x86: Move find_smp_config() earlier and avoid bootmem usage

Move the find_smp_config() call to before bootmem is initialized.
Use reserve_early() instead of reserve_bootmem() in it.

This simplifies the code, we only need to call find_smp_config()
once and can remove the now unneeded reserve parameter from
x86_init_mpparse::find_smp_config.

We thus also reduce x86's dependency on bootmem allocations.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B0BB9F2.70907@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/include/asm/mpspec.h

@@ -71,12 +71,7 @@ static inline void early_get_smp_config(void)
 
 static inline void find_smp_config(void)
 {
-	x86_init.mpparse.find_smp_config(1);
-}
-
-static inline void early_find_smp_config(void)
-{
-	x86_init.mpparse.find_smp_config(0);
+	x86_init.mpparse.find_smp_config();
 }
 
 #ifdef CONFIG_X86_MPPARSE
@@ -89,7 +84,7 @@ extern void default_mpc_oem_bus_info(struct mpc_bus *m, char *str);
 # else
 #  define default_mpc_oem_bus_info NULL
 # endif
-extern void default_find_smp_config(unsigned int reserve);
+extern void default_find_smp_config(void);
 extern void default_get_smp_config(unsigned int early);
 #else
 static inline void early_reserve_e820_mpc_new(void) { }
@@ -97,7 +92,7 @@ static inline void early_reserve_e820_mpc_new(void) { }
 #define default_mpc_apic_id NULL
 #define default_smp_read_mpc_oem NULL
 #define default_mpc_oem_bus_info NULL
-#define default_find_smp_config x86_init_uint_noop
+#define default_find_smp_config x86_init_noop
 #define default_get_smp_config x86_init_uint_noop
 #endif
 

arch/x86/include/asm/x86_init.h

@@ -26,7 +26,7 @@ struct x86_init_mpparse {
 	void (*smp_read_mpc_oem)(struct mpc_table *mpc);
 	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
 	void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name);
-	void (*find_smp_config)(unsigned int reserve);
+	void (*find_smp_config)(void);
 	void (*get_smp_config)(unsigned int early);
 };
 

arch/x86/kernel/apic/numaq_32.c

@@ -263,11 +263,6 @@ static void __init smp_read_mpc_oem(struct mpc_table *mpc)
 
 static __init void early_check_numaq(void)
 {
-	/*
-	 * Find possible boot-time SMP configuration:
-	 */
-	early_find_smp_config();
-
 	/*
 	 * get boot-time SMP configuration:
 	 */

arch/x86/kernel/mpparse.c

@@ -667,36 +667,18 @@ void __init default_get_smp_config(unsigned int early)
 	 */
 }
 
-static void __init smp_reserve_bootmem(struct mpf_intel *mpf)
+static void __init smp_reserve_memory(struct mpf_intel *mpf)
 {
 	unsigned long size = get_mpc_size(mpf->physptr);
-#ifdef CONFIG_X86_32
-	/*
-	 * We cannot access to MPC table to compute table size yet,
-	 * as only few megabytes from the bottom is mapped now.
-	 * PC-9800's MPC table places on the very last of physical
-	 * memory; so that simply reserving PAGE_SIZE from mpf->physptr
-	 * yields BUG() in reserve_bootmem.
-	 * also need to make sure physptr is below than max_low_pfn
-	 * we don't need reserve the area above max_low_pfn
-	 */
-	unsigned long end = max_low_pfn * PAGE_SIZE;
 
-	if (mpf->physptr < end) {
-		if (mpf->physptr + size > end)
-			size = end - mpf->physptr;
-		reserve_bootmem_generic(mpf->physptr, size, BOOTMEM_DEFAULT);
-	}
-#else
-	reserve_bootmem_generic(mpf->physptr, size, BOOTMEM_DEFAULT);
-#endif
+	reserve_early(mpf->physptr, mpf->physptr+size, "MP-table mpc");
 }
 
-static int __init smp_scan_config(unsigned long base, unsigned long length,
-				  unsigned reserve)
+static int __init smp_scan_config(unsigned long base, unsigned long length)
 {
 	unsigned int *bp = phys_to_virt(base);
 	struct mpf_intel *mpf;
+	unsigned long mem;
 
 	apic_printk(APIC_VERBOSE, "Scan SMP from %p for %ld bytes.\n",
 			bp, length);
@@ -717,12 +699,10 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 			printk(KERN_INFO "found SMP MP-table at [%p] %llx\n",
 			       mpf, (u64)virt_to_phys(mpf));
 
-			if (!reserve)
-				return 1;
-			reserve_bootmem_generic(virt_to_phys(mpf), sizeof(*mpf),
-						BOOTMEM_DEFAULT);
+			mem = virt_to_phys(mpf);
+			reserve_early(mem, mem + sizeof(*mpf), "MP-table mpf");
 			if (mpf->physptr)
-				smp_reserve_bootmem(mpf);
+				smp_reserve_memory(mpf);
 
 			return 1;
 		}
@@ -732,7 +712,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	return 0;
 }
 
-void __init default_find_smp_config(unsigned int reserve)
+void __init default_find_smp_config(void)
 {
 	unsigned int address;
 
@@ -744,9 +724,9 @@ void __init default_find_smp_config(unsigned int reserve)
 	 * 2) Scan the top 1K of base RAM
 	 * 3) Scan the 64K of bios
 	 */
-	if (smp_scan_config(0x0, 0x400, reserve) ||
-	    smp_scan_config(639 * 0x400, 0x400, reserve) ||
-	    smp_scan_config(0xF0000, 0x10000, reserve))
+	if (smp_scan_config(0x0, 0x400) ||
+	    smp_scan_config(639 * 0x400, 0x400) ||
+	    smp_scan_config(0xF0000, 0x10000))
 		return;
 	/*
 	 * If it is an SMP machine we should know now, unless the
@@ -767,7 +747,7 @@ void __init default_find_smp_config(unsigned int reserve)
 
 	address = get_bios_ebda();
 	if (address)
-		smp_scan_config(address, 0x400, reserve);
+		smp_scan_config(address, 0x400);
 }
 
 #ifdef CONFIG_X86_IO_APIC

arch/x86/kernel/setup.c

@@ -913,6 +913,11 @@ void __init setup_arch(char **cmdline_p)
 
 	early_acpi_boot_init();
 
+	/*
+	 * Find and reserve possible boot-time SMP configuration:
+	 */
+	find_smp_config();
+
 #ifdef CONFIG_ACPI_NUMA
 	/*
 	 * Parse SRAT to discover nodes.
@@ -927,11 +932,6 @@ void __init setup_arch(char **cmdline_p)
 
 	initmem_init(0, max_pfn, acpi, k8);
 
-	/*
-	 * Find and reserve possible boot-time SMP configuration:
-	 */
-	find_smp_config();
-
 #ifdef CONFIG_X86_64
 	/*
 	 * dma32_reserve_bootmem() allocates bootmem which may conflict

arch/x86/kernel/visws_quirks.c

@@ -197,7 +197,7 @@ static void __init MP_processor_info(struct mpc_cpu *m)
 	apic_version[m->apicid] = ver;
 }
 
-static void __init visws_find_smp_config(unsigned int reserve)
+static void __init visws_find_smp_config(void)
 {
 	struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS);
 	unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));

arch/x86/mm/k8topology_64.c

@@ -57,18 +57,6 @@ static __init void early_get_boot_cpu_id(void)
 	 * need to get boot_cpu_id so can use that to create apicid_to_node
 	 * in k8_scan_nodes()
 	 */
-	/*
-	 * Find possible boot-time SMP configuration:
-	 */
-#ifdef CONFIG_X86_MPPARSE
-	early_find_smp_config();
-#endif
-#ifdef CONFIG_ACPI
-	/*
-	 * Read APIC information from ACPI tables.
-	 */
-	early_acpi_boot_init();
-#endif
 #ifdef CONFIG_X86_MPPARSE
 	/*
 	 * get boot-time SMP configuration: