Skip to content

L
linux
Commit afc3bca4 authored by Rob Herring's avatar Rob Herring
Browse files
Options

dt-bindings: Use lower case hex in unit-addresses 

DT unit addresses should be lower case hex. Fix all the
binding examples.

Converted with the following command from Krzysztof Kozlowski:

sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt')
Signed-off-by: default avatarRob Herring <robh@kernel.org>
parent 81ee6f1e
Hide whitespace changes
Inline Side-by-side
Showing with 64 additions and 64 deletions
Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
View file @ afc3bca4
...@@ -55,7 +55,7 @@ Note: child nodes can be added for auto probing from device tree. ...@@ -55,7 +55,7 @@ Note: child nodes can be added for auto probing from device tree.
Example: adding device info in dtsi file Example: adding device info in dtsi file
adc: adc@12D10000 { adc: adc@12d10000 {
compatible = "samsung,exynos-adc-v1"; compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>; reg = <0x12D10000 0x100>;
interrupts = <0 106 0>; interrupts = <0 106 0>;
...@@ -71,7 +71,7 @@ adc: adc@12D10000 { ...@@ -71,7 +71,7 @@ adc: adc@12D10000 {
Example: adding device info in dtsi file for Exynos3250 with additional sclk Example: adding device info in dtsi file for Exynos3250 with additional sclk
adc: adc@126C0000 { adc: adc@126c0000 {
compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2; compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
reg = <0x126C0000 0x100>; reg = <0x126C0000 0x100>;
interrupts = <0 137 0>; interrupts = <0 137 0>;
...@@ -87,7 +87,7 @@ adc: adc@126C0000 { ...@@ -87,7 +87,7 @@ adc: adc@126C0000 {
Example: Adding child nodes in dts file Example: Adding child nodes in dts file
adc@12D10000 { adc@12d10000 {
/* NTC thermistor is a hwmon device */ /* NTC thermistor is a hwmon device */
ncp15wb473@0 { ncp15wb473@0 {
......
Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
View file @ afc3bca4
...@@ -72,7 +72,7 @@ Optional nodes: ...@@ -72,7 +72,7 @@ Optional nodes:
- compatible: only "samsung,secure-firmware" is currently supported - compatible: only "samsung,secure-firmware" is currently supported
- reg: address of non-secure SYSRAM used for communication with firmware - reg: address of non-secure SYSRAM used for communication with firmware
firmware@203F000 { firmware@203f000 {
compatible = "samsung,secure-firmware"; compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>; reg = <0x0203F000 0x1000>;
}; };
Documentation/devicetree/bindings/clock/exynos3250-clock.txt
View file @ afc3bca4
...@@ -32,7 +32,7 @@ Example 1: Examples of clock controller nodes are listed below. ...@@ -32,7 +32,7 @@ Example 1: Examples of clock controller nodes are listed below.
#clock-cells = <1>; #clock-cells = <1>;
}; };
cmu_dmc: clock-controller@105C0000 { cmu_dmc: clock-controller@105c0000 {
compatible = "samsung,exynos3250-cmu-dmc"; compatible = "samsung,exynos3250-cmu-dmc";
reg = <0x105C0000 0x2000>; reg = <0x105C0000 0x2000>;
#clock-cells = <1>; #clock-cells = <1>;
......
Documentation/devicetree/bindings/clock/exynos5260-clock.txt
View file @ afc3bca4
...@@ -180,7 +180,7 @@ Example 2: UART controller node that consumes the clock generated by the ...@@ -180,7 +180,7 @@ Example 2: UART controller node that consumes the clock generated by the
peri clock controller. Refer to the standard clock bindings for peri clock controller. Refer to the standard clock bindings for
information about 'clocks' and 'clock-names' property. information about 'clocks' and 'clock-names' property.
serial@12C00000 { serial@12c00000 {
compatible = "samsung,exynos4210-uart"; compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>; reg = <0x12C00000 0x100>;
interrupts = <0 146 0>; interrupts = <0 146 0>;
......
Documentation/devicetree/bindings/clock/exynos5410-clock.txt
View file @ afc3bca4
...@@ -41,7 +41,7 @@ Example 2: UART controller node that consumes the clock generated by the clock ...@@ -41,7 +41,7 @@ Example 2: UART controller node that consumes the clock generated by the clock
controller. Refer to the standard clock bindings for information controller. Refer to the standard clock bindings for information
about 'clocks' and 'clock-names' property. about 'clocks' and 'clock-names' property.
serial@12C20000 { serial@12c20000 {
compatible = "samsung,exynos4210-uart"; compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>; reg = <0x12C00000 0x100>;
interrupts = <0 51 0>; interrupts = <0 51 0>;
......
Documentation/devicetree/bindings/clock/exynos5433-clock.txt
View file @ afc3bca4
...@@ -472,7 +472,7 @@ Example 2: Examples of clock controller nodes are listed below. ...@@ -472,7 +472,7 @@ Example 2: Examples of clock controller nodes are listed below.
Example 3: UART controller node that consumes the clock generated by the clock Example 3: UART controller node that consumes the clock generated by the clock
controller. controller.
serial_0: serial@14C10000 { serial_0: serial@14c10000 {
compatible = "samsung,exynos5433-uart"; compatible = "samsung,exynos5433-uart";
reg = <0x14C10000 0x100>; reg = <0x14C10000 0x100>;
interrupts = <0 421 0>; interrupts = <0 421 0>;
......
Documentation/devicetree/bindings/crypto/atmel-crypto.txt
View file @ afc3bca4
...@@ -75,7 +75,7 @@ Required properties: ...@@ -75,7 +75,7 @@ Required properties:
- clock-frequency: must be present in the i2c controller node. - clock-frequency: must be present in the i2c controller node.
Example: Example:
atecc508a@C0 { atecc508a@c0 {
compatible = "atmel,atecc508a"; compatible = "atmel,atecc508a";
reg = <0xC0>; reg = <0xC0>;
}; };
Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
View file @ afc3bca4
...@@ -20,7 +20,7 @@ Optional properties: ...@@ -20,7 +20,7 @@ Optional properties:
Example : NoC Probe nodes in Device Tree are listed below. Example : NoC Probe nodes in Device Tree are listed below.
nocp_mem0_0: nocp@10CA1000 { nocp_mem0_0: nocp@10ca1000 {
compatible = "samsung,exynos5420-nocp"; compatible = "samsung,exynos5420-nocp";
reg = <0x10CA1000 0x200>; reg = <0x10CA1000 0x200>;
}; };
Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
View file @ afc3bca4
...@@ -54,7 +54,7 @@ Video interfaces: ...@@ -54,7 +54,7 @@ Video interfaces:
Example: Example:
dsi@11C80000 { dsi@11c80000 {
compatible = "samsung,exynos4210-mipi-dsi"; compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>; reg = <0x11C80000 0x10000>;
interrupts = <0 79 0>; interrupts = <0 79 0>;
......
Documentation/devicetree/bindings/display/st,stih4xx.txt
View file @ afc3bca4
...@@ -119,7 +119,7 @@ Example: ...@@ -119,7 +119,7 @@ Example:
/ { / {
... ...
vtg_main_slave: sti-vtg-main-slave@fe85A800 { vtg_main_slave: sti-vtg-main-slave@fe85a800 {
compatible = "st,vtg"; compatible = "st,vtg";
reg = <0xfe85A800 0x300>; reg = <0xfe85A800 0x300>;
interrupts = <GIC_SPI 175 IRQ_TYPE_NONE>; interrupts = <GIC_SPI 175 IRQ_TYPE_NONE>;
......
Documentation/devicetree/bindings/dma/ste-dma40.txt
View file @ afc3bca4
...@@ -15,7 +15,7 @@ Optional properties: ...@@ -15,7 +15,7 @@ Optional properties:
Example: Example:
dma: dma-controller@801C0000 { dma: dma-controller@801c0000 {
compatible = "stericsson,db8500-dma40", "stericsson,dma40"; compatible = "stericsson,db8500-dma40", "stericsson,dma40";
reg = <0x801C0000 0x1000 0x40010000 0x800>; reg = <0x801C0000 0x1000 0x40010000 0x800>;
reg-names = "base", "lcpa"; reg-names = "base", "lcpa";
......
Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
View file @ afc3bca4
...@@ -21,7 +21,7 @@ Documentation/devicetree/bindings/gpio/gpio.txt ...@@ -21,7 +21,7 @@ Documentation/devicetree/bindings/gpio/gpio.txt
Example: Example:
gpioa: gpio@FF140000 { gpioa: gpio@ff140000 {
compatible = "abilis,tb10x-gpio"; compatible = "abilis,tb10x-gpio";
interrupt-controller; interrupt-controller;
#interrupt-cells = <1>; #interrupt-cells = <1>;
......
Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt
View file @ afc3bca4
...@@ -27,7 +27,7 @@ Optional properties: ...@@ -27,7 +27,7 @@ Optional properties:
Example: Example:
gpio1: stp@E100BB0 { gpio1: stp@e100bb0 {
compatible = "lantiq,gpio-stp-xway"; compatible = "lantiq,gpio-stp-xway";
reg = <0xE100BB0 0x40>; reg = <0xE100BB0 0x40>;
#gpio-cells = <2>; #gpio-cells = <2>;
......
Documentation/devicetree/bindings/gpio/gpio.txt
View file @ afc3bca4
...@@ -290,7 +290,7 @@ pins 50..69. ...@@ -290,7 +290,7 @@ pins 50..69.
Example 2: Example 2:
gpio_pio_i: gpio-controller@14B0 { gpio_pio_i: gpio-controller@14b0 {
#gpio-cells = <2>; #gpio-cells = <2>;
compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank"; compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
reg = <0x1480 0x18>; reg = <0x1480 0x18>;
......
Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
View file @ afc3bca4
...@@ -54,7 +54,7 @@ Optional properties: ...@@ -54,7 +54,7 @@ Optional properties:
Example: Example:
i2c@12CA0000 { i2c@12ca0000 {
compatible = "acme,some-i2c-device"; compatible = "acme,some-i2c-device";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt
View file @ afc3bca4
...@@ -11,7 +11,7 @@ Required properties: ...@@ -11,7 +11,7 @@ Required properties:
Examples: Examples:
lpi2c7: lpi2c7@40A50000 { lpi2c7: lpi2c7@40a50000 {
compatible = "fsl,imx8dv-lpi2c"; compatible = "fsl,imx8dv-lpi2c";
reg = <0x40A50000 0x10000>; reg = <0x40A50000 0x10000>;
interrupt-parent = <&intc>; interrupt-parent = <&intc>;
......
Documentation/devicetree/bindings/input/samsung-keypad.txt
View file @ afc3bca4
...@@ -45,7 +45,7 @@ Optional Properties specific to linux: ...@@ -45,7 +45,7 @@ Optional Properties specific to linux:
Example: Example:
keypad@100A0000 { keypad@100a0000 {
compatible = "samsung,s5pv210-keypad"; compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>; reg = <0x100A0000 0x100>;
interrupts = <173>; interrupts = <173>;
......
Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
View file @ afc3bca4
...@@ -66,7 +66,7 @@ Example: An example of touchscreen node ...@@ -66,7 +66,7 @@ Example: An example of touchscreen node
reg = <0x180a6000 0xc30>; reg = <0x180a6000 0xc30>;
}; };
touchscreen: touchscreen@180A6000 { touchscreen: touchscreen@180a6000 {
compatible = "brcm,iproc-touchscreen"; compatible = "brcm,iproc-touchscreen";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
......
Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
View file @ afc3bca4
...@@ -56,7 +56,7 @@ Examples: ...@@ -56,7 +56,7 @@ Examples:
iommus = <&sysmmu_gsc0>; iommus = <&sysmmu_gsc0>;
}; };
sysmmu_gsc0: sysmmu@13E80000 { sysmmu_gsc0: sysmmu@13e80000 {
compatible = "samsung,exynos-sysmmu"; compatible = "samsung,exynos-sysmmu";
reg = <0x13E80000 0x1000>; reg = <0x13E80000 0x1000>;
interrupt-parent = <&combiner>; interrupt-parent = <&combiner>;
......
Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
View file @ afc3bca4
...@@ -124,7 +124,7 @@ dsp { ...@@ -124,7 +124,7 @@ dsp {
}; };
/* AM33xx */ /* AM33xx */
mailbox: mailbox@480C8000 { mailbox: mailbox@480c8000 {
compatible = "ti,omap4-mailbox"; compatible = "ti,omap4-mailbox";
reg = <0x480C8000 0x200>; reg = <0x480C8000 0x200>;
interrupts = <77>; interrupts = <77>;
......
Documentation/devicetree/bindings/media/s5p-cec.txt
View file @ afc3bca4
...@@ -23,7 +23,7 @@ Optional: ...@@ -23,7 +23,7 @@ Optional:
Example: Example:
hdmicec: cec@100B0000 { hdmicec: cec@100b0000 {
compatible = "samsung,s5p-cec"; compatible = "samsung,s5p-cec";
reg = <0x100B0000 0x200>; reg = <0x100B0000 0x200>;
interrupts = <0 114 0>; interrupts = <0 114 0>;
......
Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
View file @ afc3bca4
...@@ -62,7 +62,7 @@ For more details see description of the SPI busses bindings ...@@ -62,7 +62,7 @@ For more details see description of the SPI busses bindings
Example: Example:
i2c@138A000000 { i2c@138a000000 {
... ...
s5c73m3@3c { s5c73m3@3c {
compatible = "samsung,s5c73m3"; compatible = "samsung,s5c73m3";
......
Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
View file @ afc3bca4
...@@ -138,7 +138,7 @@ from the corresponding HW reg. ...@@ -138,7 +138,7 @@ from the corresponding HW reg.
Example for aemif, davinci nand and nor flash chip select shown below. Example for aemif, davinci nand and nor flash chip select shown below.
memory-controller@21000A00 { memory-controller@21000a00 {
compatible = "ti,davinci-aemif"; compatible = "ti,davinci-aemif";
#address-cells = <2>; #address-cells = <2>;
#size-cells = <1>; #size-cells = <1>;
......
Documentation/devicetree/bindings/mfd/cros-ec.txt
View file @ afc3bca4
...@@ -41,7 +41,7 @@ Optional properties (all): ...@@ -41,7 +41,7 @@ Optional properties (all):
Example for I2C: Example for I2C:
i2c@12CA0000 { i2c@12ca0000 {
cros-ec@1e { cros-ec@1e {
reg = <0x1e>; reg = <0x1e>;
compatible = "google,cros-ec-i2c"; compatible = "google,cros-ec-i2c";
......
Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
View file @ afc3bca4
...@@ -23,7 +23,7 @@ Optional subnodes: ...@@ -23,7 +23,7 @@ Optional subnodes:
Example: Example:
mlc: flash@200A8000 { mlc: flash@200a8000 {
compatible = "nxp,lpc3220-mlc"; compatible = "nxp,lpc3220-mlc";
reg = <0x200A8000 0x11000>; reg = <0x200A8000 0x11000>;
interrupts = <11 0>; interrupts = <11 0>;
......
Documentation/devicetree/bindings/net/cpsw.txt
View file @ afc3bca4
...@@ -61,7 +61,7 @@ file. ...@@ -61,7 +61,7 @@ file.
Examples: Examples:
mac: ethernet@4A100000 { mac: ethernet@4a100000 {
compatible = "ti,cpsw"; compatible = "ti,cpsw";
reg = <0x4A100000 0x1000>; reg = <0x4A100000 0x1000>;
interrupts = <55 0x4>; interrupts = <55 0x4>;
...@@ -91,7 +91,7 @@ Examples: ...@@ -91,7 +91,7 @@ Examples:
}; };
(or) (or)
mac: ethernet@4A100000 { mac: ethernet@4a100000 {
compatible = "ti,cpsw"; compatible = "ti,cpsw";
ti,hwmods = "cpgmac0"; ti,hwmods = "cpgmac0";
cpdma_channels = <8>; cpdma_channels = <8>;
......
Documentation/devicetree/bindings/net/davinci-mdio.txt
View file @ afc3bca4
...@@ -21,7 +21,7 @@ file. ...@@ -21,7 +21,7 @@ file.
Examples: Examples:
mdio: davinci_mdio@4A101000 { mdio: davinci_mdio@4a101000 {
compatible = "ti,davinci_mdio"; compatible = "ti,davinci_mdio";
reg = <0x4A101000 0x1000>; reg = <0x4A101000 0x1000>;
bus_freq = <1000000>; bus_freq = <1000000>;
...@@ -29,7 +29,7 @@ Examples: ...@@ -29,7 +29,7 @@ Examples:
(or) (or)
mdio: davinci_mdio@4A101000 { mdio: davinci_mdio@4a101000 {
compatible = "ti,davinci_mdio"; compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio"; ti,hwmods = "davinci_mdio";
bus_freq = <1000000>; bus_freq = <1000000>;
......
Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
View file @ afc3bca4
...@@ -136,7 +136,7 @@ Clock Properties: ...@@ -136,7 +136,7 @@ Clock Properties:
Example: Example:
ptp_clock@24E00 { ptp_clock@24e00 {
compatible = "fsl,etsec-ptp"; compatible = "fsl,etsec-ptp";
reg = <0x24E00 0xB0>; reg = <0x24E00 0xB0>;
interrupts = <12 0x8 13 0x8>; interrupts = <12 0x8 13 0x8>;
......
Documentation/devicetree/bindings/phy/ti-phy.txt
View file @ afc3bca4
...@@ -120,7 +120,7 @@ usb3phy@4a084400 { ...@@ -120,7 +120,7 @@ usb3phy@4a084400 {
"refclk"; "refclk";
}; };
sata_phy: phy@4A096000 { sata_phy: phy@4a096000 {
compatible = "ti,phy-pipe3-sata"; compatible = "ti,phy-pipe3-sata";
reg = <0x4A096000 0x80>, /* phy_rx */ reg = <0x4A096000 0x80>, /* phy_rx */
<0x4A096400 0x64>, /* phy_tx */ <0x4A096400 0x64>, /* phy_tx */
......
Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
View file @ afc3bca4
...@@ -49,7 +49,7 @@ explained in Documentation/devicetree/bindings/gpio/gpio.txt. ...@@ -49,7 +49,7 @@ explained in Documentation/devicetree/bindings/gpio/gpio.txt.
Example Example
------- -------
iomux: iomux@FF10601c { iomux: iomux@ff10601c {
compatible = "abilis,tb10x-iomux"; compatible = "abilis,tb10x-iomux";
reg = <0xFF10601c 0x4>; reg = <0xFF10601c 0x4>;
pctl_gpio_a: pctl-gpio-a { pctl_gpio_a: pctl-gpio-a {
...@@ -59,7 +59,7 @@ iomux: iomux@FF10601c { ...@@ -59,7 +59,7 @@ iomux: iomux@FF10601c {
abilis,function = "uart0"; abilis,function = "uart0";
}; };
}; };
uart@FF100000 { uart@ff100000 {
compatible = "snps,dw-apb-uart"; compatible = "snps,dw-apb-uart";
reg = <0xFF100000 0x100>; reg = <0xFF100000 0x100>;
clock-frequency = <166666666>; clock-frequency = <166666666>;
...@@ -69,7 +69,7 @@ uart@FF100000 { ...@@ -69,7 +69,7 @@ uart@FF100000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pctl_uart0>; pinctrl-0 = <&pctl_uart0>;
}; };
gpioa: gpio@FF140000 { gpioa: gpio@ff140000 {
compatible = "abilis,tb10x-gpio"; compatible = "abilis,tb10x-gpio";
reg = <0xFF140000 0x1000>; reg = <0xFF140000 0x1000>;
gpio-controller; gpio-controller;
......
Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
View file @ afc3bca4
...@@ -152,7 +152,7 @@ resetn ...@@ -152,7 +152,7 @@ resetn
Example: Example:
-------- --------
pinctrl@18101C00 { pinctrl@18101c00 {
compatible = "img,pistachio-system-pinctrl"; compatible = "img,pistachio-system-pinctrl";
reg = <0x18101C00 0x400>; reg = <0x18101C00 0x400>;
......
Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
View file @ afc3bca4
...@@ -163,7 +163,7 @@ Valid values for xRX300 pin names: ...@@ -163,7 +163,7 @@ Valid values for xRX300 pin names:
io42-io43,io48-io61. io42-io43,io48-io61.
Example: Example:
gpio: pinmux@E100B10 { gpio: pinmux@e100b10 {
compatible = "lantiq,danube-pinctrl"; compatible = "lantiq,danube-pinctrl";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&state_default>; pinctrl-0 = <&state_default>;
......
Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
View file @ afc3bca4
...@@ -81,7 +81,7 @@ Examples: ...@@ -81,7 +81,7 @@ Examples:
reg = <0 0x10005000 0 0x1000>; reg = <0 0x10005000 0 0x1000>;
}; };
syscfg_pctl_b: syscfg_pctl_b@1020C020 { syscfg_pctl_b: syscfg_pctl_b@1020c020 {
compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon"; compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
reg = <0 0x1020C020 0 0x1000>; reg = <0 0x1020C020 0 0x1000>;
}; };
......
Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
View file @ afc3bca4
...@@ -223,37 +223,37 @@ lac-portals { ...@@ -223,37 +223,37 @@ lac-portals {
reg = <0x9000 0x1000>; reg = <0x9000 0x1000>;
}; };
lportal10: lac-portal@A000 { lportal10: lac-portal@a000 {
compatible = "fsl,interlaken-lac-portal-v1.0"; compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x20E>; fsl,liodn = <0x20E>;
reg = <0xA000 0x1000>; reg = <0xA000 0x1000>;
}; };
lportal11: lac-portal@B000 { lportal11: lac-portal@b000 {
compatible = "fsl,interlaken-lac-portal-v1.0"; compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x20F>; fsl,liodn = <0x20F>;
reg = <0xB000 0x1000>; reg = <0xB000 0x1000>;
}; };
lportal12: lac-portal@C000 { lportal12: lac-portal@c000 {
compatible = "fsl,interlaken-lac-portal-v1.0"; compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x210>; fsl,liodn = <0x210>;
reg = <0xC000 0x1000>; reg = <0xC000 0x1000>;
}; };
lportal13: lac-portal@D000 { lportal13: lac-portal@d000 {
compatible = "fsl,interlaken-lac-portal-v1.0"; compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x211>; fsl,liodn = <0x211>;
reg = <0xD000 0x1000>; reg = <0xD000 0x1000>;
}; };
lportal14: lac-portal@E000 { lportal14: lac-portal@e000 {
compatible = "fsl,interlaken-lac-portal-v1.0"; compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x212>; fsl,liodn = <0x212>;
reg = <0xE000 0x1000>; reg = <0xE000 0x1000>;
}; };
lportal15: lac-portal@F000 { lportal15: lac-portal@f000 {
compatible = "fsl,interlaken-lac-portal-v1.0"; compatible = "fsl,interlaken-lac-portal-v1.0";
fsl,liodn = <0x213>; fsl,liodn = <0x213>;
reg = <0xF000 0x1000>; reg = <0xF000 0x1000>;
......
Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
View file @ afc3bca4
...@@ -10,7 +10,7 @@ Required properties: ...@@ -10,7 +10,7 @@ Required properties:
- clocks: Must contain an entry for peripheral clock. - clocks: Must contain an entry for peripheral clock.
Example: Example:
vrefbuf: regulator@58003C00 { vrefbuf: regulator@58003c00 {
compatible = "st,stm32-vrefbuf"; compatible = "st,stm32-vrefbuf";
reg = <0x58003C00 0x8>; reg = <0x58003C00 0x8>;
clocks = <&rcc VREF_CK>; clocks = <&rcc VREF_CK>;
......
Documentation/devicetree/bindings/serial/lantiq_asc.txt
View file @ afc3bca4
...@@ -8,7 +8,7 @@ Required properties: ...@@ -8,7 +8,7 @@ Required properties:
Example: Example:
asc1: serial@E100C00 { asc1: serial@e100c00 {
compatible = "lantiq,asc"; compatible = "lantiq,asc";
reg = <0xE100C00 0x400>; reg = <0xE100C00 0x400>;
interrupt-parent = <&icu0>; interrupt-parent = <&icu0>;
......
Documentation/devicetree/bindings/sound/img,i2s-out.txt
View file @ afc3bca4
...@@ -35,7 +35,7 @@ Optional Properties: ...@@ -35,7 +35,7 @@ Optional Properties:
Example: Example:
i2s_out: i2s-out@18100A00 { i2s_out: i2s-out@18100a00 {
compatible = "img,i2s-out"; compatible = "img,i2s-out";
reg = <0x18100A00 0x200>; reg = <0x18100A00 0x200>;
interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>;
......
Documentation/devicetree/bindings/sound/img,parallel-out.txt
View file @ afc3bca4
...@@ -29,7 +29,7 @@ Optional Properties: ...@@ -29,7 +29,7 @@ Optional Properties:
Example: Example:
parallel_out: parallel-out@18100C00 { parallel_out: parallel-out@18100c00 {
compatible = "img,parallel-out"; compatible = "img,parallel-out";
reg = <0x18100C00 0x100>; reg = <0x18100C00 0x100>;
interrupts = <GIC_SHARED 19 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SHARED 19 IRQ_TYPE_LEVEL_HIGH>;
......
Documentation/devicetree/bindings/sound/img,spdif-in.txt
View file @ afc3bca4
...@@ -29,7 +29,7 @@ Optional Properties: ...@@ -29,7 +29,7 @@ Optional Properties:
Example: Example:
spdif_in: spdif-in@18100E00 { spdif_in: spdif-in@18100e00 {
compatible = "img,spdif-in"; compatible = "img,spdif-in";
reg = <0x18100E00 0x100>; reg = <0x18100E00 0x100>;
interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
......
Documentation/devicetree/bindings/sound/img,spdif-out.txt
View file @ afc3bca4
...@@ -29,7 +29,7 @@ Optional Properties: ...@@ -29,7 +29,7 @@ Optional Properties:
Example: Example:
spdif_out: spdif-out@18100D00 { spdif_out: spdif-out@18100d00 {
compatible = "img,spdif-out"; compatible = "img,spdif-out";
reg = <0x18100D00 0x100>; reg = <0x18100D00 0x100>;
interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>;
......
Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
View file @ afc3bca4
...@@ -51,7 +51,7 @@ Optional properties: ...@@ -51,7 +51,7 @@ Optional properties:
Example: Example:
sti_uni_player1: sti-uni-player@8D81000 { sti_uni_player1: sti-uni-player@8d81000 {
compatible = "st,stih407-uni-player-hdmi"; compatible = "st,stih407-uni-player-hdmi";
#sound-dai-cells = <0>; #sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>; st,syscfg = <&syscfg_core>;
...@@ -63,7 +63,7 @@ Example: ...@@ -63,7 +63,7 @@ Example:
st,tdm-mode = <1>; st,tdm-mode = <1>;
}; };
sti_uni_player2: sti-uni-player@8D82000 { sti_uni_player2: sti-uni-player@8d82000 {
compatible = "st,stih407-uni-player-pcm-out"; compatible = "st,stih407-uni-player-pcm-out";
#sound-dai-cells = <0>; #sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>; st,syscfg = <&syscfg_core>;
...@@ -74,7 +74,7 @@ Example: ...@@ -74,7 +74,7 @@ Example:
dma-names = "tx"; dma-names = "tx";
}; };
sti_uni_player3: sti-uni-player@8D85000 { sti_uni_player3: sti-uni-player@8d85000 {
compatible = "st,stih407-uni-player-spdif"; compatible = "st,stih407-uni-player-spdif";
#sound-dai-cells = <0>; #sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>; st,syscfg = <&syscfg_core>;
...@@ -85,7 +85,7 @@ Example: ...@@ -85,7 +85,7 @@ Example:
dma-names = "tx"; dma-names = "tx";
}; };
sti_uni_reader1: sti-uni-reader@8D84000 { sti_uni_reader1: sti-uni-reader@8d84000 {
compatible = "st,stih407-uni-reader-hdmi"; compatible = "st,stih407-uni-reader-hdmi";
#sound-dai-cells = <0>; #sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>; st,syscfg = <&syscfg_core>;
......
Documentation/devicetree/bindings/spi/spi-davinci.txt
View file @ afc3bca4
...@@ -68,7 +68,7 @@ SPI_SOMI/SIMO+-----------------+ +----------- ...@@ -68,7 +68,7 @@ SPI_SOMI/SIMO+-----------------+ +-----------
Example of a NOR flash slave device (n25q032) connected to DaVinci Example of a NOR flash slave device (n25q032) connected to DaVinci
SPI controller device over the SPI bus. SPI controller device over the SPI bus.
spi0:spi@20BF0000 { spi0:spi@20bf0000 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
compatible = "ti,dm6446-spi"; compatible = "ti,dm6446-spi";
......
Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
View file @ afc3bca4
...@@ -16,7 +16,7 @@ Optional properties: ...@@ -16,7 +16,7 @@ Optional properties:
Example: Example:
spi: spi@E100800 { spi: spi@e100800 {
compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi"; compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
reg = <0xE100800 0x100>; reg = <0xE100800 0x100>;
interrupt-parent = <&icu0>; interrupt-parent = <&icu0>;
......
Documentation/devicetree/bindings/thermal/exynos-thermal.txt
View file @ afc3bca4
...@@ -70,7 +70,7 @@ Following properties are mandatory (depending on SoC): ...@@ -70,7 +70,7 @@ Following properties are mandatory (depending on SoC):
Example 1): Example 1):
tmu@100C0000 { tmu@100c0000 {
compatible = "samsung,exynos4412-tmu"; compatible = "samsung,exynos4412-tmu";
interrupt-parent = <&combiner>; interrupt-parent = <&combiner>;
reg = <0x100C0000 0x100>; reg = <0x100C0000 0x100>;
......
Documentation/devicetree/bindings/thermal/thermal.txt
View file @ afc3bca4
...@@ -252,7 +252,7 @@ ocp { ...@@ -252,7 +252,7 @@ ocp {
/* /*
* A simple IC with a single bandgap temperature sensor. * A simple IC with a single bandgap temperature sensor.
*/ */
bandgap0: bandgap@0000ED00 { bandgap0: bandgap@0000ed00 {
... ...
#thermal-sensor-cells = <0>; #thermal-sensor-cells = <0>;
}; };
...@@ -330,7 +330,7 @@ ocp { ...@@ -330,7 +330,7 @@ ocp {
/* /*
* A simple IC with several bandgap temperature sensors. * A simple IC with several bandgap temperature sensors.
*/ */
bandgap0: bandgap@0000ED00 { bandgap0: bandgap@0000ed00 {
... ...
#thermal-sensor-cells = <1>; #thermal-sensor-cells = <1>;
}; };
...@@ -458,7 +458,7 @@ ocp { ...@@ -458,7 +458,7 @@ ocp {
/* /*
* A simple IC with a single bandgap temperature sensor. * A simple IC with a single bandgap temperature sensor.
*/ */
bandgap0: bandgap@0000ED00 { bandgap0: bandgap@0000ed00 {
... ...
#thermal-sensor-cells = <0>; #thermal-sensor-cells = <0>;
}; };
......
Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
View file @ afc3bca4
...@@ -51,7 +51,7 @@ Example 2: In this example, the timer interrupts are connected to two separate ...@@ -51,7 +51,7 @@ Example 2: In this example, the timer interrupts are connected to two separate
interrupt controllers. Hence, an interrupt-map is created to map interrupt controllers. Hence, an interrupt-map is created to map
the interrupts to the respective interrupt controllers. the interrupts to the respective interrupt controllers.
mct@101C0000 { mct@101c0000 {
compatible = "samsung,exynos4210-mct"; compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>; reg = <0x101C0000 0x800>;
interrupt-parent = <&mct_map>; interrupt-parent = <&mct_map>;
......
Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
View file @ afc3bca4
...@@ -10,7 +10,7 @@ Optional properties: ...@@ -10,7 +10,7 @@ Optional properties:
Example: Example:
watchdog@4003C000 { watchdog@4003c000 {
compatible = "nxp,pnx4008-wdt"; compatible = "nxp,pnx4008-wdt";
reg = <0x4003C000 0x1000>; reg = <0x4003C000 0x1000>;
timeout-sec = <10>; timeout-sec = <10>;
......
Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
View file @ afc3bca4
...@@ -25,7 +25,7 @@ Optional properties: ...@@ -25,7 +25,7 @@ Optional properties:
Example: Example:
watchdog@101D0000 { watchdog@101d0000 {
compatible = "samsung,exynos5250-wdt"; compatible = "samsung,exynos5250-wdt";
reg = <0x101D0000 0x100>; reg = <0x101D0000 0x100>;
interrupts = <0 42 0>; interrupts = <0 42 0>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7