ARM: tegra: Use proper IRQ type definitions

This switches a few interrupt definitions that were using either
GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW as IRQ type, which is invalid.

This is mostly a cosmetic change, that doesn't affect any driver.

Analogous to Paul's commit 38333641 ("ARM: tegra: nyan: Use proper
IRQ type definitions").
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

arch/arm/boot/dts/tegra114-dalmore.dts

@@ -780,7 +780,7 @@ rt5640: rt5640@1c {
 			compatible = "realtek,rt5640";
 			reg = <0x1c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
 			realtek,ldo1-en-gpios =
 				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/tegra124-jetson-tk1.dts

@@ -1418,7 +1418,7 @@ rt5639: audio-codec@1c {
 			compatible = "realtek,rt5639";
 			reg = <0x1c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
 			realtek,ldo1-en-gpios =
 				<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/tegra124-venice2.dts

@@ -613,7 +613,7 @@ acodec: audio-codec@10 {
 			compatible = "maxim,max98090";
 			reg = <0x10>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
 		};
 	};
 
@@ -859,7 +859,7 @@ charger: bq24735@9 {
 					reg = <0x9>;
 					interrupt-parent = <&gpio>;
 					interrupts = <TEGRA_GPIO(J, 0)
-							GPIO_ACTIVE_HIGH>;
+							IRQ_TYPE_EDGE_BOTH>;
 					ti,ac-detect-gpios = <&gpio
 							TEGRA_GPIO(J, 0)
 							GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/tegra30-apalis.dtsi

@@ -657,7 +657,7 @@ can@1 {
 			reg = <1>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>;
 			spi-max-frequency = <10000000>;
 		};
 	};
@@ -672,7 +672,7 @@ can@0 {
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
 			spi-max-frequency = <10000000>;
 		};
 	};

arch/arm/boot/dts/tegra30-beaver.dts

@@ -1762,7 +1762,7 @@ rt5640: rt5640@1c {
 			compatible = "realtek,rt5640";
 			reg = <0x1c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_FALLING>;
 			realtek,ldo1-en-gpios =
 				<&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
 		};

arch/arm/boot/dts/tegra30-colibri-eval-v3.dts

@@ -79,7 +79,7 @@ can0: can@0 {
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>;
 			spi-max-frequency = <10000000>;
 		};
 		spidev0: spi@1 {