ASoC: rt5645: Update dapm pins when the card is not instantiated yet

This makes sure the dapm state is consistent when the card is
instantiated.

However, if the card is not instantiated yet, we still update the
registers manually in the "jack in" case, so that we can immediately
report if a mic is present or not.

Disabling "Mic Det Power" after detection, and on jack out, can
wait until the card gets instantiated.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/rt5645.c

@@ -2805,12 +2805,11 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert)
 	if (jack_insert) {
 		regmap_write(rt5645->regmap, RT5645_CHARGE_PUMP, 0x0006);
 
-		if (codec->component.card->instantiated) {
-			/* for jack type detect */
-			snd_soc_dapm_force_enable_pin(dapm, "LDO2");
-			snd_soc_dapm_force_enable_pin(dapm, "Mic Det Power");
-			snd_soc_dapm_sync(dapm);
-		} else {
+		/* for jack type detect */
+		snd_soc_dapm_force_enable_pin(dapm, "LDO2");
+		snd_soc_dapm_force_enable_pin(dapm, "Mic Det Power");
+		snd_soc_dapm_sync(dapm);
+		if (!dapm->card->instantiated) {
 			/* Power up necessary bits for JD if dapm is
 			   not ready yet */
 			regmap_update_bits(rt5645->regmap, RT5645_PWR_ANLG1,
@@ -2841,12 +2840,8 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert)
 				rt5645_enable_push_button_irq(codec, true);
 			}
 		} else {
-			if (codec->component.card->instantiated) {
-				snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
-				snd_soc_dapm_sync(dapm);
-			} else
-				regmap_update_bits(rt5645->regmap,
-					RT5645_PWR_VOL, RT5645_PWR_MIC_DET, 0);
+			snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
+			snd_soc_dapm_sync(dapm);
 			rt5645->jack_type = SND_JACK_HEADPHONE;
 		}
 
@@ -2855,19 +2850,10 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert)
 		if (rt5645->en_button_func)
 			rt5645_enable_push_button_irq(codec, false);
 		else {
-			if (codec->component.card->instantiated) {
-				if (rt5645->pdata.jd_mode == 0)
-					snd_soc_dapm_disable_pin(dapm, "LDO2");
-				snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
-				snd_soc_dapm_sync(dapm);
-			} else {
-				if (rt5645->pdata.jd_mode == 0)
-					regmap_update_bits(rt5645->regmap,
-						RT5645_PWR_MIXER,
-						RT5645_PWR_LDO2, 0);
-				regmap_update_bits(rt5645->regmap,
-					RT5645_PWR_VOL, RT5645_PWR_MIC_DET, 0);
-			}
+			if (rt5645->pdata.jd_mode == 0)
+				snd_soc_dapm_disable_pin(dapm, "LDO2");
+			snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
+			snd_soc_dapm_sync(dapm);
 		}
 	}