Merge tag 'v4.15-next-dts32' of...

Merge tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt

Pull "arm: Updates of armv7 DTS for v4.15-next" from Matthias Brugger:

- add reset cells mt2701 and mt7623 ethsys
- update mmc nodes for mt7623
- mt7623 change mmc card detection pin to active low
- mt7623 set unit address to lower case

* tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  dt-bindings: ARM: Mediatek: Fix ethsys documentation
  arm: mt7: dts: Remove leading 0x and 0s from bindings notation
  arm: dts: mt7623: fix card detection issue on bananapi-r2
  arm: dts: mt7623: update mmc related nodes with the appropriate fallback
  arm: dts: mt2701: Add reset-cells
  arm: dts: mt7623: Update ethsys binding

Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt

@@ -20,4 +20,5 @@ ethsys: clock-controller@1b000000 {
 	compatible = "mediatek,mt2701-ethsys", "syscon";
 	reg = <0 0x1b000000 0 0x1000>;
 	#clock-cells = <1>;
+	#reset-cells = <1>;
 };

arch/arm/boot/dts/mt2701.dtsi

@@ -604,6 +604,7 @@ hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt2701-hifsys", "syscon";
 		reg = <0 0x1a000000 0 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb0: usb@1a1c0000 {
@@ -688,6 +689,7 @@ ethsys: syscon@1b000000 {
 		compatible = "mediatek,mt2701-ethsys", "syscon";
 		reg = <0 0x1b000000 0 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	eth: ethernet@1b100000 {

arch/arm/boot/dts/mt7623.dtsi

@@ -641,7 +641,7 @@ afe: audio-controller@11220000 {
 
 	mmc0: mmc@11230000 {
 		compatible = "mediatek,mt7623-mmc",
-			     "mediatek,mt8135-mmc";
+			     "mediatek,mt2701-mmc";
 		reg = <0 0x11230000 0 0x1000>;
 		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&pericfg CLK_PERI_MSDC30_0>,
@@ -652,7 +652,7 @@ mmc0: mmc@11230000 {
 
 	mmc1: mmc@11240000 {
 		compatible = "mediatek,mt7623-mmc",
-			     "mediatek,mt8135-mmc";
+			     "mediatek,mt2701-mmc";
 		reg = <0 0x11240000 0 0x1000>;
 		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&pericfg CLK_PERI_MSDC30_1>,
@@ -758,6 +758,7 @@ ethsys: syscon@1b000000 {
 			     "syscon";
 		reg = <0 0x1b000000 0 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	eth: ethernet@1b100000 {

arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts

@@ -204,7 +204,7 @@ &mmc1 {
 	bus-width = <4>;
 	max-frequency = <50000000>;
 	cap-sd-highspeed;
-	cd-gpios = <&pio 261 0>;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&mt6323_vmch_reg>;
 	vqmmc-supply = <&mt6323_vio18_reg>;
 };

arch/arm/boot/dts/mt7623n-rfb-nand.dts

@@ -51,7 +51,7 @@ partition@40000 {
 				reg = <0x40000 0x80000>;
 			};
 
-			partition@C0000 {
+			partition@c0000 {
 				label = "uboot-env";
 				reg = <0xC0000 0x40000>;
 			};