mmc: mxs-mmc: Fix additional cycles after transmission stop

commit 01167c7b upstream.

According to the code the intention is to append 8 SCK cycles
instead of 4 at end of a MMC_STOP_TRANSMISSION command. But this
will never happened because it's an AC command not an ADTC command.
So fix this by moving the statement into the right function.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: e4243f13 (mmc: mxs-mmc: add mmc host driver for i.MX23/28)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

drivers/mmc/host/mxs-mmc.c

@@ -315,6 +315,9 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host)
 	cmd0 = BF_SSP(cmd->opcode, CMD0_CMD);
 	cmd1 = cmd->arg;
 
+	if (cmd->opcode == MMC_STOP_TRANSMISSION)
+		cmd0 |= BM_SSP_CMD0_APPEND_8CYC;
+
 	if (host->sdio_irq_en) {
 		ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
 		cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN;
@@ -423,8 +426,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
 		       ssp->base + HW_SSP_BLOCK_SIZE);
 	}
 
-	if ((cmd->opcode == MMC_STOP_TRANSMISSION) ||
-	    (cmd->opcode == SD_IO_RW_EXTENDED))
+	if (cmd->opcode == SD_IO_RW_EXTENDED)
 		cmd0 |= BM_SSP_CMD0_APPEND_8CYC;
 
 	cmd1 = cmd->arg;