Commit b25dd284 authored by Linus Torvalds's avatar Linus Torvalds

Merge HEAD from master.kernel.org:/home/rmk/linux-2.6-arm.git

parents 80ac2912 147056fb
...@@ -24,6 +24,7 @@ ...@@ -24,6 +24,7 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/list.h> #include <linux/list.h>
#include <linux/smp.h> #include <linux/smp.h>
#include <linux/cpumask.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/io.h> #include <asm/io.h>
......
...@@ -433,10 +433,12 @@ void timer_dyn_reprogram(void) ...@@ -433,10 +433,12 @@ void timer_dyn_reprogram(void)
{ {
struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
write_seqlock(&xtime_lock); if (dyn_tick) {
if (dyn_tick->state & DYN_TICK_ENABLED) write_seqlock(&xtime_lock);
dyn_tick->reprogram(next_timer_interrupt() - jiffies); if (dyn_tick->state & DYN_TICK_ENABLED)
write_sequnlock(&xtime_lock); dyn_tick->reprogram(next_timer_interrupt() - jiffies);
write_sequnlock(&xtime_lock);
}
} }
static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf) static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf)
......
...@@ -38,90 +38,6 @@ ...@@ -38,90 +38,6 @@
#include <asm/mach/irq.h> #include <asm/mach/irq.h>
#include <asm/mach/time.h> #include <asm/mach/time.h>
enum ixp4xx_irq_type {
IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
};
static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
/*************************************************************************
* GPIO acces functions
*************************************************************************/
/*
* Configure GPIO line for input, interrupt, or output operation
*
* TODO: Enable/disable the irq_desc based on interrupt or output mode.
* TODO: Should these be named ixp4xx_gpio_?
*/
void gpio_line_config(u8 line, u32 style)
{
static const int gpio2irq[] = {
6, 7, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29
};
u32 enable;
volatile u32 *int_reg;
u32 int_style;
enum ixp4xx_irq_type irq_type;
enable = *IXP4XX_GPIO_GPOER;
if (style & IXP4XX_GPIO_OUT) {
enable &= ~((1) << line);
} else if (style & IXP4XX_GPIO_IN) {
enable |= ((1) << line);
switch (style & IXP4XX_GPIO_INTSTYLE_MASK)
{
case (IXP4XX_GPIO_ACTIVE_HIGH):
int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
irq_type = IXP4XX_IRQ_LEVEL;
break;
case (IXP4XX_GPIO_ACTIVE_LOW):
int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
irq_type = IXP4XX_IRQ_LEVEL;
break;
case (IXP4XX_GPIO_RISING_EDGE):
int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
irq_type = IXP4XX_IRQ_EDGE;
break;
case (IXP4XX_GPIO_FALLING_EDGE):
int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
irq_type = IXP4XX_IRQ_EDGE;
break;
case (IXP4XX_GPIO_TRANSITIONAL):
int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
irq_type = IXP4XX_IRQ_EDGE;
break;
default:
int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
irq_type = IXP4XX_IRQ_LEVEL;
break;
}
if (style & IXP4XX_GPIO_INTSTYLE_MASK)
ixp4xx_config_irq(gpio2irq[line], irq_type);
if (line >= 8) { /* pins 8-15 */
line -= 8;
int_reg = IXP4XX_GPIO_GPIT2R;
}
else { /* pins 0-7 */
int_reg = IXP4XX_GPIO_GPIT1R;
}
/* Clear the style for the appropriate pin */
*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
(line * IXP4XX_GPIO_STYLE_SIZE));
/* Set the new style */
*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
}
*IXP4XX_GPIO_GPOER = enable;
}
EXPORT_SYMBOL(gpio_line_config);
/************************************************************************* /*************************************************************************
* IXP4xx chipset I/O mapping * IXP4xx chipset I/O mapping
*************************************************************************/ *************************************************************************/
...@@ -165,6 +81,69 @@ void __init ixp4xx_map_io(void) ...@@ -165,6 +81,69 @@ void __init ixp4xx_map_io(void)
* (be it PCI or something else) configures that GPIO line * (be it PCI or something else) configures that GPIO line
* as an IRQ. * as an IRQ.
**************************************************************************/ **************************************************************************/
enum ixp4xx_irq_type {
IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
};
static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
/*
* IRQ -> GPIO mapping table
*/
static int irq2gpio[32] = {
-1, -1, -1, -1, -1, -1, 0, 1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, 2, 3, 4, 5, 6,
7, 8, 9, 10, 11, 12, -1, -1,
};
static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
{
int line = irq2gpio[irq];
u32 int_style;
enum ixp4xx_irq_type irq_type;
volatile u32 *int_reg;
/*
* Only for GPIO IRQs
*/
if (line < 0)
return -EINVAL;
if (type & IRQT_BOTHEDGE) {
int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
irq_type = IXP4XX_IRQ_EDGE;
} else if (type & IRQT_RISING) {
int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
irq_type = IXP4XX_IRQ_EDGE;
} else if (type & IRQT_FALLING) {
int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
irq_type = IXP4XX_IRQ_EDGE;
} else if (type & IRQT_HIGH) {
int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
irq_type = IXP4XX_IRQ_LEVEL;
} else if (type & IRQT_LOW) {
int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
irq_type = IXP4XX_IRQ_LEVEL;
}
ixp4xx_config_irq(irq, irq_type);
if (line >= 8) { /* pins 8-15 */
line -= 8;
int_reg = IXP4XX_GPIO_GPIT2R;
} else { /* pins 0-7 */
int_reg = IXP4XX_GPIO_GPIT1R;
}
/* Clear the style for the appropriate pin */
*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
(line * IXP4XX_GPIO_STYLE_SIZE));
/* Set the new style */
*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
}
static void ixp4xx_irq_mask(unsigned int irq) static void ixp4xx_irq_mask(unsigned int irq)
{ {
if (cpu_is_ixp46x() && irq >= 32) if (cpu_is_ixp46x() && irq >= 32)
...@@ -183,12 +162,6 @@ static void ixp4xx_irq_unmask(unsigned int irq) ...@@ -183,12 +162,6 @@ static void ixp4xx_irq_unmask(unsigned int irq)
static void ixp4xx_irq_ack(unsigned int irq) static void ixp4xx_irq_ack(unsigned int irq)
{ {
static int irq2gpio[32] = {
-1, -1, -1, -1, -1, -1, 0, 1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, 2, 3, 4, 5, 6,
7, 8, 9, 10, 11, 12, -1, -1,
};
int line = (irq < 32) ? irq2gpio[irq] : -1; int line = (irq < 32) ? irq2gpio[irq] : -1;
if (line >= 0) if (line >= 0)
...@@ -209,12 +182,14 @@ static struct irqchip ixp4xx_irq_level_chip = { ...@@ -209,12 +182,14 @@ static struct irqchip ixp4xx_irq_level_chip = {
.ack = ixp4xx_irq_mask, .ack = ixp4xx_irq_mask,
.mask = ixp4xx_irq_mask, .mask = ixp4xx_irq_mask,
.unmask = ixp4xx_irq_level_unmask, .unmask = ixp4xx_irq_level_unmask,
.type = ixp4xx_set_irq_type
}; };
static struct irqchip ixp4xx_irq_edge_chip = { static struct irqchip ixp4xx_irq_edge_chip = {
.ack = ixp4xx_irq_ack, .ack = ixp4xx_irq_ack,
.mask = ixp4xx_irq_mask, .mask = ixp4xx_irq_mask,
.unmask = ixp4xx_irq_unmask, .unmask = ixp4xx_irq_unmask,
.type = ixp4xx_set_irq_type
}; };
static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type) static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type)
......
...@@ -30,11 +30,8 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); ...@@ -30,11 +30,8 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
void __init coyote_pci_preinit(void) void __init coyote_pci_preinit(void)
{ {
gpio_line_config(COYOTE_PCI_SLOT0_PIN, set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW);
gpio_line_config(COYOTE_PCI_SLOT1_PIN,
IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
gpio_line_isr_clear(COYOTE_PCI_SLOT0_PIN); gpio_line_isr_clear(COYOTE_PCI_SLOT0_PIN);
gpio_line_isr_clear(COYOTE_PCI_SLOT1_PIN); gpio_line_isr_clear(COYOTE_PCI_SLOT1_PIN);
......
...@@ -24,11 +24,6 @@ ...@@ -24,11 +24,6 @@
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach/flash.h> #include <asm/mach/flash.h>
void __init coyote_map_io(void)
{
ixp4xx_map_io();
}
static struct flash_platform_data coyote_flash_data = { static struct flash_platform_data coyote_flash_data = {
.map_name = "cfi_probe", .map_name = "cfi_probe",
.width = 2, .width = 2,
...@@ -107,7 +102,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") ...@@ -107,7 +102,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
.phys_ram = PHYS_OFFSET, .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = coyote_map_io, .map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq, .init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer, .timer = &ixp4xx_timer,
.boot_params = 0x0100, .boot_params = 0x0100,
...@@ -125,7 +120,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425") ...@@ -125,7 +120,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425")
.phys_ram = PHYS_OFFSET, .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = coyote_map_io, .map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq, .init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer, .timer = &ixp4xx_timer,
.boot_params = 0x0100, .boot_params = 0x0100,
......
...@@ -35,26 +35,20 @@ extern void ixp4xx_pci_preinit(void); ...@@ -35,26 +35,20 @@ extern void ixp4xx_pci_preinit(void);
extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
/*
* The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h
* Slot 0 isn't actually populated with a card connector but
* we initialize it anyway in case a future version has the
* slot populated or someone with good soldering skills has
* some free time.
*/
static void gtwx5715_init_gpio(u8 pin, u32 style)
{
gpio_line_config(pin, style | IXP4XX_GPIO_ACTIVE_LOW);
if (style & IXP4XX_GPIO_IN) gpio_line_isr_clear(pin);
}
/*
* The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h
* Slot 0 isn't actually populated with a card connector but
* we initialize it anyway in case a future version has the
* slot populated or someone with good soldering skills has
* some free time.
*/
void __init gtwx5715_pci_preinit(void) void __init gtwx5715_pci_preinit(void)
{ {
gtwx5715_init_gpio(GTWX5715_PCI_SLOT0_INTA_GPIO, IXP4XX_GPIO_IN); set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW);
gtwx5715_init_gpio(GTWX5715_PCI_SLOT1_INTA_GPIO, IXP4XX_GPIO_IN); set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW);
set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW);
set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW);
ixp4xx_pci_preinit(); ixp4xx_pci_preinit();
} }
......
...@@ -101,12 +101,6 @@ static struct platform_device gtwx5715_uart_device = { ...@@ -101,12 +101,6 @@ static struct platform_device gtwx5715_uart_device = {
.resource = gtwx5715_uart_resources, .resource = gtwx5715_uart_resources,
}; };
void __init gtwx5715_map_io(void)
{
ixp4xx_map_io();
}
static struct flash_platform_data gtwx5715_flash_data = { static struct flash_platform_data gtwx5715_flash_data = {
.map_name = "cfi_probe", .map_name = "cfi_probe",
.width = 2, .width = 2,
...@@ -144,7 +138,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") ...@@ -144,7 +138,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
.phys_ram = PHYS_OFFSET, .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_UART2_BASE_PHYS, .phys_io = IXP4XX_UART2_BASE_PHYS,
.io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
.map_io = gtwx5715_map_io, .map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq, .init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer, .timer = &ixp4xx_timer,
.boot_params = 0x0100, .boot_params = 0x0100,
......
...@@ -27,14 +27,10 @@ ...@@ -27,14 +27,10 @@
void __init ixdp425_pci_preinit(void) void __init ixdp425_pci_preinit(void)
{ {
gpio_line_config(IXDP425_PCI_INTA_PIN, set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW);
IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW);
gpio_line_config(IXDP425_PCI_INTB_PIN, set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW);
IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW);
gpio_line_config(IXDP425_PCI_INTC_PIN,
IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
gpio_line_config(IXDP425_PCI_INTD_PIN,
IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
gpio_line_isr_clear(IXDP425_PCI_INTA_PIN); gpio_line_isr_clear(IXDP425_PCI_INTA_PIN);
gpio_line_isr_clear(IXDP425_PCI_INTB_PIN); gpio_line_isr_clear(IXDP425_PCI_INTB_PIN);
......
...@@ -24,11 +24,6 @@ ...@@ -24,11 +24,6 @@
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach/flash.h> #include <asm/mach/flash.h>
void __init ixdp425_map_io(void)
{
ixp4xx_map_io();
}
static struct flash_platform_data ixdp425_flash_data = { static struct flash_platform_data ixdp425_flash_data = {
.map_name = "cfi_probe", .map_name = "cfi_probe",
.width = 2, .width = 2,
...@@ -133,7 +128,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") ...@@ -133,7 +128,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
.phys_ram = PHYS_OFFSET, .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = ixdp425_map_io, .map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq, .init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer, .timer = &ixp4xx_timer,
.boot_params = 0x0100, .boot_params = 0x0100,
...@@ -145,7 +140,7 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") ...@@ -145,7 +140,7 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
.phys_ram = PHYS_OFFSET, .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = ixdp425_map_io, .map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq, .init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer, .timer = &ixp4xx_timer,
.boot_params = 0x0100, .boot_params = 0x0100,
...@@ -157,7 +152,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") ...@@ -157,7 +152,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
.phys_ram = PHYS_OFFSET, .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = ixdp425_map_io, .map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq, .init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer, .timer = &ixp4xx_timer,
.boot_params = 0x0100, .boot_params = 0x0100,
...@@ -176,7 +171,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform") ...@@ -176,7 +171,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
.phys_ram = PHYS_OFFSET, .phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
.map_io = ixdp425_map_io, .map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq, .init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer, .timer = &ixp4xx_timer,
.boot_params = 0x0100, .boot_params = 0x0100,
......
...@@ -29,8 +29,8 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); ...@@ -29,8 +29,8 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
void __init ixdpg425_pci_preinit(void) void __init ixdpg425_pci_preinit(void)
{ {
gpio_line_config(6, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
gpio_line_config(7, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW);
gpio_line_isr_clear(6); gpio_line_isr_clear(6);
gpio_line_isr_clear(7); gpio_line_isr_clear(7);
......
...@@ -388,6 +388,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, ...@@ -388,6 +388,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
unsigned long hclk, unsigned long hclk,
unsigned long pclk) unsigned long pclk)
{ {
unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
struct clk *clkp = init_clocks; struct clk *clkp = init_clocks;
int ptr; int ptr;
int ret; int ret;
...@@ -446,5 +447,13 @@ int __init s3c24xx_setup_clocks(unsigned long xtal, ...@@ -446,5 +447,13 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
} }
} }
/* show the clock-slow value */
printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
print_mhz(xtal / ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
(clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
(clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
(clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
return 0; return 0;
} }
...@@ -68,6 +68,7 @@ static struct clk s3c2440_clk_ac97 = { ...@@ -68,6 +68,7 @@ static struct clk s3c2440_clk_ac97 = {
static int s3c2440_clk_add(struct sys_device *sysdev) static int s3c2440_clk_add(struct sys_device *sysdev)
{ {
unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
struct clk *clk_h; struct clk *clk_h;
struct clk *clk_p; struct clk *clk_p;
struct clk *clk_xtal; struct clk *clk_xtal;
...@@ -80,8 +81,9 @@ static int s3c2440_clk_add(struct sys_device *sysdev) ...@@ -80,8 +81,9 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate); s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate);
printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n", printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz, DVS %s\n",
print_mhz(s3c2440_clk_upll.rate)); print_mhz(s3c2440_clk_upll.rate),
(camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
clk_p = clk_get(NULL, "pclk"); clk_p = clk_get(NULL, "pclk");
clk_h = clk_get(NULL, "hclk"); clk_h = clk_get(NULL, "hclk");
......
...@@ -45,7 +45,7 @@ ...@@ -45,7 +45,7 @@
#define LDST_P_EQ_U(i) ((((i) ^ ((i) >> 1)) & (1 << 23)) == 0) #define LDST_P_EQ_U(i) ((((i) ^ ((i) >> 1)) & (1 << 23)) == 0)
#define LDSTH_I_BIT(i) (i & (1 << 22)) /* half-word immed */ #define LDSTHD_I_BIT(i) (i & (1 << 22)) /* double/half-word immed */
#define LDM_S_BIT(i) (i & (1 << 22)) /* write CPSR from SPSR */ #define LDM_S_BIT(i) (i & (1 << 22)) /* write CPSR from SPSR */
#define RN_BITS(i) ((i >> 16) & 15) /* Rn */ #define RN_BITS(i) ((i >> 16) & 15) /* Rn */
...@@ -68,6 +68,7 @@ static unsigned long ai_sys; ...@@ -68,6 +68,7 @@ static unsigned long ai_sys;
static unsigned long ai_skipped; static unsigned long ai_skipped;
static unsigned long ai_half; static unsigned long ai_half;
static unsigned long ai_word; static unsigned long ai_word;
static unsigned long ai_dword;
static unsigned long ai_multi; static unsigned long ai_multi;
static int ai_usermode; static int ai_usermode;
...@@ -93,6 +94,8 @@ proc_alignment_read(char *page, char **start, off_t off, int count, int *eof, ...@@ -93,6 +94,8 @@ proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
p += sprintf(p, "Skipped:\t%lu\n", ai_skipped); p += sprintf(p, "Skipped:\t%lu\n", ai_skipped);
p += sprintf(p, "Half:\t\t%lu\n", ai_half); p += sprintf(p, "Half:\t\t%lu\n", ai_half);
p += sprintf(p, "Word:\t\t%lu\n", ai_word); p += sprintf(p, "Word:\t\t%lu\n", ai_word);
if (cpu_architecture() >= CPU_ARCH_ARMv5TE)
p += sprintf(p, "DWord:\t\t%lu\n", ai_dword);
p += sprintf(p, "Multi:\t\t%lu\n", ai_multi); p += sprintf(p, "Multi:\t\t%lu\n", ai_multi);
p += sprintf(p, "User faults:\t%i (%s)\n", ai_usermode, p += sprintf(p, "User faults:\t%i (%s)\n", ai_usermode,
usermode_action[ai_usermode]); usermode_action[ai_usermode]);
...@@ -283,12 +286,6 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r ...@@ -283,12 +286,6 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
{ {
unsigned int rd = RD_BITS(instr); unsigned int rd = RD_BITS(instr);
if ((instr & 0x01f00ff0) == 0x01000090)
goto swp;
if ((instr & 0x90) != 0x90 || (instr & 0x60) == 0)
goto bad;
ai_half += 1; ai_half += 1;
if (user_mode(regs)) if (user_mode(regs))
...@@ -323,10 +320,47 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r ...@@ -323,10 +320,47 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
return TYPE_LDST; return TYPE_LDST;
swp: fault:
printk(KERN_ERR "Alignment trap: not handling swp instruction\n"); return TYPE_FAULT;
bad: }
return TYPE_ERROR;
static int
do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
struct pt_regs *regs)
{
unsigned int rd = RD_BITS(instr);
ai_dword += 1;
if (user_mode(regs))
goto user;
if ((instr & 0xf0) == 0xd0) {
unsigned long val;
get32_unaligned_check(val, addr);
regs->uregs[rd] = val;
get32_unaligned_check(val, addr+4);
regs->uregs[rd+1] = val;
} else {
put32_unaligned_check(regs->uregs[rd], addr);
put32_unaligned_check(regs->uregs[rd+1], addr+4);
}
return TYPE_LDST;
user:
if ((instr & 0xf0) == 0xd0) {
unsigned long val;
get32t_unaligned_check(val, addr);
regs->uregs[rd] = val;
get32t_unaligned_check(val, addr+4);
regs->uregs[rd+1] = val;
} else {
put32t_unaligned_check(regs->uregs[rd], addr);
put32t_unaligned_check(regs->uregs[rd+1], addr+4);
}
return TYPE_LDST;
fault: fault:
return TYPE_FAULT; return TYPE_FAULT;
...@@ -617,12 +651,20 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) ...@@ -617,12 +651,20 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
regs->ARM_pc += thumb_mode(regs) ? 2 : 4; regs->ARM_pc += thumb_mode(regs) ? 2 : 4;
switch (CODING_BITS(instr)) { switch (CODING_BITS(instr)) {
case 0x00000000: /* ldrh or strh */ case 0x00000000: /* 3.13.4 load/store instruction extensions */
if (LDSTH_I_BIT(instr)) if (LDSTHD_I_BIT(instr))
offset.un = (instr & 0xf00) >> 4 | (instr & 15); offset.un = (instr & 0xf00) >> 4 | (instr & 15);
else else
offset.un = regs->uregs[RM_BITS(instr)]; offset.un = regs->uregs[RM_BITS(instr)];
handler = do_alignment_ldrhstrh;
if ((instr & 0x000000f0) == 0x000000b0 || /* LDRH, STRH */
(instr & 0x001000f0) == 0x001000f0) /* LDRSH */
handler = do_alignment_ldrhstrh;
else if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */
(instr & 0x001000f0) == 0x000000f0) /* STRD */
handler = do_alignment_ldrdstrd;
else
goto bad;
break; break;
case 0x04000000: /* ldr or str immediate */ case 0x04000000: /* ldr or str immediate */
......
...@@ -275,11 +275,9 @@ alloc_init_supersection(unsigned long virt, unsigned long phys, int prot) ...@@ -275,11 +275,9 @@ alloc_init_supersection(unsigned long virt, unsigned long phys, int prot)
int i; int i;
for (i = 0; i < 16; i += 1) { for (i = 0; i < 16; i += 1) {
alloc_init_section(virt, phys & SUPERSECTION_MASK, alloc_init_section(virt, phys, prot | PMD_SECT_SUPER);
prot | PMD_SECT_SUPER);
virt += (PGDIR_SIZE / 2); virt += (PGDIR_SIZE / 2);
phys += (PGDIR_SIZE / 2);
} }
} }
......
...@@ -383,39 +383,45 @@ __ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count) ...@@ -383,39 +383,45 @@ __ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
*vaddr++ = inl(io_addr); *vaddr++ = inl(io_addr);
} }
#define __is_io_address(p) (((unsigned long)p >= 0x0) && \ #define PIO_OFFSET 0x10000UL
((unsigned long)p <= 0x0000ffff)) #define PIO_MASK 0x0ffffUL
#define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \
((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
static inline unsigned int static inline unsigned int
__ixp4xx_ioread8(void __iomem *port) __ixp4xx_ioread8(void __iomem *addr)
{ {
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port)) if (__is_io_address(port))
return (unsigned int)__ixp4xx_inb((unsigned int)port); return (unsigned int)__ixp4xx_inb(port & PIO_MASK);
else else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI #ifndef CONFIG_IXP4XX_INDIRECT_PCI
return (unsigned int)__raw_readb((u32)port); return (unsigned int)__raw_readb(port);
#else #else
return (unsigned int)__ixp4xx_readb((u32)port); return (unsigned int)__ixp4xx_readb(port);
#endif #endif
} }
static inline void static inline void
__ixp4xx_ioread8_rep(u32 port, u8 *vaddr, u32 count) __ixp4xx_ioread8_rep(void __iomem *addr, void *vaddr, u32 count)
{ {
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port)) if (__is_io_address(port))
__ixp4xx_insb(port, vaddr, count); __ixp4xx_insb(port & PIO_MASK, vaddr, count);
else else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI #ifndef CONFIG_IXP4XX_INDIRECT_PCI
__raw_readsb((void __iomem *)port, vaddr, count); __raw_readsb(addr, vaddr, count);
#else #else
__ixp4xx_readsb(port, vaddr, count); __ixp4xx_readsb(port, vaddr, count);
#endif #endif
} }
static inline unsigned int static inline unsigned int
__ixp4xx_ioread16(void __iomem *port) __ixp4xx_ioread16(void __iomem *addr)
{ {
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port)) if (__is_io_address(port))
return (unsigned int)__ixp4xx_inw((unsigned int)port); return (unsigned int)__ixp4xx_inw(port & PIO_MASK);
else else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI #ifndef CONFIG_IXP4XX_INDIRECT_PCI
return le16_to_cpu(__raw_readw((u32)port)); return le16_to_cpu(__raw_readw((u32)port));
...@@ -425,23 +431,25 @@ __ixp4xx_ioread16(void __iomem *port) ...@@ -425,23 +431,25 @@ __ixp4xx_ioread16(void __iomem *port)
} }
static inline void static inline void
__ixp4xx_ioread16_rep(u32 port, u16 *vaddr, u32 count) __ixp4xx_ioread16_rep(void __iomem *addr, void *vaddr, u32 count)
{ {
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port)) if (__is_io_address(port))
__ixp4xx_insw(port, vaddr, count); __ixp4xx_insw(port & PIO_MASK, vaddr, count);
else else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI #ifndef CONFIG_IXP4XX_INDIRECT_PCI
__raw_readsw((void __iomem *)port, vaddr, count); __raw_readsw(addr, vaddr, count);
#else #else
__ixp4xx_readsw(port, vaddr, count); __ixp4xx_readsw(port, vaddr, count);
#endif #endif
} }
static inline unsigned int static inline unsigned int
__ixp4xx_ioread32(void __iomem *port) __ixp4xx_ioread32(void __iomem *addr)
{ {
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port)) if (__is_io_address(port))
return (unsigned int)__ixp4xx_inl((unsigned int)port); return (unsigned int)__ixp4xx_inl(port & PIO_MASK);
else { else {
#ifndef CONFIG_IXP4XX_INDIRECT_PCI #ifndef CONFIG_IXP4XX_INDIRECT_PCI
return le32_to_cpu(__raw_readl((u32)port)); return le32_to_cpu(__raw_readl((u32)port));
...@@ -452,90 +460,100 @@ __ixp4xx_ioread32(void __iomem *port) ...@@ -452,90 +460,100 @@ __ixp4xx_ioread32(void __iomem *port)
} }
static inline void static inline void
__ixp4xx_ioread32_rep(u32 port, u32 *vaddr, u32 count) __ixp4xx_ioread32_rep(void __iomem *addr, void *vaddr, u32 count)
{ {
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port)) if (__is_io_address(port))
__ixp4xx_insl(port, vaddr, count); __ixp4xx_insl(port & PIO_MASK, vaddr, count);
else else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI #ifndef CONFIG_IXP4XX_INDIRECT_PCI
__raw_readsl((void __iomem *)port, vaddr, count); __raw_readsl(addr, vaddr, count);
#else #else
__ixp4xx_readsl(port, vaddr, count); __ixp4xx_readsl(port, vaddr, count);
#endif #endif
} }
static inline void static inline void
__ixp4xx_iowrite8(u8 value, void __iomem *port) __ixp4xx_iowrite8(u8 value, void __iomem *addr)
{ {
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port)) if (__is_io_address(port))
__ixp4xx_outb(value, (unsigned int)port); __ixp4xx_outb(value, port & PIO_MASK);
else else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI #ifndef CONFIG_IXP4XX_INDIRECT_PCI
__raw_writeb(value, (u32)port); __raw_writeb(value, port);
#else #else
__ixp4xx_writeb(value, (u32)port); __ixp4xx_writeb(value, port);
#endif #endif
} }
static inline void static inline void
__ixp4xx_iowrite8_rep(u32 port, u8 *vaddr, u32 count) __ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count)
{ {
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port)) if (__is_io_address(port))
__ixp4xx_outsb(port, vaddr, count); __ixp4xx_outsb(port & PIO_MASK, vaddr, count);
else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI #ifndef CONFIG_IXP4XX_INDIRECT_PCI
__raw_writesb((void __iomem *)port, vaddr, count); __raw_writesb(addr, vaddr, count);
#else #else
__ixp4xx_writesb(port, vaddr, count); __ixp4xx_writesb(port, vaddr, count);
#endif #endif
} }
static inline void static inline void
__ixp4xx_iowrite16(u16 value, void __iomem *port) __ixp4xx_iowrite16(u16 value, void __iomem *addr)
{ {
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port)) if (__is_io_address(port))
__ixp4xx_outw(value, (unsigned int)port); __ixp4xx_outw(value, port & PIO_MASK);
else else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI #ifndef CONFIG_IXP4XX_INDIRECT_PCI
__raw_writew(cpu_to_le16(value), (u32)port); __raw_writew(cpu_to_le16(value), addr);
#else #else
__ixp4xx_writew(value, (u32)port); __ixp4xx_writew(value, port);
#endif #endif
} }
static inline void static inline void
__ixp4xx_iowrite16_rep(u32 port, u16 *vaddr, u32 count) __ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count)
{ {
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port)) if (__is_io_address(port))
__ixp4xx_outsw(port, vaddr, count); __ixp4xx_outsw(port & PIO_MASK, vaddr, count);
else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI #ifndef CONFIG_IXP4XX_INDIRECT_PCI
__raw_readsw((void __iomem *)port, vaddr, count); __raw_writesw(addr, vaddr, count);
#else #else
__ixp4xx_writesw(port, vaddr, count); __ixp4xx_writesw(port, vaddr, count);
#endif #endif
} }
static inline void static inline void
__ixp4xx_iowrite32(u32 value, void __iomem *port) __ixp4xx_iowrite32(u32 value, void __iomem *addr)
{ {
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port)) if (__is_io_address(port))
__ixp4xx_outl(value, (unsigned int)port); __ixp4xx_outl(value, port & PIO_MASK);
else else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI #ifndef CONFIG_IXP4XX_INDIRECT_PCI
__raw_writel(cpu_to_le32(value), (u32)port); __raw_writel(cpu_to_le32(value), port);
#else #else
__ixp4xx_writel(value, (u32)port); __ixp4xx_writel(value, port);
#endif #endif
} }
static inline void static inline void
__ixp4xx_iowrite32_rep(u32 port, u32 *vaddr, u32 count) __ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
{ {
unsigned long port = (unsigned long __force)addr;
if (__is_io_address(port)) if (__is_io_address(port))
__ixp4xx_outsl(port, vaddr, count); __ixp4xx_outsl(port & PIO_MASK, vaddr, count);
else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI #ifndef CONFIG_IXP4XX_INDIRECT_PCI
__raw_readsl((void __iomem *)port, vaddr, count); __raw_writesl(addr, vaddr, count);
#else #else
__ixp4xx_outsl(port, vaddr, count); __ixp4xx_writesl(port, vaddr, count);
#endif #endif
} }
...@@ -555,7 +573,7 @@ __ixp4xx_iowrite32_rep(u32 port, u32 *vaddr, u32 count) ...@@ -555,7 +573,7 @@ __ixp4xx_iowrite32_rep(u32 port, u32 *vaddr, u32 count)
#define iowrite16_rep(p, v, c) __ixp4xx_iowrite16_rep(p, v, c) #define iowrite16_rep(p, v, c) __ixp4xx_iowrite16_rep(p, v, c)
#define iowrite32_rep(p, v, c) __ixp4xx_iowrite32_rep(p, v, c) #define iowrite32_rep(p, v, c) __ixp4xx_iowrite32_rep(p, v, c)
#define ioport_map(port, nr) ((void __iomem*)port) #define ioport_map(port, nr) ((void __iomem*)(port + PIO_OFFSET))
#define ioport_unmap(addr) #define ioport_unmap(addr)
#endif // __ASM_ARM_ARCH_IO_H #endif // __ASM_ARM_ARCH_IO_H
......
...@@ -83,17 +83,6 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); ...@@ -83,17 +83,6 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
#define IXP4XX_GPIO_OUT 0x1 #define IXP4XX_GPIO_OUT 0x1
#define IXP4XX_GPIO_IN 0x2 #define IXP4XX_GPIO_IN 0x2
#define IXP4XX_GPIO_INTSTYLE_MASK 0x7C /* Bits [6:2] define interrupt style */
/*
* GPIO interrupt types.
*/
#define IXP4XX_GPIO_ACTIVE_HIGH 0x4 /* Default */
#define IXP4XX_GPIO_ACTIVE_LOW 0x8
#define IXP4XX_GPIO_RISING_EDGE 0x10
#define IXP4XX_GPIO_FALLING_EDGE 0x20
#define IXP4XX_GPIO_TRANSITIONAL 0x40
/* GPIO signal types */ /* GPIO signal types */
#define IXP4XX_GPIO_LOW 0 #define IXP4XX_GPIO_LOW 0
#define IXP4XX_GPIO_HIGH 1 #define IXP4XX_GPIO_HIGH 1
...@@ -102,7 +91,13 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); ...@@ -102,7 +91,13 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
#define IXP4XX_GPIO_CLK_0 14 #define IXP4XX_GPIO_CLK_0 14
#define IXP4XX_GPIO_CLK_1 15 #define IXP4XX_GPIO_CLK_1 15
extern void gpio_line_config(u8 line, u32 style); static inline void gpio_line_config(u8 line, u32 direction)
{
if (direction == IXP4XX_GPIO_OUT)
*IXP4XX_GPIO_GPOER |= (1 << line);
else
*IXP4XX_GPIO_GPOER &= ~(1 << line);
}
static inline void gpio_line_get(u8 line, int *value) static inline void gpio_line_get(u8 line, int *value)
{ {
......
...@@ -818,6 +818,23 @@ ...@@ -818,6 +818,23 @@
#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge #define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
Interrupt Enable */ Interrupt Enable */
#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */
#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */
#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */
#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */
#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */
#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */
#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */
#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */
#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */
#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */
#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */
#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */
#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */
#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */
#define UDCCSN(x) __REG2(0x40600100, (x) << 2) #define UDCCSN(x) __REG2(0x40600100, (x) << 2)
#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ #define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
#define UDCCSR0_SA (1 << 7) /* Setup Active */ #define UDCCSR0_SA (1 << 7) /* Setup Active */
...@@ -1423,6 +1440,7 @@ ...@@ -1423,6 +1440,7 @@
#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) #define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN)
#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) #define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT)
#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) #define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT)
#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT)
#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) #define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT)
#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) #define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT)
#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) #define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT)
...@@ -1510,6 +1528,8 @@ ...@@ -1510,6 +1528,8 @@
#define PSSR_BFS (1 << 1) /* Battery Fault Status */ #define PSSR_BFS (1 << 1) /* Battery Fault Status */
#define PSSR_SSS (1 << 0) /* Software Sleep Status */ #define PSSR_SSS (1 << 0) /* Software Sleep Status */
#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
#define PCFR_RO (1 << 15) /* RDH Override */ #define PCFR_RO (1 << 15) /* RDH Override */
#define PCFR_PO (1 << 14) /* PH Override */ #define PCFR_PO (1 << 14) /* PH Override */
#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */ #define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */
...@@ -1517,6 +1537,7 @@ ...@@ -1517,6 +1537,7 @@
#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */ #define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */
#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */ #define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */
#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */ #define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */
#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */
#define PCFR_DS (1 << 3) /* Deep Sleep Mode */ #define PCFR_DS (1 << 3) /* Deep Sleep Mode */
#define PCFR_FS (1 << 2) /* Float Static Chip Selects */ #define PCFR_FS (1 << 2) /* Float Static Chip Selects */
#define PCFR_FP (1 << 1) /* Float PCMCIA controls */ #define PCFR_FP (1 << 1) /* Float PCMCIA controls */
...@@ -1810,6 +1831,11 @@ ...@@ -1810,6 +1831,11 @@
#define LCCR0_PDD_S 12 #define LCCR0_PDD_S 12
#define LCCR0_BM (1 << 20) /* Branch mask */ #define LCCR0_BM (1 << 20) /* Branch mask */
#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ #define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
#define LCCR0_LCDT (1 << 22) /* LCD panel type */
#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */
#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */
#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */
#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */
#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ #define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */
#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ #define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \
...@@ -2062,7 +2088,10 @@ ...@@ -2062,7 +2088,10 @@
#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ #define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */
#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ #define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */
#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ #define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */
#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ #define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */
#define UHCRHDA_NOCP (1 << 12) /* No over current protection */
#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ #define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */
#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ #define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */
#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ #define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */
......
/* linux/include/asm/arch-s3c2410/regs-clock.h /* linux/include/asm/arch-s3c2410/regs-clock.h
* *
* Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk> * Copyright (c) 2003,2004,2005 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/ * http://armlinux.simtec.co.uk/
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as * it under the terms of the GNU General Public License version 2 as
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
* 29-Sep-2004 Ben Dooks Fixed usage for assembly inclusion * 29-Sep-2004 Ben Dooks Fixed usage for assembly inclusion
* 10-Feb-2005 Ben Dooks Fixed CAMDIVN address (Guillaume Gourat) * 10-Feb-2005 Ben Dooks Fixed CAMDIVN address (Guillaume Gourat)
* 10-Mar-2005 Lucas Villa Real Changed S3C2410_VA to S3C24XX_VA * 10-Mar-2005 Lucas Villa Real Changed S3C2410_VA to S3C24XX_VA
* 27-Aug-2005 Ben Dooks Add clock-slow info
*/ */
#ifndef __ASM_ARM_REGS_CLOCK #ifndef __ASM_ARM_REGS_CLOCK
...@@ -74,6 +75,12 @@ ...@@ -74,6 +75,12 @@
#define S3C2410_CLKDIVN_PDIVN (1<<0) #define S3C2410_CLKDIVN_PDIVN (1<<0)
#define S3C2410_CLKDIVN_HDIVN (1<<1) #define S3C2410_CLKDIVN_HDIVN (1<<1)
#define S3C2410_CLKSLOW_UCLK_OFF (1<<7)
#define S3C2410_CLKSLOW_MPLL_OFF (1<<5)
#define S3C2410_CLKSLOW_SLOW (1<<4)
#define S3C2410_CLKSLOW_SLOWVAL(x) (x)
#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7)
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
static inline unsigned int static inline unsigned int
......
...@@ -515,7 +515,6 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6 ...@@ -515,7 +515,6 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6
#define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_TIME
#define __ARCH_WANT_SYS_UTIME #define __ARCH_WANT_SYS_UTIME
#define __ARCH_WANT_SYS_SOCKETCALL #define __ARCH_WANT_SYS_SOCKETCALL
#define __ARCH_WANT_SYS_FADVISE64
#define __ARCH_WANT_SYS_GETPGRP #define __ARCH_WANT_SYS_GETPGRP
#define __ARCH_WANT_SYS_LLSEEK #define __ARCH_WANT_SYS_LLSEEK
#define __ARCH_WANT_SYS_NICE #define __ARCH_WANT_SYS_NICE
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment