Commit b22c2ac4 authored by Sébastien Szymanski's avatar Sébastien Szymanski Committed by Shawn Guo

ARM: dts: imx6qdl-apf6: fix WiFi

These changes make the WiFi on the APF6 board work again.
Signed-off-by: default avatarSébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 827f16f7
......@@ -5,6 +5,24 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
vin-supply = <&reg_3p3v>;
};
usdhc1_pwrseq: usdhc1-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
post-power-on-delay-ms = <15>;
power-off-delay-us = <70>;
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
......@@ -40,6 +58,12 @@ &uart2 {
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
mmc-pwrseq = <&usdhc1_pwrseq>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
cap-power-off-card;
keep-power-in-suspend;
non-removable;
status = "okay";
......@@ -106,8 +130,8 @@ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* WL_EN */
MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* WL_IRQ */
MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x130b0 /* WL_EN */
MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x130b0 /* WL_IRQ */
>;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment