Commit afe9cbb1 authored by Uwe Kleine-König's avatar Uwe Kleine-König Committed by Greg Kroah-Hartman

serial: imx: drop support for IRDA

Support for IRDA was added in 2009 in commit v2.6.31-rc1~399^2~2. There
are no in-tree users.
Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent f95661b2
......@@ -6,9 +6,6 @@
* Author: Sascha Hauer <sascha@saschahauer.de>
* Copyright (C) 2004 Pengutronix
*
* Author: Fabian Godehardt (added IrDA support for iMX)
* Copyright (C) 2009 emlix GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
......@@ -201,7 +198,6 @@ struct imx_port {
unsigned int old_status;
unsigned int have_rtscts:1;
unsigned int dte_mode:1;
unsigned int use_irda:1;
unsigned int irda_inv_rx:1;
unsigned int irda_inv_tx:1;
unsigned short trcv_delay; /* transceiver delay */
......@@ -228,12 +224,6 @@ struct imx_port_ucrs {
unsigned int ucr3;
};
#ifdef CONFIG_IRDA
#define USE_IRDA(sport) ((sport)->use_irda)
#else
#define USE_IRDA(sport) (0)
#endif
static struct imx_uart_data imx_uart_devdata[] = {
[IMX1_UART] = {
.uts_reg = IMX1_UTS,
......@@ -368,48 +358,6 @@ static void imx_stop_tx(struct uart_port *port)
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
if (USE_IRDA(sport)) {
/* half duplex - wait for end of transmission */
int n = 256;
while ((--n > 0) &&
!(readl(sport->port.membase + USR2) & USR2_TXDC)) {
udelay(5);
barrier();
}
/*
* irda transceiver - wait a bit more to avoid
* cutoff, hardware dependent
*/
udelay(sport->trcv_delay);
/*
* half duplex - reactivate receive mode,
* flush receive pipe echo crap
*/
if (readl(sport->port.membase + USR2) & USR2_TXDC) {
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
writel(temp, sport->port.membase + UCR1);
temp = readl(sport->port.membase + UCR4);
temp &= ~(UCR4_TCEN);
writel(temp, sport->port.membase + UCR4);
while (readl(sport->port.membase + URXD0) &
URXD_CHARRDY)
barrier();
temp = readl(sport->port.membase + UCR1);
temp |= UCR1_RRDYEN;
writel(temp, sport->port.membase + UCR1);
temp = readl(sport->port.membase + UCR4);
temp |= UCR4_DREN;
writel(temp, sport->port.membase + UCR4);
}
return;
}
/*
* We are maybe in the SMP context, so if the DMA TX thread is running
* on other cpu, we have to wait for it to finish.
......@@ -612,32 +560,11 @@ static void imx_start_tx(struct uart_port *port)
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
if (USE_IRDA(sport)) {
/* half duplex in IrDA mode; have to disable receive mode */
temp = readl(sport->port.membase + UCR4);
temp &= ~(UCR4_DREN);
writel(temp, sport->port.membase + UCR4);
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_RRDYEN);
writel(temp, sport->port.membase + UCR1);
}
if (!sport->dma_is_enabled) {
temp = readl(sport->port.membase + UCR1);
writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
}
if (USE_IRDA(sport)) {
temp = readl(sport->port.membase + UCR1);
temp |= UCR1_TRDYEN;
writel(temp, sport->port.membase + UCR1);
temp = readl(sport->port.membase + UCR4);
temp |= UCR4_TCEN;
writel(temp, sport->port.membase + UCR4);
}
if (sport->dma_is_enabled) {
if (sport->port.x_char) {
/* We have X-char to send, so enable TX IRQ and
......@@ -1148,9 +1075,6 @@ static int imx_startup(struct uart_port *port)
*/
temp = readl(sport->port.membase + UCR4);
if (USE_IRDA(sport))
temp |= UCR4_IRSC;
/* set the trigger level for CTS */
temp &= ~(UCR4_CTSTL_MASK << UCR4_CTSTL_SHF);
temp |= CTSTL << UCR4_CTSTL_SHF;
......@@ -1186,11 +1110,6 @@ static int imx_startup(struct uart_port *port)
temp = readl(sport->port.membase + UCR1);
temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
if (USE_IRDA(sport)) {
temp |= UCR1_IREN;
temp &= ~(UCR1_RTSDEN);
}
writel(temp, sport->port.membase + UCR1);
temp = readl(sport->port.membase + UCR4);
......@@ -1209,38 +1128,12 @@ static int imx_startup(struct uart_port *port)
writel(temp, sport->port.membase + UCR3);
}
if (USE_IRDA(sport)) {
temp = readl(sport->port.membase + UCR4);
if (sport->irda_inv_rx)
temp |= UCR4_INVR;
else
temp &= ~(UCR4_INVR);
writel(temp | UCR4_DREN, sport->port.membase + UCR4);
temp = readl(sport->port.membase + UCR3);
if (sport->irda_inv_tx)
temp |= UCR3_INVT;
else
temp &= ~(UCR3_INVT);
writel(temp, sport->port.membase + UCR3);
}
/*
* Enable modem status interrupts
*/
imx_enable_ms(&sport->port);
spin_unlock_irqrestore(&sport->port.lock, flags);
if (USE_IRDA(sport)) {
struct imxuart_platform_data *pdata;
pdata = dev_get_platdata(sport->port.dev);
sport->irda_inv_rx = pdata->irda_inv_rx;
sport->irda_inv_tx = pdata->irda_inv_tx;
sport->trcv_delay = pdata->transceiver_delay;
if (pdata->irda_enable)
pdata->irda_enable(1);
}
return 0;
}
......@@ -1276,13 +1169,6 @@ static void imx_shutdown(struct uart_port *port)
writel(temp, sport->port.membase + UCR2);
spin_unlock_irqrestore(&sport->port.lock, flags);
if (USE_IRDA(sport)) {
struct imxuart_platform_data *pdata;
pdata = dev_get_platdata(sport->port.dev);
if (pdata->irda_enable)
pdata->irda_enable(0);
}
/*
* Stop our timer.
*/
......@@ -1295,8 +1181,6 @@ static void imx_shutdown(struct uart_port *port)
spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
if (USE_IRDA(sport))
temp &= ~(UCR1_IREN);
writel(temp, sport->port.membase + UCR1);
spin_unlock_irqrestore(&sport->port.lock, flags);
......@@ -1450,24 +1334,16 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
sport->port.membase + UCR2);
old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
if (USE_IRDA(sport)) {
/*
* use maximum available submodule frequency to
* avoid missing short pulses due to low sampling rate
*/
/* custom-baudrate handling */
div = sport->port.uartclk / (baud * 16);
if (baud == 38400 && quot != div)
baud = sport->port.uartclk / (quot * 16);
div = sport->port.uartclk / (baud * 16);
if (div > 7)
div = 7;
if (!div)
div = 1;
} else {
/* custom-baudrate handling */
div = sport->port.uartclk / (baud * 16);
if (baud == 38400 && quot != div)
baud = sport->port.uartclk / (quot * 16);
div = sport->port.uartclk / (baud * 16);
if (div > 7)
div = 7;
if (!div)
div = 1;
}
rational_best_approximation(16 * div * baud, sport->port.uartclk,
1 << 16, 1 << 16, &num, &denom);
......@@ -1906,9 +1782,6 @@ static int serial_imx_probe_dt(struct imx_port *sport,
if (of_get_property(np, "fsl,uart-has-rtscts", NULL))
sport->have_rtscts = 1;
if (of_get_property(np, "fsl,irda-mode", NULL))
sport->use_irda = 1;
if (of_get_property(np, "fsl,dte-mode", NULL))
sport->dte_mode = 1;
......@@ -1937,9 +1810,6 @@ static void serial_imx_probe_pdata(struct imx_port *sport,
if (pdata->flags & IMXUART_HAVE_RTSCTS)
sport->have_rtscts = 1;
if (pdata->flags & IMXUART_IRDA)
sport->use_irda = 1;
}
static int serial_imx_probe(struct platform_device *pdev)
......@@ -2012,15 +1882,6 @@ static int serial_imx_probe(struct platform_device *pdev)
dev_name(&pdev->dev), sport);
if (ret)
return ret;
/* do not use RTS IRQ on IrDA */
if (!USE_IRDA(sport)) {
ret = devm_request_irq(&pdev->dev, rtsirq,
imx_rtsint, 0,
dev_name(&pdev->dev), sport);
if (ret)
return ret;
}
} else {
ret = devm_request_irq(&pdev->dev, rxirq, imx_int, 0,
dev_name(&pdev->dev), sport);
......
......@@ -20,14 +20,9 @@
#define ASMARM_ARCH_UART_H
#define IMXUART_HAVE_RTSCTS (1<<0)
#define IMXUART_IRDA (1<<1)
struct imxuart_platform_data {
unsigned int flags;
void (*irda_enable)(int enable);
unsigned int irda_inv_rx:1;
unsigned int irda_inv_tx:1;
unsigned short transceiver_delay;
};
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment