Commit b0b33846 authored by Ville Syrjälä's avatar Ville Syrjälä Committed by Daniel Vetter

drm/i915: Trick CL2 into life on CHV when using pipe B with port B

Normmally the common lane in a PHY channel gets powered up when some
of the data lanes get powered up. But when we're driving port B with
pipe B we don't want to enabled any of the data lanes, and just want
the DPLL in the common lane to be active.

To make that happens we have to temporarily enable some data lanes
after which we can access the DPLL registers in the common lane. Once
the pipe is up and running we can drop the power override on the data
lanes allowing them to shut down. From this point forward the common
lane will in fact stay powered on until the data lanes in the other
channel get powered down.

Ville's extended explanation from the review thread:

On Wed, Aug 19, 2015 at 07:47:41AM +0530, Deepak wrote:
> One Q, why only for port B? Port C is also in same common lane right?

Port B is in the first PHY channel which also houses CL1. CL1 always
powers up whenever any lanes in either PHY channel are powered up.
CL2 only powers up if lanes in the second channel (ie. the one with
port C) powers up.

So in this scenario (pipe B->port B) we want the DPLL from CL2, but
ideally we only want to power up the lanes for port B. Powering up
port B lanes will only power up CL1, but as we need CL2 instead we
need to, temporarily, power up some lanes in port C as well.

Crossing the streams the other way (pipe A->port C) is not a problem
since CL1 powers up whenever anything else powers up. So powering up
some port C lanes is enough on its own to make the CL1 DPLL
operational, even though CL1 and the lanes live in separate channels.
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: default avatarDeepak S <deepak.s@linux.intel.com>
[danvet: Amend commit message with extended explanation.]
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent e0fce78f
...@@ -2902,6 +2902,12 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder) ...@@ -2902,6 +2902,12 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)
mutex_unlock(&dev_priv->sb_lock); mutex_unlock(&dev_priv->sb_lock);
intel_enable_dp(encoder); intel_enable_dp(encoder);
/* Second common lane will stay alive on its own now */
if (dport->release_cl2_override) {
chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, false);
dport->release_cl2_override = false;
}
} }
static void chv_dp_pre_pll_enable(struct intel_encoder *encoder) static void chv_dp_pre_pll_enable(struct intel_encoder *encoder)
...@@ -2919,6 +2925,14 @@ static void chv_dp_pre_pll_enable(struct intel_encoder *encoder) ...@@ -2919,6 +2925,14 @@ static void chv_dp_pre_pll_enable(struct intel_encoder *encoder)
intel_dp_prepare(encoder); intel_dp_prepare(encoder);
/*
* Must trick the second common lane into life.
* Otherwise we can't even access the PLL.
*/
if (ch == DPIO_CH0 && pipe == PIPE_B)
dport->release_cl2_override =
!chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, true);
chv_phy_powergate_lanes(encoder, true, lane_mask); chv_phy_powergate_lanes(encoder, true, lane_mask);
mutex_lock(&dev_priv->sb_lock); mutex_lock(&dev_priv->sb_lock);
...@@ -2997,6 +3011,15 @@ static void chv_dp_post_pll_disable(struct intel_encoder *encoder) ...@@ -2997,6 +3011,15 @@ static void chv_dp_post_pll_disable(struct intel_encoder *encoder)
mutex_unlock(&dev_priv->sb_lock); mutex_unlock(&dev_priv->sb_lock);
/*
* Leave the power down bit cleared for at least one
* lane so that chv_powergate_phy_ch() will power
* on something when the channel is otherwise unused.
* When the port is off and the override is removed
* the lanes power down anyway, so otherwise it doesn't
* really matter what the state of power down bits is
* after this.
*/
chv_phy_powergate_lanes(encoder, false, 0x0); chv_phy_powergate_lanes(encoder, false, 0x0);
} }
......
...@@ -779,6 +779,7 @@ struct intel_digital_port { ...@@ -779,6 +779,7 @@ struct intel_digital_port {
struct intel_dp dp; struct intel_dp dp;
struct intel_hdmi hdmi; struct intel_hdmi hdmi;
enum irqreturn (*hpd_pulse)(struct intel_digital_port *, bool); enum irqreturn (*hpd_pulse)(struct intel_digital_port *, bool);
bool release_cl2_override;
}; };
struct intel_dp_mst_encoder { struct intel_dp_mst_encoder {
...@@ -1363,6 +1364,8 @@ void intel_display_set_init_power(struct drm_i915_private *dev, bool enable); ...@@ -1363,6 +1364,8 @@ void intel_display_set_init_power(struct drm_i915_private *dev, bool enable);
void chv_phy_powergate_lanes(struct intel_encoder *encoder, void chv_phy_powergate_lanes(struct intel_encoder *encoder,
bool override, unsigned int mask); bool override, unsigned int mask);
bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
enum dpio_channel ch, bool override);
/* intel_pm.c */ /* intel_pm.c */
......
...@@ -1628,6 +1628,14 @@ static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder) ...@@ -1628,6 +1628,14 @@ static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
intel_hdmi_prepare(encoder); intel_hdmi_prepare(encoder);
/*
* Must trick the second common lane into life.
* Otherwise we can't even access the PLL.
*/
if (ch == DPIO_CH0 && pipe == PIPE_B)
dport->release_cl2_override =
!chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, true);
chv_phy_powergate_lanes(encoder, true, 0x0); chv_phy_powergate_lanes(encoder, true, 0x0);
mutex_lock(&dev_priv->sb_lock); mutex_lock(&dev_priv->sb_lock);
...@@ -1704,6 +1712,15 @@ static void chv_hdmi_post_pll_disable(struct intel_encoder *encoder) ...@@ -1704,6 +1712,15 @@ static void chv_hdmi_post_pll_disable(struct intel_encoder *encoder)
mutex_unlock(&dev_priv->sb_lock); mutex_unlock(&dev_priv->sb_lock);
/*
* Leave the power down bit cleared for at least one
* lane so that chv_powergate_phy_ch() will power
* on something when the channel is otherwise unused.
* When the port is off and the override is removed
* the lanes power down anyway, so otherwise it doesn't
* really matter what the state of power down bits is
* after this.
*/
chv_phy_powergate_lanes(encoder, false, 0x0); chv_phy_powergate_lanes(encoder, false, 0x0);
} }
...@@ -1925,6 +1942,12 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder) ...@@ -1925,6 +1942,12 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
g4x_enable_hdmi(encoder); g4x_enable_hdmi(encoder);
vlv_wait_port_ready(dev_priv, dport, 0x0); vlv_wait_port_ready(dev_priv, dport, 0x0);
/* Second common lane will stay alive on its own now */
if (dport->release_cl2_override) {
chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, false);
dport->release_cl2_override = false;
}
} }
static void intel_hdmi_destroy(struct drm_connector *connector) static void intel_hdmi_destroy(struct drm_connector *connector)
......
...@@ -1032,6 +1032,35 @@ static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, ...@@ -1032,6 +1032,35 @@ static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
phy, dev_priv->chv_phy_control); phy, dev_priv->chv_phy_control);
} }
bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
enum dpio_channel ch, bool override)
{
struct i915_power_domains *power_domains = &dev_priv->power_domains;
bool was_override;
mutex_lock(&power_domains->lock);
was_override = dev_priv->chv_phy_control & PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
if (override == was_override)
goto out;
if (override)
dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
else
dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control);
DRM_DEBUG_KMS("Power gating DPIO PHY%d CH%d (DPIO_PHY_CONTROL=0x%08x)\n",
phy, ch, dev_priv->chv_phy_control);
out:
mutex_unlock(&power_domains->lock);
return was_override;
}
void chv_phy_powergate_lanes(struct intel_encoder *encoder, void chv_phy_powergate_lanes(struct intel_encoder *encoder,
bool override, unsigned int mask) bool override, unsigned int mask)
{ {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment