[SCSI] zfcp: Stop system after memory corruption

For each request that is sent to the FCP adapter, zfcp allocates
memory. Status information and data that is being read from the
device is written to this memory by the hardware. After that,
the hardware signals this via the response queue and zfcp
continues processing.

Now, if zfcp detects that there is a signal for an incoming
response from the hardware, but there is no outstanding request
for that request id, then some memory that can be in use anywhere
in the system has just been overwritten. This should never happen,
but if it does, stop the system with a panic.
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

drivers/s390/scsi/zfcp_qdio.c

@@ -285,8 +285,8 @@ zfcp_qdio_request_handler(struct ccw_device *ccw_device,
 /**
  * zfcp_qdio_reqid_check - checks for valid reqids or unsolicited status
  */
-static int zfcp_qdio_reqid_check(struct zfcp_adapter *adapter, 
-				 unsigned long req_id)
+static void zfcp_qdio_reqid_check(struct zfcp_adapter *adapter,
+				  unsigned long req_id)
 {
 	struct zfcp_fsf_req *fsf_req;
 	unsigned long flags;
@@ -298,9 +298,7 @@ static int zfcp_qdio_reqid_check(struct zfcp_adapter *adapter,
 
 	if (!fsf_req) {
 		spin_unlock_irqrestore(&adapter->req_list_lock, flags);
-		ZFCP_LOG_NORMAL("error: unknown request id (%ld).\n", req_id);
-		zfcp_erp_adapter_reopen(adapter, 0);
-		return -EINVAL;
+		panic("error: unknown request id (%ld).\n", req_id);
 	}
 
 	zfcp_reqlist_remove(adapter, req_id);
@@ -309,8 +307,6 @@ static int zfcp_qdio_reqid_check(struct zfcp_adapter *adapter,
 
 	/* finish the FSF request */
 	zfcp_fsf_req_complete(fsf_req);
-
-	return 0;
 }
 
 /*
@@ -374,27 +370,9 @@ zfcp_qdio_response_handler(struct ccw_device *ccw_device,
 
 			/* look for QDIO request identifiers in SB */
 			buffere = &buffer->element[buffere_index];
-			retval = zfcp_qdio_reqid_check(adapter,
-					(unsigned long) buffere->addr);
-
-			if (retval) {
-				ZFCP_LOG_NORMAL("bug: unexpected inbound "
-						"packet on adapter %s "
-						"(reqid=0x%lx, "
-						"first_element=%d, "
-						"elements_processed=%d)\n",
-						zfcp_get_busid_by_adapter(adapter),
-						(unsigned long) buffere->addr,
-						first_element,
-						elements_processed);
-				ZFCP_LOG_NORMAL("hex dump of inbound buffer "
-						"at address %p "
-						"(buffer_index=%d, "
-						"buffere_index=%d)\n", buffer,
-						buffer_index, buffere_index);
-				ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL,
-					      (char *) buffer, SBAL_SIZE);
-			}
+			zfcp_qdio_reqid_check(adapter,
+					      (unsigned long) buffere->addr);
+
 			/*
 			 * A single used SBALE per inbound SBALE has been
 			 * implemented by QDIO so far. Hope they will