Merge tag 'usb-serial-4.12-rc2' of...

Merge tag 'usb-serial-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for v4.12-rc2

Here's a fix for a long-standing issue in the ftdi_sio driver that
prevented unprivileged users from updating the low-latency flag,
something which became apparent after a recent change that restored the
older setting of not using low-latency mode by default.

A run of sparse revealed a couple of endianness issues that are now
fixed, and addressed is also a user-triggerable division-by-zero in
io_ti when debugging is enabled.

Finally there are some new device ids, including a simplification of how
we deal with a couple of older Olimex JTAG adapters.

All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>

drivers/usb/serial/ftdi_sio.c

@@ -809,10 +809,10 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
 	{ USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) },
 	{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
@@ -1527,9 +1527,9 @@ static int set_serial_info(struct tty_struct *tty,
 					(new_serial.flags & ASYNC_FLAGS));
 	priv->custom_divisor = new_serial.custom_divisor;
 
+check_and_exit:
 	write_latency_timer(port);
 
-check_and_exit:
 	if ((old_priv.flags & ASYNC_SPD_MASK) !=
 	     (priv->flags & ASYNC_SPD_MASK)) {
 		if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)

drivers/usb/serial/ftdi_sio_ids.h

@@ -882,6 +882,8 @@
 /* Olimex */
 #define OLIMEX_VID			0x15BA
 #define OLIMEX_ARM_USB_OCD_PID		0x0003
+#define OLIMEX_ARM_USB_TINY_PID	0x0004
+#define OLIMEX_ARM_USB_TINY_H_PID	0x002a
 #define OLIMEX_ARM_USB_OCD_H_PID	0x002b
 
 /*

drivers/usb/serial/io_ti.c

@@ -2336,8 +2336,11 @@ static void change_port_settings(struct tty_struct *tty,
 	if (!baud) {
 		/* pick a default, any default... */
 		baud = 9600;
-	} else
+	} else {
+		/* Avoid a zero divisor. */
+		baud = min(baud, 461550);
 		tty_encode_baud_rate(tty, baud, baud);
+	}
 
 	edge_port->baud_rate = baud;
 	config->wBaudRate = (__u16)((461550L + baud/2) / baud);

drivers/usb/serial/ir-usb.c

@@ -197,6 +197,7 @@ static u8 ir_xbof_change(u8 xbof)
 static int ir_startup(struct usb_serial *serial)
 {
 	struct usb_irda_cs_descriptor *irda_desc;
+	int rates;
 
 	irda_desc = irda_usb_find_class_desc(serial, 0);
 	if (!irda_desc) {
@@ -205,18 +206,20 @@ static int ir_startup(struct usb_serial *serial)
 		return -ENODEV;
 	}
 
+	rates = le16_to_cpu(irda_desc->wBaudRate);
+
 	dev_dbg(&serial->dev->dev,
 		"%s - Baud rates supported:%s%s%s%s%s%s%s%s%s\n",
 		__func__,
-		(irda_desc->wBaudRate & USB_IRDA_BR_2400) ? " 2400" : "",
-		(irda_desc->wBaudRate & USB_IRDA_BR_9600) ? " 9600" : "",
-		(irda_desc->wBaudRate & USB_IRDA_BR_19200) ? " 19200" : "",
-		(irda_desc->wBaudRate & USB_IRDA_BR_38400) ? " 38400" : "",
-		(irda_desc->wBaudRate & USB_IRDA_BR_57600) ? " 57600" : "",
-		(irda_desc->wBaudRate & USB_IRDA_BR_115200) ? " 115200" : "",
-		(irda_desc->wBaudRate & USB_IRDA_BR_576000) ? " 576000" : "",
-		(irda_desc->wBaudRate & USB_IRDA_BR_1152000) ? " 1152000" : "",
-		(irda_desc->wBaudRate & USB_IRDA_BR_4000000) ? " 4000000" : "");
+		(rates & USB_IRDA_BR_2400) ? " 2400" : "",
+		(rates & USB_IRDA_BR_9600) ? " 9600" : "",
+		(rates & USB_IRDA_BR_19200) ? " 19200" : "",
+		(rates & USB_IRDA_BR_38400) ? " 38400" : "",
+		(rates & USB_IRDA_BR_57600) ? " 57600" : "",
+		(rates & USB_IRDA_BR_115200) ? " 115200" : "",
+		(rates & USB_IRDA_BR_576000) ? " 576000" : "",
+		(rates & USB_IRDA_BR_1152000) ? " 1152000" : "",
+		(rates & USB_IRDA_BR_4000000) ? " 4000000" : "");
 
 	switch (irda_desc->bmAdditionalBOFs) {
 	case USB_IRDA_AB_48:

drivers/usb/serial/mct_u232.c

@@ -189,7 +189,7 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
 		return -ENOMEM;
 
 	divisor = mct_u232_calculate_baud_rate(serial, value, &speed);
-	put_unaligned_le32(cpu_to_le32(divisor), buf);
+	put_unaligned_le32(divisor, buf);
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				MCT_U232_SET_BAUD_RATE_REQUEST,
 				MCT_U232_SET_REQUEST_TYPE,

drivers/usb/serial/option.c

@@ -281,6 +281,7 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_PRODUCT_LE922_USBCFG0		0x1042
 #define TELIT_PRODUCT_LE922_USBCFG3		0x1043
 #define TELIT_PRODUCT_LE922_USBCFG5		0x1045
+#define TELIT_PRODUCT_ME910			0x1100
 #define TELIT_PRODUCT_LE920			0x1200
 #define TELIT_PRODUCT_LE910			0x1201
 #define TELIT_PRODUCT_LE910_USBCFG4		0x1206
@@ -640,6 +641,11 @@ static const struct option_blacklist_info simcom_sim7100e_blacklist = {
 	.reserved = BIT(5) | BIT(6),
 };
 
+static const struct option_blacklist_info telit_me910_blacklist = {
+	.sendsetup = BIT(0),
+	.reserved = BIT(1) | BIT(3),
+};
+
 static const struct option_blacklist_info telit_le910_blacklist = {
 	.sendsetup = BIT(0),
 	.reserved = BIT(1) | BIT(2),
@@ -1235,6 +1241,8 @@ static const struct usb_device_id option_ids[] = {
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
+		.driver_info = (kernel_ulong_t)&telit_me910_blacklist },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
 		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),

drivers/usb/serial/qcserial.c

@@ -162,6 +162,8 @@ static const struct usb_device_id id_table[] = {
 	{DEVICE_SWI(0x1199, 0x9071)},	/* Sierra Wireless MC74xx */
 	{DEVICE_SWI(0x1199, 0x9078)},	/* Sierra Wireless EM74xx */
 	{DEVICE_SWI(0x1199, 0x9079)},	/* Sierra Wireless EM74xx */
+	{DEVICE_SWI(0x1199, 0x907a)},	/* Sierra Wireless EM74xx QDL */
+	{DEVICE_SWI(0x1199, 0x907b)},	/* Sierra Wireless EM74xx */
 	{DEVICE_SWI(0x413c, 0x81a2)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a3)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a4)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */