This removes the files orphaned by the earlier PC9800 removal

arch/i386/boot98/Makefile

-#
-# arch/i386/boot/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-#
-
-# ROOT_DEV specifies the default root-device when making the image.
-# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
-# the default of FLOPPY is used by 'build'.
-
-ROOT_DEV := CURRENT
-
-# If you want to preset the SVGA mode, uncomment the next line and
-# set SVGA_MODE to whatever number you want.
-# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
-# The number is the same as you would ordinarily press at bootup.
-
-SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
-
-# If you want the RAM disk device, define this to be the size in blocks.
-
-#RAMDISK := -DRAMDISK=512
-
-targets		:= vmlinux.bin bootsect bootsect.o setup setup.o \
-		   zImage bzImage
-subdir- 	:= compressed
-
-host-progs	:= tools/build
-
-# ---------------------------------------------------------------------------
-
-$(obj)/zImage:  IMAGE_OFFSET := 0x1000
-$(obj)/zImage:  EXTRA_AFLAGS := -traditional $(SVGA_MODE) $(RAMDISK)
-$(obj)/bzImage: IMAGE_OFFSET := 0x100000
-$(obj)/bzImage: EXTRA_AFLAGS := -traditional $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
-$(obj)/bzImage: BUILDFLAGS   := -b
-
-quiet_cmd_image = BUILD   $@
-cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \
-	    $(obj)/vmlinux.bin $(ROOT_DEV) > $@
-
-$(obj)/zImage $(obj)/bzImage: $(obj)/bootsect $(obj)/setup \
-			      $(obj)/vmlinux.bin $(obj)/tools/build FORCE
-	$(call if_changed,image)
-	@echo 'Kernel: $@ is ready'
-
-$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
-	$(call if_changed,objcopy)
-
-LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
-LDFLAGS_setup	 := -Ttext 0x0 -s --oformat binary -e begtext
-
-$(obj)/setup $(obj)/bootsect: %: %.o FORCE
-	$(call if_changed,ld)
-
-$(obj)/compressed/vmlinux: FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
-
-# Set this if you want to pass append arguments to the zdisk/fdimage kernel
-FDARGS = 
-
-$(obj)/mtools.conf: $(src)/mtools.conf.in
-	sed -e 's|@OBJ@|$(obj)|g' < $< > $@
-
-# This requires write access to /dev/fd0
-zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
-	MTOOLSRC=$(obj)/mtools.conf mformat a:			; sync
-	syslinux /dev/fd0					; sync
-	echo 'default linux $(FDARGS)' | \
-		MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg
-	MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux	; sync
-
-# These require being root or having syslinux 2.02 or higher installed
-fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
-	dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
-	MTOOLSRC=$(obj)/mtools.conf mformat v:			; sync
-	syslinux $(obj)/fdimage					; sync
-	echo 'default linux $(FDARGS)' | \
-		MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
-	MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux	; sync
-
-fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
-	dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
-	MTOOLSRC=$(obj)/mtools.conf mformat w:			; sync
-	syslinux $(obj)/fdimage					; sync
-	echo 'default linux $(FDARGS)' | \
-		MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
-	MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux	; sync
-
-zlilo: $(BOOTIMAGE)
-	if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
-	if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
-	cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
-	cp System.map $(INSTALL_PATH)/
-	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
-
-install: $(BOOTIMAGE)
-	sh $(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"

arch/i386/boot98/install.sh

-#!/bin/sh
-#
-# arch/i386/boot/install.sh
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1995 by Linus Torvalds
-#
-# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
-#
-# "make install" script for i386 architecture
-#
-# Arguments:
-#   $1 - kernel version
-#   $2 - kernel image file
-#   $3 - kernel map file
-#   $4 - default install path (blank if root directory)
-#
-
-# User may have a custom install script
-
-if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
-if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
-
-# Default install - same as make zlilo
-
-if [ -f $4/vmlinuz ]; then
-	mv $4/vmlinuz $4/vmlinuz.old
-fi
-
-if [ -f $4/System.map ]; then
-	mv $4/System.map $4/System.old
-fi
-
-cat $2 > $4/vmlinuz
-cp $3 $4/System.map
-
-if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi

arch/i386/boot98/mtools.conf.in

-#
-# mtools configuration file for "make (b)zdisk"
-#
-
-# Actual floppy drive
-drive a:
-  file="/dev/fd0"
-
-# 1.44 MB floppy disk image
-drive v:
-  file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=18 filter
-
-# 2.88 MB floppy disk image (mostly for virtual uses)
-drive w:
-  file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter
-
-

arch/i386/boot98/video.S

-/*	video.S
- *
- *  Video mode setup, etc. for NEC PC-9800 series.
- *
- *  Copyright (C) 1997,98,99  Linux/98 project  <seraphim@kmc.kyoto-u.ac.jp>
- *
- *  Based on the video.S for IBM PC:
- *	copyright (C) Martin Mares <mj@atrey.karlin.mff.cuni.cz>
- */
-
-/* Positions of various video parameters passed to the kernel */
-/* (see also include/linux/tty.h) */
-#define PARAM_CURSOR_POS	0x00
-#define PARAM_VIDEO_PAGE	0x04
-#define PARAM_VIDEO_MODE	0x06
-#define PARAM_VIDEO_COLS	0x07
-#define PARAM_VIDEO_EGA_BX	0x0a
-#define PARAM_VIDEO_LINES	0x0e
-#define PARAM_HAVE_VGA		0x0f
-#define PARAM_FONT_POINTS	0x10
-
-#define PARAM_VIDEO98_COMPAT	0x0a
-#define PARAM_VIDEO98_HIRESO	0x0b
-#define PARAM_VIDEO98_MACHTYPE	0x0c
-#define PARAM_VIDEO98_LINES	0x0e
-#define PARAM_VIDEO98_COLS	0x0f
-
-# PARAM_LFB_* and PARAM_VESAPM_* are unused on PC-9800.
-
-# This is the main entry point called by setup.S
-# %ds *must* be pointing to the bootsector
-video:	xorw	%ax, %ax
-	movw	%ax, %es			# %es = 0
-
-	movb	%es:BIOS_FLAG, %al
-	movb	%al, PARAM_VIDEO_MODE
-
-	movb	$0, PARAM_VIDEO98_HIRESO	# 0 = normal
-	movw	$NORMAL_TEXT, PARAM_VIDEO_PAGE
-	testb	$0x8, %al
-	movw	$(80 * 256 + 25), %ax
-	jz	1f
-	# hireso machine.
-	movb	$1, PARAM_VIDEO98_HIRESO	# !0 = hi-reso
-	movb	$(HIRESO_TEXT >> 8), PARAM_VIDEO_PAGE + 1
-	movw	$(80 * 256 + 31), %ax
-1:	movw	%ax, PARAM_VIDEO98_LINES	# also sets VIDEO98_COLS
-
-	movb	$0xc0, %ch			# 400-line graphic mode
-	movb	$0x42, %ah
-	int	$0x18
-
-	movw	$80, PARAM_VIDEO_COLS
-
-	movw	$msg_probing, %si
-	call	prtstr_cs
-
-# Check vendor from font pattern of `A'...
-
-1:	inb	$0x60, %al			# wait V-sync
-	testb	$0x20, %al
-	jnz	1b
-2:	inb	$0x60, %al
-	testb	$0x20, %al
-	jz	2b
-
-	movb	$0x00, %al			# select font of `A'
-	outb	%al, $0xa1
-	movb	$0x41, %al
-	outb	%al, $0xa3
-
-	movw	$8, %cx
-	movw	PARAM_VIDEO_PAGE, %ax
-	cmpw	$NORMAL_TEXT, %ax
-	je	3f
-	movb	$24, %cl			# for hi-reso machine
-3:	addw	$0x400, %ax			# %ax = CG window segment
-	pushw	%ds
-	movw	%ax, %ds
-	xorw	%dx, %dx			# get sum of `A' pattern...
-	xorw	%si, %si
-4:	lodsw
-	addw	%ax, %dx
-	loop	4b
-	popw	%ds
-
-	movw	%dx, %ax
-	movw	$msg_nec, %si
-	xorw	%bx, %bx			# vendor info will go into %bx
-	testb	$8, %es:BIOS_FLAG
-	jnz	check_hireso_vendor
-	cmpw	$0xc7f8, %ax
-	je	5f
-	jmp	6f
-check_hireso_vendor:
-	cmpw	$0x9639, %ax			# XXX: NOT VERIFIED!!!
-	je	5f
-6:	incw	%bx				# compatible machine
-	movw	$msg_compat, %si
-5:	movb	%bl, PARAM_VIDEO98_COMPAT
-	call	prtstr_cs
-
-	movw	$msg_fontdata, %si
-	call	prtstr_cs			# " (CG sum of A = 0x"
-	movw	%dx, %ax
-	call	prthex
-	call	prtstr_cs			# ") PC-98"
-
-	movb	$'0', %al
-	pushw	%ds
-	pushw	$0xf8e8
-	popw	%ds
-	cmpw	$0x2198, (0)
-	popw	%ds
-	jne	7f
-	movb	$'2', %al
-7:	call	prtchr
-	call	prtstr_cs			# "1 "
-
-	movb	$0, PARAM_VIDEO98_MACHTYPE
-#if 0	/* XXX - This check is bogus? [0000:BIOS_FLAG2]-bit7 does NOT
-		 indicate whether it is a note machine, but merely indicates
-		 whether it has ``RAM drive''. */
-# check note machine
-	testb	$0x80, %es:BIOS_FLAG2
-	jnz	is_note
-	pushw	%ds
-	pushw	$0xfd80
-	popw	%ds
-	movb	(4), %al
-	popw	%ds
-	cmpb	$0x20, %al			# EPSON note A
-	je	epson_note
-	cmpb	$0x22, %al			# EPSON note W
-	je	epson_note
-	cmpb	$0x27, %al			# EPSON note AE
-	je	epson_note
-	cmpb	$0x2a, %al			# EPSON note WR
-	jne	note_done
-epson_note:
-	movb	$1, PARAM_VIDEO98_MACHTYPE
-	movw	$msg_note, %si
-	call	prtstr_cs
-note_done:
-#endif
-	
-# print h98 ? (only NEC)
-	cmpb	$0, PARAM_VIDEO98_COMPAT
-	jnz	8f				# not NEC -> not H98
-
-	testb	$0x80, %es:BIOS_FLAG5
-	jz	8f				# have NESA bus -> H98
-	movw	$msg_h98, %si
-	call	prtstr_cs
-	orb	$2, PARAM_VIDEO98_MACHTYPE
-8:	testb	$0x40, %es:BIOS_FLAG5
-	jz	9f
-	movw	$msg_gs, %si
-	call	prtstr_cs			# only prints it :-)
-9:
-	movw	$msg_normal, %si		# "normal"
-	testb	$0x8, %es:BIOS_FLAG
-	jz	1f
-	movw	$msg_hireso, %si
-1:	call	prtstr_cs
-
-	movw	$msg_sysclk, %si
-	call	prtstr_cs
-	movb	$'5', %al
-	testb	$0x80, %es:BIOS_FLAG
-	jz	2f
-	movb	$'8', %al
-2:	call	prtchr
-	call	prtstr_cs
-
-#if 0
-	testb	$0x40, %es:(0x45c)
-	jz	no_30line			# no 30-line support
-
-	movb	%es:KB_SHFT_STS, %al
-	testb	$0x01, %al			# is SHIFT key pressed?
-	jz	no_30line
-
-	testb	$0x10, %al			# is CTRL key pressed?
-	jnz	line40
-
-	# switch to 30-line mode
-	movb	$30, PARAM_VIDEO98_LINES
-	movw	$msg_30line, %si
-	jmp	3f
-
-line40:
-	movb	$37, PARAM_VIDEO98_LINES
-	movw	$40, PARAM_VIDEO_LINES
-	movw	$msg_40line, %si
-3:	call	prtstr_cs
-
-	movb	$0x32, %bh
-	movw	$0x300c, %ax
-	int	$0x18				# switch video mode
-	movb	$0x0c, %ah
-	int	$0x18				# turn on text plane
-	movw	%cs:cursor_address, %dx
-	movb	$0x13, %ah
-	int	$0x18				# move cursor to correct place
-	mov	$0x11, %ah
-	int	$0x18				# turn on text plane
-
-	call	prtstr_cs			# "Ok.\r\n"
-no_30line:
-#endif
-	ret
-
-prtstr_cs:
-	pushw	%ds
-	pushw	%cs
-	popw	%ds
-	call	prtstr
-	popw	%ds
-	ret
-
-# prthex is for debugging purposes, and prints %ax in hexadecimal.
-prthex:	pushw	%cx
-	movw	$4, %cx
-1:	rolw	$4, %ax
-	pushw	%ax
-	andb	$0xf, %al
-	cmpb	$10, %al
-	sbbb	$0x69, %al
-	das
-	call	prtchr
-	popw	%ax
-	loop	1b
-	popw	%cx
-	ret
-
-msg_probing:	.string	"Probing machine: "
-
-msg_nec:	.string	"NEC"
-msg_compat:	.string	"compatible"
-
-msg_fontdata:	.string	" (CG sum of A = 0x"
-		.string	") PC-98"
-		.string	"1 "
-
-msg_gs:		.string	"(GS) "
-msg_h98:	.string	"(H98) "
-
-msg_normal:	.string	"normal"
-msg_hireso:	.string	"Hi-reso"
-
-msg_sysclk:	.string	" mode, system clock "
-		.string	"MHz\r\n"
-
-#if 0
-msg_40line:	# cpp will concat following lines, so the assembler can deal.
-		.ascii	"\
-Video mode will be adjusted to 37-line (so-called ``40-line'') mode later.\r\n\
-THIS MODE MAY DAMAGE YOUR MONITOR PHYSICALLY. USE AT YOUR OWN RISK.\r\n"
-msg_30line:	.string	"Switching video mode to 30-line (640x480) mode... "
-		.string	"Ok.\r\n"
-#endif

arch/i386/mach-pc9800/Makefile

-#
-# Makefile for the linux kernel.
-#
-
-obj-y				:= setup.o topology.o std_resources.o

arch/i386/mach-pc9800/setup.c

-/*
- *	Machine specific setup for pc9800
- */
-
-#include <linux/config.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/apm_bios.h>
-#include <asm/setup.h>
-#include <asm/arch_hooks.h>
-
-struct sys_desc_table_struct {
-	unsigned short length;
-	unsigned char table[0];
-};
-
-/**
- * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
- *
- * Description:
- *	Perform any necessary interrupt initialisation prior to setting up
- *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
- *	interrupts should be initialised here if the machine emulates a PC
- *	in any way.
- **/
-void __init pre_intr_init_hook(void)
-{
-	init_ISA_irqs();
-}
-
-/*
- * IRQ7 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq7 = { no_action, 0, 0, "cascade", NULL, NULL};
-
-/**
- * intr_init_hook - post gate setup interrupt initialisation
- *
- * Description:
- *	Fill in any interrupts that may have been left out by the general
- *	init_IRQ() routine.  interrupts having to do with the machine rather
- *	than the devices on the I/O bus (like APIC interrupts in intel MP
- *	systems) are started here.
- **/
-void __init intr_init_hook(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
-	apic_intr_init();
-#endif
-
-	setup_irq(7, &irq7);
-}
-
-/**
- * pre_setup_arch_hook - hook called prior to any setup_arch() execution
- *
- * Description:
- *	generally used to activate any machine specific identification
- *	routines that may be needed before setup_arch() runs.  On VISWS
- *	this is used to get the board revision and type.
- **/
-void __init pre_setup_arch_hook(void)
-{
-	SYS_DESC_TABLE.length = 0;
-	MCA_bus = 0;
-	/* In PC-9800, APM BIOS version is written in BCD...?? */
-	APM_BIOS_INFO.version = (APM_BIOS_INFO.version & 0xff00)
-				| ((APM_BIOS_INFO.version & 0x00f0) >> 4);
-}
-
-/**
- * trap_init_hook - initialise system specific traps
- *
- * Description:
- *	Called as the final act of trap_init().  Used in VISWS to initialise
- *	the various board specific APIC traps.
- **/
-void __init trap_init_hook(void)
-{
-}
-
-static struct irqaction irq0  = { timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL};
-
-/**
- * time_init_hook - do any specific initialisations for the system timer.
- *
- * Description:
- *	Must plug the system timer interrupt source at HZ into the IRQ listed
- *	in irq_vectors.h:TIMER_IRQ
- **/
-void __init time_init_hook(void)
-{
-	setup_irq(0, &irq0);
-}
-
-#ifdef CONFIG_MCA
-/**
- * mca_nmi_hook - hook into MCA specific NMI chain
- *
- * Description:
- *	The MCA (Microchannel Architecture) has an NMI chain for NMI sources
- *	along the MCA bus.  Use this to hook into that chain if you will need
- *	it.
- **/
-void __init mca_nmi_hook(void)
-{
-	/* If I recall correctly, there's a whole bunch of other things that
-	 * we can do to check for NMI problems, but that's all I know about
-	 * at the moment.
-	 */
-
-	printk("NMI generated from unknown source!\n");
-}
-#endif

arch/i386/mach-pc9800/std_resources.c

-/*
- *  Machine specific resource allocation for PC-9800.
- *  Written by Osamu Tomita <tomita@cinet.co.jp>
- */
-
-#include <linux/ioport.h>
-#include <asm/io.h>
-#include <asm/std_resources.h>
-
-static char str_pic1[] = "pic1";
-static char str_dma[] = "dma";
-static char str_pic2[] = "pic2";
-static char str_calender_clock[] = "calender clock";
-static char str_system[] = "system";
-static char str_nmi_control[] = "nmi control";
-static char str_kanji_rom[] = "kanji rom";
-static char str_keyboard[] = "keyboard";
-static char str_text_gdc[] = "text gdc";
-static char str_crtc[] = "crtc";
-static char str_timer[] = "timer";
-static char str_graphic_gdc[] = "graphic gdc";
-static char str_dma_ex_bank[] = "dma ex. bank";
-static char str_beep_freq[] = "beep freq.";
-static char str_mouse_pio[] = "mouse pio";
-struct resource standard_io_resources[] = {
-	{ str_pic1, 0x00, 0x00, IORESOURCE_BUSY },
-	{ str_dma, 0x01, 0x01, IORESOURCE_BUSY },
-	{ str_pic1, 0x02, 0x02, IORESOURCE_BUSY },
-	{ str_dma, 0x03, 0x03, IORESOURCE_BUSY },
-	{ str_dma, 0x05, 0x05, IORESOURCE_BUSY },
-	{ str_dma, 0x07, 0x07, IORESOURCE_BUSY },
-	{ str_pic2, 0x08, 0x08, IORESOURCE_BUSY },
-	{ str_dma, 0x09, 0x09, IORESOURCE_BUSY },
-	{ str_pic2, 0x0a, 0x0a, IORESOURCE_BUSY },
-	{ str_dma, 0x0b, 0x0b, IORESOURCE_BUSY },
-	{ str_dma, 0x0d, 0x0d, IORESOURCE_BUSY },
-	{ str_dma, 0x0f, 0x0f, IORESOURCE_BUSY },
-	{ str_dma, 0x11, 0x11, IORESOURCE_BUSY },
-	{ str_dma, 0x13, 0x13, IORESOURCE_BUSY },
-	{ str_dma, 0x15, 0x15, IORESOURCE_BUSY },
-	{ str_dma, 0x17, 0x17, IORESOURCE_BUSY },
-	{ str_dma, 0x19, 0x19, IORESOURCE_BUSY },
-	{ str_dma, 0x1b, 0x1b, IORESOURCE_BUSY },
-	{ str_dma, 0x1d, 0x1d, IORESOURCE_BUSY },
-	{ str_dma, 0x1f, 0x1f, IORESOURCE_BUSY },
-	{ str_calender_clock, 0x20, 0x20, 0 },
-	{ str_dma, 0x21, 0x21, IORESOURCE_BUSY },
-	{ str_calender_clock, 0x22, 0x22, 0 },
-	{ str_dma, 0x23, 0x23, IORESOURCE_BUSY },
-	{ str_dma, 0x25, 0x25, IORESOURCE_BUSY },
-	{ str_dma, 0x27, 0x27, IORESOURCE_BUSY },
-	{ str_dma, 0x29, 0x29, IORESOURCE_BUSY },
-	{ str_dma, 0x2b, 0x2b, IORESOURCE_BUSY },
-	{ str_dma, 0x2d, 0x2d, IORESOURCE_BUSY },
-	{ str_system, 0x31, 0x31, IORESOURCE_BUSY },
-	{ str_system, 0x33, 0x33, IORESOURCE_BUSY },
-	{ str_system, 0x35, 0x35, IORESOURCE_BUSY },
-	{ str_system, 0x37, 0x37, IORESOURCE_BUSY },
-	{ str_nmi_control, 0x50, 0x50, IORESOURCE_BUSY },
-	{ str_nmi_control, 0x52, 0x52, IORESOURCE_BUSY },
-	{ "time stamp", 0x5c, 0x5f, IORESOURCE_BUSY },
-	{ str_kanji_rom, 0xa1, 0xa1, IORESOURCE_BUSY },
-	{ str_kanji_rom, 0xa3, 0xa3, IORESOURCE_BUSY },
-	{ str_kanji_rom, 0xa5, 0xa5, IORESOURCE_BUSY },
-	{ str_kanji_rom, 0xa7, 0xa7, IORESOURCE_BUSY },
-	{ str_kanji_rom, 0xa9, 0xa9, IORESOURCE_BUSY },
-	{ str_keyboard, 0x41, 0x41, IORESOURCE_BUSY },
-	{ str_keyboard, 0x43, 0x43, IORESOURCE_BUSY },
-	{ str_text_gdc, 0x60, 0x60, IORESOURCE_BUSY },
-	{ str_text_gdc, 0x62, 0x62, IORESOURCE_BUSY },
-	{ str_text_gdc, 0x64, 0x64, IORESOURCE_BUSY },
-	{ str_text_gdc, 0x66, 0x66, IORESOURCE_BUSY },
-	{ str_text_gdc, 0x68, 0x68, IORESOURCE_BUSY },
-	{ str_text_gdc, 0x6a, 0x6a, IORESOURCE_BUSY },
-	{ str_text_gdc, 0x6c, 0x6c, IORESOURCE_BUSY },
-	{ str_text_gdc, 0x6e, 0x6e, IORESOURCE_BUSY },
-	{ str_crtc, 0x70, 0x70, IORESOURCE_BUSY },
-	{ str_crtc, 0x72, 0x72, IORESOURCE_BUSY },
-	{ str_crtc, 0x74, 0x74, IORESOURCE_BUSY },
-	{ str_crtc, 0x74, 0x74, IORESOURCE_BUSY },
-	{ str_crtc, 0x76, 0x76, IORESOURCE_BUSY },
-	{ str_crtc, 0x78, 0x78, IORESOURCE_BUSY },
-	{ str_crtc, 0x7a, 0x7a, IORESOURCE_BUSY },
-	{ str_timer, 0x71, 0x71, IORESOURCE_BUSY },
-	{ str_timer, 0x73, 0x73, IORESOURCE_BUSY },
-	{ str_timer, 0x75, 0x75, IORESOURCE_BUSY },
-	{ str_timer, 0x77, 0x77, IORESOURCE_BUSY },
-	{ str_graphic_gdc, 0xa0, 0xa0, IORESOURCE_BUSY },
-	{ str_graphic_gdc, 0xa2, 0xa2, IORESOURCE_BUSY },
-	{ str_graphic_gdc, 0xa4, 0xa4, IORESOURCE_BUSY },
-	{ str_graphic_gdc, 0xa6, 0xa6, IORESOURCE_BUSY },
-	{ "cpu", 0xf0, 0xf7, IORESOURCE_BUSY },
-	{ "fpu", 0xf8, 0xff, IORESOURCE_BUSY },
-	{ str_dma_ex_bank, 0x0e05, 0x0e05, 0 },
-	{ str_dma_ex_bank, 0x0e07, 0x0e07, 0 },
-	{ str_dma_ex_bank, 0x0e09, 0x0e09, 0 },
-	{ str_dma_ex_bank, 0x0e0b, 0x0e0b, 0 },
-	{ str_beep_freq, 0x3fd9, 0x3fd9, IORESOURCE_BUSY },
-	{ str_beep_freq, 0x3fdb, 0x3fdb, IORESOURCE_BUSY },
-	{ str_beep_freq, 0x3fdd, 0x3fdd, IORESOURCE_BUSY },
-	{ str_beep_freq, 0x3fdf, 0x3fdf, IORESOURCE_BUSY },
-	/* All PC-9800 have (exactly) one mouse interface.  */
-	{ str_mouse_pio, 0x7fd9, 0x7fd9, 0 },
-	{ str_mouse_pio, 0x7fdb, 0x7fdb, 0 },
-	{ str_mouse_pio, 0x7fdd, 0x7fdd, 0 },
-	{ str_mouse_pio, 0x7fdf, 0x7fdf, 0 },
-	{ "mouse timer", 0xbfdb, 0xbfdb, 0 },
-	{ "mouse irq", 0x98d7, 0x98d7, 0 },
-};
-
-#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
-
-static struct resource tvram_resource = { "Text VRAM/CG window", 0xa0000, 0xa4fff, IORESOURCE_BUSY };
-static struct resource gvram_brg_resource = { "Graphic VRAM (B/R/G)", 0xa8000, 0xbffff, IORESOURCE_BUSY };
-static struct resource gvram_e_resource = { "Graphic VRAM (E)", 0xe0000, 0xe7fff, IORESOURCE_BUSY };
-
-/* System ROM resources */
-#define MAXROMS 6
-static struct resource rom_resources[MAXROMS] = {
-	{ "System ROM", 0xe8000, 0xfffff, IORESOURCE_BUSY }
-};
-
-void __init probe_roms(void)
-{
-	int i;
-	__u8 *xrom_id;
-	int roms = 1;
-
-	request_resource(&iomem_resource, rom_resources+0);
-
-	xrom_id = (__u8 *) isa_bus_to_virt(PC9800SCA_XROM_ID + 0x10);
-
-	for (i = 0; i < 16; i++) {
-		if (xrom_id[i] & 0x80) {
-			int j;
-
-			for (j = i + 1; j < 16 && (xrom_id[j] & 0x80); j++)
-				;
-			rom_resources[roms].start = 0x0d0000 + i * 0x001000;
-			rom_resources[roms].end = 0x0d0000 + j * 0x001000 - 1;
-			rom_resources[roms].name = "Extension ROM";
-			rom_resources[roms].flags = IORESOURCE_BUSY;
-
-			request_resource(&iomem_resource,
-					  rom_resources + roms);
-			if (++roms >= MAXROMS)
-				return;
-		}
-	}
-}
-
-void __init request_graphics_resource(void)
-{
-	int i;
-
-	if (PC9800_HIGHRESO_P()) {
-		tvram_resource.start = 0xe0000;
-		tvram_resource.end   = 0xe4fff;
-		gvram_brg_resource.name  = "Graphic VRAM";
-		gvram_brg_resource.start = 0xc0000;
-		gvram_brg_resource.end   = 0xdffff;
-	}
-
-	request_resource(&iomem_resource, &tvram_resource);
-	request_resource(&iomem_resource, &gvram_brg_resource);
-	if (!PC9800_HIGHRESO_P())
-		request_resource(&iomem_resource, &gvram_e_resource);
-
-	if (PC9800_HIGHRESO_P() || PC9800_9821_P()) {
-		static char graphics[] = "graphics";
-		static struct resource graphics_resources[] = {
-			{ graphics, 0x9a0, 0x9a0, 0 },
-			{ graphics, 0x9a2, 0x9a2, 0 },
-			{ graphics, 0x9a4, 0x9a4, 0 },
-			{ graphics, 0x9a6, 0x9a6, 0 },
-			{ graphics, 0x9a8, 0x9a8, 0 },
-			{ graphics, 0x9aa, 0x9aa, 0 },
-			{ graphics, 0x9ac, 0x9ac, 0 },
-			{ graphics, 0x9ae, 0x9ae, 0 },
-		};
-
-#define GRAPHICS_RESOURCES (sizeof(graphics_resources)/sizeof(struct resource))
-
-		for (i = 0; i < GRAPHICS_RESOURCES; i++)
-			request_resource(&ioport_resource, graphics_resources + i);
-	}
-}
-
-void __init request_standard_io_resources(void)
-{
-	int i;
-
-	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
-		request_resource(&ioport_resource, standard_io_resources+i);
-}

arch/i386/mach-pc9800/topology.c

-/*
- * arch/i386/mach-pc9800/topology.c - Populate driverfs with topology information
- *
- * Written by: Matthew Dobson, IBM Corporation
- * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.          
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modify for PC-9800 by Osamu Tomita <tomita@cinet.co.jp>
- *
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/cpu.h>
-
-struct i386_cpu cpu_devices[NR_CPUS];
-
-static int __init topology_init(void)
-{
-	int i;
-
-	for (i = 0; i < NR_CPUS; i++)
-		if (cpu_possible(i)) arch_register_cpu(i);
-	return 0;
-}
-
-subsys_initcall(topology_init);

drivers/ide/legacy/pc9800.c

-/*
- *  ide_pc9800.c
- *
- *  Copyright (C) 1997-2000  Linux/98 project,
- *			     Kyoto University Microcomputer Club.
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pc9800.h>
-
-#define PC9800_IDE_BANKSELECT	0x432
-
-#undef PC9800_IDE_DEBUG
-
-static void pc9800_select(ide_drive_t *drive)
-{
-#ifdef PC9800_IDE_DEBUG
-	byte old;
-
-	/* Too noisy: */
-	/* printk(KERN_DEBUG "pc9800_select(%s)\n", drive->name); */
-
-	outb(0x80, PC9800_IDE_BANKSELECT);
-	old = inb(PC9800_IDE_BANKSELECT);
-	if (old != HWIF(drive)->index)
-		printk(KERN_DEBUG "ide-pc9800: switching bank #%d -> #%d\n",
-			old, HWIF(drive)->index);
-#endif
-	outb(HWIF(drive)->index, PC9800_IDE_BANKSELECT);
-}
-
-void __init ide_probe_for_pc9800(void)
-{
-	u8 saved_bank;
-
-	if (!PC9800_9821_P() /* || !PC9821_IDEIF_DOUBLE_P() */)
-		return;
-
-	if (!request_region(PC9800_IDE_BANKSELECT, 1, "ide0/1 bank")) {
-		printk(KERN_ERR
-			"ide: bank select port (%#x) is already occupied!\n",
-			PC9800_IDE_BANKSELECT);
-		return;
-	}
-
-	/* Do actual probing. */
-	if ((saved_bank = inb(PC9800_IDE_BANKSELECT)) == (u8) ~0
-	    || (outb(saved_bank ^ 1, PC9800_IDE_BANKSELECT),
-		/* Next outb is dummy for reading status. */
-		outb(0x80, PC9800_IDE_BANKSELECT),
-		inb(PC9800_IDE_BANKSELECT) != (saved_bank ^ 1))) {
-		printk(KERN_INFO
-			"ide: pc9800 type bank selecting port not found\n");
-		release_region(PC9800_IDE_BANKSELECT, 1);
-		return;
-	}
-
-	/* Restore original value, just in case. */
-	outb(saved_bank, PC9800_IDE_BANKSELECT);
-
-	/* These ports are reseved by IDE I/F.  */
-	if (!request_region(0x430, 1, "ide") ||
-	    !request_region(0x435, 1, "ide")) {
-		printk(KERN_WARNING
-			"ide: IO port 0x430 and 0x435 are reserved for IDE"
-			" the card using these ports may not work\n");
-	}
-
-	if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET] == HD_DATA &&
-	    ide_hwifs[1].io_ports[IDE_DATA_OFFSET] == HD_DATA) {
-		ide_hwifs[0].chipset = ide_pc9800;
-		ide_hwifs[0].mate = &ide_hwifs[1];
-		ide_hwifs[0].selectproc = pc9800_select;
-		ide_hwifs[1].chipset = ide_pc9800;
-		ide_hwifs[1].mate = &ide_hwifs[0];
-		ide_hwifs[1].selectproc = pc9800_select;
-	}
-}

drivers/input/keyboard/98kbd.c

-/*
- *  drivers/input/keyboard/98kbd.c
- *
- *  PC-9801 keyboard driver for Linux
- *
- *    Based on atkbd.c and xtkbd.c written by Vojtech Pavlik
- *
- *  Copyright (c) 2002 Osamu Tomita
- *  Copyright (c) 1999-2001 Vojtech Pavlik
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/init.h>
-#include <linux/serio.h>
-
-#include <asm/io.h>
-#include <asm/pc9800.h>
-
-MODULE_AUTHOR("Osamu Tomita <tomita@cinet.co.jp>");
-MODULE_DESCRIPTION("PC-9801 keyboard driver");
-MODULE_LICENSE("GPL");
-
-#define KBD98_KEY	0x7f
-#define KBD98_RELEASE	0x80
-
-static unsigned char kbd98_keycode[256] = {
-	  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 43, 14, 15,
-	 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 41, 26, 28, 30, 31, 32,
-	 33, 34, 35, 36, 37, 38, 39, 40, 27, 44, 45, 46, 47, 48, 49, 50,
-	 51, 52, 53, 12, 57, 92,109,104,110,111,103,105,106,108,102,107,
-	 74, 98, 71, 72, 73, 55, 75, 76, 77, 78, 79, 80, 81,117, 82,121,
-	 83, 94, 87, 88,183,184,185,  0,  0,  0,  0,  0,  0,  0,102,  0,
-	 99,133, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68,  0,  0,  0,  0,
-	 54, 58, 42, 56, 29
-};
-
-struct jis_kbd_conv {
-	unsigned char scancode;
-	struct {
-		unsigned char shift;
-		unsigned char keycode;
-	} emul[2];
-};
-
-static struct jis_kbd_conv kbd98_jis[] = {
-	{0x02, {{0,   3}, {1,  40}}},
-	{0x06, {{0,   7}, {1,   8}}},
-	{0x07, {{0,   8}, {0,  40}}},
-	{0x08, {{0,   9}, {1,  10}}},
-	{0x09, {{0,  10}, {1,  11}}},
-	{0x0a, {{0,  11}, {1, 255}}},
-	{0x0b, {{0,  12}, {0,  13}}},
-	{0x0c, {{1,   7}, {0,  41}}},
-	{0x1a, {{1,   3}, {1,  41}}},
-	{0x26, {{0,  39}, {1,  13}}},
-	{0x27, {{1,  39}, {1,   9}}},
-	{0x33, {{0, 255}, {1,  12}}},
-	{0xff, {{0, 255}, {1, 255}}}	/* terminater */
-};
-
-#define KBD98_CMD_SETEXKEY	0x1095	/* Enable/Disable Windows, Appli key */
-#define KBD98_CMD_SETRATE	0x109c	/* Set typematic rate */
-#define KBD98_CMD_SETLEDS	0x109d	/* Set keyboard leds */
-#define KBD98_CMD_GETLEDS	0x119d	/* Get keyboard leds */
-#define KBD98_CMD_GETID		0x019f
-
-#define KBD98_RET_ACK		0xfa
-#define KBD98_RET_NAK		0xfc	/* Command NACK, send the cmd again */
-
-#define KBD98_KEY_JIS_EMUL	253
-#define KBD98_KEY_UNKNOWN	254
-#define KBD98_KEY_NULL		255
-
-static char *kbd98_name = "PC-9801 Keyboard";
-
-struct kbd98 {
-	unsigned char keycode[256];
-	struct input_dev dev;
-	struct serio *serio;
-	char phys[32];
-	unsigned char cmdbuf[4];
-	unsigned char cmdcnt;
-	signed char ack;
-	unsigned char shift;
-	struct {
-		unsigned char scancode;
-		unsigned char keycode;
-	} emul;
-	struct jis_kbd_conv jis[16];
-};
-
-irqreturn_t kbd98_interrupt(struct serio *serio, unsigned char data,
-			    unsigned int flags, struct pt_regs *regs)
-{
-	struct kbd98 *kbd98 = serio->private;
-	unsigned char scancode, keycode;
-	int press, i;
-
-	switch (data) {
-		case KBD98_RET_ACK:
-			kbd98->ack = 1;
-			goto out;
-		case KBD98_RET_NAK:
-			kbd98->ack = -1;
-			goto out;
-	}
-
-	if (kbd98->cmdcnt) {
-		kbd98->cmdbuf[--kbd98->cmdcnt] = data;
-		goto out;
-	}
-
-	scancode = data & KBD98_KEY;
-	keycode = kbd98->keycode[scancode];
-	press = !(data & KBD98_RELEASE);
-	if (kbd98->emul.scancode != KBD98_KEY_UNKNOWN
-	    && scancode != kbd98->emul.scancode) {
-		input_report_key(&kbd98->dev, kbd98->emul.keycode, 0);
-		kbd98->emul.scancode = KBD98_KEY_UNKNOWN;
-	}
-
-	if (keycode == KEY_RIGHTSHIFT)
-		kbd98->shift = press;
-
-	switch (keycode) {
-		case KEY_2:
-		case KEY_6:
-		case KEY_7:
-		case KEY_8:
-		case KEY_9:
-		case KEY_0:
-		case KEY_MINUS:
-		case KEY_EQUAL:
-		case KEY_GRAVE:
-		case KEY_SEMICOLON:
-		case KEY_APOSTROPHE:
-			/* emulation: JIS keyboard to US101 keyboard */
-			i = 0;
-			while (kbd98->jis[i].scancode != 0xff) {
-				if (scancode == kbd98->jis[i].scancode)
-					break;
-				i ++;
-			}
-
-			keycode = kbd98->jis[i].emul[kbd98->shift].keycode;
-			if (keycode == KBD98_KEY_NULL)
-				break;
-
-			if (press) {
-				kbd98->emul.scancode = scancode;
-				kbd98->emul.keycode = keycode;
-				if (kbd98->jis[i].emul[kbd98->shift].shift
-								!= kbd98->shift)
-					input_report_key(&kbd98->dev,
-							KEY_RIGHTSHIFT,
-							!(kbd98->shift));
-			}
-
-			input_report_key(&kbd98->dev, keycode, press);
-			if (!press) {
-				if (kbd98->jis[i].emul[kbd98->shift].shift
-								!= kbd98->shift)
-					input_report_key(&kbd98->dev,
-							KEY_RIGHTSHIFT,
-							kbd98->shift);
-				kbd98->emul.scancode = KBD98_KEY_UNKNOWN;
-			}
-
-			input_sync(&kbd98->dev);
-			break;
-
-		case KEY_CAPSLOCK:
-			input_report_key(&kbd98->dev, keycode, 1);
-			input_sync(&kbd98->dev);
-			input_report_key(&kbd98->dev, keycode, 0);
-			input_sync(&kbd98->dev);
-			break;
-
-		case KBD98_KEY_NULL:
-			break;
-
-		case 0:
-			printk(KERN_WARNING "kbd98.c: Unknown key (scancode %#x) %s.\n",
-				data & KBD98_KEY, data & KBD98_RELEASE ? "released" : "pressed");
-			break;
-
-		default:
-			input_report_key(&kbd98->dev, keycode, press);
-			input_sync(&kbd98->dev);
-			break;
-	}
-
-out:
-	return IRQ_HANDLED;
-}
-
-/*
- * kbd98_sendbyte() sends a byte to the keyboard, and waits for
- * acknowledge. It doesn't handle resends according to the keyboard
- * protocol specs, because if these are needed, the keyboard needs
- * replacement anyway, and they only make a mess in the protocol.
- */
-
-static int kbd98_sendbyte(struct kbd98 *kbd98, unsigned char byte)
-{
-	int timeout = 10000; /* 100 msec */
-	kbd98->ack = 0;
-
-	if (serio_write(kbd98->serio, byte))
-		return -1;
-
-	while (!kbd98->ack && timeout--) udelay(10);
-
-	return -(kbd98->ack <= 0);
-}
-
-/*
- * kbd98_command() sends a command, and its parameters to the keyboard,
- * then waits for the response and puts it in the param array.
- */
-
-static int kbd98_command(struct kbd98 *kbd98, unsigned char *param, int command)
-{
-	int timeout = 50000; /* 500 msec */
-	int send = (command >> 12) & 0xf;
-	int receive = (command >> 8) & 0xf;
-	int i;
-
-	kbd98->cmdcnt = receive;
-
-	if (command & 0xff)
-		if (kbd98_sendbyte(kbd98, command & 0xff))
-			return (kbd98->cmdcnt = 0) - 1;
-
-	for (i = 0; i < send; i++)
-		if (kbd98_sendbyte(kbd98, param[i]))
-			return (kbd98->cmdcnt = 0) - 1;
-
-	while (kbd98->cmdcnt && timeout--) udelay(10);
-
-	if (param)
-		for (i = 0; i < receive; i++)
-			param[i] = kbd98->cmdbuf[(receive - 1) - i];
-
-	if (kbd98->cmdcnt)
-		return (kbd98->cmdcnt = 0) - 1;
-
-	return 0;
-}
-
-/*
- * Event callback from the input module. Events that change the state of
- * the hardware are processed here.
- */
-
-static int kbd98_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-{
-	struct kbd98 *kbd98 = dev->private;
-	char param[2];
-
-	switch (type) {
-
-		case EV_LED:
-
-			if (__PC9800SCA_TEST_BIT(0x481, 3)) {
-				/* 98note with Num Lock key */
-				/* keep Num Lock status     */
-				*param = 0x60;
-				if (kbd98_command(kbd98, param,
-							KBD98_CMD_GETLEDS))
-					printk(KERN_DEBUG
-						"kbd98: Get keyboard LED"
-						" status Error\n");
-
-				*param &= 1;
-			} else {
-				/* desktop PC-9801 */
-				*param = 1;	/* Always set Num Lock */
-			}
-
-			*param |= 0x70
-			       | (test_bit(LED_CAPSL,   dev->led) ? 4 : 0)
-			       | (test_bit(LED_KANA,    dev->led) ? 8 : 0);
-		        kbd98_command(kbd98, param, KBD98_CMD_SETLEDS);
-
-			return 0;
-	}
-
-	return -1;
-}
-
-void kbd98_connect(struct serio *serio, struct serio_dev *dev)
-{
-	struct kbd98 *kbd98;
-	int i;
-
-	if ((serio->type & SERIO_TYPE) != SERIO_PC9800)
-		return;
-
-	if (!(kbd98 = kmalloc(sizeof(struct kbd98), GFP_KERNEL)))
-		return;
-
-	memset(kbd98, 0, sizeof(struct kbd98));
-	kbd98->emul.scancode = KBD98_KEY_UNKNOWN;
-
-	kbd98->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
-	kbd98->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_KANA);
-
-	kbd98->serio = serio;
-
-	init_input_dev(&kbd98->dev);
-	kbd98->dev.keycode = kbd98->keycode;
-	kbd98->dev.keycodesize = sizeof(unsigned char);
-	kbd98->dev.keycodemax = ARRAY_SIZE(kbd98_keycode);
-	kbd98->dev.event = kbd98_event;
-	kbd98->dev.private = kbd98;
-
-	serio->private = kbd98;
-
-	if (serio_open(serio, dev)) {
-		kfree(kbd98);
-		return;
-	}
-
-	memcpy(kbd98->jis, kbd98_jis, sizeof(kbd98_jis));
-	memcpy(kbd98->keycode, kbd98_keycode, sizeof(kbd98->keycode));
-	for (i = 0; i < 255; i++)
-		set_bit(kbd98->keycode[i], kbd98->dev.keybit);
-	clear_bit(0, kbd98->dev.keybit);
-
-	sprintf(kbd98->phys, "%s/input0", serio->phys);
-
-	kbd98->dev.name = kbd98_name;
-	kbd98->dev.phys = kbd98->phys;
-	kbd98->dev.id.bustype = BUS_XTKBD;
-	kbd98->dev.id.vendor = 0x0002;
-	kbd98->dev.id.product = 0x0001;
-	kbd98->dev.id.version = 0x0100;
-
-	input_register_device(&kbd98->dev);
-
-	printk(KERN_INFO "input: %s on %s\n", kbd98_name, serio->phys);
-}
-
-void kbd98_disconnect(struct serio *serio)
-{
-	struct kbd98 *kbd98 = serio->private;
-	input_unregister_device(&kbd98->dev);
-	serio_close(serio);
-	kfree(kbd98);
-}
-
-struct serio_dev kbd98_dev = {
-	.interrupt =	kbd98_interrupt,
-	.connect =	kbd98_connect,
-	.disconnect =	kbd98_disconnect
-};
-
-int __init kbd98_init(void)
-{
-	serio_register_device(&kbd98_dev);
-	return 0;
-}
-
-void __exit kbd98_exit(void)
-{
-	serio_unregister_device(&kbd98_dev);
-}
-
-module_init(kbd98_init);
-module_exit(kbd98_exit);

drivers/input/misc/98spkr.c

-/*
- *  PC-9800 Speaker beeper driver for Linux
- *
- *  Copyright (c) 2002 Osamu Tomita
- *  Copyright (c) 2002 Vojtech Pavlik
- *  Copyright (c) 1992 Orest Zborowski
- *
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <asm/8253pit.h>
-#include <asm/io.h>
-
-MODULE_AUTHOR("Osamu Tomita <tomita@cinet.co.jp>");
-MODULE_DESCRIPTION("PC-9800 Speaker beeper driver");
-MODULE_LICENSE("GPL");
-
-static char spkr98_name[] = "PC-9801 Speaker";
-static char spkr98_phys[] = "isa3fdb/input0";
-static struct input_dev spkr98_dev;
-
-spinlock_t i8253_beep_lock = SPIN_LOCK_UNLOCKED;
-
-static int spkr98_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-{
-	unsigned int count = 0;
-	unsigned long flags;
-
-	if (type != EV_SND)
-		return -1;
-
-	switch (code) {
-		case SND_BELL: if (value) value = 1000;
-		case SND_TONE: break;
-		default: return -1;
-	}
-
-	if (value > 20 && value < 32767)
-		count = PIT_TICK_RATE / value;
-
-	spin_lock_irqsave(&i8253_beep_lock, flags);
-
-	if (count) {
-		outb(0x76, 0x3fdf);
-		outb(0, 0x5f);
-		outb(count & 0xff, 0x3fdb);
-		outb(0, 0x5f);
-		outb((count >> 8) & 0xff, 0x3fdb);
-		/* beep on */
-		outb(6, 0x37);
-	} else {
-		/* beep off */
-		outb(7, 0x37);
-	}
-
-	spin_unlock_irqrestore(&i8253_beep_lock, flags);
-
-	return 0;
-}
-
-static int __init spkr98_init(void)
-{
-	spkr98_dev.evbit[0] = BIT(EV_SND);
-	spkr98_dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
-	spkr98_dev.event = spkr98_event;
-
-	spkr98_dev.name = spkr98_name;
-	spkr98_dev.phys = spkr98_phys;
-	spkr98_dev.id.bustype = BUS_ISA;
-	spkr98_dev.id.vendor = 0x001f;
-	spkr98_dev.id.product = 0x0001;
-	spkr98_dev.id.version = 0x0100;
-
-	input_register_device(&spkr98_dev);
-
-        printk(KERN_INFO "input: %s\n", spkr98_name);
-
-	return 0;
-}
-
-static void __exit spkr98_exit(void)
-{
-        input_unregister_device(&spkr98_dev);
-}
-
-module_init(spkr98_init);
-module_exit(spkr98_exit);

drivers/input/mouse/98busmouse.c

-/*
- *
- *  Copyright (c) 2002 Osamu Tomita
- *
- *  Based on the work of:
- *	James Banks		Matthew Dillon
- *	David Giller		Nathan Laredo
- *	Linus Torvalds		Johan Myreen
- *	Cliff Matthews		Philip Blundell
- *	Russell King		Vojtech Pavlik
- */
-
-/*
- * NEC PC-9801 Bus Mouse Driver for Linux
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or 
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- * 
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-MODULE_AUTHOR("Osamu Tomita <tomita@cinet.co.jp>");
-MODULE_DESCRIPTION("PC-9801 busmouse driver");
-MODULE_LICENSE("GPL");
-
-#define	PC98BM_BASE		0x7fd9
-#define	PC98BM_DATA_PORT	PC98BM_BASE + 0
-/*	PC98BM_SIGNATURE_PORT	does not exist */
-#define	PC98BM_CONTROL_PORT	PC98BM_BASE + 4
-/*	PC98BM_INTERRUPT_PORT	does not exist */
-#define	PC98BM_CONFIG_PORT	PC98BM_BASE + 6
-
-#define	PC98BM_ENABLE_IRQ	0x00
-#define	PC98BM_DISABLE_IRQ	0x10
-#define	PC98BM_READ_X_LOW	0x80
-#define	PC98BM_READ_X_HIGH	0xa0
-#define	PC98BM_READ_Y_LOW	0xc0
-#define	PC98BM_READ_Y_HIGH	0xe0
-
-#define PC98BM_DEFAULT_MODE	0x93
-/*	PC98BM_CONFIG_BYTE	is not used */
-/*	PC98BM_SIGNATURE_BYTE	is not used */
-
-#define PC98BM_TIMER_PORT	0xbfdb
-#define PC98BM_DEFAULT_TIMER_VAL	0x00
-
-#define PC98BM_IRQ		13
-
-static int pc98bm_irq = PC98BM_IRQ;
-module_param_named(irq, pc98bm_irq, uint, 0);
-MODULE_PARM_DESC(irq, "IRQ number (13=default)");
-
-__obsolete_setup("pc98bm_irq=");
-
-static int pc98bm_used = 0;
-
-static irqreturn_t pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-
-static int pc98bm_open(struct input_dev *dev)
-{
-	if (pc98bm_used++)
-		return 0;
-	if (request_irq(pc98bm_irq, pc98bm_interrupt, 0, "98busmouse", NULL)) {
-		pc98bm_used--;
-		printk(KERN_ERR "98busmouse.c: Can't allocate irq %d\n", pc98bm_irq);
-		return -EBUSY;
-	}
-	outb(PC98BM_ENABLE_IRQ, PC98BM_CONTROL_PORT);
-	return 0;
-}
-
-static void pc98bm_close(struct input_dev *dev)
-{
-	if (--pc98bm_used)
-		return;
-	outb(PC98BM_DISABLE_IRQ, PC98BM_CONTROL_PORT);
-	free_irq(pc98bm_irq, NULL);
-}
-
-static struct input_dev pc98bm_dev = {
-	.evbit	= { BIT(EV_KEY) | BIT(EV_REL) },
-	.keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
-	.relbit	= { BIT(REL_X) | BIT(REL_Y) },
-	.open	= pc98bm_open,
-	.close	= pc98bm_close,
-	.name	= "PC-9801 bus mouse",
-	.phys	= "isa7fd9/input0",
-	.id	= {
-		.bustype = BUS_ISA,
-		.vendor  = 0x0004,
-		.product = 0x0001,
-		.version = 0x0100,
-	},
-};
-
-static irqreturn_t pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-	char dx, dy;
-	unsigned char buttons;
-
-	outb(PC98BM_READ_X_LOW, PC98BM_CONTROL_PORT);
-	dx = (inb(PC98BM_DATA_PORT) & 0xf);
-	outb(PC98BM_READ_X_HIGH, PC98BM_CONTROL_PORT);
-	dx |= (inb(PC98BM_DATA_PORT) & 0xf) << 4;
-	outb(PC98BM_READ_Y_LOW, PC98BM_CONTROL_PORT);
-	dy = (inb(PC98BM_DATA_PORT) & 0xf);
-	outb(PC98BM_READ_Y_HIGH, PC98BM_CONTROL_PORT);
-	buttons = inb(PC98BM_DATA_PORT);
-	dy |= (buttons & 0xf) << 4;
-	buttons = ~buttons >> 5;
-
-	input_report_rel(&pc98bm_dev, REL_X, dx);
-	input_report_rel(&pc98bm_dev, REL_Y, dy);
-	input_report_key(&pc98bm_dev, BTN_RIGHT,  buttons & 1);
-	input_report_key(&pc98bm_dev, BTN_MIDDLE, buttons & 2);
-	input_report_key(&pc98bm_dev, BTN_LEFT,   buttons & 4);
-	input_sync(&pc98bm_dev);
-
-	outb(PC98BM_ENABLE_IRQ, PC98BM_CONTROL_PORT);
-
-	return IRQ_HANDLED;
-}
-
-static int __init pc98bm_init(void)
-{
-	int i;
-
-	for (i = 0; i <= 6; i += 2) {
-		if (!request_region(PC98BM_BASE + i, 1, "98busmouse")) {
-			printk(KERN_ERR "98busmouse.c: Can't allocate ports at %#x\n", PC98BM_BASE + i);
-			while (i > 0) {
-				i -= 2;
-				release_region(PC98BM_BASE + i, 1);
-			}
-
-			return -EBUSY;
-		}
-
-	}
-
-	if (!request_region(PC98BM_TIMER_PORT, 1, "98busmouse")) {
-		printk(KERN_ERR "98busmouse.c: Can't allocate ports at %#x\n", PC98BM_TIMER_PORT);
-		for (i = 0; i <= 6; i += 2)
-			release_region(PC98BM_BASE + i, 1);
-
-		return -EBUSY;
-	}
-
-	outb(PC98BM_DEFAULT_MODE, PC98BM_CONFIG_PORT);
-	outb(PC98BM_DISABLE_IRQ, PC98BM_CONTROL_PORT);
-
-	outb(PC98BM_DEFAULT_TIMER_VAL, PC98BM_TIMER_PORT);
-
-	input_register_device(&pc98bm_dev);
-	
-	printk(KERN_INFO "input: PC-9801 bus mouse at %#x irq %d\n", PC98BM_BASE, pc98bm_irq);
-
-	return 0;
-}
-
-static void __exit pc98bm_exit(void)
-{
-	int i;
-
-	input_unregister_device(&pc98bm_dev);
-	for (i = 0; i <= 6; i += 2)
-		release_region(PC98BM_BASE + i, 1);
-
-	release_region(PC98BM_TIMER_PORT, 1);
-}
-
-module_init(pc98bm_init);
-module_exit(pc98bm_exit);

drivers/input/serio/98kbd-io.c

-/*
- *  NEC PC-9801 keyboard controller driver for Linux
- *
- *  Copyright (c) 1999-2002 Osamu Tomita <tomita@cinet.co.jp>
- *    Based on i8042.c written by Vojtech Pavlik
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/config.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/serio.h>
-#include <linux/sched.h>
-
-#include <asm/io.h>
-
-MODULE_AUTHOR("Osamu Tomita <tomita@cinet.co.jp>");
-MODULE_DESCRIPTION("NEC PC-9801 keyboard controller driver");
-MODULE_LICENSE("GPL");
-
-/*
- * Names.
- */
-
-#define KBD98_PHYS_DESC "isa0041/serio0"
-
-/*
- * IRQs.
- */
-
-#define KBD98_IRQ	1
-
-/*
- * Register numbers.
- */
-
-#define KBD98_COMMAND_REG	0x43
-#define KBD98_STATUS_REG	0x43
-#define KBD98_DATA_REG		0x41
-
-spinlock_t kbd98io_lock = SPIN_LOCK_UNLOCKED;
-
-static struct serio kbd98_port;
-extern struct pt_regs *kbd_pt_regs;
-
-static irqreturn_t kbd98io_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-
-/*
- * kbd98_flush() flushes all data that may be in the keyboard buffers
- */
-
-static int kbd98_flush(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&kbd98io_lock, flags);
-
-	while (inb(KBD98_STATUS_REG) & 0x02) /* RxRDY */
-		inb(KBD98_DATA_REG);
-
-	if (inb(KBD98_STATUS_REG) & 0x38)
-		printk("98kbd-io: Keyboard error!\n");
-
-	spin_unlock_irqrestore(&kbd98io_lock, flags);
-
-	return 0;
-}
-
-/*
- * kbd98_write() sends a byte out through the keyboard interface.
- */
-
-static int kbd98_write(struct serio *port, unsigned char c)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&kbd98io_lock, flags);
-
-	outb(0, 0x5f);			/* wait */
-	outb(0x17, KBD98_COMMAND_REG);	/* enable send command */
-	outb(0, 0x5f);			/* wait */
-	outb(c, KBD98_DATA_REG);
-	outb(0, 0x5f);			/* wait */
-	outb(0x16, KBD98_COMMAND_REG);	/* disable send command */
-	outb(0, 0x5f);			/* wait */
-
-	spin_unlock_irqrestore(&kbd98io_lock, flags);
-
-	return 0;
-}
-
-/*
- * kbd98_open() is called when a port is open by the higher layer.
- * It allocates the interrupt and enables in in the chip.
- */
-
-static int kbd98_open(struct serio *port)
-{
-	kbd98_flush();
-
-	if (request_irq(KBD98_IRQ, kbd98io_interrupt, 0, "kbd98", NULL)) {
-		printk(KERN_ERR "98kbd-io.c: Can't get irq %d for %s, unregistering the port.\n", KBD98_IRQ, "KBD");
-		serio_unregister_port(port);
-		return -1;
-	}
-
-	return 0;
-}
-
-static void kbd98_close(struct serio *port)
-{
-	free_irq(KBD98_IRQ, NULL);
-
-	kbd98_flush();
-}
-
-/*
- * Structures for registering the devices in the serio.c module.
- */
-
-static struct serio kbd98_port =
-{
-	.type =		SERIO_PC9800,
-	.write =	kbd98_write,
-	.open =		kbd98_open,
-	.close =	kbd98_close,
-	.driver =	NULL,
-	.name =		"PC-9801 Kbd Port",
-	.phys =		KBD98_PHYS_DESC,
-};
-
-/*
- * kbd98io_interrupt() is the most important function in this driver -
- * it handles the interrupts from keyboard, and sends incoming bytes
- * to the upper layers.
- */
-
-static irqreturn_t kbd98io_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-	unsigned long flags;
-	unsigned char data;
-
-	spin_lock_irqsave(&kbd98io_lock, flags);
-
-	data = inb(KBD98_DATA_REG);
-	spin_unlock_irqrestore(&kbd98io_lock, flags);
-	serio_interrupt(&kbd98_port, data, 0, regs);
-
-	return IRQ_HANDLED;
-}
-
-int __init kbd98io_init(void)
-{
-	serio_register_port(&kbd98_port);
-
-	printk(KERN_INFO "serio: PC-9801 %s port at %#lx,%#lx irq %d\n",
-	       "KBD",
-	       (unsigned long) KBD98_DATA_REG,
-	       (unsigned long) KBD98_COMMAND_REG,
-	       KBD98_IRQ);
-
-	return 0;
-}
-
-void __exit kbd98io_exit(void)
-{
-	serio_unregister_port(&kbd98_port);
-}
-
-module_init(kbd98io_init);
-module_exit(kbd98io_exit);

drivers/scsi/pc980155.h

-/*
- *
- *  drivers/scsi/pc980155.h
- *
- *  PC-9801-55 SCSI host adapter driver
- *
- *  Copyright (C) 1997-2003  Kyoto University Microcomputer Club
- *			     (Linux/98 project)
- *			     Tomoharu Ugawa <ohirune@kmc.gr.jp>
- *
- */
-
-#ifndef __PC980155_H
-#define __PC980155_H
-
-#include "wd33c93.h"
-
-#define REG_ADDRST (base_io)
-#define REG_CONTRL (base_io + 2)
-#define REG_CWRITE (base_io + 4)
-#define REG_STATRD (base_io + 4)
-
-#define WD_MEMORYBANK	0x30
-#define WD_RESETINT	0x33
-
-static inline uchar read_pc980155(const wd33c93_regs regs, uchar reg_num)
-{
-	outb(reg_num, regs.SASR);
-	return (uchar)inb(regs.SCMD);
-}
-
-static inline void write_memorybank(const wd33c93_regs regs, uchar value)
-{
-      outb(WD_MEMORYBANK, regs.SASR);
-      outb(value, regs.SCMD);
-}
-
-#define read_pc980155_resetint(regs) \
-	read_pc980155((regs), WD_RESETINT)
-#define pc980155_int_enable(regs) \
-	write_memorybank((regs), read_pc980155((regs), WD_MEMORYBANK) | 0x04)
-
-#define pc980155_int_disable(regs) \
-	write_memorybank((regs), read_pc980155((regs), WD_MEMORYBANK) & ~0x04)
-
-#define pc980155_assert_bus_reset(regs) \
-	write_memorybank((regs), read_pc980155((regs), WD_MEMORYBANK) | 0x02)
-
-#define pc980155_negate_bus_reset(regs) \
-	write_memorybank((regs), read_pc980155((regs), WD_MEMORYBANK) & ~0x02)
-
-#endif /* __PC980155_H */

drivers/scsi/scsi_pc98.c

-/*
- *  Copyright (C) 2003  Osamu Tomita <tomita@cinet.co.jp>
- *
- *  PC9801 BIOS geometry handling.
- */
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/genhd.h>
-#include <linux/blkdev.h>
-#include <asm/pc9800.h>
-
-#include "scsi.h"
-#include "hosts.h"
-
-
-static int pc98_first_bios_param(struct scsi_device *sdev, int *ip)
-{
-	const u8 *p = (&__PC9800SCA(u8, PC9800SCA_SCSI_PARAMS) + sdev->id * 4);
-
-	ip[0] = p[1];   /* # of heads */
-	ip[1] = p[0];   /* # of sectors/track */
-	ip[2] = *(u16 *)&p[2] & 0x0fff; /* # of cylinders */
-	if (p[3] & (1 << 6)) { /* #-of-cylinders is 16-bit */
-		ip[2] |= (ip[0] & 0xf0) << 8;
-		ip[0] &= 0x0f;
-	}
-
-	return 0;
-}
-
-int pc98_bios_param(struct scsi_device *sdev, struct block_device *bdev,
-			sector_t capacity, int *ip)
-{
-	struct Scsi_Host *first_real = first_real_host();
-
-	/*
-	 * XXX
-	 * XXX This needs to become a sysfs attribute that's set
-	 * XXX by code that knows which host is the first one.
-	 * XXX
-	 * XXX Currently we support only one host on with a
-	 * XXX PC98ish HBA.
-	 * XXX
-	 */
-	if (1 || sdev->host == first_real && sdev->id < 7 &&
-	    __PC9800SCA_TEST_BIT(PC9800SCA_DISK_EQUIPS, sdev->id))
-	    	return pc98_first_bios_param(sdev, ip);
-
-	/* Assume PC-9801-92 compatible parameters for HAs without BIOS.  */
-	ip[0] = 8;
-	ip[1] = 32;
-	ip[2] = capacity / (8 * 32);
-	if (ip[2] > 65535) {    /* if capacity >= 8GB */
-		/* Recent on-board adapters seem to use this parameter. */
-		ip[1] = 128;
-		ip[2] = capacity / (8 * 128);
-		if (ip[2] > 65535) { /* if capacity >= 32GB  */
-			/* Clip the number of cylinders.  Currently
-			   this is the limit that we deal with.  */
-			ip[2] = 65535;
-		}
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pc98_bios_param);

fs/partitions/nec98.h

-/*
- *  NEC PC-9800 series partition supports
- *
- *  Copyright (C) 1998-2000	Kyoto University Microcomputer Club
- */
-
-#define NEC98_PTABLE_MAGIC	0xAA55
-
-extern int nec98_partition(struct parsed_partitions *state,
-				struct block_device *bdev);

include/asm-i386/mach-pc9800/bios_ebda.h

-#ifndef _MACH_BIOS_EBDA_H
-#define _MACH_BIOS_EBDA_H
-
-/*
- * PC-9800 has no EBDA.
- * Its BIOS uses 0x40E for other purpose,
- * Not pointer to 4K EBDA area.
- */
-static inline unsigned int get_bios_ebda(void)
-{
-	return 0;	/* 0 means none */
-}
-
-#endif /* _MACH_BIOS_EBDA_H */