Commit aff0dff9 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: cb_pcimdas: add 8254 timer (pacer) support

The hardware has an 8254 timer/counter. Channe; 0 is available as a
generic counter/timer with the clock, gate, and output signals all
availabe on the main 37 pin connector. Channels 1 and 2 are used for
the pacer.

Add support for the 8254 timer.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent e56d03de
......@@ -953,6 +953,7 @@ config COMEDI_CB_PCIDDA
config COMEDI_CB_PCIMDAS
tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
select COMEDI_8254
select COMEDI_8255
---help---
Enable support for ComputerBoards/MeasurementComputing PCI Migration
......
......@@ -47,6 +47,7 @@
#include "../comedidev.h"
#include "comedi_8254.h"
#include "plx9052.h"
#include "8255.h"
......@@ -273,6 +274,57 @@ static int cb_pcimdas_do_insn_write(struct comedi_device *dev,
return insn->n;
}
static int cb_pcimdas_counter_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct cb_pcimdas_private *devpriv = dev->private;
unsigned int ctrl;
switch (data[0]) {
case INSN_CONFIG_SET_CLOCK_SRC:
switch (data[1]) {
case 0: /* internal 100 kHz clock */
ctrl = PCIMDAS_USER_CNTR_CTR1_CLK_SEL;
break;
case 1: /* external clk on pin 21 */
ctrl = 0;
break;
default:
return -EINVAL;
}
outb(ctrl, devpriv->BADR3 + PCIMDAS_USER_CNTR_REG);
break;
case INSN_CONFIG_GET_CLOCK_SRC:
ctrl = inb(devpriv->BADR3 + PCIMDAS_USER_CNTR_REG);
if (ctrl & PCIMDAS_USER_CNTR_CTR1_CLK_SEL) {
data[1] = 0;
data[2] = I8254_OSC_BASE_100KHZ;
} else {
data[1] = 1;
data[2] = 0;
}
break;
default:
return -EINVAL;
}
return insn->n;
}
static unsigned int cb_pcimdas_pacer_clk(struct comedi_device *dev)
{
struct cb_pcimdas_private *devpriv = dev->private;
unsigned int status;
/* The Pacer Clock jumper selects a 10 MHz or 1 MHz clock */
status = inb(devpriv->BADR3 + PCIMDAS_STATUS_REG);
if (status & PCIMDAS_STATUS_CLK)
return I8254_OSC_BASE_10MHZ;
return I8254_OSC_BASE_1MHZ;
}
static bool cb_pcimdas_is_ai_se(struct comedi_device *dev)
{
struct cb_pcimdas_private *devpriv = dev->private;
......@@ -321,7 +373,13 @@ static int cb_pcimdas_auto_attach(struct comedi_device *dev,
devpriv->BADR3 = pci_resource_start(pcidev, 3);
dev->iobase = pci_resource_start(pcidev, 4);
ret = comedi_alloc_subdevices(dev, 5);
dev->pacer = comedi_8254_init(devpriv->BADR3 + PCIMDAS_8254_BASE,
cb_pcimdas_pacer_clk(dev),
I8254_IO8, 0);
if (!dev->pacer)
return -ENOMEM;
ret = comedi_alloc_subdevices(dev, 6);
if (ret)
return ret;
......@@ -378,6 +436,16 @@ static int cb_pcimdas_auto_attach(struct comedi_device *dev,
s->range_table = &range_digital;
s->insn_write = cb_pcimdas_do_insn_write;
/* Counter subdevice (8254) */
s = &dev->subdevices[5];
comedi_8254_subdevice_init(s, dev->pacer);
dev->pacer->insn_config = cb_pcimdas_counter_insn_config;
/* counters 1 and 2 are used internally for the pacer */
comedi_8254_set_busy(dev->pacer, 1, true);
comedi_8254_set_busy(dev->pacer, 2, true);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment