Commit b030ed2f authored by Yuval Mintz's avatar Yuval Mintz Committed by David S. Miller

bnx2x: Implement PCI shutdown

Implement the PCI shutdown callback to support un-orderly shutdown, i.e.,
shutdowns in which the remove callback will not be called.

Due to the lack of this functionality, when an un-orderly shutdown occurred,
it was possible for wake-on-lan to remain disabled.

This is now fixed as the callback introduces the correct place in which
`system_state' can be queried and wake-on-lan be configured accordingly.
Signed-off-by: default avatarYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: default avatarAriel Elior <ariele@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 86800194
......@@ -12721,17 +12721,11 @@ static int bnx2x_init_one(struct pci_dev *pdev,
return rc;
}
static void bnx2x_remove_one(struct pci_dev *pdev)
static void __bnx2x_remove(struct pci_dev *pdev,
struct net_device *dev,
struct bnx2x *bp,
bool remove_netdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct bnx2x *bp;
if (!dev) {
dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
return;
}
bp = netdev_priv(dev);
/* Delete storage MAC address */
if (!NO_FCOE(bp)) {
rtnl_lock();
......@@ -12744,7 +12738,15 @@ static void bnx2x_remove_one(struct pci_dev *pdev)
bnx2x_dcbnl_update_applist(bp, true);
#endif
unregister_netdev(dev);
/* Close the interface - either directly or implicitly */
if (remove_netdev) {
unregister_netdev(dev);
} else {
rtnl_lock();
if (netif_running(dev))
bnx2x_close(dev);
rtnl_unlock();
}
/* Power on: we can't let PCI layer write to us while we are in D3 */
if (IS_PF(bp))
......@@ -12766,6 +12768,12 @@ static void bnx2x_remove_one(struct pci_dev *pdev)
if (IS_VF(bp))
bnx2x_vfpf_release(bp);
/* Assumes no further PCIe PM changes will occur */
if (system_state == SYSTEM_POWER_OFF) {
pci_wake_from_d3(pdev, bp->wol);
pci_set_power_state(pdev, PCI_D3hot);
}
if (bp->regview)
iounmap(bp->regview);
......@@ -12780,7 +12788,8 @@ static void bnx2x_remove_one(struct pci_dev *pdev)
}
bnx2x_free_mem_bp(bp);
free_netdev(dev);
if (remove_netdev)
free_netdev(dev);
if (atomic_read(&pdev->enable_cnt) == 1)
pci_release_regions(pdev);
......@@ -12789,6 +12798,20 @@ static void bnx2x_remove_one(struct pci_dev *pdev)
pci_set_drvdata(pdev, NULL);
}
static void bnx2x_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct bnx2x *bp;
if (!dev) {
dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
return;
}
bp = netdev_priv(dev);
__bnx2x_remove(pdev, dev, bp, true);
}
static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
{
bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
......@@ -12968,6 +12991,29 @@ static const struct pci_error_handlers bnx2x_err_handler = {
.resume = bnx2x_io_resume,
};
static void bnx2x_shutdown(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct bnx2x *bp;
if (!dev)
return;
bp = netdev_priv(dev);
if (!bp)
return;
rtnl_lock();
netif_device_detach(dev);
rtnl_unlock();
/* Don't remove the netdevice, as there are scenarios which will cause
* the kernel to hang, e.g., when trying to remove bnx2i while the
* rootfs is mounted from SAN.
*/
__bnx2x_remove(pdev, dev, bp, false);
}
static struct pci_driver bnx2x_pci_driver = {
.name = DRV_MODULE_NAME,
.id_table = bnx2x_pci_tbl,
......@@ -12979,6 +13025,7 @@ static struct pci_driver bnx2x_pci_driver = {
#ifdef CONFIG_BNX2X_SRIOV
.sriov_configure = bnx2x_sriov_configure,
#endif
.shutdown = bnx2x_shutdown,
};
static int __init bnx2x_init(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment