Commit b5e1438c authored by Axel Haslam's avatar Axel Haslam Committed by Sekhar Nori

ARM: davinci: da830-evm: use gpio descriptor for mmc pins

Currently the mmc driver is polling the gpio to know if the
card was removed.

By using a gpio descriptor instead of the platform callbacks,
the driver will be able to register the gpio using the mmc core
APIs designed for this purpose.

This has the advantage that an irq will be registered, and
polling is no longer needed. Also, a dependency on platform
callbacks is removed for this board.
Signed-off-by: default avatarAxel Haslam <ahaslam@baylibre.com>
[nsekhar@ti.com: minor commit message edit]
Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
parent bdf0e836
...@@ -14,6 +14,7 @@ ...@@ -14,6 +14,7 @@
#include <linux/console.h> #include <linux/console.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/i2c/pcf857x.h> #include <linux/i2c/pcf857x.h>
...@@ -204,22 +205,16 @@ static const short da830_evm_mmc_sd_pins[] = { ...@@ -204,22 +205,16 @@ static const short da830_evm_mmc_sd_pins[] = {
-1 -1
}; };
#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) static struct gpiod_lookup_table mmc_gpios_table = {
#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2) .dev_id = "da830-mmc.0",
.table = {
static int da830_evm_mmc_get_ro(int index) /* gpio chip 1 contains gpio range 32-63 */
{ GPIO_LOOKUP("davinci_gpio.1", 2, "cd", GPIO_ACTIVE_LOW),
return gpio_get_value(DA830_MMCSD_WP_PIN); GPIO_LOOKUP("davinci_gpio.1", 1, "wp", GPIO_ACTIVE_LOW),
} },
};
static int da830_evm_mmc_get_cd(int index)
{
return !gpio_get_value(DA830_MMCSD_CD_PIN);
}
static struct davinci_mmc_config da830_evm_mmc_config = { static struct davinci_mmc_config da830_evm_mmc_config = {
.get_ro = da830_evm_mmc_get_ro,
.get_cd = da830_evm_mmc_get_cd,
.wires = 8, .wires = 8,
.max_freq = 50000000, .max_freq = 50000000,
.caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
...@@ -235,26 +230,12 @@ static inline void da830_evm_init_mmc(void) ...@@ -235,26 +230,12 @@ static inline void da830_evm_init_mmc(void)
return; return;
} }
ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP"); gpiod_add_lookup_table(&mmc_gpios_table);
if (ret) {
pr_warn("%s: can not open GPIO %d\n",
__func__, DA830_MMCSD_WP_PIN);
return;
}
gpio_direction_input(DA830_MMCSD_WP_PIN);
ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n");
if (ret) {
pr_warn("%s: can not open GPIO %d\n",
__func__, DA830_MMCSD_CD_PIN);
return;
}
gpio_direction_input(DA830_MMCSD_CD_PIN);
ret = da8xx_register_mmcsd0(&da830_evm_mmc_config); ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
if (ret) { if (ret) {
pr_warn("%s: mmc/sd registration failed: %d\n", __func__, ret); pr_warn("%s: mmc/sd registration failed: %d\n", __func__, ret);
gpio_free(DA830_MMCSD_WP_PIN); gpiod_remove_lookup_table(&mmc_gpios_table);
} }
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment