Merge tag 'tegra-for-4.17-arm-dt' of...

Merge tag 'tegra-for-4.17-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

Pull "ARM: tegra: Device tree changes for v4.17-rc1" from Thierry Reding:

Support for the VDE is added on Tegra30 along with some general cleanup
and some improvements to the various Toradex boards.

* tag 'tegra-for-4.17-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: apalis-tk1: Support v1.2 hardware revision
  ARM: tegra: apalis-tk1: Copyright period, spurious newlines
  ARM: tegra: apalis-tk1: Hog group for ethernet, PCIe, reset GPIOs
  ARM: tegra: apalis-tk1: Add missing as3722 gpio0 configuration
  ARM: tegra: apalis-tk1: Activate PWM pin muxing for pwm3
  ARM: tegra: apalis-tk1: Set critical trips
  ARM: tegra: apalis/colibri: Remove unneeded reg property
  ARM: tegra: apalis/colibri: Use correct compatible for RTC
  ARM: tegra: Fix I2C bus frequencies on Apalis/Colibri
  ARM: tegra: venice2: Remove duplicate pcie-1 node
  ARM: tegra: beaver: Remove invalid uses of rsvd1
  ARM: tegra: Use proper IRQ type definitions
  ARM: tegra: Fix ULPI regression on Tegra20
  ARM: tegra: Add unit address to VDE IRAM area
  ARM: tegra: Add video decoder node on Tegra30
  ARM: tegra: Add IRAM node on Tegra30

arch/arm/boot/dts/Makefile

@@ -1037,6 +1037,7 @@ dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
 	tegra114-tn7.dtb
 dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
 	tegra124-apalis-eval.dtb \
+	tegra124-apalis-v1.2-eval.dtb \
 	tegra124-jetson-tk1.dtb \
 	tegra124-nyan-big.dtb \
 	tegra124-nyan-blaze.dtb \

arch/arm/boot/dts/tegra114-dalmore.dts

@@ -780,7 +780,7 @@ rt5640: rt5640@1c {
 			compatible = "realtek,rt5640";
 			reg = <0x1c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
 			realtek,ldo1-en-gpios =
 				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/tegra124-apalis-eval.dts

 /*
- * Copyright 2016 Toradex AG
+ * Copyright 2016-2018 Toradex AG
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -105,7 +105,7 @@ pwm@7000a000 {
 	 */
 	i2c@7000c000 {
 		status = "okay";
-		clock-frequency = <100000>;
+		clock-frequency = <400000>;
 
 		pcie-switch@58 {
 			compatible = "plx,pex8605";
@@ -114,7 +114,7 @@ pcie-switch@58 {
 
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
-			compatible = "st,m41t00";
+			compatible = "st,m41t0";
 			reg = <0x68>;
 		};
 	};
@@ -124,7 +124,6 @@ rtc@68 {
 	 */
 	hdmi_ddc: i2c@7000c400 {
 		status = "okay";
-		clock-frequency = <100000>;
 	};
 
 	/*
@@ -133,7 +132,7 @@ hdmi_ddc: i2c@7000c400 {
 	 */
 	i2c@7000c500 {
 		status = "okay";
-		clock-frequency = <100000>;
+		clock-frequency = <400000>;
 	};
 
 	/* I2C4 (DDC): unused */
@@ -226,9 +225,7 @@ usb-phy@7d008000 {
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-
-		/* BKL1_PWM */
-		pwms = <&pwm 3 5000000>;
+		pwms = <&pwm 3 5000000>; /* BKL1_PWM */
 		brightness-levels = <255 231 223 207 191 159 127 0>;
 		default-brightness-level = <6>;
 		/* BKL1_ON */
@@ -276,3 +273,13 @@ reg_usbh_vbus: regulator-usbh-vbus {
 		vin-supply = <&reg_5v0>;
 	};
 };
+
+&gpio {
+	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+	pex_perst_n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PEX_PERST_N";
+	};
+};

arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts

+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2016-2018 Toradex AG
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis TK1 on Apalis Evaluation Board";
+	compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval",
+		     "toradex,apalis-tk1", "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@40";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pcie@1003000 {
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor
+	 * on carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/*
+	 * I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207
+	 * (e.g. display EDID)
+	 */
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+
+		spidev0: spidev@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+
+	/* SPI4: Apalis SPI2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+
+		spidev1: spidev@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+
+	/* Apalis Serial ATA */
+	sata@70020000 {
+		status = "okay";
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		status = "okay";
+	};
+
+	/* Apalis MMC1 */
+	sdhci@700b0000 {
+		status = "okay";
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc1>;
+	};
+
+	/* Apalis SD1 */
+	sdhci@700b0400 {
+		status = "okay";
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>; /* BKL1_PWM */
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&gpio {
+	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+	pex_perst_n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PEX_PERST_N";
+	};
+};

arch/arm/boot/dts/tegra124-apalis.dtsi

 /*
- * Copyright 2016 Toradex AG
+ * Copyright 2016-2018 Toradex AG
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -56,7 +56,6 @@ memory {
 
 	pcie@1003000 {
 		status = "okay";
-
 		avddio-pex-supply = <&vdd_1v05>;
 		avdd-pex-pll-supply = <&vdd_1v05>;
 		avdd-pll-erefe-supply = <&avdd_1v05>;
@@ -85,7 +84,6 @@ host1x@50000000 {
 		hdmi@54280000 {
 			pll-supply = <&reg_1v05_avdd_hdmi_pll>;
 			vdd-supply = <&reg_3v3_avdd_hdmi>;
-
 			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
 			nvidia,hpd-gpio =
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
@@ -453,12 +451,12 @@ ph2 {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
-			/* PWM3 active on pu6 being Apalis BKL1_PWM */
+			/* PWM3 active on pu6 being Apalis BKL1_PWM as well */
 			ph3 {
 				nvidia,pins = "ph3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 			};
 
@@ -1579,7 +1577,7 @@ serial@70006300 {
 	};
 
 	hdmi_ddc: i2c@7000c400 {
-		clock-frequency = <100000>;
+		clock-frequency = <10000>;
 	};
 
 	/* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */
@@ -1600,15 +1598,11 @@ pmic: pmic@40 {
 			compatible = "ams,as3722";
 			reg = <0x40>;
 			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-
 			ams,system-power-controller;
-
 			#interrupt-cells = <2>;
 			interrupt-controller;
-
 			gpio-controller;
 			#gpio-cells = <2>;
-
 			pinctrl-names = "default";
 			pinctrl-0 = <&as3722_default>;
 
@@ -1620,9 +1614,9 @@ gpio2_7 {
 					bias-pull-up;
 				};
 
-				gpio1_3_4_5_6 {
-					pins = "gpio1", "gpio3", "gpio4",
-					       "gpio5", "gpio6";
+				gpio0_1_3_4_5_6 {
+					pins = "gpio0", "gpio1", "gpio3",
+					       "gpio4", "gpio5", "gpio6";
 					bias-high-impedance;
 				};
 			};
@@ -1783,7 +1777,6 @@ temperature-sensor@4c {
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
-
 			#thermal-sensor-cells = <1>;
 		};
 	};
@@ -1816,7 +1809,6 @@ i2c-thermtrip {
 	sata@70020000 {
 		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
 		phy-names = "sata-0";
-
 		avdd-supply = <&vdd_1v05>;
 		hvdd-supply = <&reg_3v3>;
 		vddio-supply = <&vdd_1v05>;
@@ -1830,7 +1822,6 @@ usb@70090000 {
 		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
 		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
 		phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
-
 		avddio-pex-supply = <&vdd_1v05>;
 		avdd-pll-erefe-supply = <&avdd_1v05>;
 		avdd-pll-utmip-supply = <&vddio_1v8>;
@@ -2041,53 +2032,50 @@ sound {
 	thermal-zones {
 		cpu {
 			trips {
-				trip@0 {
+				cpu-shutdown-trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				/*
-				 * There are currently no cooling maps because
-				 * there are no cooling devices
-				 */
-			};
 		};
 
 		mem {
 			trips {
-				trip@0 {
+				mem-shutdown-trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				/*
-				 * There are currently no cooling maps because
-				 * there are no cooling devices
-				 */
-			};
 		};
 
 		gpu {
 			trips {
-				trip@0 {
+				gpu-shutdown-trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				/*
-				 * There are currently no cooling maps because
-				 * there are no cooling devices
-				 */
-			};
 		};
 	};
 };
+
+&gpio {
+	/* I210 Gigabit Ethernet Controller Reset */
+	lan_reset_n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LAN_RESET_N";
+	};
+
+	/* Control MXM3 pin 26 Reset Module Output Carrier Input */
+	reset_moci_ctrl {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RESET_MOCI_CTRL";
+	};
+};

arch/arm/boot/dts/tegra124-jetson-tk1.dts

@@ -1418,7 +1418,7 @@ rt5639: audio-codec@1c {
 			compatible = "realtek,rt5639";
 			reg = <0x1c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
 			realtek,ldo1-en-gpios =
 				<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/tegra124-venice2.dts

@@ -613,7 +613,7 @@ acodec: audio-codec@10 {
 			compatible = "maxim,max98090";
 			reg = <0x10>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
 		};
 	};
 
@@ -859,7 +859,7 @@ charger: bq24735@9 {
 					reg = <0x9>;
 					interrupt-parent = <&gpio>;
 					interrupts = <TEGRA_GPIO(J, 0)
-							GPIO_ACTIVE_HIGH>;
+							IRQ_TYPE_EDGE_BOTH>;
 					ti,ac-detect-gpios = <&gpio
 							TEGRA_GPIO(J, 0)
 							GPIO_ACTIVE_HIGH>;
@@ -956,11 +956,6 @@ pcie-1 {
 						nvidia,function = "usb3-ss";
 						status = "okay";
 					};
-
-					pcie-1 {
-						nvidia,function = "usb3-ss";
-						status = "okay";
-					};
 				};
 			};
 		};

arch/arm/boot/dts/tegra20-colibri-512.dtsi

@@ -213,21 +213,27 @@ ac97: ac97@70002000 {
 			GPIO_ACTIVE_HIGH>;
 	};
 
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
 	i2c@7000c000 {
 		clock-frequency = <400000>;
 	};
 
+	/* DDC_SCL/SDA on X3 pin 15/16 (e.g. display EDID) */
 	i2c_ddc: i2c@7000c400 {
-		clock-frequency = <100000>;
+		clock-frequency = <10000>;
 	};
 
-	i2c@7000c500 {
-		clock-frequency = <400000>;
-	};
+	/* GEN2_I2C: unused */
 
+	/* CAM/GEN3_I2C: used as EXT_IO1/2 GPIOs on SODIMM pin 133/127 */
+
+	/* PWR_I2C: power I2C to PMIC and temperature sensor (On-module) */
 	i2c@7000d000 {
 		status = "okay";
-		clock-frequency = <400000>;
+		clock-frequency = <100000>;
 
 		pmic: tps6586x@34 {
 			compatible = "ti,tps6586x";

arch/arm/boot/dts/tegra20.dtsi

@@ -17,7 +17,7 @@ iram@40000000 {
 		#size-cells = <1>;
 		ranges = <0 0x40000000 0x40000>;
 
-		vde_pool: vde {
+		vde_pool: vde@400 {
 			reg = <0x400 0x3fc00>;
 			pool;
 		};
@@ -741,7 +741,7 @@ phy2: usb-phy@c5004000 {
 		phy_type = "ulpi";
 		clocks = <&tegra_car TEGRA20_CLK_USB2>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
-			 <&tegra_car TEGRA20_CLK_CDEV2>;
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT4>;
 		clock-names = "reg", "pll_u", "ulpi-link";
 		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";

arch/arm/boot/dts/tegra30-apalis-eval.dts

@@ -79,7 +79,7 @@ pwm@7000a000 {
 	 */
 	i2c@7000c000 {
 		status = "okay";
-		clock-frequency = <100000>;
+		clock-frequency = <400000>;
 
 		pcie-switch@58 {
 			compatible = "plx,pex8605";
@@ -88,7 +88,7 @@ pcie-switch@58 {
 
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
-			compatible = "st,m41t00";
+			compatible = "st,m41t0";
 			reg = <0x68>;
 		};
 	};

arch/arm/boot/dts/tegra30-apalis.dtsi

@@ -437,7 +437,7 @@ pv0 {
 	};
 
 	hdmiddc: i2c@7000c700 {
-		clock-frequency = <100000>;
+		clock-frequency = <10000>;
 	};
 
 	/*
@@ -597,7 +597,6 @@ stmpe811@41 {
 
 			stmpe_touchscreen@0 {
 				compatible = "st,stmpe-ts";
-				reg = <0>;
 				/* 3.25 MHz ADC clock speed */
 				st,adc-freq = <1>;
 				/* 8 sample average control */
@@ -657,7 +656,7 @@ can@1 {
 			reg = <1>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>;
 			spi-max-frequency = <10000000>;
 		};
 	};
@@ -672,7 +671,7 @@ can@0 {
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
 			spi-max-frequency = <10000000>;
 		};
 	};

arch/arm/boot/dts/tegra30-beaver.dts

@@ -260,14 +260,14 @@ lcd_dc1_pd2 {
 			};
 			sdmmc3_dat6_pd3 {
 				nvidia,pins = "sdmmc3_dat6_pd3";
-				nvidia,function = "rsvd1";
+				nvidia,function = "spdif";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 			sdmmc3_dat7_pd4 {
 				nvidia,pins = "sdmmc3_dat7_pd4";
-				nvidia,function = "rsvd1";
+				nvidia,function = "spdif";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
@@ -281,14 +281,14 @@ vi_d1_pd5 {
 			};
 			vi_vsync_pd6 {
 				nvidia,pins = "vi_vsync_pd6";
-				nvidia,function = "rsvd1";
+				nvidia,function = "ddr";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 			vi_hsync_pd7 {
 				nvidia,pins = "vi_hsync_pd7";
-				nvidia,function = "rsvd1";
+				nvidia,function = "ddr";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
@@ -806,7 +806,7 @@ lcd_dc0_pn6 {
 			};
 			hdmi_int_pn7 {
 				nvidia,pins = "hdmi_int_pn7";
-				nvidia,function = "rsvd1";
+				nvidia,function = "hdmi";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
@@ -841,7 +841,7 @@ ulpi_data2_po3 {
 			};
 			ulpi_data3_po4 {
 				nvidia,pins = "ulpi_data3_po4";
-				nvidia,function = "rsvd1";
+				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
@@ -1107,21 +1107,21 @@ vi_mclk_pt1 {
 			};
 			vi_d10_pt2 {
 				nvidia,pins = "vi_d10_pt2";
-				nvidia,function = "rsvd1";
+				nvidia,function = "ddr";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 			vi_d11_pt3 {
 				nvidia,pins = "vi_d11_pt3";
-				nvidia,function = "rsvd1";
+				nvidia,function = "ddr";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 			vi_d0_pt4 {
 				nvidia,pins = "vi_d0_pt4";
-				nvidia,function = "rsvd1";
+				nvidia,function = "ddr";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
@@ -1151,7 +1151,7 @@ sdmmc4_cmd_pt7 {
 			};
 			pu0 {
 				nvidia,pins = "pu0";
-				nvidia,function = "rsvd1";
+				nvidia,function = "owr";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
@@ -1172,7 +1172,7 @@ pu2 {
 			};
 			pu3 {
 				nvidia,pins = "pu3";
-				nvidia,function = "rsvd1";
+				nvidia,function = "pwm0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
@@ -1193,7 +1193,7 @@ pu5 {
 			};
 			pu6 {
 				nvidia,pins = "pu6";
-				nvidia,function = "rsvd1";
+				nvidia,function = "pwm3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
@@ -1221,7 +1221,7 @@ pv2 {
 			};
 			pv3 {
 				nvidia,pins = "pv3";
-				nvidia,function = "rsvd1";
+				nvidia,function = "clk_12m_out";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
@@ -1510,7 +1510,7 @@ sdmmc4_dat7_paa7 {
 			};
 			pbb0 {
 				nvidia,pins = "pbb0";
-				nvidia,function = "rsvd1";
+				nvidia,function = "i2s4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
@@ -1575,7 +1575,7 @@ cam_mclk_pcc0 {
 			};
 			pcc1 {
 				nvidia,pins = "pcc1";
-				nvidia,function = "rsvd1";
+				nvidia,function = "i2s4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
@@ -1762,7 +1762,7 @@ rt5640: rt5640@1c {
 			compatible = "realtek,rt5640";
 			reg = <0x1c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_FALLING>;
 			realtek,ldo1-en-gpios =
 				<&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/tegra30-colibri-eval-v3.dts

@@ -56,11 +56,11 @@ pwm@7000a000 {
 	 */
 	i2c@7000c000 {
 		status = "okay";
-		clock-frequency = <100000>;
+		clock-frequency = <400000>;
 
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
-			compatible = "st,m41t00";
+			compatible = "st,m41t0";
 			reg = <0x68>;
 		};
 	};
@@ -79,7 +79,7 @@ can0: can@0 {
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>;
 			spi-max-frequency = <10000000>;
 		};
 		spidev0: spi@1 {

arch/arm/boot/dts/tegra30-colibri.dtsi

@@ -215,7 +215,7 @@ pv0 {
 	};
 
 	hdmiddc: i2c@7000c700 {
-		clock-frequency = <100000>;
+		clock-frequency = <10000>;
 	};
 
 	/*
@@ -363,7 +363,6 @@ stmpe811@41 {
 
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
-				reg = <0>;
 				/* 3.25 MHz ADC clock speed */
 				st,adc-freq = <1>;
 				/* 8 sample average control */

arch/arm/boot/dts/tegra30.dtsi

@@ -91,6 +91,19 @@ pci@3,0 {
 		};
 	};
 
+	iram@40000000 {
+		compatible = "mmio-sram";
+		reg = <0x40000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000>;
+
+		vde_pool: vde@400 {
+			reg = <0x400 0x3fc00>;
+			pool;
+		};
+	};
+
 	host1x@50000000 {
 		compatible = "nvidia,tegra30-host1x", "simple-bus";
 		reg = <0x50000000 0x00024000>;
@@ -358,6 +371,28 @@ gpio: gpio@6000d000 {
 		*/
 	};
 
+	vde@6001a000 {
+		compatible = "nvidia,tegra30-vde", "nvidia,tegra20-vde";
+		reg = <0x6001a000 0x1000   /* Syntax Engine */
+		       0x6001b000 0x1000   /* Video Bitstream Engine */
+		       0x6001c000  0x100   /* Macroblock Engine */
+		       0x6001c200  0x100   /* Post-processing Engine */
+		       0x6001c400  0x100   /* Motion Compensation Engine */
+		       0x6001c600  0x100   /* Transform Engine */
+		       0x6001c800  0x100   /* Pixel prediction block */
+		       0x6001ca00  0x100   /* Video DMA */
+		       0x6001d800  0x400>; /* Video frame controls */
+		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+			    "tfe", "ppb", "vdma", "frameid";
+		iram = <&vde_pool>; /* IRAM region */
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
+		interrupt-names = "sync-token", "bsev", "sxe";
+		clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		resets = <&tegra_car 61>;
+	};
+
 	apbmisc@70000800 {
 		compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc";
 		reg = <0x70000800 0x64   /* Chip revision */