Commit b51c4354 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'regulator-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A very small set of updates for the regulator API this time around,
  there's a few bug fixes and also:

   - Conversion of the regulator API to use GPIO descriptors rather than
     numbers from Linus Walleij.

   - New drivers for Marvell 88PG86x and Qualcomm PM8998 and PMI8998"

* tag 'regulator-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom: smd: Add pm8998 and pmi8998 regulators
  regulator: core: Add missing blank line between functions
  regulator: qcom_smd: Drop regulator/{machine,of_regulator} includes
  regulator: giving regulator controlling gpios a non-empty label when used through the devicetree.
  regulator: gpio: Fix some error handling paths in 'gpio_regulator_probe()'
  regulator: 88pg86x: new i2c dual regulator chip
  regulator: 88pg86x: add DT bindings document
  regulator: da9211: Pass descriptors instead of GPIO numbers
  regulator: da9055: Pass descriptor instead of GPIO number
  regulator: core: Support passing an initialized GPIO enable descriptor
  regulator: dt: regulator-name is required property
  regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'
parents ffd776bf 36fd679f
Marvell 88PG867/88PG868 voltage regulators
Required properties:
- compatible: one of "marvell,88pg867", "marvell,88pg868";
- reg: I2C slave address.
Optional subnodes for regulators: "buck1", "buck2", using common regulator
bindings given in <Documentation/devicetree/bindings/regulator/regulator.txt>.
Example:
pg868@19 {
compatible = "marvell,88pg868";
reg = <0x19>;
vcpu: buck1 {
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1350000>;
};
};
......@@ -2,6 +2,7 @@ Fixed Voltage regulators
Required properties:
- compatible: Must be "regulator-fixed";
- regulator-name: Defined in regulator.txt as optional, but required here.
Optional properties:
- gpio: gpio to use for enable control
......
......@@ -2,6 +2,8 @@ GPIO controlled regulators
Required properties:
- compatible : Must be "regulator-gpio".
- regulator-name : Defined in regulator.txt as optional, but required
here.
- states : Selection of available voltages and GPIO configs.
if there are no states, then use a fixed regulator
......
......@@ -23,7 +23,9 @@ Regulator nodes are identified by their compatible:
"qcom,rpm-pm8916-regulators"
"qcom,rpm-pm8941-regulators"
"qcom,rpm-pm8994-regulators"
"qcom,rpm-pm8998-regulators"
"qcom,rpm-pma8084-regulators"
"qcom,rpm-pmi8998-regulators"
- vdd_s1-supply:
- vdd_s2-supply:
......@@ -119,6 +121,38 @@ Regulator nodes are identified by their compatible:
Definition: reference to regulator supplying the input pin, as
described in the data sheet
- vdd_s1-supply:
- vdd_s2-supply:
- vdd_s3-supply:
- vdd_s4-supply:
- vdd_s5-supply:
- vdd_s6-supply:
- vdd_s7-supply:
- vdd_s8-supply:
- vdd_s9-supply:
- vdd_s10-supply:
- vdd_s11-supply:
- vdd_s12-supply:
- vdd_s13-supply:
- vdd_l1_l27-supply:
- vdd_l20_l24-supply:
- vdd_l26-supply:
- vdd_l2_l8_l17-supply:
- vdd_l3_l11-supply:
- vdd_l4_l5-supply:
- vdd_l6-supply:
- vdd_l7_l12_l14_l15-supply:
- vdd_l9-supply:
- vdd_l10_l23_l25-supply:
- vdd_l13_l19_l21-supply:
- vdd_l16_l28-supply:
- vdd_l18_l22-supply:
- vdd_lvs1_lvs2-supply:
Usage: optional (pmi8998 only)
Value type: <phandle>
Definition: reference to regulator supplying the input pin, as
described in the data sheet
- vdd_s1-supply:
- vdd_s2-supply:
- vdd_s3-supply:
......@@ -148,6 +182,12 @@ Regulator nodes are identified by their compatible:
Definition: reference to regulator supplying the input pin, as
described in the data sheet
- vdd_bob-supply:
Usage: optional (pmi8998 only)
Value type: <phandle>
Definition: reference to regulator supplying the input pin, as
described in the data sheet
The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
of the pmics below.
......@@ -169,11 +209,19 @@ pm8994:
l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
pm8998:
s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2, l3, l4,
l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2
pma8084:
s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
pmi8998:
bob
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt.
......
// SPDX-License-Identifier: GPL-2.0
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/of.h>
#include <linux/regulator/driver.h>
#include <linux/regmap.h>
static const struct regulator_ops pg86x_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear_range,
};
static const struct regulator_linear_range pg86x_buck1_ranges[] = {
REGULATOR_LINEAR_RANGE( 0, 0, 10, 0),
REGULATOR_LINEAR_RANGE(1000000, 11, 34, 25000),
REGULATOR_LINEAR_RANGE(1600000, 35, 47, 50000),
};
static const struct regulator_linear_range pg86x_buck2_ranges[] = {
REGULATOR_LINEAR_RANGE( 0, 0, 15, 0),
REGULATOR_LINEAR_RANGE(1000000, 16, 39, 25000),
REGULATOR_LINEAR_RANGE(1600000, 40, 52, 50000),
};
static const struct regulator_desc pg86x_regulators[] = {
{
.id = 0,
.type = REGULATOR_VOLTAGE,
.name = "buck1",
.of_match = of_match_ptr("buck1"),
.n_voltages = 11 + 24 + 13,
.linear_ranges = pg86x_buck1_ranges,
.n_linear_ranges = 3,
.vsel_reg = 0x24,
.vsel_mask = 0xff,
.ops = &pg86x_ops,
.owner = THIS_MODULE
},
{
.id = 1,
.type = REGULATOR_VOLTAGE,
.name = "buck2",
.of_match = of_match_ptr("buck2"),
.n_voltages = 16 + 24 + 13,
.linear_ranges = pg86x_buck2_ranges,
.n_linear_ranges = 3,
.vsel_reg = 0x13,
.vsel_mask = 0xff,
.ops = &pg86x_ops,
.owner = THIS_MODULE
},
};
static const struct regmap_config pg86x_regmap = {
.reg_bits = 8,
.val_bits = 8,
};
static int pg86x_i2c_probe(struct i2c_client *i2c)
{
int id, ret;
struct regulator_config config = {.dev = &i2c->dev};
struct regmap *regmap = devm_regmap_init_i2c(i2c, &pg86x_regmap);
if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
return ret;
}
for (id = 0; id < ARRAY_SIZE(pg86x_regulators); id++) {
struct regulator_dev *rdev;
rdev = devm_regulator_register(&i2c->dev,
&pg86x_regulators[id],
&config);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(&i2c->dev, "failed to register %s: %d\n",
pg86x_regulators[id].name, ret);
return ret;
}
}
return 0;
}
static const struct of_device_id pg86x_dt_ids [] = {
{ .compatible = "marvell,88pg867" },
{ .compatible = "marvell,88pg868" },
{ }
};
MODULE_DEVICE_TABLE(of, pg86x_dt_ids);
static const struct i2c_device_id pg86x_i2c_id[] = {
{ "88pg867", },
{ "88pg868", },
{ }
};
MODULE_DEVICE_TABLE(i2c, pg86x_i2c_id);
static struct i2c_driver pg86x_regulator_driver = {
.driver = {
.name = "88pg86x",
.of_match_table = of_match_ptr(pg86x_dt_ids),
},
.probe_new = pg86x_i2c_probe,
.id_table = pg86x_i2c_id,
};
module_i2c_driver(pg86x_regulator_driver);
MODULE_DESCRIPTION("Marvell 88PG86X voltage regulator");
MODULE_AUTHOR("Alexander Monakov <amonakov@gmail.com>");
MODULE_LICENSE("GPL");
......@@ -54,6 +54,15 @@ config REGULATOR_USERSPACE_CONSUMER
If unsure, say no.
config REGULATOR_88PG86X
tristate "Marvell 88PG86X voltage regulators"
depends on I2C
select REGMAP_I2C
help
This driver supports Marvell 88PG867 and 88PG868 voltage regulators.
They provide two I2C-controlled DC/DC step-down converters with
sleep mode and separate enable pins.
config REGULATOR_88PM800
tristate "Marvell 88PM800 Power regulators"
depends on MFD_88PM800
......
......@@ -10,6 +10,7 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
obj-$(CONFIG_REGULATOR_88PG86X) += 88pg86x.o
obj-$(CONFIG_REGULATOR_88PM800) += 88pm800.o
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
......
......@@ -1937,7 +1937,10 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev,
struct gpio_desc *gpiod;
int ret;
gpiod = gpio_to_desc(config->ena_gpio);
if (config->ena_gpiod)
gpiod = config->ena_gpiod;
else
gpiod = gpio_to_desc(config->ena_gpio);
list_for_each_entry(pin, &regulator_ena_gpio_list, list) {
if (pin->gpiod == gpiod) {
......@@ -1947,15 +1950,18 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev,
}
}
ret = gpio_request_one(config->ena_gpio,
GPIOF_DIR_OUT | config->ena_gpio_flags,
rdev_get_name(rdev));
if (ret)
return ret;
if (!config->ena_gpiod) {
ret = gpio_request_one(config->ena_gpio,
GPIOF_DIR_OUT | config->ena_gpio_flags,
rdev_get_name(rdev));
if (ret)
return ret;
}
pin = kzalloc(sizeof(struct regulator_enable_gpio), GFP_KERNEL);
if (pin == NULL) {
gpio_free(config->ena_gpio);
if (!config->ena_gpiod)
gpio_free(config->ena_gpio);
return -ENOMEM;
}
......@@ -4154,8 +4160,9 @@ regulator_register(const struct regulator_desc *regulator_desc,
goto clean;
}
if ((config->ena_gpio || config->ena_gpio_initialized) &&
gpio_is_valid(config->ena_gpio)) {
if (config->ena_gpiod ||
((config->ena_gpio || config->ena_gpio_initialized) &&
gpio_is_valid(config->ena_gpio))) {
mutex_lock(&regulator_list_mutex);
ret = regulator_ena_gpio_request(rdev, config);
mutex_unlock(&regulator_list_mutex);
......@@ -4301,6 +4308,7 @@ static int regulator_suspend_late(struct device *dev)
return class_for_each_device(&regulator_class, NULL, &state,
_regulator_suspend_late);
}
static int _regulator_resume_early(struct device *dev, void *data)
{
int ret = 0;
......
......@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
......@@ -455,8 +456,7 @@ static int da9055_gpio_init(struct da9055_regulator *regulator,
char name[18];
int gpio_mux = pdata->gpio_ren[id];
config->ena_gpio = pdata->ena_gpio[id];
config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
config->ena_gpiod = pdata->ena_gpiods[id];
config->ena_gpio_invert = 1;
/*
......
......@@ -15,7 +15,6 @@
*/
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/init.h>
......@@ -25,7 +24,7 @@
#include <linux/regmap.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/of_gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/da9211.h>
#include "da9211-regulator.h"
......@@ -294,9 +293,12 @@ static struct da9211_pdata *da9211_parse_regulators_dt(
pdata->init_data[n] = da9211_matches[i].init_data;
pdata->reg_node[n] = da9211_matches[i].of_node;
pdata->gpio_ren[n] =
of_get_named_gpio(da9211_matches[i].of_node,
"enable-gpios", 0);
pdata->gpiod_ren[n] = devm_gpiod_get_from_of_node(dev,
da9211_matches[i].of_node,
"enable",
0,
GPIOD_OUT_HIGH,
"da9211-enable");
n++;
}
......@@ -382,13 +384,10 @@ static int da9211_regulator_init(struct da9211 *chip)
config.regmap = chip->regmap;
config.of_node = chip->pdata->reg_node[i];
if (gpio_is_valid(chip->pdata->gpio_ren[i])) {
config.ena_gpio = chip->pdata->gpio_ren[i];
config.ena_gpio_initialized = true;
} else {
config.ena_gpio = -EINVAL;
config.ena_gpio_initialized = false;
}
if (chip->pdata->gpiod_ren[i])
config.ena_gpiod = chip->pdata->gpiod_ren[i];
else
config.ena_gpiod = NULL;
chip->rdev[i] = devm_regulator_register(chip->dev,
&da9211_regulators[i], &config);
......
......@@ -196,6 +196,7 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
break;
}
config->gpios[i].gpio = gpio;
config->gpios[i].label = config->supply_name;
if (proplen > 0) {
of_property_read_u32_index(np, "gpios-states",
i, &ret);
......@@ -271,8 +272,7 @@ static int gpio_regulator_probe(struct platform_device *pdev)
drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
if (drvdata->desc.name == NULL) {
dev_err(&pdev->dev, "Failed to allocate supply name\n");
ret = -ENOMEM;
goto err;
return -ENOMEM;
}
if (config->nr_gpios != 0) {
......@@ -292,7 +292,7 @@ static int gpio_regulator_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"Could not obtain regulator setting GPIOs: %d\n",
ret);
goto err_memstate;
goto err_memgpio;
}
}
......@@ -303,7 +303,7 @@ static int gpio_regulator_probe(struct platform_device *pdev)
if (drvdata->states == NULL) {
dev_err(&pdev->dev, "Failed to allocate state data\n");
ret = -ENOMEM;
goto err_memgpio;
goto err_stategpio;
}
drvdata->nr_states = config->nr_states;
......@@ -324,7 +324,7 @@ static int gpio_regulator_probe(struct platform_device *pdev)
default:
dev_err(&pdev->dev, "No regulator type set\n");
ret = -EINVAL;
goto err_memgpio;
goto err_memstate;
}
/* build initial state from gpio init data. */
......@@ -361,22 +361,21 @@ static int gpio_regulator_probe(struct platform_device *pdev)
if (IS_ERR(drvdata->dev)) {
ret = PTR_ERR(drvdata->dev);
dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
goto err_stategpio;
goto err_memstate;
}
platform_set_drvdata(pdev, drvdata);
return 0;
err_stategpio:
gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
err_memstate:
kfree(drvdata->states);
err_stategpio:
gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
err_memgpio:
kfree(drvdata->gpios);
err_name:
kfree(drvdata->desc.name);
err:
return ret;
}
......
......@@ -321,6 +321,7 @@ int of_regulator_match(struct device *dev, struct device_node *node,
dev_err(dev,
"failed to parse DT for regulator %s\n",
child->name);
of_node_put(child);
return -EINVAL;
}
match->of_node = of_node_get(child);
......
......@@ -17,8 +17,6 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/soc/qcom/smd-rpm.h>
struct qcom_rpm_reg {
......@@ -165,6 +163,15 @@ static const struct regulator_ops rpm_switch_ops = {
.is_enabled = rpm_reg_is_enabled,
};
static const struct regulator_ops rpm_bob_ops = {
.enable = rpm_reg_enable,
.disable = rpm_reg_disable,
.is_enabled = rpm_reg_is_enabled,
.get_voltage = rpm_reg_get_voltage,
.set_voltage = rpm_reg_set_voltage,
};
static const struct regulator_desc pma8084_hfsmps = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500),
......@@ -355,6 +362,64 @@ static const struct regulator_desc pm8994_lnldo = {
.ops = &rpm_smps_ldo_ops_fixed,
};
static const struct regulator_desc pm8998_ftsmps = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000),
},
.n_linear_ranges = 1,
.n_voltages = 259,
.ops = &rpm_smps_ldo_ops,
};
static const struct regulator_desc pm8998_hfsmps = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
},
.n_linear_ranges = 1,
.n_voltages = 216,
.ops = &rpm_smps_ldo_ops,
};
static const struct regulator_desc pm8998_nldo = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000),
},
.n_linear_ranges = 1,
.n_voltages = 128,
.ops = &rpm_smps_ldo_ops,
};
static const struct regulator_desc pm8998_pldo = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE(1664000, 0, 255, 8000),
},
.n_linear_ranges = 1,
.n_voltages = 256,
.ops = &rpm_smps_ldo_ops,
};
static const struct regulator_desc pm8998_pldo_lv = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE(1256000, 0, 127, 8000),
},
.n_linear_ranges = 1,
.n_voltages = 128,
.ops = &rpm_smps_ldo_ops,
};
static const struct regulator_desc pm8998_switch = {
.ops = &rpm_switch_ops,
};
static const struct regulator_desc pmi8998_bob = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE(1824000, 0, 83, 32000),
},
.n_linear_ranges = 1,
.n_voltages = 84,
.ops = &rpm_bob_ops,
};
struct rpm_regulator_data {
const char *name;
u32 type;
......@@ -544,12 +609,66 @@ static const struct rpm_regulator_data rpm_pm8994_regulators[] = {
{}
};
static const struct rpm_regulator_data rpm_pm8998_regulators[] = {
{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8998_ftsmps, "vdd_s1" },
{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8998_ftsmps, "vdd_s2" },
{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm8998_hfsmps, "vdd_s3" },
{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm8998_hfsmps, "vdd_s4" },
{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm8998_hfsmps, "vdd_s5" },
{ "s6", QCOM_SMD_RPM_SMPA, 6, &pm8998_ftsmps, "vdd_s6" },
{ "s7", QCOM_SMD_RPM_SMPA, 7, &pm8998_ftsmps, "vdd_s7" },
{ "s8", QCOM_SMD_RPM_SMPA, 8, &pm8998_ftsmps, "vdd_s8" },
{ "s9", QCOM_SMD_RPM_SMPA, 9, &pm8998_ftsmps, "vdd_s9" },
{ "s10", QCOM_SMD_RPM_SMPA, 10, &pm8998_ftsmps, "vdd_s10" },
{ "s11", QCOM_SMD_RPM_SMPA, 11, &pm8998_ftsmps, "vdd_s11" },
{ "s12", QCOM_SMD_RPM_SMPA, 12, &pm8998_ftsmps, "vdd_s12" },
{ "s13", QCOM_SMD_RPM_SMPA, 13, &pm8998_ftsmps, "vdd_s13" },
{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8998_nldo, "vdd_l1_l27" },
{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm8998_nldo, "vdd_l2_l8_l17" },
{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm8998_nldo, "vdd_l3_l11" },
{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm8998_nldo, "vdd_l4_l5" },
{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm8998_nldo, "vdd_l4_l5" },
{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm8998_pldo, "vdd_l6" },
{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm8998_pldo_lv, "vdd_l7_l12_l14_l15" },
{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm8998_nldo, "vdd_l2_l8_l17" },
{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8998_pldo, "vdd_l9" },
{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8998_pldo, "vdd_l10_l23_l25" },
{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm8998_nldo, "vdd_l3_l11" },
{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8998_pldo_lv, "vdd_l7_l12_l14_l15" },
{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm8998_pldo, "vdd_l13_l19_l21" },
{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm8998_pldo_lv, "vdd_l7_l12_l14_l15" },
{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm8998_pldo_lv, "vdd_l7_l12_l14_l15" },
{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm8998_pldo, "vdd_l16_l28" },
{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm8998_nldo, "vdd_l2_l8_l17" },
{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm8998_pldo, "vdd_l18_l22" },
{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm8998_pldo, "vdd_l13_l19_l21" },
{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm8998_pldo, "vdd_l20_l24" },
{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm8998_pldo, "vdd_l13_l19_l21" },
{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm8998_pldo, "vdd_l18_l22" },
{ "l23", QCOM_SMD_RPM_LDOA, 23, &pm8998_pldo, "vdd_l10_l23_l25" },
{ "l24", QCOM_SMD_RPM_LDOA, 24, &pm8998_pldo, "vdd_l20_l24" },
{ "l25", QCOM_SMD_RPM_LDOA, 25, &pm8998_pldo, "vdd_l10_l23_l25" },
{ "l26", QCOM_SMD_RPM_LDOA, 26, &pm8998_nldo, "vdd_l26" },
{ "l27", QCOM_SMD_RPM_LDOA, 27, &pm8998_nldo, "vdd_l1_l27" },
{ "l28", QCOM_SMD_RPM_LDOA, 28, &pm8998_pldo, "vdd_l16_l28" },
{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pm8998_switch, "vdd_lvs1_lvs2" },
{ "lvs2", QCOM_SMD_RPM_VSA, 2, &pm8998_switch, "vdd_lvs1_lvs2" },
{}
};
static const struct rpm_regulator_data rpm_pmi8998_regulators[] = {
{ "bob", QCOM_SMD_RPM_BOBB, 1, &pmi8998_bob, "vdd_bob" },
{}
};
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
{ .compatible = "qcom,rpm-pm8994-regulators", .data = &rpm_pm8994_regulators },
{ .compatible = "qcom,rpm-pm8998-regulators", .data = &rpm_pm8998_regulators },
{ .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators },
{ .compatible = "qcom,rpm-pmi8998-regulators", .data = &rpm_pmi8998_regulators },
{}
};
MODULE_DEVICE_TABLE(of, rpm_of_match);
......
......@@ -12,6 +12,7 @@
#define DA9055_MAX_REGULATORS 8
struct da9055;
struct gpio_desc;
enum gpio_select {
NO_GPIO = 0,
......@@ -47,7 +48,7 @@ struct da9055_pdata {
* controls the regulator set A/B, 0 if not available.
*/
enum gpio_select *reg_rsel;
/* GPIOs to enable regulator, 0 if not available */
int *ena_gpio;
/* GPIO descriptors to enable regulator, NULL if not available */
struct gpio_desc **ena_gpiods;
};
#endif /* __DA9055_PDATA_H */
......@@ -21,6 +21,8 @@
#define DA9211_MAX_REGULATORS 2
struct gpio_desc;
enum da9211_chip_id {
DA9211,
DA9212,
......@@ -39,7 +41,7 @@ struct da9211_pdata {
* 2 : 2 phase 2 buck
*/
int num_buck;
int gpio_ren[DA9211_MAX_REGULATORS];
struct gpio_desc *gpiod_ren[DA9211_MAX_REGULATORS];
struct device_node *reg_node[DA9211_MAX_REGULATORS];
struct regulator_init_data *init_data[DA9211_MAX_REGULATORS];
};
......
......@@ -19,6 +19,7 @@
#include <linux/notifier.h>
#include <linux/regulator/consumer.h>
struct gpio_desc;
struct regmap;
struct regulator_dev;
struct regulator_config;
......@@ -387,6 +388,7 @@ struct regulator_desc {
* initialized, meaning that >= 0 is a valid gpio
* identifier and < 0 is a non existent gpio.
* @ena_gpio: GPIO controlling regulator enable.
* @ena_gpiod: GPIO descriptor controlling regulator enable.
* @ena_gpio_invert: Sense for GPIO enable control.
* @ena_gpio_flags: Flags to use when calling gpio_request_one()
*/
......@@ -399,6 +401,7 @@ struct regulator_config {
bool ena_gpio_initialized;
int ena_gpio;
struct gpio_desc *ena_gpiod;
unsigned int ena_gpio_invert:1;
unsigned int ena_gpio_flags;
};
......
......@@ -10,6 +10,7 @@ struct qcom_smd_rpm;
/*
* Constants used for addressing resources in the RPM.
*/
#define QCOM_SMD_RPM_BOBB 0x62626f62
#define QCOM_SMD_RPM_BOOST 0x61747362
#define QCOM_SMD_RPM_BUS_CLK 0x316b6c63
#define QCOM_SMD_RPM_BUS_MASTER 0x73616d62
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment