H3600
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
 	select SA1111
+	select CPU_FREQ_SA1100
 	help
 	  Say Y here if you want to build a kernel for the HP Laboratories
 	  BadgePAD 4.
@@ -81,6 +87,7 @@ config SA1100_BADGE4
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
 	select SA1111
+	# FIXME: select CPU_FREQ_SA11x0
 	help
 	  Say Y here if you want to build a kernel for the HP Jornada 720
 	  handheld computer.  See <http://www.hp.com/jornada/products/720>
@@ -98,12 +105,14 @@ config SA1100_JORNADA720_SSP
 
 config SA1100_HACKKIT
 	bool "HackKit Core CPU Board"
+	select CPU_FREQ_SA1100
 	help
 	  Say Y here to support the HackKit Core CPU Board
 	  <http://hackkit.eletztrick.de>;
 
 config SA1100_LART
 	bool "LART"
+	select CPU_FREQ_SA1100
 	help
 	  Say Y here if you are using the Linux Advanced Radio Terminal
 	  (also known as the LART).  See <http://www.lartmaker.nl/> for
@@ -111,6 +120,7 @@ config SA1100_LART
 
 config SA1100_PLEB
 	bool "PLEB"
+	select CPU_FREQ_SA1100
 	help
 	  Say Y here if you are using version 1 of the Portable Linux
 	  Embedded Board (also known as PLEB).
@@ -119,6 +129,7 @@ config SA1100_PLEB
 
 config SA1100_SHANNON
 	bool "Shannon"
+	select CPU_FREQ_SA1100
 	help
 	  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
 	  limited edition webphone produced by Philips. The Shannon is a SA1100
@@ -127,6 +138,7 @@ config SA1100_SHANNON
 
 config SA1100_SIMPAD
 	bool "Simpad"
+	select CPU_FREQ_SA1110
 	help
 	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
 	  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
@@ -145,3 +157,4 @@ config SA1100_SSP
 endmenu
 
 endif
+

arch/arm/mach-sa1100/generic.c

@@ -58,7 +58,6 @@ static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
 	2802	/* 280.2 MHz */
 };
 
-#if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110)
 /* rounds up(!)  */
 unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
 {
@@ -110,17 +109,6 @@ unsigned int sa11x0_getspeed(unsigned int cpu)
 	return cclk_frequency_100khz[PPCR & 0xf] * 100;
 }
 
-#else
-/*
- * We still need to provide this so building without cpufreq works.
- */
-unsigned int cpufreq_get(unsigned int cpu)
-{
-	return cclk_frequency_100khz[PPCR & 0xf] * 100;
-}
-EXPORT_SYMBOL(cpufreq_get);
-#endif
-
 /*
  * This is the SA11x0 sched_clock implementation.  This has
  * a resolution of 271ns, and a maximum value of 32025597s (370 days).

arch/arm/vfp/vfpmodule.c

@@ -38,16 +38,72 @@ union vfp_state *last_VFP_context[NR_CPUS];
  */
 unsigned int VFP_arch;
 
+/*
+ * Per-thread VFP initialization.
+ */
+static void vfp_thread_flush(struct thread_info *thread)
+{
+	union vfp_state *vfp = &thread->vfpstate;
+	unsigned int cpu;
+
+	memset(vfp, 0, sizeof(union vfp_state));
+
+	vfp->hard.fpexc = FPEXC_EN;
+	vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
+
+	/*
+	 * Disable VFP to ensure we initialize it first.  We must ensure
+	 * that the modification of last_VFP_context[] and hardware disable
+	 * are done for the same CPU and without preemption.
+	 */
+	cpu = get_cpu();
+	if (last_VFP_context[cpu] == vfp)
+		last_VFP_context[cpu] = NULL;
+	fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
+	put_cpu();
+}
+
+static void vfp_thread_release(struct thread_info *thread)
+{
+	/* release case: Per-thread VFP cleanup. */
+	union vfp_state *vfp = &thread->vfpstate;
+	unsigned int cpu = thread->cpu;
+
+	if (last_VFP_context[cpu] == vfp)
+		last_VFP_context[cpu] = NULL;
+}
+
+/*
+ * When this function is called with the following 'cmd's, the following
+ * is true while this function is being run:
+ *  THREAD_NOFTIFY_SWTICH:
+ *   - the previously running thread will not be scheduled onto another CPU.
+ *   - the next thread to be run (v) will not be running on another CPU.
+ *   - thread->cpu is the local CPU number
+ *   - not preemptible as we're called in the middle of a thread switch
+ *  THREAD_NOTIFY_FLUSH:
+ *   - the thread (v) will be running on the local CPU, so
+ *	v === current_thread_info()
+ *   - thread->cpu is the local CPU number at the time it is accessed,
+ *	but may change at any time.
+ *   - we could be preempted if tree preempt rcu is enabled, so
+ *	it is unsafe to use thread->cpu.
+ *  THREAD_NOTIFY_RELEASE:
+ *   - the thread (v) will not be running on any CPU; it is a dead thread.
+ *   - thread->cpu will be the last CPU the thread ran on, which may not
+ *	be the current CPU.
+ *   - we could be preempted if tree preempt rcu is enabled.
+ */
 static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
 {
 	struct thread_info *thread = v;
-	union vfp_state *vfp;
-	__u32 cpu = thread->cpu;
 
 	if (likely(cmd == THREAD_NOTIFY_SWITCH)) {
 		u32 fpexc = fmrx(FPEXC);
 
 #ifdef CONFIG_SMP
+		unsigned int cpu = thread->cpu;
+
 		/*
 		 * On SMP, if VFP is enabled, save the old state in
 		 * case the thread migrates to a different CPU. The
@@ -74,25 +130,10 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
 		return NOTIFY_DONE;
 	}
 
-	vfp = &thread->vfpstate;
-	if (cmd == THREAD_NOTIFY_FLUSH) {
-		/*
-		 * Per-thread VFP initialisation.
-		 */
-		memset(vfp, 0, sizeof(union vfp_state));
-
-		vfp->hard.fpexc = FPEXC_EN;
-		vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
-
-		/*
-		 * Disable VFP to ensure we initialise it first.
-		 */
-		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
-	}
-
-	/* flush and release case: Per-thread VFP cleanup. */
-	if (last_VFP_context[cpu] == vfp)
-		last_VFP_context[cpu] = NULL;
+	if (cmd == THREAD_NOTIFY_FLUSH)
+		vfp_thread_flush(thread);
+	else
+		vfp_thread_release(thread);
 
 	return NOTIFY_DONE;
 }

drivers/pcmcia/Kconfig

@@ -208,7 +208,7 @@ config PCMCIA_PXA2XX
 	depends on ARM && ARCH_PXA && PCMCIA
 	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
-		    || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2)
+		    || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2)
 	select PCMCIA_SOC_COMMON
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller

drivers/pcmcia/Makefile

@@ -67,7 +67,7 @@ pxa2xx-obj-$(CONFIG_ARCH_LUBBOCK)		+= pxa2xx_lubbock_cs.o
 pxa2xx-obj-$(CONFIG_MACH_MAINSTONE)		+= pxa2xx_mainstone.o
 pxa2xx-obj-$(CONFIG_PXA_SHARPSL)		+= pxa2xx_sharpsl.o
 pxa2xx-obj-$(CONFIG_MACH_ARMCORE)		+= pxa2xx_cm_x2xx_cs.o
-pxa2xx-obj-$(CONFIG_ARCH_VIPER)			+= pxa2xx_viper.o
+pxa2xx-obj-$(CONFIG_ARCOM_PCMCIA)		+= pxa2xx_viper.o
 pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps4.o
 pxa2xx-obj-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
 pxa2xx-obj-$(CONFIG_MACH_PALMTC)		+= pxa2xx_palmtc.o

drivers/pcmcia/pxa2xx_base.c

@@ -214,7 +214,8 @@ static void pxa2xx_configure_sockets(struct device *dev)
 	MECR |= MECR_CIT;
 
 	/* Set MECR:NOS (Number Of Sockets) */
-	if ((ops->first + ops->nr) > 1 || machine_is_viper())
+	if ((ops->first + ops->nr) > 1 ||
+	    machine_is_viper() || machine_is_arcom_zeus())
 		MECR |= MECR_NOS;
 	else
 		MECR &= ~MECR_NOS;
@@ -252,6 +253,7 @@ int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt)
 
 	return soc_pcmcia_add_one(skt);
 }
+EXPORT_SYMBOL(pxa2xx_drv_pcmcia_add_one);
 
 void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops)
 {
@@ -261,19 +263,19 @@ void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops)
 	ops->frequency_change = pxa2xx_pcmcia_frequency_change;
 #endif
 }
+EXPORT_SYMBOL(pxa2xx_drv_pcmcia_ops);
 
-int __pxa2xx_drv_pcmcia_probe(struct device *dev)
+static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
 {
 	int i, ret = 0;
 	struct pcmcia_low_level *ops;
 	struct skt_dev_info *sinfo;
 	struct soc_pcmcia_socket *skt;
 
-	if (!dev || !dev->platform_data)
+	ops = (struct pcmcia_low_level *)dev->dev.platform_data;
+	if (!ops)
 		return -ENODEV;
 
-	ops = (struct pcmcia_low_level *)dev->platform_data;
-
 	pxa2xx_drv_pcmcia_ops(ops);
 
 	sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
@@ -308,13 +310,6 @@ int __pxa2xx_drv_pcmcia_probe(struct device *dev)
 
 	return ret;
 }
-EXPORT_SYMBOL(__pxa2xx_drv_pcmcia_probe);
-
-
-static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
-{
-	return __pxa2xx_drv_pcmcia_probe(&dev->dev);
-}
 
 static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev)
 {

drivers/pcmcia/pxa2xx_base.h

-/* temporary measure */
-extern int __pxa2xx_drv_pcmcia_probe(struct device *);
-
 int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt);
 void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops);
 

drivers/pcmcia/pxa2xx_palmtc.c

@@ -67,7 +67,7 @@ static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 	if (ret)
 		goto err7;
 
-	skt->irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
+	skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
 	return 0;
 
 err7:

drivers/pcmcia/pxa2xx_stargate2.c

@@ -40,7 +40,7 @@ static struct pcmcia_irqs irqs[] = {
 
 static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
-	skt->irq = IRQ_GPIO(SG2_S0_GPIO_READY);
+	skt->socket.pci_irq = IRQ_GPIO(SG2_S0_GPIO_READY);
 	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
 }
 

drivers/pcmcia/pxa2xx_viper.c

 /*
- * VIPER PCMCIA support
+ * Viper/Zeus PCMCIA support
  *   Copyright 2004 Arcom Control Systems
  *
  * Maintained by Marc Zyngier <maz@misterjones.org>
- * 			      <marc.zyngier@altran.com>
  *
  * Based on:
  *   iPAQ h2200 PCMCIA support
@@ -26,37 +25,47 @@
 
 #include <asm/irq.h>
 
-#include <mach/viper.h>
-#include <asm/mach-types.h>
+#include <mach/arcom-pcmcia.h>
 
 #include "soc_common.h"
 #include "pxa2xx_base.h"
 
+static struct platform_device *arcom_pcmcia_dev;
+
 static struct pcmcia_irqs irqs[] = {
-	{ 0, gpio_to_irq(VIPER_CF_CD_GPIO),  "PCMCIA_CD" }
+	{
+		.sock	= 0,
+		.str	= "PCMCIA_CD",
+	},
 };
 
+static inline struct arcom_pcmcia_pdata *viper_get_pdata(void)
+{
+	return arcom_pcmcia_dev->dev.platform_data;
+}
+
 static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
+	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
 	unsigned long flags;
 
-	skt->socket.pci_irq = gpio_to_irq(VIPER_CF_RDY_GPIO);
+	skt->socket.pci_irq = gpio_to_irq(pdata->rdy_gpio);
+	irqs[0].irq = gpio_to_irq(pdata->cd_gpio);
 
-	if (gpio_request(VIPER_CF_CD_GPIO, "CF detect"))
+	if (gpio_request(pdata->cd_gpio, "CF detect"))
 		goto err_request_cd;
 
-	if (gpio_request(VIPER_CF_RDY_GPIO, "CF ready"))
+	if (gpio_request(pdata->rdy_gpio, "CF ready"))
 		goto err_request_rdy;
 
-	if (gpio_request(VIPER_CF_POWER_GPIO, "CF power"))
+	if (gpio_request(pdata->pwr_gpio, "CF power"))
 		goto err_request_pwr;
 
 	local_irq_save(flags);
 
-	/* GPIO 82 is the CF power enable line. initially off */
-	if (gpio_direction_output(VIPER_CF_POWER_GPIO, 0) ||
-	    gpio_direction_input(VIPER_CF_CD_GPIO) ||
-	    gpio_direction_input(VIPER_CF_RDY_GPIO)) {
+	if (gpio_direction_output(pdata->pwr_gpio, 0) ||
+	    gpio_direction_input(pdata->cd_gpio) ||
+	    gpio_direction_input(pdata->rdy_gpio)) {
 		local_irq_restore(flags);
 		goto err_dir;
 	}
@@ -66,13 +75,13 @@ static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
 
 err_dir:
-	gpio_free(VIPER_CF_POWER_GPIO);
+	gpio_free(pdata->pwr_gpio);
 err_request_pwr:
-	gpio_free(VIPER_CF_RDY_GPIO);
+	gpio_free(pdata->rdy_gpio);
 err_request_rdy:
-	gpio_free(VIPER_CF_CD_GPIO);
+	gpio_free(pdata->cd_gpio);
 err_request_cd:
-	printk(KERN_ERR "viper: Failed to setup PCMCIA GPIOs\n");
+	dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n");
 	return -1;
 }
 
@@ -81,17 +90,21 @@ static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
  */
 static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
+	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+
 	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
-	gpio_free(VIPER_CF_POWER_GPIO);
-	gpio_free(VIPER_CF_RDY_GPIO);
-	gpio_free(VIPER_CF_CD_GPIO);
+	gpio_free(pdata->pwr_gpio);
+	gpio_free(pdata->rdy_gpio);
+	gpio_free(pdata->cd_gpio);
 }
 
 static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 				      struct pcmcia_state *state)
 {
-	state->detect = gpio_get_value(VIPER_CF_CD_GPIO) ? 0 : 1;
-	state->ready  = gpio_get_value(VIPER_CF_RDY_GPIO) ? 1 : 0;
+	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+
+	state->detect = !gpio_get_value(pdata->cd_gpio);
+	state->ready  = !!gpio_get_value(pdata->rdy_gpio);
 	state->bvd1   = 1;
 	state->bvd2   = 1;
 	state->wrprot = 0;
@@ -102,20 +115,21 @@ static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 					 const socket_state_t *state)
 {
+	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+
 	/* Silently ignore Vpp, output enable, speaker enable. */
-	viper_cf_rst(state->flags & SS_RESET);
+	pdata->reset(state->flags & SS_RESET);
 
 	/* Apply socket voltage */
 	switch (state->Vcc) {
 	case 0:
-		gpio_set_value(VIPER_CF_POWER_GPIO, 0);
+		gpio_set_value(pdata->pwr_gpio, 0);
 		break;
 	case 33:
-		gpio_set_value(VIPER_CF_POWER_GPIO, 1);
+		gpio_set_value(pdata->pwr_gpio, 1);
 		break;
 	default:
-		printk(KERN_ERR "%s: Unsupported Vcc:%d\n",
-		       __func__, state->Vcc);
+		dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc);
 		return -1;
 	}
 
@@ -130,7 +144,7 @@ static void viper_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
 {
 }
 
-static struct pcmcia_low_level viper_pcmcia_ops __initdata = {
+static struct pcmcia_low_level viper_pcmcia_ops = {
 	.owner          	= THIS_MODULE,
 	.hw_init        	= viper_pcmcia_hw_init,
 	.hw_shutdown		= viper_pcmcia_hw_shutdown,
@@ -143,17 +157,25 @@ static struct pcmcia_low_level viper_pcmcia_ops __initdata = {
 
 static struct platform_device *viper_pcmcia_device;
 
-static int __init viper_pcmcia_init(void)
+static int viper_pcmcia_probe(struct platform_device *pdev)
 {
 	int ret;
 
-	if (!machine_is_viper())
-		return -ENODEV;
+	/* I can't imagine more than one device, but you never know... */
+	if (arcom_pcmcia_dev)
+		return -EEXIST;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
 
 	viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
 	if (!viper_pcmcia_device)
 		return -ENOMEM;
 
+	arcom_pcmcia_dev = pdev;
+
+	viper_pcmcia_device->dev.parent = &pdev->dev;
+
 	ret = platform_device_add_data(viper_pcmcia_device,
 				       &viper_pcmcia_ops,
 				       sizeof(viper_pcmcia_ops));
@@ -161,18 +183,49 @@ static int __init viper_pcmcia_init(void)
 	if (!ret)
 		ret = platform_device_add(viper_pcmcia_device);
 
-	if (ret)
+	if (ret) {
 		platform_device_put(viper_pcmcia_device);
+		arcom_pcmcia_dev = NULL;
+	}
 
 	return ret;
 }
 
-static void __exit viper_pcmcia_exit(void)
+static int viper_pcmcia_remove(struct platform_device *pdev)
 {
 	platform_device_unregister(viper_pcmcia_device);
+	arcom_pcmcia_dev = NULL;
+	return 0;
+}
+
+static struct platform_device_id viper_pcmcia_id_table[] = {
+	{ .name = "viper-pcmcia", },
+	{ .name = "zeus-pcmcia",  },
+	{ },
+};
+
+static struct platform_driver viper_pcmcia_driver = {
+	.probe		= viper_pcmcia_probe,
+	.remove		= viper_pcmcia_remove,
+	.driver		= {
+		.name	= "arcom-pcmcia",
+		.owner	= THIS_MODULE,
+	},
+	.id_table	= viper_pcmcia_id_table,
+};
+
+static int __init viper_pcmcia_init(void)
+{
+	return platform_driver_register(&viper_pcmcia_driver);
+}
+
+static void __exit viper_pcmcia_exit(void)
+{
+	return platform_driver_unregister(&viper_pcmcia_driver);
 }
 
 module_init(viper_pcmcia_init);
 module_exit(viper_pcmcia_exit);
 
+MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table);
 MODULE_LICENSE("GPL");